CCCarl D. Crane

Carl D. Crane

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carl D. Crane has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Equilibrium Formulation of a 3 DOF Compliant Mechanism using Sylvester Dialytic Method of Elimination

    by Mustafa M. Mustafa, Carl D. Crane, Ibrahim Hamarash

    This paper studies the equilibrium formulation of a three degree of freedom planar compliant platform mechanism, which is in contact with a solid body in its environment. The mechanism includes two platforms, which are connected in parallel by three linear springs. The capability of deformation by manipulating both platforms exceptionally complicates the problem. The analysis aims to determine all equilibrium configurations for two different cases: FIRST CASE all three springs have zero free lengths and SECOND CASE only two of the springs have zero free lengths. The proposed procedure calculates the pose of the top platform when it is not in contact with the surface, and then detects if the top platform is in contact to determine the equilibrium configurations. To solve the geometric equations of the mechanism, we use Sylvester method of elimination. The approach obtains 4th and 48th degree polynomial equations for the first and second cases, respectively. Numerical examples have been applied to verify the process of analysis. The results, which are numerically calculated by software Maple, prove the validity of the analysis.

  • Open Access

    Kinematic Analysis of a Planar Tensegrity Mechanism

    by Jahan Bayat, Carl Crane

    This paper presents the equilibrium analysis of a planar tensegrity mechanism. The device consists of a base and top platform that are connected by one connector leg (whose length can be controlled via a prismatic joint) and two spring elements whose linear spring constants and free lengths are known. The paper presents two cases, one where the spring free lengths are both zero, and the other where the spring free lengths are nonzero. The purpose of the paper is to show the enormous increase in complexity that results from nonzero free lengths.


  • Secure Control Design for Networked Control Systems With Nonlinear Dynamics Under Time-Delay-Switch Attacks

    by Arman Sargolzaei, Federico M. Zegers, Alireza Abbaspour, Carl D. Crane, Warren E. Dixon

    A continuous controller is developed for a centralized network control system (NCS) that is composed of agents with nonlinear dynamics subject to a Time-Delay-Switch (TDS) attack and additive disturbances. Since the state tracking error is unmeasurable during TDS attacks, controllers cannot use the state tracking error to coordinate the NCS. Therefore, a novel error signal is designed to address this unique challenge and enable the NCS to achieve a formation control objective. Furthermore, a TDS attack mitigation strategy is developed, which uses both learning and model-based approaches to estimate an agent's state for TDS attack detection and compensation. Lyapunov-Krasovskii (LK) functionals are used in the stability analysis to prove that the tracking errors converge to a steady-state residual, which is a function of the system uncertainty and TDS attack properties. The leader-follower formation control problem for Unmanned Aerial Vehicles (UAVs) based on a pure pursuit guidance law is selected for a simulation study to validate the performance of the proposed method.


  • Open Access

    Investigating culturally contextualized making with the Navajo Nation

    by Daniel Z. Frank, Elliot P. Douglas, Darryl N. Williams, Carl D. Crane

    Background: Recently there has been considerable interest in making as a means to promote interest in engineering careers. Leveraging making practices that already exist in communities could provide a way to address the severe underrepresentation of minority groups, such as Native Americans, in engineering. Before any programs or curricula can be developed to accomplish this goal, it must first be determined how these communities understand the experience of making.Purpose: The aim of this study was to determine the Navajo people's unique understanding of making. It was guided by the following research question: “In what ways do the Navajo describe the experience of making?”Design: Qualitative data were collected in the form of semi‐structured interviews given to participants who identify as being Navajo. Interview transcripts were analyzed using phenomenography.Findings: Five hierarchical categories emerged from the data analysis: survival, communication, pride, self‐actualization, and community. A sixth category, spirituality, also appeared as an overarching category.Conclusions: This study identified the ways in which the participants understand the experience of making. These findings may aid the development of making programs and curricula that are designed to promote engineering education on the Navajo Nation.


  • Open Access

    Dedicated Nonlinear Control of Robot Manipulators in the Presence of External Vibration and Uncertain Payload

    by Mustafa M. Mustafa, Ibrahim Hamarash, Carl D. Crane

    Robot manipulators are often tasked with working in environments with vibrations and are subject to load uncertainty. Providing an accurate tracking control design with implementable torque input for these robots is a complex topic. This paper presents two approaches to solve this problem. The approaches consider joint space tracking control design in the presence of nonlinear uncertain torques caused by external vibration and payload variation. The properties of the uncertain torques are used in both approaches. The first approach is based on the boundedness property, while the second approach considers the differentiability and boundedness together. The controllers derived from each approach differ from the perspectives of accuracy, control effort, and disturbance properties. A Lyapunov-based analysis is utilized to guarantee the stability of the control design in each case. Simulation results validate the approaches and demonstrate the performance of the controllers. The derived controllers show stable results at the cost of the mentioned properties.


  • Open Access

    FEA-Based Determination of Stiffness Matrices for Compliant Mechanisms

    by Max Stein, Michael Griffis, Carl Crane

    This study begins to explore the use of 3-D printed compliant mechanisms for the simultaneous control of position and force of a robotic end-effector using kinestatic control. An important step in realizing this goal is developing a methodology to efficiently determine the stiffness and compliance matrices of the target mechanism. In this study, finite element analysis (FEA) was used to determine the stiffness matrices of a 3-D printed beam element and spring-like compliant mechanism. The FEA-based results for the beam matched analytical results from beam-bending theory and literature. The FEA-based results for the spring-like compliant mechanism were consistent with the dynamics of the mechanism. Physical experiments were performed to further validate the FEA- based results but deficiencies in these experiments prevented a complete analysis. A limited analysis of the collected data suggests that with minor alterations, corrected physical experiments will match the FEA-based results and validate the FEA-based method of determining a general compliant mechanism’s stiffness matrix.

  • Compliant Formation Control of a Multi-Vehicle System

    by Erica Z. MacArthur, Carl D. Crane

    This research identifies a strategy called compliant formation control, which may be used to coordinate the navigational structure of a team of autonomous vehicles. This technique controls the team's motion based on a given, desired formation shape and a given, desired set of neighboring separation distances, wherein the formation shape is considered general two-dimensional. The strategy establishes how to select, place, and use virtual springs and dampers that conceptually "force" proper interspacing between neighboring team members. The objective is to continuously maintain, in the most optimal way, the desired formation as team motion proceeds. In practice, actual robot separation distances will be measured relative to smarter, leader robots that have known position and orientation information at all times (e.g., GPS or INS). The control strategy subsequently commands, in an optimal way, each vehicle by providing a heading and velocity necessary to maintain the desired formation. Such requisite commands result from modeling the compliant displacements of team members as they travel in a network of virtual springs and dampers. The equations used to achieve coordinated motion of the robot team will be discussed and specific case studies will be presented to demonstrate the effectiveness of the compliant formation control strategy.


  • Road Following in an Unstructured Desert Environment Based on the EM(Expectation-Maximization) Algorithm

    by Jaesang Lee, Carl D. Crane

    This paper describes the development and performance of a vision system, named PFSS (path finder smart sensor) for autonomous navigation of an unmanned ground vehicle. A monocular camera and vision processing algorithms were used as the sensor system to identify traversable terrain. Unlike the Bayesian based method which was used by Team CIMAR in the 2005 DARPA Grand Challenge, the expectation-maximization (EM) algorithm is applied. The implementation and performance of this approach are reported here