Zijie Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zijie Qin has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jingbo Wei
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China
6 shared publications - Kun Liu
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China
6 shared publications Kun Liu
3 shared publications- Mingzhi Cao
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China
3 shared publications - Xiaobin Yu
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China
3 shared publications - Xinliang Li
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen, China
3 shared publications
Latest Publications
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 10498-10512
DyGS-SLAM: Dynamic Object Segmentation and Multiview Long-Term Gaussian Consistency for High-Fidelity SLAM
Robust and accurate pose estimation in dynamic environments remains a fundamental challenge for visual simultaneous localization and mapping (SLAM). Recent advances in integrating 3D Gaussian Splatting (3DGS) into SLAM have demonstrated its potential for achieving high-quality scene reconstruction with explicit Gaussian representations. Compared with LiDAR-based systems, monocular and RGB-D cameras are lightweight, inexpensive, and capable of providing rich visual and geometric information, making them highly attractive for practical applications such as human–robot interaction and autonomous driving. However, visual SLAM systems are often sensitive to illumination variations, occlusions, and dynamic objects, which introduce unstable features that may cause pose drift and pseudo-static artifacts, thereby compromising localization stability and map integrity. To address these challenges, this paper presents DyGS-SLAM, a 3DGS-based visual SLAM framework designed for dynamic environments and compatible with both monocular and RGB-D sensors. The proposed system integrates vision-based object detection with depth sensing to perform coarse-to-fine dynamic segmentation, while a temporal-consistency refinement module leverages long-term multi-view observations to suppress residual dynamic artifacts. Extensive experiments on the TUM RGB-D and KITTI datasets show that DyGS-SLAM achieves improved localization accuracy compared with recent dynamic-aware baselines, reducing ATE by 4.7% on TUM and 6.3% on KITTI, while running in real time at 13.8 FPS with 7.4 GB GPU memory on an RTX 4080 Ti. These results highlight the potential of low-cost visual sensors for constructing high-quality 3D maps, enabling practical deployment in a wide range of intelligent sensing and robotic applications.
- 13 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 10498-10512
DyGS-SLAM: Dynamic Object Segmentation and Multiview Long-Term Gaussian Consistency for High-Fidelity SLAM
Robust and accurate pose estimation in dynamic environments remains a fundamental challenge for visual simultaneous localization and mapping (SLAM). Recent advances in integrating 3D Gaussian Splatting (3DGS) into SLAM have demonstrated its potential for achieving high-quality scene reconstruction with explicit Gaussian representations. Compared with LiDAR-based systems, monocular and RGB-D cameras are lightweight, inexpensive, and capable of providing rich visual and geometric information, making them highly attractive for practical applications such as human–robot interaction and autonomous driving. However, visual SLAM systems are often sensitive to illumination variations, occlusions, and dynamic objects, which introduce unstable features that may cause pose drift and pseudo-static artifacts, thereby compromising localization stability and map integrity. To address these challenges, this paper presents DyGS-SLAM, a 3DGS-based visual SLAM framework designed for dynamic environments and compatible with both monocular and RGB-D sensors. The proposed system integrates vision-based object detection with depth sensing to perform coarse-to-fine dynamic segmentation, while a temporal-consistency refinement module leverages long-term multi-view observations to suppress residual dynamic artifacts. Extensive experiments on the TUM RGB-D and KITTI datasets show that DyGS-SLAM achieves improved localization accuracy compared with recent dynamic-aware baselines, reducing ATE by 4.7% on TUM and 6.3% on KITTI, while running in real time at 13.8 FPS with 7.4 GB GPU memory on an RTX 4080 Ti. These results highlight the potential of low-cost visual sensors for constructing high-quality 3D maps, enabling practical deployment in a wide range of intelligent sensing and robotic applications.
- 2 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (6) , 5529-5536
A Quadrotor Aerial Docking System Utilizing Both Vision and Magnetic Field
This paper presents a complete quadrotor aerial docking system that utilizes both vision and magnetic field guidance to achieve high-precision docking. Visual guidance is implemented using a combination of a forward-facing camera and an upward-facing camera, which provide feedback on the local and relative positions, respectively. Magnetic guidance is realized through electromagnets on the quadrotor and permanent magnets at the docking site. The visual system provides guidance for the quadrotor to approach the target point, while the opposing magnetic poles attract and align with each other, cooperating with the quadrotor's four rotors to ensure accurate docking. In the visual guidance system, an intermediate coordinate frame is established to ensure consistent position feedback from the two sets of cameras. Meanwhile, the use of magnetic guidance enables a rapid and low-cost docking solution with greater scalability compared to mechanical docking devices. To coordinate the quadrotor's actuators with the magnetic force from the docking device, a magnetic field model is integrated into the flight controller. The model's parameters are identified offline using a simple, self-made measurement device, which collects data to train a precise model. This model is then used as a virtual sensor to provide real-time feedback. A quadratic programming (QP) problem is then formulated in the control allocation module, allowing the quadrotor's actuators to effectively coordinate with the magnetic field and guide the quadrotor to the docking point. Both simulations and experimental results validate the feasibility of the proposed system.
