Xiangping Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiangping Jiang has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
Chao Chen
Jiangxi Key Laboratory of Advanced Ceramic Materials, Department of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen, China
25 shared publicationsNa Tu
Jiangxi Key Laboratory of Advanced Ceramic Materials, Department of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen 333403, Jiangxi, P. R. China
19 shared publicationsXin Nie
Jiangxi Key Laboratory of Advanced Ceramic Materials, Department of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen, China
16 shared publications- Xiaokun Huang
School of Materials Science and Engineering, Jingdezhen Ceramic University 3 , Jingdezhen 333403
13 shared publications - Chao Chen
Jiangxi Key Laboratory of Advanced Ceramic Materials, School of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen, China
12 shared publications Xiaokun Huang
Department of Material Science and Engineering, Jingdezhen Ceramic University, Jingdezhen, China
12 shared publications
Latest Publications
- Open Access
- 7 August 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Dielectrics
Synergistic enhancement of breakdown strength through interfacial polarization suppression and dielectric constant reduction in BNT-based energy storage ceramics
Dielectric ceramic capacitors (DCCs) are widely used in electronic components due to their rapid charge-discharge capability and high power density. The breakdown strength [Formula: see text] is a key factor determining the energy-storage density of DCCs. Understanding the contributions and synergistic effects of the various mechanisms responsible for enhancing [Formula: see text] is important for the development of high-performance energy-storage DCCs. In this work, La is introduced at the A-site of Bi[Formula: see text]Na[Formula: see text]TiO 3 -based (BNT) ceramics with a composition of x, substituting for Bi. Consequently, [Formula: see text] increases from 127[Formula: see text]kV/cm ([Formula: see text]) to 320[Formula: see text]kV/cm ([Formula: see text] 0.11), achieving a sizable recoverable energy density of 4.83 J/cm 3 . We systematically analyze the structures at multiple scales and various electrical properties, evaluating possible factors affecting [Formula: see text]. The results reveal that the enhancement of [Formula: see text] mainly originates from interfacial polarization suppression and dielectric constant reduction. At low doping levels, dielectric constant reduction dominates the enhancement of [Formula: see text], whereas at higher doping levels ([Formula: see text]), interfacial polarization suppression becomes significant. For the optimal sample ([Formula: see text]), the enhancement in [Formula: see text] exceeds the additive contributions of the two individual mechanisms, indicating a synergistic effect. This work may offer useful insights for the rational design and optimization of high-performance energy-storage DCCs.
- 7 August 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Dielectrics
Open AccessSynergistic enhancement of breakdown strength through interfacial polarization suppression and dielectric constant reduction in BNT-based energy storage ceramics
Dielectric ceramic capacitors (DCCs) are widely used in electronic components due to their rapid charge-discharge capability and high power density. The breakdown strength [Formula: see text] is a key factor determining the energy-storage density of DCCs. Understanding the contributions and synergistic effects of the various mechanisms responsible for enhancing [Formula: see text] is important for the development of high-performance energy-storage DCCs. In this work, La is introduced at the A-site of Bi[Formula: see text]Na[Formula: see text]TiO 3 -based (BNT) ceramics with a composition of x, substituting for Bi. Consequently, [Formula: see text] increases from 127[Formula: see text]kV/cm ([Formula: see text]) to 320[Formula: see text]kV/cm ([Formula: see text] 0.11), achieving a sizable recoverable energy density of 4.83 J/cm 3 . We systematically analyze the structures at multiple scales and various electrical properties, evaluating possible factors affecting [Formula: see text]. The results reveal that the enhancement of [Formula: see text] mainly originates from interfacial polarization suppression and dielectric constant reduction. At low doping levels, dielectric constant reduction dominates the enhancement of [Formula: see text], whereas at higher doping levels ([Formula: see text]), interfacial polarization suppression becomes significant. For the optimal sample ([Formula: see text]), the enhancement in [Formula: see text] exceeds the additive contributions of the two individual mechanisms, indicating a synergistic effect. This work may offer useful insights for the rational design and optimization of high-performance energy-storage DCCs.
