ÜGÜmit Güler

Ümit Güler

*This is an algorithmically generated author record based on publicly available information.

Ümit Güler has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Conformal Phased-Array Antenna Design for Enhanced LEO-to-GEO Inter-Satellite Communications

    by Ümit Güler, Tansu Filik, Alper Çabuk

    This study presents the design of a Conformal Phased-Array Atenna (CPAA) for cube-shaped Low Earth Orbit (LEO) Remote Sensing (RS) satellites, aimed at enhancing Inter-Satellite Link (ISL) communication with Geostationary Earth Orbit (GEO) satellites. The analysis is carried out for Ka-band operation at 26.5 GHz, assuming a transmission-oriented link with single linear polarization under a narrowband array factor model. Various array geometries are evaluated, positioned on different surfaces with varying inter-element and inter-layer spacing. A design algorithm is proposed to optimize directivity, Side-Lobe Levels (SLL), and Half Power Beam Width (HPBW) while maintaining a fixed number of antenna elements. By strategically placing conformal arrays at the cube’s corners, rather than using a single-surface configuration, the communication window between LEO and GEO satellites is extended by up to 45.6%, while significantly reducing the SLL and enhancing the Field Of View (FOV). Additionally, the study examines the impact of inter-element and inter-layer spacing on beam sharpness and directivity. The methodology and findings are generalizable to smaller LEO satellite platforms, where element placement and conformal integration would be scaled accordingly. The findings demonstrate the potential of the proposed system to enhance ISL efficiency, providing a scalable and adaptable solution for future satellite constellations while enabling adaptive beamforming for dynamic space environments.


  • On Orbit Demonstration of Pointing Accuracy of Ground Antennas by a Flying GEO Satellite

    by Ümit Cezmi Yilmaz, Ümit Güler

    Geostationary Satellites (GEO) are being used commonly in communication market. The service providers uplink or downlink the signal by using their dedicated antennas (whether with or without tracking capability) to the GEO satellite. The satellite down-converts and amplifies the signal before sending back to the end users on Earth. Normally, the user set and adjust the uplink antenna to follow the GEO satellite movement as much as possible. As soon as there is no reduction in the link budget, this pointing assumed to be successful. On the other hand, the input power of the satellite, together with satellite longitude vs latitude, can give reasonable ideas about the accuracy of the ground antenna pointing. In the study, ground station pointing performance is shown with two different cases. One with tracking and one without tracking capability.


  • UTILIZATION OF REMOTE SENSING AND GEOGRAPHIC INFORMATION SYSTEM FOR TELECOMMUNICATION APPLICATIONS

    by Ümit Güler, Mehtap Özenen-Kavlak, Müge Demi̇r Çakir, Serhat Aydemi̇r, Hatice Selin Aydemi̇r, Şeyma Berk Acet, Hakan Oktay Aydinli, Mahdi Hassan Pashaei

    Coğrafi Bilgi Sistemleri (CBS) ve Uzaktan Algılama (UA) yöntemleri çok uzun süredir tarım, haritacılık, hidroloji, jeoloji, madencilik, ormancılık, çevre, şehircilik, afet yönetimi ve arkeoloji gibi çok farklı faaliyet alanlarında, disiplinler arası iş birliğine dayalı olarak farklı yöntemlerle birlikte kullanılmaktadır. UA tarafında farklı mekânsal, spektral, radyometrik ve zamansal çözünürlüğe sahip algılayıcılardan elde edilen fotoğraflar kullanılarak çok çeşitli analizler yapılmakta, bunun sonucunda da planlama süreçleri yürütülmektedir. CBS alanında ise özel yazılım, donanım ve veri tabanı sistemleri kullanılarak coğrafi analizler yapılması noktasında her türlü bilginin birbiri ile ilişkilendirilmesi, işlenmesi, depolanması, analiz edilmesi ve değişiminin izlenmesi sağlanabilmektedir. Ancak haberleşme alanında UA ve CBS kullanımı incelendiğinde, dünya çapında yapılan örnekler bulunmakla birlikte Türkiye’de henüz yeni gelişmekte olan bir alan olduğu dikkat çekmektedir. Bu kapsamda düşünüldüğünde bu çalışmada literatürde Dünya ve Türkiye örneklerinin incelenmesi, UA ve CBS’nin haberleşme altyapı sistemlerinin tasarımı, planlanması, gerekli analizlerinin yapılması ve karar destek süreçlerine katkısının irdelenmesi amaçlanmaktadır. Bu sayede alanında yapılacak olan çalışmalara altlık teşkil edecek örnek bir çalışma ortaya koyulacaktır.


  • TDOA BASED TRACKING MEASUREMENT FOR GEO SATELLITES ORBIT DETERMINATION: EVALUATION FOR THE SATELLITE OPERATORS

    by İbrahim Öz, Ümit Cezmi Yilmaz, Ümit Güler

    The satellite's orbit determination has recently evolved with new tracking data and data processing methods and algorithms developments. The satellite operators need the current and future motion of the satellites for operational purposes and use various methods to measure the tracking data. This study investigates the time difference of arrival (TDOA) based ground data measurement and processing of these tracking data to obtain orbital parameters and the communication satellite operators' use of the method. First, a conceptual ground station network was established to collect TDOA based tracking data. Then these data were processed to determine the orbits using a sequential process (SP) filter method. The results were analyzed by comparing radial, in-track, and cross-track positions and velocities for three satellites at different orbital locations. The mean root mean square error (RMSE) differences of radial, in-track, and cross-track (RIC) position values of three satellites are about 19 m, 5 m, and 1 m, respectively. Similarly, the mean RMSE differences of RIC velocity values are about 0.8 cm/s, 0.15 cm/s, 0.05 cm/s respectively. These values are below the success criteria that are satellite typical flight dynamics requirements. The estimated communication satellites orbit with TDOA based observation data are fully consistent with truth orbit parameters. The satellite operators can utilize the proposed TDOA measurement method with its benefits to estimate satellite orbit.


  • Performance Assessment of a Turn Around Ranging in Communication Satellite Orbit Determination

    by İbrahim Öz, Ümit Cezmi Yilmaz, Ümit Güler

    Satellite operators utilize a two-stations turn around ranging (TAR) system to reduce the ground station measurement system's complexity and cost while having the same or better orbit determination accuracy for communication satellites orbit determination recently. This study investigates two stations' performance, four-way ranging on communication satellite orbit determination, operational conformance, and cost. The observation data sets are collected using traditional single station tracking (SST) and the new method TAR. The computed results using the Monte Carlo method encourage the satellite operators to use a four-way ranging system to observe and measure required data sets. TAR performance is evaluated, taking SST as a reference. The six classical orbital elements (a, e, i, RAAN, AoP, and TA) are compared for large numbers of observation data. The SST and TAR results are very close to each other. The worst-case calculated Euclidian distance between SST and TAR is 1.893 km at the epoch below the 6 km success criteria. The TAR observation method is appropriate to collect data sets for precise orbit determination. This work result indicates that satellite operators should consider deploying TAR stations to collect two-station range data sets and compute the orbit for nominal north-south station-keeping maneuvers (NSSK) and east-west station-keeping (EWSK) maneuver operations. The TAR method is superior to SST in terms of accuracy, operational conformance, and costs.