- 2 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (6) , 5529-5536
A Quadrotor Aerial Docking System Utilizing Both Vision and Magnetic Field
This paper presents a complete quadrotor aerial docking system that utilizes both vision and magnetic field guidance to achieve high-precision docking. Visual guidance is implemented using a combination of a forward-facing camera and an upward-facing camera, which provide feedback on the local and relative positions, respectively. Magnetic guidance is realized through electromagnets on the quadrotor and permanent magnets at the docking site. The visual system provides guidance for the quadrotor to approach the target point, while the opposing magnetic poles attract and align with each other, cooperating with the quadrotor's four rotors to ensure accurate docking. In the visual guidance system, an intermediate coordinate frame is established to ensure consistent position feedback from the two sets of cameras. Meanwhile, the use of magnetic guidance enables a rapid and low-cost docking solution with greater scalability compared to mechanical docking devices. To coordinate the quadrotor's actuators with the magnetic force from the docking device, a magnetic field model is integrated into the flight controller. The model's parameters are identified offline using a simple, self-made measurement device, which collects data to train a precise model. This model is then used as a virtual sensor to provide real-time feedback. A quadratic programming (QP) problem is then formulated in the control allocation module, allowing the quadrotor's actuators to effectively coordinate with the magnetic field and guide the quadrotor to the docking point. Both simulations and experimental results validate the feasibility of the proposed system.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (12) , 11010-11017
Improving the Controller Performance of a Tilt-Rotor Octocopter by Compensating for the Tilt Angle's Dynamics
This paper presents a novel control allocation compensator for a tilt-rotor octocopter using passive hinges, aimed at enhancing attitude control performance by accounting for the dynamic characteristics of the actuators. The introduction of a passive hinging mechanism results in a slower tilt angle response compared to servo-actuated systems, which, if overlooked, can significantly degrade controller performance. In this regard, the paper first models the arm's tilting dynamics and discusses its impact on control allocation errors. A two-part compensator is then introduced to address these dynamics: the first part adds a simple control loop to the control allocation module to quicken the tilt response; the second part re-allocates the thrust based on estimated tilt angles, leveraging the motor's rapid response to offset the slow response of the tilt angle. By simultaneously accelerating the tilt response and reallocating thrusts, the compensator minimizes control allocation error, thereby enhancing the accuracy of position and attitude control. The effectiveness of the proposed method is validated through both simulations and real flight experiments.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (12) , 11010-11017
Improving the Controller Performance of a Tilt-Rotor Octocopter by Compensating for the Tilt Angle's Dynamics
This paper presents a novel control allocation compensator for a tilt-rotor octocopter using passive hinges, aimed at enhancing attitude control performance by accounting for the dynamic characteristics of the actuators. The introduction of a passive hinging mechanism results in a slower tilt angle response compared to servo-actuated systems, which, if overlooked, can significantly degrade controller performance. In this regard, the paper first models the arm's tilting dynamics and discusses its impact on control allocation errors. A two-part compensator is then introduced to address these dynamics: the first part adds a simple control loop to the control allocation module to quicken the tilt response; the second part re-allocates the thrust based on estimated tilt angles, leveraging the motor's rapid response to offset the slow response of the tilt angle. By simultaneously accelerating the tilt response and reallocating thrusts, the compensator minimizes control allocation error, thereby enhancing the accuracy of position and attitude control. The effectiveness of the proposed method is validated through both simulations and real flight experiments.