- 2 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (1)
Significantly improved Curie temperature in van der Waals Fe3GaTe2 by Li-ion intercalation
Magnetic van der Waals (vdW) layered materials have emerged as a research hotspot in condensed matter physics over the past decade. These materials not only exhibit rich physical properties but also provide promising candidates for next-generation magnetic functional devices. For practical applications, the Curie temperature (TC) is a critical performance metric, as it determines the upper limit of the device operating temperature. To date, only a limited number of vdW magnets have been experimentally reported to possess TC above room temperature. Among them, Fe3GaTe2 (FGaT) stands out with a TC of up to 350 K. A substantial enhancement of its TC via compositional modification would not only broaden the working temperature window but also improve functional stability under ambient conditions. Here, density functional theory calculations are employed to construct a Li-intercalated FGaT lattice model, denoted as Li-FGaT, and to study the magnetism enhancement induced by Li-ion intercalation. Our results predict a significantly improved TC of 770 K for Li-FGaT. It is revealed that the electron doping introduced by Li-ion intercalation not only provides interfacial spin-polarized mediating carriers to strengthen the interlayer ferromagnetic coupling but also induces intralayer electron redistribution to enhance the spin exchanges, leading to elevated TC. Thus, this work provides a testable target for experiments and offers useful insights into the development of high-TC vdW magnets.
- 2 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (1)
Significantly improved Curie temperature in van der Waals Fe3GaTe2 by Li-ion intercalation
Magnetic van der Waals (vdW) layered materials have emerged as a research hotspot in condensed matter physics over the past decade. These materials not only exhibit rich physical properties but also provide promising candidates for next-generation magnetic functional devices. For practical applications, the Curie temperature (TC) is a critical performance metric, as it determines the upper limit of the device operating temperature. To date, only a limited number of vdW magnets have been experimentally reported to possess TC above room temperature. Among them, Fe3GaTe2 (FGaT) stands out with a TC of up to 350 K. A substantial enhancement of its TC via compositional modification would not only broaden the working temperature window but also improve functional stability under ambient conditions. Here, density functional theory calculations are employed to construct a Li-intercalated FGaT lattice model, denoted as Li-FGaT, and to study the magnetism enhancement induced by Li-ion intercalation. Our results predict a significantly improved TC of 770 K for Li-FGaT. It is revealed that the electron doping introduced by Li-ion intercalation not only provides interfacial spin-polarized mediating carriers to strengthen the interlayer ferromagnetic coupling but also induces intralayer electron redistribution to enhance the spin exchanges, leading to elevated TC. Thus, this work provides a testable target for experiments and offers useful insights into the development of high-TC vdW magnets.
- 24 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (1) , 51
Near-zero energy loss and high dielectric temperature stability in a lead-free high-entropy perovskite ceramic
- 24 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (1) , 51
Near-zero energy loss and high dielectric temperature stability in a lead-free high-entropy perovskite ceramic
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (35) , 29368-29378
Critical role of interfacial polarization suppression in enhancing breakdown strength and energy storage performance of NBT-based dielectric ceramics
In this study on (1 − x )Na 0.5 Bi 0.5 TiO 3 - x Ca 0.7 Nd 0.2 TiO 3 ceramics, we find that the interfacial polarization suppression strategy can effectively enhance breakdown strength and energy storage performance despite notably reduced insulation.
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (35) , 29368-29378
Critical role of interfacial polarization suppression in enhancing breakdown strength and energy storage performance of NBT-based dielectric ceramics
In this study on (1 − x )Na 0.5 Bi 0.5 TiO 3 - x Ca 0.7 Nd 0.2 TiO 3 ceramics, we find that the interfacial polarization suppression strategy can effectively enhance breakdown strength and energy storage performance despite notably reduced insulation.
