TZTianxiang Zhao

Tianxiang Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tianxiang Zhao has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study of the Microstructure and Properties of CoCrFeNiMnx High-Entropy Alloys

    by Zhengpeng Zhang, Shichen Yan, Jiankang Huang, Tianxiang Zhao, Chen Dong, Abdul Bari, Jiaojiao Xie, Xiaoquan Yu, Yingwei Chen

    High-entropy alloys (HEAs) provide a broad compositional space for tuning phase stability and surface durability. CoCrFeNiMnx (x = 0.5, 1.0, 1.5, and 2.0) alloys were fabricated by vacuum arc melting and characterized by X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS), microhardness testing, electrochemical testing in 3.5 wt.% NaCl, and X-ray photoelectron spectroscopy (XPS). Density functional theory (DFT) calculations and first-principles molecular dynamics were further employed to analyze the Mn-dependent electronic structure and oxygen–metal bonding. The XRD results indicate a transition from a single FCC solid solution at x ≤ 1.0 to an FCC + BCC constitution at x ≥ 1.5. With increasing Mn, microstructures evolve from coarse dendrites toward higher fractions of equiaxed grains. Hardness decreases from 163.6 HV (x = 0.5) to 125.1 HV (x = 1.0) and then increases to 162.6 HV (x = 2.0), indicating competing solid-solution and phase/segregation effects. Electrochemical measurements show enhanced corrosion resistance with Mn addition; the x = 2.0 alloy exhibits the lowest fitted corrosion current density (icorr = 0.3482 × 10−6 μA·cm−2) and the most stable passivation response. XPS reveals passive films dominated by Fe2O3 together with Mn3+ oxides, whose synergistic formation promotes a denser barrier layer. DFT predicts a monotonic decrease in Fermi level and a narrowed conduction band range as Mn increases, consistent with reduced electron transfer activity during anodic dissolution. Interfacial simulations show that O preferentially bonds with Cr and Mn, while Ni–O bonds have the lowest estimated rupture barrier, rationalizing a tendency toward localized corrosion at Ni-associated sites.


  • Open Access

    Effect of Phase Structure on the Properties of Additively Manufactured NiTi Alloy Based on Molecular Dynamics Simulation

    by Tianxiang Zhao, Jiankang Huang, Huayu Zhao, Rui Xiang, Xueping Song, Ding Fan

    NiTi alloy has been widely used due to its excellent shape memory effect, superelasticity, and high damping performance. These excellent properties are mainly derived from its unique phase structure. In order to further explore the effect of different phase ratios on the performance of NiTi alloy, this study successfully prepared NiTi alloys with different atomic ratios by controlling the wire feeding speed to control the atomic ratio in the alloy. The results of TEM showed that the alloy with a lower Ni atomic ratio is enriched with Ti element, while the alloy with a higher Ni atomic ratio has a coexistence of NiTi phase and NiTi2 phase. At the same time, the compression performance showed that the increase in Ni atomic ratio can improve the compression performance of the alloy. In addition, by constructing a molecular dynamics model of NiTi alloys with different phase ratios, the unloading recovery behavior and phase transformation characteristics of the alloy under external force were analyzed. The results showed that with the increase of the NiTi2 phase ratio in the alloy, the irrecoverable strain also increases, exceeding the elastic strain limit of the NiTi2 phase, resulting in the generation of disordered structure and plastic deformation in the late deformation stage. In addition, with the increase of the NiTi2 phase ratio, the energy dissipation area of the hysteresis curve increases, reflecting a greater energy loss.


  • Open Access

    The Al-Fe Intermetallic Compounds and the Atomic Diffusion Behavior at the Interface of Aluminum-Steel Welded Joint

    by Yinglong Zhang, Tianxiang Zhao, Xiaoquan Yu, Jiankang Huang

    The formation of intermetallic compounds (IMC) at the Al/Fe interface determined the mechanical property of steel-aluminum welded joint. To understand the interfacial microstructure evolution and relate diffusion mechanism of atoms cross the Al/Fe interface, the effect of welding parameters on the interfacial IMC was studied, and the molecular dynamics method (MD) was used to simulate the diffusion process of Al and Fe atoms. Four temperatures (950 K, 1000 K, 1050 K, and 1100 K) were selected in the simulation model. The interfacial IMC are distributed in a laminar pattern, and their physical phases are mainly composed of Fe2Al5, controlling the Al/Fe atomic ratio of 5:2 in the IMC configuration, the Embedded Atom Method (EAM) potential is used to describe the interactions between Al and Fe atoms. In the Al-Fe system IMC conformation, the mean square displacement and diffusion (MSD) coefficient of Al atoms at different temperatures were small, and the main diffusion path is the Al atoms across the IMC conformation into the Fe crystal structure. The diffusion in the IMC conformation was mainly along the direction perpendicular to the interface. The diffusion mechanisms were mainly vacancy diffusion and interstitial diffusion mechanisms.