- Open Access
Hybrid Mode: Routinization of the Transition Mode as the Third Common Mode for Compound VTOL Drones
Fixed-wing Vertical Takeoff and Landing (VTOL) drones have been widely researched and applied because they combine the advantages of both rotorcraft and fixed-wing drones. However, the research on the transition mode of this type of drone has mainly focused on completing the process quickly and stably, and the application potential of this mode has not been given much attention. The objective of this paper is to routinize the transition mode of compound VTOL drones, i.e., this mode works continuously for a longer period of time as a third commonly used mode besides multi-rotor and fixed-wing modes, which is referred to as the hybrid mode. For this purpose, we perform detailed dynamics modeling of the drone in this mode and use saturated PID controllers to control the altitude, velocity, and attitude of the drone. In addition, for more stable altitude control in hybrid mode, we identify the relevant parameters for the lift of the fixed-wings and the thrust of the actuators. Simulation and experimental results show that the designed control method can effectively control the compound VTOL drone in hybrid mode. Moreover, it is proven that flight in hybrid mode can reduce the flight energy consumption to some extent.
Open AccessHybrid Mode: Routinization of the Transition Mode as the Third Common Mode for Compound VTOL Drones
Fixed-wing Vertical Takeoff and Landing (VTOL) drones have been widely researched and applied because they combine the advantages of both rotorcraft and fixed-wing drones. However, the research on the transition mode of this type of drone has mainly focused on completing the process quickly and stably, and the application potential of this mode has not been given much attention. The objective of this paper is to routinize the transition mode of compound VTOL drones, i.e., this mode works continuously for a longer period of time as a third commonly used mode besides multi-rotor and fixed-wing modes, which is referred to as the hybrid mode. For this purpose, we perform detailed dynamics modeling of the drone in this mode and use saturated PID controllers to control the altitude, velocity, and attitude of the drone. In addition, for more stable altitude control in hybrid mode, we identify the relevant parameters for the lift of the fixed-wings and the thrust of the actuators. Simulation and experimental results show that the designed control method can effectively control the compound VTOL drone in hybrid mode. Moreover, it is proven that flight in hybrid mode can reduce the flight energy consumption to some extent.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (1) , 199-206
Design and Flight Control of a Novel Tilt-Rotor Octocopter Using Passive Hinges
This letter presents a novel tilt-rotor octocopter that can generate tiltable thrust without the need for servo-driven mechanisms. The octocopter's eight rotors are divided into pairs and each pair is mounted on an arm, which is connected to the airframe through passive hinges. Each pair is also equipped with a sub-controller that uses the differential thrust of the rotor pair to control the arm's tilting angle. Then, these sub-controllers work together with the main controller installed on the frame body to regulate the attitude and position of the octocopter. This octocopter can be controlled via a remote controller in a manner similar to a classic quadrotor, operating in stabilized or position mode both indoors and outdoors, also capable of executing flight missions following predefined trajectories. Considering that the communication delays between the main controller and sub-controllers would degrade the control performance due to the delayed response of the vectored thrust. We also propose a decentralized control allocation strategy that directly assigns parts of control loops to the sub-controllers so that the communication delays can be bypassed. Finally, we demonstrate the advantages of the new octocopter with the proposed method through simulations and real flight experiments.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (1) , 199-206
Design and Flight Control of a Novel Tilt-Rotor Octocopter Using Passive Hinges
This letter presents a novel tilt-rotor octocopter that can generate tiltable thrust without the need for servo-driven mechanisms. The octocopter's eight rotors are divided into pairs and each pair is mounted on an arm, which is connected to the airframe through passive hinges. Each pair is also equipped with a sub-controller that uses the differential thrust of the rotor pair to control the arm's tilting angle. Then, these sub-controllers work together with the main controller installed on the frame body to regulate the attitude and position of the octocopter. This octocopter can be controlled via a remote controller in a manner similar to a classic quadrotor, operating in stabilized or position mode both indoors and outdoors, also capable of executing flight missions following predefined trajectories. Considering that the communication delays between the main controller and sub-controllers would degrade the control performance due to the delayed response of the vectored thrust. We also propose a decentralized control allocation strategy that directly assigns parts of control loops to the sub-controllers so that the communication delays can be bypassed. Finally, we demonstrate the advantages of the new octocopter with the proposed method through simulations and real flight experiments.
- Open Access
Research on the Distributed Propeller Slipstream Effect of UAV Wing Based on the Actuator Disk Method
Distributed electric propulsion technology has great potential and advantages in the development of drones. In this paper, to study the slipstream effect of distributed propellers, the actuator disk method was used to verify a single propeller, and the calculated thrust was in good agreement with the test results. Then, based on the actuator disk method, the influence of different installation positions on the slipstream effect was studied, and the distributed propeller layout was optimized by a genetic algorithm to improve the low-speed performance of the unmanned aerial vehicle (UAV) during the take-off phase and increase the cruise duration. The analysis results showed that the lift of the wing will be larger when the propellers are higher than the wing. The wing lift and drag of the counter-rotating are less than those of the co-rotating. Compared with the original layout, the lift coefficient of the optimized distributed propeller layout is significantly increased by 30.97%, while the lift/drag ratio is increased by 7.34%. Finally, we designed the test platform and qualitatively verified the calculated results without quantitative verification.