- 26 June 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (18) , 1-11
The effect of CuO on the structure and electrical properties of Na0.5Bi2.5Nb2O9 piezoelectric ceramics
- 26 June 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (18) , 1-11
The effect of CuO on the structure and electrical properties of Na0.5Bi2.5Nb2O9 piezoelectric ceramics
- 11 March 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (8) , 1-9
Semiconducting and mechanism of Sb2O3/Y2O3-doped zirconia
- 11 March 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (8) , 1-9
Semiconducting and mechanism of Sb2O3/Y2O3-doped zirconia
- 29 January 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (3) , 1-9
Impact of K+/Bi3+ co-doping on microstructure and electrical properties of CaBi2Nb2O9 piezoelectric ceramics
- 29 January 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (3) , 1-9
Impact of K+/Bi3+ co-doping on microstructure and electrical properties of CaBi2Nb2O9 piezoelectric ceramics
- 31 December 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (8) , 3804-3814
Enhanced energy storage performances under low electric fields in (1 − x ) Na 0.5 Bi 0.5 TiO 3 – x Sr 0.7 Bi 0.2 (Al 0.5 Ta 0.5 )O 3 relaxor ferroelectric ceramics: impact of Sr 0.7 Bi 0.2 (Al 0.5 Ta 0.5 )O 3 on structure and electrical properties
The introduction of Sr 0.7 Bi 0.2 (Al 0.5 Ta 0.5 )O 3 into Na 0.5 Bi 0.5 TiO 3 induces the coexistence of R 3 c and P 4 bm phases and disrupts ferroelectric domains, thereby optimizing the P – E loops with relaxor behavior and enhancing the energy storage performances.
- 31 December 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (8) , 3804-3814
Enhanced energy storage performances under low electric fields in (1 − x ) Na 0.5 Bi 0.5 TiO 3 – x Sr 0.7 Bi 0.2 (Al 0.5 Ta 0.5 )O 3 relaxor ferroelectric ceramics: impact of Sr 0.7 Bi 0.2 (Al 0.5 Ta 0.5 )O 3 on structure and electrical properties
The introduction of Sr 0.7 Bi 0.2 (Al 0.5 Ta 0.5 )O 3 into Na 0.5 Bi 0.5 TiO 3 induces the coexistence of R 3 c and P 4 bm phases and disrupts ferroelectric domains, thereby optimizing the P – E loops with relaxor behavior and enhancing the energy storage performances.
- 14 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (44) , 30420-30428
The composition/field-induced octahedral tilt, domain switching and improved piezoelectric properties of BF-BT ceramics during phase transition
To clarify the structural mechanism underlying the high piezoelectric activity of (1 − x)BiFeO3-xBaTiO3 ((1 − x)BF-xBT) solid solutions, the evolution of phase structure and domain configuration and their effects on piezoelectric properties were studied in a wide range of components (0.2 ≤ x ≤ 0.9). XRD refinement results show that with the introduction of BT, the phase structure gradually transforms from rhombohedral (R) to rhombohedral/pseudocubic (R/pC) coexistence and finally to pC, accompanied by the weakening of lattice distortion. The freezing temperature (Tf) of (1 − x)BF-xBT decreases with the increment of BT around the morphotropic phase boundary (MPB) (0.3 ≤ x ≤ 0.5). This indicates that the domain structure changes from ferroelectric ordered domains to nanodomains (or polar nanoregions), corresponding to the enhancement of the relaxation state. The high piezoelectric properties of 0.7BF-0.3BT are attributed to the unique heterogeneous domain structure and superior domain switching at the MPB. A large strain is achieved in 0.6BF-0.4BT, which results from the mutual transformation between relaxor nanodomains and ferroelectric ordered domains under electric field.
