AAAnna Andreeva

Anna Andreeva

*This is an algorithmically generated author record based on publicly available information.

Anna Andreeva has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Features of Modeling the Mechanical Response of Crushed Salt-Based Backfill Material in Potash Mines

    by Alexander A. Selikhov, Maxim A. Karasev, Vladislav V. Petrushin, Ekaterina L. Romanova, Anna V. Andreeva, Vadim S. Biberin, Egor S. Kudashov

    The development of potash deposits under complex mining and geological conditions requires the implementation of efficient geotechnologies, including backfilling of mined-out voids. Preserving the water-protective strata and preventing mining-induced accidents are impossible without accurate prediction of the stress–strain state of the backfill mass. Traditional models, based on the Mohr–Coulomb criterion, are unable to properly describe physical and mechanical processes occurring in crushed salt rock, including the transition from dilatancy to compaction and nonlinear hardening. This requires the application of specialized models such as the SRP model. The aim of this study is to investigate the mechanical response of crushed salt rock backfill material under complex loading conditions and to calibrate the parameters of the SRP model in order to improve the accuracy of geomechanical calculations. The shape of the plastic flow surface in the deviatoric plane was established, including both shear and cap components. A nonlinear dependence of the friction angle on mean stress was identified and described by a logarithmic function. The law of plastic hardening was determined, and a non-associated plastic flow rule was confirmed in the shear domain. The calibrated SRP model allows for predicting the backfill mass behavior with high reliability, which is a necessary condition for substantiating the parameters of safe potash mining.

  • Open Access

    Concrete Damage Plasticity Model Application to Predict Stress–Strain Behavior of Impermeable Strata in Deep Rock Salt Deposits

    by Gregorii Iovlev, Andrey Katerov, Anna Andreeva, Alisa Ageeva

    Maintaining the integrity of impermeable strata between mine workings and overlying aquifers is critical, because seepage pathways may cause mine flooding and surface subsidence. In the Upper Kama potash deposit, the impermeable sequence is a 50–140 m thick layered sequence of evaporites and clays overlying mined-out chambers. Under long-term loading, salt rocks tend to creep, soften, and localize damage, which can cause failure in the impermeable strata. In this paper, the Concrete damage-plasticity model, supplemented by the N2PC-MCT viscoplastic creep model, is applied to simulate the initiation and evolution of seepage pathways in the Upper Kama impermeable strata. Model parameters are obtained from published laboratory tests (uniaxial and triaxial compression and tension) and validated using observed ground-surface subsidence. A plane-strain finite-element model incorporates the stratified lithology, interface elements between layers, and sequential excavation. Long-term simulations up to 50 years investigate two operational scenarios: with and without backfilling. The calibrated model reproduces the main stages of surface subsidence and chamber closure. Without backfilling, simulations indicate that tensile damage localizes mainly in a stiff central salt layer of the impermeable strata, with most cracks appearing approximately between 33 and 37 years after the start of mining. With backfill, tensile crack propagation stops and damage remains stable. A hypothetical homogeneous impermeable strata case confirms that the observed central-layer cracking is associated with stiffness contrasts and composite bending in the stratified system. An approximate analytical multilayer beam solution, based on energy minimization, predicts bending stress concentration in stiff intermediate layers and is consistent with the numerical stress distribution. The combined numerical and analytical results provide insight into the mechanisms of long-term conductive fracture initiation in stratified impermeable strata and may serve as a basis for preliminary hazard indication and for planning mitigation measures, including backfilling and focused monitoring of stiff central layers. Because the study is based on a 2D plane-strain model, the quantitative estimates should be regarded as preliminary and require verification by 3D modelling and further field observations.

  • Open Access

    Concrete Damage Plasticity Model Application to Predict Stress-Strain Behavior of Waterproof Strata in Deep Rock Salt Deposits

    by Gregorii Iovlev, Andrey Katerov, Anna Andreeva, Alisa Ageeva

    Maintaining the integrity of waterproof strata (WPS) between mine workings and overlying aquifers is critical, because water-conducting cracks (WCC) may cause mine flooding and surface subsidence. In the Upper-Kama potash deposit, the WPS is a 50-140 m thick stratified sequence of evaporites and clays overlying mined-out cham-bers. Under long-term loading, salt rocks tend to creep, soften, and localize damage, which can cause WPS failure. In this paper the Concrete damage-plasticity model, supplemented by the N2PC-MCT viscoplastic creep model, is applied to simulate WCC initiation and evolution in the Upper-Kama WPS. Model parameters are obtained from published laboratory tests, in-cluding uniaxial and triaxial compression and tension, and then validated using ob-served ground-surface subsidence. A plane-strain finite-element model incorporates stratified lithology, interface elements between layers, and stepwise excavation. Long-term simulations up to 50 years investigate two operational scenarios: with and without backfilling. The calibrated model reproduces the main stages of surface subsidence and chamber closure. Without backfilling, simulations indicate that tensile damage localizes mainly in a stiff central salt layer of the WPS. Most cracks appear approximately between 33 and 37 years after the beginning of mining. With backfill, tensile crack propagation stops and damage remains stable. A hypothetical homogeneous WPS case confirms that the observed central-layer cracking is associated with stiffness contrasts and composite bending in the stratified system. An approximate analytical multilayer beam solution, based on energy minimization, predicts bending stress concentration in stiff intermediate layers and is consistent with the numerical stress distribution. The combined numerical and analytical results clarify the mechanisms of long-term WCC initiation in stratified WPS and may be used for hazard assessment and planning of mitigation measures, including backfilling and focused monitoring of stiff central layers.

  • Design of yielding support systems in salts

    by A. V. Dementyeva, M. A. Karasev

    Construction of deep mines in salts is complicated by the fact that the excavation boundary deforms constantly during the whole operational period. The deformations of the mine boundary also decrease as the size of the excavation decreases. The most complicated case is a large deep excavation in salts because the expected deformations are more than 1 m. Conventional support cannot ensure the workability of the excavation because the stresses acting in the support are much higher than the strength of the support material. It is necessary to develop a special yielding support, that can withstand the load during the entire service life of the excavation. The design of yielding support for a large deep excavation in salts is...