Open AccessResearch on the Distributed Propeller Slipstream Effect of UAV Wing Based on the Actuator Disk Method
Distributed electric propulsion technology has great potential and advantages in the development of drones. In this paper, to study the slipstream effect of distributed propellers, the actuator disk method was used to verify a single propeller, and the calculated thrust was in good agreement with the test results. Then, based on the actuator disk method, the influence of different installation positions on the slipstream effect was studied, and the distributed propeller layout was optimized by a genetic algorithm to improve the low-speed performance of the unmanned aerial vehicle (UAV) during the take-off phase and increase the cruise duration. The analysis results showed that the lift of the wing will be larger when the propellers are higher than the wing. The wing lift and drag of the counter-rotating are less than those of the co-rotating. Compared with the original layout, the lift coefficient of the optimized distributed propeller layout is significantly increased by 30.97%, while the lift/drag ratio is increased by 7.34%. Finally, we designed the test platform and qualitatively verified the calculated results without quantitative verification.
- Open Access
- 31 May 2023
- Published by MDPI AG in Preprints.org
Research on the Distributed Propeller Slipstream Effect of UAV Wing Based on the Actuator Disk Method
Distributed electric propulsion technology has great potential and advantage in the development of drones. In this paper, to study the slipstream effect of distributed propeller, the actuator disk method was used to verify a single propeller, and the calculated thrust was in good agreement with the test results. Then, based on the actuator disk method, the influence of different installation positions on the slipstream effect was studied, and the distributed propeller layout was optimized by genetic algorithm. The analysis results showed that lift of the wing will be larger when the propellers are higher than the wing. When the relative height between the propeller and the wing is zero, the drag is the lowest. The influence of disk diameter on the slipstream is that the larger the diameter is, the higher the lift force and the drag force are. The slipstream effect of the optimized propeller distribution improves the lift-drag ratio of the wing, by 108.5% in the initial lift-drag ratio.
- 31 May 2023
- Published by MDPI AG in Preprints.org
Open AccessResearch on the Distributed Propeller Slipstream Effect of UAV Wing Based on the Actuator Disk Method
Distributed electric propulsion technology has great potential and advantage in the development of drones. In this paper, to study the slipstream effect of distributed propeller, the actuator disk method was used to verify a single propeller, and the calculated thrust was in good agreement with the test results. Then, based on the actuator disk method, the influence of different installation positions on the slipstream effect was studied, and the distributed propeller layout was optimized by genetic algorithm. The analysis results showed that lift of the wing will be larger when the propellers are higher than the wing. When the relative height between the propeller and the wing is zero, the drag is the lowest. The influence of disk diameter on the slipstream is that the larger the diameter is, the higher the lift force and the drag force are. The slipstream effect of the optimized propeller distribution improves the lift-drag ratio of the wing, by 108.5% in the initial lift-drag ratio.
- 31 January 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 237 (10) , 2312-2330
Cascade-modified uncertainty and disturbance estimator–based control of quadrotors for accurate attitude tracking under exogenous disturbance
This paper presents a cascade-modified uncertainty and disturbance estimator (CMUDE)–based controller. The attitude-tracking performance of a quadrotor would be greatly degraded due to two factors: (1) a nonideal actuator and (2) an exogenous disturbance. Based on these factors, an actuator model is accurately identified using a thrust test platform. Then, a cascade-structured CMUDE controller is designed through the backstepping method, so the disturbances from different channels can be separately dealt with. The idea of the uncertainty and disturbance estimator (UDE) is then applied to dynamically compensate for not only the exogenous disturbance but also the time delay in the actuator dynamics. Benefitting from that, the problem of mismatched disturbances is solved by defining virtual control inputs; furthermore, the nonlinear term in the attitude kinematics is included in the model uncertainty to be canceled instead of being ignored. When tracking attitude commands, the exogenous disturbance and model uncertainty along with the time delay of the actuator are estimated and compensated for by the proposed controller, so the performance of the disturbance rejection is significantly improved while maintaining a quick response to the rapidly changing commands. To verify that, the proposed controller is implemented on a quadrotor platform to carry out exhaustive experiments and compared with the mainstream cascade PID (CPID) controller, the classic UDE-based controller, and the latest modified-UDE (MUDE)–based controller. The results show that our control strategy achieves a better disturbance rejection and more accurate tracking performance than other controllers.
