Mervin Seiberlich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mervin Seiberlich has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Gerardo Hernandez-Sosa
Institute for Automation and Applied Informatics Karlsruhe Institute of Technology Eggenstein‐Leopoldshafen Germany
5 shared publications - Kai Xia
Light Technology Institute Karlsruhe Institute of Technology Engesserstr. 13 76131 Karlsruhe Germany
3 shared publications - Aleksandr Perevedentsev
Light Technology Institute Karlsruhe Institute of Technology (KIT) Karlsruhe Germany
2 shared publications Luis Arturo Ruiz‐Preciado
Light Technology Institute Karlsruhe Institute of Technology Engesserstr. 13 76131 Karlsruhe Germany
2 shared publications- Luis Arturo Ruiz‐Preciado
Light Technology Institute Karlsruhe Institute of Technology Engesserstr. 13 76131 Karlsruhe Germany
2 shared publications - Peter Krebsbach
Light Technology Institute Karlsruhe Institute of Technology Engesserstr. 13 76131 Karlsruhe Germany
2 shared publications
Latest Publications
- Open Access
- 9 July 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (16)
Semi‐Transparent Organic Photodiodes with Near‐Infrared Detection Fabricated by Inkjet Printing
Transparent organic photodetectors are promising for applications in wearable and communication electronics, where they can serve as imperceptible sensors. Yet, common fabrication techniques such as spin coating and evaporation have limited compatibility with high‐throughput production and scalability. In this work, semi‐transparent and opaque organic photodiodes, inkjet‐printed on indium tin oxide electrodes, reaching a transmittance of up to 70.6% in the visible range are demonstrated. The diode's active layer comprises a transparent donor polymer and Y7 as a non‐fullerene acceptor. This bulk heterojunction results in near‐infrared responsivity with maximum values of 12 ± 2 mA W−1 at −2 V and 840 nm for semi‐transparent diodes with Poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate electrodes and 60 ± 7 mA W−1 for opaque devices with Ag electrodes. The diodes exhibit high detection speeds of up to 3 MHz, making them suitable for near‐infrared communication systems for soft robotics as well as wearable health monitoring, as demonstrated by pulse plethysmography.
- 9 July 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (16)
Open AccessSemi‐Transparent Organic Photodiodes with Near‐Infrared Detection Fabricated by Inkjet Printing
Transparent organic photodetectors are promising for applications in wearable and communication electronics, where they can serve as imperceptible sensors. Yet, common fabrication techniques such as spin coating and evaporation have limited compatibility with high‐throughput production and scalability. In this work, semi‐transparent and opaque organic photodiodes, inkjet‐printed on indium tin oxide electrodes, reaching a transmittance of up to 70.6% in the visible range are demonstrated. The diode's active layer comprises a transparent donor polymer and Y7 as a non‐fullerene acceptor. This bulk heterojunction results in near‐infrared responsivity with maximum values of 12 ± 2 mA W−1 at −2 V and 840 nm for semi‐transparent diodes with Poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate electrodes and 60 ± 7 mA W−1 for opaque devices with Ag electrodes. The diodes exhibit high detection speeds of up to 3 MHz, making them suitable for near‐infrared communication systems for soft robotics as well as wearable health monitoring, as demonstrated by pulse plethysmography.
- Open Access
- 4 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (10)
Streamlined Inkjet‐Printing of Stretchable Organic Photodetectors
The rapid development of the Internet of Things (IoT), artificial intelligence, robotics, and wearable electronics has created new challenges and increased the demand for advanced sensing technologies. These sensors must not only exhibit tailored performance but also offer new properties like stretchability and flexibility while being compatible with industrial manufacturing. In this work, a streamlined and simplified method is introduced for fabricating stretchable Organic Photodiodes (OPDs) relying solely on industry‐grade inkjet‐printing. It is demonstrated that printed stiff islands effectively decouple strain from the stretched substrate and serve as a chemically resistant and mechanically rigid platform for printed OPDs. Printing difficulties that arose while processing the Ag electrodes on the curved island surfaces are overcome by a two‐step printing process. Finally, the study reports fully printed OPDs exhibiting peak responsivities (λ = 730 nm) of 340 mA W −1 and specific detectivities (D*) of 2.8 · 10 11 Jones at 100 Hz, both measured at −2 V. The light sensors remained functional for over 600 mechanical stretching cycles at strains up to 7%.
- 4 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (10)
Open AccessStreamlined Inkjet‐Printing of Stretchable Organic Photodetectors
The rapid development of the Internet of Things (IoT), artificial intelligence, robotics, and wearable electronics has created new challenges and increased the demand for advanced sensing technologies. These sensors must not only exhibit tailored performance but also offer new properties like stretchability and flexibility while being compatible with industrial manufacturing. In this work, a streamlined and simplified method is introduced for fabricating stretchable Organic Photodiodes (OPDs) relying solely on industry‐grade inkjet‐printing. It is demonstrated that printed stiff islands effectively decouple strain from the stretched substrate and serve as a chemically resistant and mechanically rigid platform for printed OPDs. Printing difficulties that arose while processing the Ag electrodes on the curved island surfaces are overcome by a two‐step printing process. Finally, the study reports fully printed OPDs exhibiting peak responsivities (λ = 730 nm) of 340 mA W −1 and specific detectivities (D*) of 2.8 · 10 11 Jones at 100 Hz, both measured at −2 V. The light sensors remained functional for over 600 mechanical stretching cycles at strains up to 7%.
