Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xuefeng Song has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design of Key Components and Field Performance Evaluation of the Model 2BJD-4 Precision Corn Planter

    by Yanchun Kang, Xuefeng Song, Fei Dai, Feng Xiao, Taijin Huang, Zekang Deng, Xingkai Li

    To address low seeding accuracy and poor seed-fertilization coordination caused by wheel slip and vibration in undulating terrains, a model 2BJD-4 precision corn planter featuring an independent electric-drive transmission was developed. The planter integrates furrow opening, fertilization, single-seed precision metering, soil covering, and compaction into a coordinated one-pass operation. Key mechanical assemblies include a servo-motor-driven finger-clamp seed meter, a parallel four-bar terrain-following mechanism, and an external fluted-roller fertilization meter. To capture complex non-linear soil-tool interactions, a predictive surrogate model was established using Support Vector Regression (SVR) and coupled with the Dung Beetle Optimizer (DBO) for global parameter optimization. Comprehensive field trials validated that the SVR-DBO framework outperformed traditional Response Surface Methodology, securing an optimal qualified spacing index of 92.8% and a planting depth qualification rate of 93.0% under experimental conditions. These findings demonstrate the technical feasibility of the proposed design in maintaining seed spacing and depth uniformity under tested topographies, offering a practical reference for the development of precision planters in hilly and plain regions.

  • Enhancing DEM Prediction of Maize Kernel Breakage: A Polyhedral Particle Based Calibration Framework

    by Xuefeng Song, Haipeng Lin, Fei Dai, Fengwei Zhang

    As a major global food crop, maize kernel hardness significantly influences breakage during harvesting and post‐production processing. However, accurately predicting the breakage behavior of maize kernels remains challenging due to multiple influencing factors, such as kernel shape, moisture content, and variety. Based on the Tavares breakage theory within the discrete element method (DEM), this work combined experimental and simulation approaches to calibrate the parameters of a maize kernel breakage model. A polyhedral discrete element model of maize kernels was established, and the particle size distribution data of fragments were obtained through uniaxial compression experiment. By fitting the governing equations of the Tavares breakage model to experimental data, calibrated model parameters were determined as follows: E ∞ , d 0 , φ , A , and were 181.3, 8.22, 10, 67.7, and 0.033, respectively. Finally, the internal consistency of the calibrated parameters was validated by comparing re‐simulation and experimental results across several metrics: cumulative fragment size distribution, mass‐based proportion of fragments on each screen, force–displacement curves, and critical fracture force. The results showed that when the particle size distribution follows the incomplete beta function (IBF) law, the simulation results agree well with experimental values. Furthermore, this work demonstrated that the calibration parameters of the maize breakage model were reliable and could accurately predict and analyze the maize crushing process.

  • Open Access

    CFD-DEM simulation and parameter optimization of pneumatic conveying of threshed corn residual products in a vertical elbow

    by Yanchun Kang, Xuefeng Song, Ruichi Luo, Taijin Huang, Feng Xiao, Zekang Deng, Huhu Chen


  • Open Access

    Correction: Lin et al. Research on Machine Learning Models for Maize Hardness Prediction Based on Indentation Test. Agriculture 2024, 14, 224

    by Haipeng Lin, Xuefeng Song, Fei Dai, Fengwei Zhang, Qiang Xie, Huhu Chen

  • Open Access

    Study on the Contact Parameter Calibration of the Maize Kernel Polyhedral Discrete Element Model

    by Huhu Chen, Haipeng Lin, Xuefeng Song, Fengwei Zhang, Fei Dai, Ting Yang, Baicheng Li

    During maize production and transportation, maize kernels frequently interact with mechanical components. To accurately simulate the interaction process between maize and mechanical components, it is essential to establish a reliable maize kernel model and input precise contact parameters. This study established polyhedral discrete element models of different maize kernels and calibrated the contact parameters between maize kernels and steel plates using the inclined plane method. The coefficients of restitution, static friction, and dynamic friction between maize and steel sheets were measured to be 0.5, 0.545, and 0.213, respectively. Subsequently, the contact parameters between maize kernels were determined through steepest climb tests and central composite design response surface tests. Then, the above parameters were optimized using Design-Expert software. The coefficients of restitution, static friction, and dynamic friction between maize kernels were measured to be 0.318, 0.182, and 0.232, respectively. Finally, the optimized parameters were validated using the angle of repose experiment, which found that the relative error between the experiment and the simulation was only 1.24%. The results indicated that the obtained contact parameters were accurate and reliable.