- 31 January 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 237 (10) , 2312-2330
Cascade-modified uncertainty and disturbance estimator–based control of quadrotors for accurate attitude tracking under exogenous disturbance
This paper presents a cascade-modified uncertainty and disturbance estimator (CMUDE)–based controller. The attitude-tracking performance of a quadrotor would be greatly degraded due to two factors: (1) a nonideal actuator and (2) an exogenous disturbance. Based on these factors, an actuator model is accurately identified using a thrust test platform. Then, a cascade-structured CMUDE controller is designed through the backstepping method, so the disturbances from different channels can be separately dealt with. The idea of the uncertainty and disturbance estimator (UDE) is then applied to dynamically compensate for not only the exogenous disturbance but also the time delay in the actuator dynamics. Benefitting from that, the problem of mismatched disturbances is solved by defining virtual control inputs; furthermore, the nonlinear term in the attitude kinematics is included in the model uncertainty to be canceled instead of being ignored. When tracking attitude commands, the exogenous disturbance and model uncertainty along with the time delay of the actuator are estimated and compensated for by the proposed controller, so the performance of the disturbance rejection is significantly improved while maintaining a quick response to the rapidly changing commands. To verify that, the proposed controller is implemented on a quadrotor platform to carry out exhaustive experiments and compared with the mainstream cascade PID (CPID) controller, the classic UDE-based controller, and the latest modified-UDE (MUDE)–based controller. The results show that our control strategy achieves a better disturbance rejection and more accurate tracking performance than other controllers.
- Open Access
- 29 January 2023
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (7) , 925-942
A smooth control allocation method for a distributed electric propulsion VTOL aircraft test platform
Distributed electronic propulsion (DEP) aircraft with vertical take‐off and landing (VTOL) ability mostly equipped with multiple redundant tiltable propulsors, which are used to provide not only thrusts, but also control torque in all flight mode. The features make the control allocation problem of these aircraft both complex and important. Therefore, this paper proposes: (і) a prototype platform for DEP VTOL aircraft that allows researchers to design and analyse control allocation strategies, and (іі) a uniform hierarchical control allocation method that can be adapted to both MC and FW modes. The platform contains ten fully actuated thrusters, which are distributed in the scaled geometry of a typical DEP‐VTOL aircraft. The proposed control allocation strategy uses hierarchical structure to avoid high‐dimensional matrix operations for the redundant actuators. The additional constraints on the thrust and tilt angles of the actuators are addressed by adopting cascade generalized inversion (CGI) to force decompensation (FD)‐based methods by a coordinate transformation. A novel smooth strategy through Schur Complement is also presented to achieve steady and smooth transition from MC to FW mode. Finally, the proposed method is implemented in the authors’ novel platform in both simulations and flight experiments to demonstrate its effectiveness and smoothness.
- 29 January 2023
- Published by Institution of Engineering and Technology (IET) in IET Control Theory & Applications
- Vol. 17 (7) , 925-942
Open AccessA smooth control allocation method for a distributed electric propulsion VTOL aircraft test platform
Distributed electronic propulsion (DEP) aircraft with vertical take‐off and landing (VTOL) ability mostly equipped with multiple redundant tiltable propulsors, which are used to provide not only thrusts, but also control torque in all flight mode. The features make the control allocation problem of these aircraft both complex and important. Therefore, this paper proposes: (і) a prototype platform for DEP VTOL aircraft that allows researchers to design and analyse control allocation strategies, and (іі) a uniform hierarchical control allocation method that can be adapted to both MC and FW modes. The platform contains ten fully actuated thrusters, which are distributed in the scaled geometry of a typical DEP‐VTOL aircraft. The proposed control allocation strategy uses hierarchical structure to avoid high‐dimensional matrix operations for the redundant actuators. The additional constraints on the thrust and tilt angles of the actuators are addressed by adopting cascade generalized inversion (CGI) to force decompensation (FD)‐based methods by a coordinate transformation. A novel smooth strategy through Schur Complement is also presented to achieve steady and smooth transition from MC to FW mode. Finally, the proposed method is implemented in the authors’ novel platform in both simulations and flight experiments to demonstrate its effectiveness and smoothness.