Hoang-Dang Le
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hoang-Dang Le has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Chi-Ngon Nguyen
Can Tho University
6 shared publications - Hsiang-Cheng Hsu
Department of Ph.D. Program in Maritime Science and Technology, College of Maritime, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan
5 shared publications Chia-Chin Chiang
4 shared publications- Chia-Chin Chiang
Department of Mechanical Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, TAIWAN
4 shared publications - Thi Thuy-Vy Nguyen
Department of Mechanical Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, TAIWAN
3 shared publications Chia-Nan Wang
1 shared publication
Latest Publications
- Open Access
- 1 March 2025
- Published by IOP Publishing in Environmental Research Communications
- Vol. 7 (3) , 035004
Early warning system for riverbank soil landslides and infrastructure protection
Rising infrastructure density and transportation networks along the riverbank landslide alter critical stress and horizontal displacement in riverbank soils, contributing to erosion. Early warning systems can detect structural changes in soil to help mitigate damage. However, there is still a lack of studies evaluating horizontal pressure in landslide masses under the influence of load and horizontal displacement causing erosion or externally induced stress. This study presents a monitoring system based on wireless transmission technology combined with sensors embedded in the soil to track the displacement of the soil mass along the riverbank. The system uses tilt, soil moisture, and earth pressure sensors to collect real-time data on the mechanical properties of the soil. Experimental results show that a load of 17.5 kPa can destabilize the slope, with tilt angles increasing significantly as soil mass shifts toward the canal. The maximum recorded horizontal soil pressure is 2.77 kPa. The analysis reveals significant discrepancies between analytical methods and finite element method (FEM) in predicting soil behavior under loads, highlighting the superior accuracy of FEM, especially at higher loads. This research contributes to developing a reliable information system for managing landslide risks as well as externally induced stress, protecting people and infrastructure.
- 1 March 2025
- Published by IOP Publishing in Environmental Research Communications
- Vol. 7 (3) , 035004
Open AccessEarly warning system for riverbank soil landslides and infrastructure protection
Rising infrastructure density and transportation networks along the riverbank landslide alter critical stress and horizontal displacement in riverbank soils, contributing to erosion. Early warning systems can detect structural changes in soil to help mitigate damage. However, there is still a lack of studies evaluating horizontal pressure in landslide masses under the influence of load and horizontal displacement causing erosion or externally induced stress. This study presents a monitoring system based on wireless transmission technology combined with sensors embedded in the soil to track the displacement of the soil mass along the riverbank. The system uses tilt, soil moisture, and earth pressure sensors to collect real-time data on the mechanical properties of the soil. Experimental results show that a load of 17.5 kPa can destabilize the slope, with tilt angles increasing significantly as soil mass shifts toward the canal. The maximum recorded horizontal soil pressure is 2.77 kPa. The analysis reveals significant discrepancies between analytical methods and finite element method (FEM) in predicting soil behavior under loads, highlighting the superior accuracy of FEM, especially at higher loads. This research contributes to developing a reliable information system for managing landslide risks as well as externally induced stress, protecting people and infrastructure.
- Open Access
- 29 October 2024
- Published by Can Tho University in CTU Journal of Innovation and Sustainable Development
- Vol. 16 (3) , 9-20
Development of the intelligent traffic light system based on image processing and fuzzy control techniques
In Viet Nam's current traffic conditions, congestion and jams—especially at intersections during peak hours—present major challenges. Traditional traffic light systems, which rely on fixed timing principles, often fail to manage traffic flow efficiently, particularly when vehicle density varies significantly across different directions. This research aims to develop an intelligent traffic light system where the signal timings automatically adjust based on the vehicle density at intersections. The study uses an object recognition algorithm to identify, classify, and count vehicles. The data was then fed into a fuzzy logic model to calculate the optimal signal timings. Experimental results demonstrate an accuracy of approximately 88% in vehicle detection. The fuzzy logic model and the programmable logic controller were able to effectively compute reasonable signal timings based on real-time vehicle density. Future developments include expanding the system's functionalities, creating a user-friendly interface, and developing a management application for mobile devices.
