Sendong Ren

This study investigates the effects of welding parameters and the addition of a buffer layer on the morphology, microstructure, mechanical properties, and corrosion resistance of the overlay layer during overlay welding. This paper uses Q235 steel as the base material, ER309L as the buffer layer, and ER347 as the overlay layer to conduct process experiments on overlay welding component, aiming to obtain optimal process parameters. The effects of welding line energy and weld bead overlap rate on the morphology, dimensions, and dilution rate of the overlay layer were analyzed. Furthermore, the influence of the presence or absence of the buffer layer on the microstructure, mechanical properties, and corrosion resistance of the overlay layer was investigated. The microstructure and morphology of the overlay layer were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). Mechanical and electrochemical tests were also performed to evaluate the mechanical and corrosion resistance properties of ER347 stainless steel weld overlays. The results showed that the optimal process parameters were successfully obtained, which ensured sound weld bead formation while minimizing dilution. The addition of the buffer layer (ER309L) improved the bonding quality of the overlay welding component interface, reduced element dilution in the overlay layer, significantly improved hardness distribution, and reduced sudden changes in hardness in the fusion zone, thereby optimizing the mechanical properties of the ER347 stainless steel overlay layer. After adding the buffer layer, the corrosion current density decreased from 6.23 × 10⁻⁵ A·cm⁻² to 2.21 × 10⁻⁵ A·cm⁻², and the corrosion potential increased from −1.049 V to −0.973 V, effectively reducing the corrosion risk of the overlay component. This study innovatively introduced a buffer layer in the process of overlay welding austenitic stainless steel on low-carbon steel and investigated the impact of the overlay welding process on the overlay layer, thereby contributing to a comprehensive understanding of the overlay welding process from multiple perspectives.

In the present research, laser circle welding (LCW) was proposed to join dual-phase steel (DP980) and carbon fiber-reinforced plastic (CFRP). The welding appearance, cross-section of the welded joint and fracture surfaces were subjected to multi-scale characterizations. Joining strength was evaluated by the single-lap shear test. Moreover, a numerical model was established based on the in-house finite element (FE) code JWRIAN-Hybrid to reproduce the thermal process of LCW. The results showed that successful bonding was achieved with a laser power higher than 300 W. The largest joining strength increased to about 1353.2 N (12.2 MPa) with 450 W laser power and then decreased under higher heat input. While the welded joint always presented brittle fracture, the joining zone could be divided into a squeezed zone (SZ), molten zone (MZ) and decomposition zone (DZ). The morphology of CFRP and chemical bonding information were distinct in each subregion. The chemical reaction between the O-C=O bond on the CFRP surface and the -OH bond on the DP980 sheet provided the joining force between dissimilar materials. Additionally, the developed FE model was effective in predicting the interfacial maximum temperature distribution of LCW. The influence of laser power on the joining strength of LCW joints was dualistic in character. The joining strength variation reflected the competitive result between joining zone expansion and local bonding quality change.