- Open Access
- 16 March 2023
- Published by Wiley in Advanced Sensor Research
- Vol. 2 (8)
Inkjet‐Printed Microlenses Integrated onto Organic Photodiodes for Highly Accurate Proximity Sensing
The current needs for optical detectors in industrial and consumer electronics require sensors with thin form‐factors, high performance and a facile fabrication and integration. In this work, the integration of inkjet printed microlenses onto solution‐processed organic photodiodes is demonstrated to enable high‐accuracy proximity sensing via the focused induced photoresponse (FIP) effect. By precisely controlling the ink deposition and substrate properties, it is able to tune the microlens focal length from 150 to 775 μm. This allows to the appropriate microlens design to be chosen to take advantage of the FIP effect. By comparing the photocurrent ration of a device with and without microlenses, absolute proximity measurements in the range of 100 μm to 4 mm are achieved. Champion devices yield an accuracy of down to ±50 μm within three standard deviations (3σ). These results highlight the potential of the microlens‐OPD integration for highly accurate and close‐distance proximity applications in a variety of fields.
- 16 March 2023
- Published by Wiley in Advanced Sensor Research
- Vol. 2 (8)
Open AccessInkjet‐Printed Microlenses Integrated onto Organic Photodiodes for Highly Accurate Proximity Sensing
The current needs for optical detectors in industrial and consumer electronics require sensors with thin form‐factors, high performance and a facile fabrication and integration. In this work, the integration of inkjet printed microlenses onto solution‐processed organic photodiodes is demonstrated to enable high‐accuracy proximity sensing via the focused induced photoresponse (FIP) effect. By precisely controlling the ink deposition and substrate properties, it is able to tune the microlens focal length from 150 to 775 μm. This allows to the appropriate microlens design to be chosen to take advantage of the FIP effect. By comparing the photocurrent ration of a device with and without microlenses, absolute proximity measurements in the range of 100 μm to 4 mm are achieved. Champion devices yield an accuracy of down to ±50 μm within three standard deviations (3σ). These results highlight the potential of the microlens‐OPD integration for highly accurate and close‐distance proximity applications in a variety of fields.
- Open Access
- 8 February 2023
- Published by Springer Nature in npj Flexible Electronics
- Vol. 7 (1) , 1-9
Monolithically printed all-organic flexible photosensor active matrix
Upcoming technologies in the fields of flexible electronics require the cost-efficient fabrication of complex circuitry in a streamlined process. Digital printing techniques such as inkjet printing can enable such applications thanks to their inherent freedom of design permitting the mask-free deposition of multilayer optoelectronic devices without the need for subtracting techniques. Here we present an active matrix sensor array comprised of 100 inkjet-printed organic thin film transistors (OTFTs) and organic photodiodes (OPDs) monolithically integrated onto the same ultrathin substrate. Both the OTFTs and OPDs exhibited high-fabrication yield and state-of-the-art performance after the integration process. By scaling of the OPDs, we achieved integrated pixels with power consumptions down to 50 nW at one of the highest sensitivities reported to date for an all-organic integrated sensor. Finally, we demonstrated the application potential of the active matrix by static and dynamic spatial sensing of optical signals.
- 8 February 2023
- Published by Springer Nature in npj Flexible Electronics
- Vol. 7 (1) , 1-9
Open AccessMonolithically printed all-organic flexible photosensor active matrix
Upcoming technologies in the fields of flexible electronics require the cost-efficient fabrication of complex circuitry in a streamlined process. Digital printing techniques such as inkjet printing can enable such applications thanks to their inherent freedom of design permitting the mask-free deposition of multilayer optoelectronic devices without the need for subtracting techniques. Here we present an active matrix sensor array comprised of 100 inkjet-printed organic thin film transistors (OTFTs) and organic photodiodes (OPDs) monolithically integrated onto the same ultrathin substrate. Both the OTFTs and OPDs exhibited high-fabrication yield and state-of-the-art performance after the integration process. By scaling of the OPDs, we achieved integrated pixels with power consumptions down to 50 nW at one of the highest sensitivities reported to date for an all-organic integrated sensor. Finally, we demonstrated the application potential of the active matrix by static and dynamic spatial sensing of optical signals.
- Open Access
- 21 November 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (47) , 17743-17753
Gas-assisted blade-coating of organic semiconductors: molecular assembly, device fabrication and complex thin-film structuring
Incorporating gas-assisted drying with laboratory-scale blade-coating of organic semiconductors yields full performance parity with spin-coated devices and enables simultaneous spatial patterning of active layer microstructure.
- 21 November 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (47) , 17743-17753
Open AccessGas-assisted blade-coating of organic semiconductors: molecular assembly, device fabrication and complex thin-film structuring
Incorporating gas-assisted drying with laboratory-scale blade-coating of organic semiconductors yields full performance parity with spin-coated devices and enables simultaneous spatial patterning of active layer microstructure.