- 29 October 2024
- Published by Can Tho University in CTU Journal of Innovation and Sustainable Development
- Vol. 16 (3) , 9-20
Open AccessDevelopment of the intelligent traffic light system based on image processing and fuzzy control techniques
In Viet Nam's current traffic conditions, congestion and jams—especially at intersections during peak hours—present major challenges. Traditional traffic light systems, which rely on fixed timing principles, often fail to manage traffic flow efficiently, particularly when vehicle density varies significantly across different directions. This research aims to develop an intelligent traffic light system where the signal timings automatically adjust based on the vehicle density at intersections. The study uses an object recognition algorithm to identify, classify, and count vehicles. The data was then fed into a fuzzy logic model to calculate the optimal signal timings. Experimental results demonstrate an accuracy of approximately 88% in vehicle detection. The fuzzy logic model and the programmable logic controller were able to effectively compute reasonable signal timings based on real-time vehicle density. Future developments include expanding the system's functionalities, creating a user-friendly interface, and developing a management application for mobile devices.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (13) , 20617-20628
Integration of a Microfluidics System With a U-Shaped Optical Fiber Sensor for Sensing Various Concentrations of Glucose
This study introduces a successfully manufactured U-shaped optical fiber sensor integrated with a microfluidics system to detect varying glucose concentrations. It outlines the fabrication process of the microfluidics system, accomplished using a CO2 laser on polymethyl methacrylate (PMMA) material. Through three cycles of experiments involving different glucose concentrations, the results indicate a consistent trend in both resonance wavelength and transmission loss, showing an increase as glucose concentration rises from 5% to 50%. The system demonstrates a high wavelength sensitivity coefficient of 0.114 nm/% with ${R}^{{2}} =0.95$ and a notable transmission loss sensitivity of 0.09 dB/% and ${R}^{{2}} =0.94$ . This advanced system proves to be effective in achieving rapid, sensitive, and cost-efficient glucose monitoring. Consequently, the microfluidics system is deemed suitable for its intended purpose.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (13) , 20617-20628
Integration of a Microfluidics System With a U-Shaped Optical Fiber Sensor for Sensing Various Concentrations of Glucose
This study introduces a successfully manufactured U-shaped optical fiber sensor integrated with a microfluidics system to detect varying glucose concentrations. It outlines the fabrication process of the microfluidics system, accomplished using a CO2 laser on polymethyl methacrylate (PMMA) material. Through three cycles of experiments involving different glucose concentrations, the results indicate a consistent trend in both resonance wavelength and transmission loss, showing an increase as glucose concentration rises from 5% to 50%. The system demonstrates a high wavelength sensitivity coefficient of 0.114 nm/% with ${R}^{{2}} =0.95$ and a notable transmission loss sensitivity of 0.09 dB/% and ${R}^{{2}} =0.94$ . This advanced system proves to be effective in achieving rapid, sensitive, and cost-efficient glucose monitoring. Consequently, the microfluidics system is deemed suitable for its intended purpose.
- 14 November 2023
- Published by Elsevier in Measurement
- Vol. 224, 113865
A medium-high frequency FBG accelerometer based on a V-shaped flexible hinge
- 14 November 2023
- Published by Elsevier in Measurement
- Vol. 224, 113865
A medium-high frequency FBG accelerometer based on a V-shaped flexible hinge
- 1 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (14) , 15586-15596
An Optical Fiber Acceleration Sensor Based on a V-Shaped Flexure Hinge Structure
This paper proposes a novel vibration sensor based on fiber Bragg grating (FBG) technology. The sensor employs a V-shaped flexure hinge structure, which is theoretically and experimentally demonstrated to enhance sensitivity for vibration sensing. The proposed design utilizes the V-shaped flexures hinge to focus the acceleration-induced strain, resulting in improved performance for vibration sensitivity. The implementation of the FBG sensor was evaluated through theoretical computations using MATLAB. The simulation software was also used to simulate the proposed structure and assess the parameters affecting its sensing performance. The experimental results of this work sensor demonstrate a sensitivity of 79.46 pm/G and a resonant frequency of 1140 Hz. The sensor’s operating frequency bandwidth was 30–320 Hz, while the temperature influence was measured at 8.5 pm/°C. In addition, the amplitude in the transverse direction was only 3% of the amplitude in the working principle, indicating that the presented sensor has solid lateral immunity. The experimental results were consistent with the simulation findings, demonstrating the presented vibration sensor’s good performance. The given work provides an opportunity to apply the FBG acceleration sensor in the high-dependability detection of low- and medium-frequency vibration signals.