- 14 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (44) , 30420-30428
The composition/field-induced octahedral tilt, domain switching and improved piezoelectric properties of BF-BT ceramics during phase transition
To clarify the structural mechanism underlying the high piezoelectric activity of (1 − x)BiFeO3-xBaTiO3 ((1 − x)BF-xBT) solid solutions, the evolution of phase structure and domain configuration and their effects on piezoelectric properties were studied in a wide range of components (0.2 ≤ x ≤ 0.9). XRD refinement results show that with the introduction of BT, the phase structure gradually transforms from rhombohedral (R) to rhombohedral/pseudocubic (R/pC) coexistence and finally to pC, accompanied by the weakening of lattice distortion. The freezing temperature (Tf) of (1 − x)BF-xBT decreases with the increment of BT around the morphotropic phase boundary (MPB) (0.3 ≤ x ≤ 0.5). This indicates that the domain structure changes from ferroelectric ordered domains to nanodomains (or polar nanoregions), corresponding to the enhancement of the relaxation state. The high piezoelectric properties of 0.7BF-0.3BT are attributed to the unique heterogeneous domain structure and superior domain switching at the MPB. A large strain is achieved in 0.6BF-0.4BT, which results from the mutual transformation between relaxor nanodomains and ferroelectric ordered domains under electric field.
- Open Access
- 27 August 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (8)
Interfacial engineering of orbital orientation for perpendicular magnetic anisotropy in Co-implanted CrI3 monolayer
Two-dimensional (2D) van der Waals (vdW) magnets are believed to be promising candidates for next-generation information storage, which requires both high Curie points (TC) and large perpendicular magnetic anisotropy (PMA). As one of the most well-known 2D magnets, CrI3 has large PMA but a relatively low TC. Recent theoretical works proposed that implanting metal atoms into the hollow sites of CrI3 could greatly boost TC. However, this process may have the unintended consequence of reducing the PMA and introducing in-plane magnetic anisotropy (IMA) instead. It is, therefore, highly required to implement an additional technique to enhance the PMA. In this work, we use the first-principles method to study the underlying mechanisms of the suppressed PMA (and induced IMA) in the Co-implanted CrI3 monolayer [denoted as Co-(CrI3)2] as an example. It is found that the Co-implantation-induced itinerant electrons cause the transition from PMA to IMA by tuning the orbital orientation of the states around the Fermi level, noting that an in-plane (or out-of-plane) electronic orbital leads to the out-of-plane (or in-plane) momentum that favors PMA (or IMA) due to the spin–orbit coupling. In order to restore the PMA, we predict that using the vdW substrate PtTe2 to construct a heterostructure with the Co-(CrI3)2 monolayer not only reduces the contributions of the interfacial out-of-plane orbitals but also generates additional intralayer in-plane orbitals, both supporting the PMA. Thus, this work provides alternative perspectives on enhancing PMA by interfacial engineering of orbital orientation, paving the way for the development of 2D strong magnets.
- 27 August 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (8)
Open AccessInterfacial engineering of orbital orientation for perpendicular magnetic anisotropy in Co-implanted CrI3 monolayer
Two-dimensional (2D) van der Waals (vdW) magnets are believed to be promising candidates for next-generation information storage, which requires both high Curie points (TC) and large perpendicular magnetic anisotropy (PMA). As one of the most well-known 2D magnets, CrI3 has large PMA but a relatively low TC. Recent theoretical works proposed that implanting metal atoms into the hollow sites of CrI3 could greatly boost TC. However, this process may have the unintended consequence of reducing the PMA and introducing in-plane magnetic anisotropy (IMA) instead. It is, therefore, highly required to implement an additional technique to enhance the PMA. In this work, we use the first-principles method to study the underlying mechanisms of the suppressed PMA (and induced IMA) in the Co-implanted CrI3 monolayer [denoted as Co-(CrI3)2] as an example. It is found that the Co-implantation-induced itinerant electrons cause the transition from PMA to IMA by tuning the orbital orientation of the states around the Fermi level, noting that an in-plane (or out-of-plane) electronic orbital leads to the out-of-plane (or in-plane) momentum that favors PMA (or IMA) due to the spin–orbit coupling. In order to restore the PMA, we predict that using the vdW substrate PtTe2 to construct a heterostructure with the Co-(CrI3)2 monolayer not only reduces the contributions of the interfacial out-of-plane orbitals but also generates additional intralayer in-plane orbitals, both supporting the PMA. Thus, this work provides alternative perspectives on enhancing PMA by interfacial engineering of orbital orientation, paving the way for the development of 2D strong magnets.