  • Open Access

    Research on Machine Learning Models for Maize Hardness Prediction Based on Indentation Test

    by Haipeng Lin, Xuefeng Song, Fei Dai, Fengwei Zhang, Qiang Xie, Huhu Chen

    Hardness is a critical mechanical property of grains. Accurate predictions of grain hardness play a crucial role in improving grain milling efficiency, reducing grain breakage during transportation, and selecting high-quality crops. In this study, we developed machine learning models (MLMs) to predict the hardness of Jinsui No.4 maize seeds. The input variables of the MLM were loading speed, loading depth, and different types of indenters, and the output variable was the slope of the linear segment. Using the Latin square design, 100 datasets were generated. Four different types of MLMs, a genetic algorithm (GA), support vector machine (SVM), random forest (RF), and long short-term memory network (LSTM), were used for our data analysis, respectively. The result indicated that the GA model had a high accuracy in predicting hardness values, the R2 of the GA model training set and testing set reached 0.98402 and 0.92761, respectively, while the RMSEs were 1.4308 and 2.8441, respectively. The difference between the predicted values and the actual values obtained by the model is relatively small. Furthermore, in order to investigate the relationship between hardness and morphology after compression, scanning electron microscopy was used to observe the morphology of the maize grains. The result showed that the more complex the shape of the indenter, the more obvious the destruction to the internal polysaccharides and starch in the grain, and the number of surface cracks also significantly increases. The results of this study emphasize the potential of MLMs in determining the hardness of agricultural cereal grains, leading to improved industrial processing efficiency and cost savings. Additionally, combining grain hardness prediction models with the operating mechanisms of industry machinery would provide valuable references and a basis for the parameterization of seed grain processing machinery.


  • Open Access

    Green Development of Natural Fibre-Based Paper Mulch from Recyclable Cow Dung and Flax Straw Waste

    by Xiaoqing Cao, Lu Li, Fengwei Zhang, Fangyuan Zhang, Xuefeng Song, Wuyun Zhao, Fei Dai

    Livestock dung, discarded crop straws, and residual plastic film are the primary agricultural non-point sources of pollution. For livestock dung and discarded crop straw, the general treatment focuses on compost, animal fodder, industrial raw material, and new energy. The development of degradable mulch film is the main way to solve pollution from residual plastic film. However, an effective way to solve the above three types of pollution simultaneously and use them for ecological circular agriculture has been less studied. In this study, using cow dung and flax straw wastes as raw materials, we prepared natural, fibre-based paper mulch using the rapid-Kothen method and analysed the film-forming mechanism. Based on the Van Soest method, the cow dung and flax straw waste contain abundant cellulose fibres: 36.75% and 54.69%, respectively. The tensile strength and tear strength of fibre paper mulch are 1.87 kN/m and 19.91 N/mm, respectively. To enhance the adaptability of the fibre paper mulch in humid environments, the surface of the mulch was treated with alkyl ketene dimer (AKD). The AKD-coated fibre paper mulch displays hydrophobic properties, indicated by a contact angle of 128° ± 2°. It has a wet tensile strength of 0.64 kN/m and a wet tear strength of 8.23 N/mm. Additionally, it exhibits a dry tensile strength and a tear strength of 2.13 kN/m and 16.43 N/mm, respectively. Notably, the dry tensile strength is increased by 16.31%. In this way, the livestock dung and discarded crop straw can be reused, reducing dung pollution and straw burning in livestock farms, and the final products can alleviate the residual film pollution simultaneously.


  • Open Access

    Optimization of the Green Fibre Paper Film Preparation Process Based on Box–Behnken Response Surface Methodology

    by Xiaoqing Cao, Lu Li, Fengwei Zhang, Linxiong Shi, Fangyuan Zhang, Xuefeng Song, Wuyun Zhao, Fei Dai

    To improve the utilization rate of flax straw and the clean treatment of livestock manure, an experimental study was conducted on the process and performance of making fibre paper films by mixing cow dung and flax straw fibre. Cow dung and flax straw were used as the main raw materials, and functional additives were not added. The whole technological process of the pretreatment, the beating process, the determination of the beating degree, the basis weight of the paper, papermaking, drying, sample cutting, and the determination and analysis of the related mechanical properties of the film-making materials were studied. In this study, the Box–Behnken experimental design principle in the response surface methodology was adopted, and the effect of each factor on the tensile strength and tear strength of fibre paper film made of mixed fibres was determined using the combined experimental design comprising four factors and three levels centres. The results showed that the optimum technological parameters were as follows: the beating degree of the cow dung fibre was 37 °SR, the beating degree of the flax straw fibre was 85 °SR, the paper basis weight was 80 g/m2, and the addition of flax straw fibre was 65%. At a drying temperature of 80 °C and a drying time of 8 min, under the conditions of the hybrid fibre paper film placed in the laboratory environment (humidity of 30%~40%, temperature of 18 °C) for 24 h, the measured tensile strength was about 8.26 MPa, and the tear strength was about 19.91 N/mm. This study provides a reference that can be used for the further study of fibre paper film.