- 1 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (14) , 15586-15596
An Optical Fiber Acceleration Sensor Based on a V-Shaped Flexure Hinge Structure
This paper proposes a novel vibration sensor based on fiber Bragg grating (FBG) technology. The sensor employs a V-shaped flexure hinge structure, which is theoretically and experimentally demonstrated to enhance sensitivity for vibration sensing. The proposed design utilizes the V-shaped flexures hinge to focus the acceleration-induced strain, resulting in improved performance for vibration sensitivity. The implementation of the FBG sensor was evaluated through theoretical computations using MATLAB. The simulation software was also used to simulate the proposed structure and assess the parameters affecting its sensing performance. The experimental results of this work sensor demonstrate a sensitivity of 79.46 pm/G and a resonant frequency of 1140 Hz. The sensor’s operating frequency bandwidth was 30–320 Hz, while the temperature influence was measured at 8.5 pm/°C. In addition, the amplitude in the transverse direction was only 3% of the amplitude in the working principle, indicating that the presented sensor has solid lateral immunity. The experimental results were consistent with the simulation findings, demonstrating the presented vibration sensor’s good performance. The given work provides an opportunity to apply the FBG acceleration sensor in the high-dependability detection of low- and medium-frequency vibration signals.
- 29 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-11
A 2-D Fiber Bragg Grating Acceleration Sensor Based on Circular Flexure Hinges Structure
This work proposes and experimentally validates a 2D low- and medium-frequency fiber Bragg grating (FBG) acceleration sensor. The investigation of the vibration sensor uses a symmetrical circular flexure hinge structure with similar sensitivity in both measuring directions. The two FBGs are arranged differently to avoid a temperature impact; the sensitivity is double that of only one FBG fiber. First, the operating theory and theoretical system of the FBG accelerometer were analyzed. Second, the theoretical research and optimization improved the FBG sensor’s design, resonance frequency, and sensitivity. Third, the viability of the optimization findings and the simulation was evaluated using ANSYS software. Finally, the product was created, and the sensor calibration was performed using the simulation results. The theoretical values and experimental findings largely concur. According to performance tests, the resonance frequencies in the x- and y-direction are 440 and 500 Hz, respectively, with a flat frequency range from 20 to 300 Hz. Furthermore, the sensor shows average sensitivities along the two spatial dimensions of 124 and 83 pm/G, respectively. The overall anti-interference between the two measuring directions is less than 6%. This sensor is useful in various applications, including vibration monitoring, machine condition monitoring, and robotics.
- 29 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-11
A 2-D Fiber Bragg Grating Acceleration Sensor Based on Circular Flexure Hinges Structure
This work proposes and experimentally validates a 2D low- and medium-frequency fiber Bragg grating (FBG) acceleration sensor. The investigation of the vibration sensor uses a symmetrical circular flexure hinge structure with similar sensitivity in both measuring directions. The two FBGs are arranged differently to avoid a temperature impact; the sensitivity is double that of only one FBG fiber. First, the operating theory and theoretical system of the FBG accelerometer were analyzed. Second, the theoretical research and optimization improved the FBG sensor’s design, resonance frequency, and sensitivity. Third, the viability of the optimization findings and the simulation was evaluated using ANSYS software. Finally, the product was created, and the sensor calibration was performed using the simulation results. The theoretical values and experimental findings largely concur. According to performance tests, the resonance frequencies in the x- and y-direction are 440 and 500 Hz, respectively, with a flat frequency range from 20 to 300 Hz. Furthermore, the sensor shows average sensitivities along the two spatial dimensions of 124 and 83 pm/G, respectively. The overall anti-interference between the two measuring directions is less than 6%. This sensor is useful in various applications, including vibration monitoring, machine condition monitoring, and robotics.
- 23 March 2023
- Published by Elsevier in Optical Fiber Technology
- Vol. 78
Design and optimization of medium-high frequency FBG acceleration sensor based on symmetry flexible hinge structure
- 23 March 2023
- Published by Elsevier in Optical Fiber Technology
- Vol. 78
Design and optimization of medium-high frequency FBG acceleration sensor based on symmetry flexible hinge structure