Lei Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lei Qin has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Chengchao Guo
6 shared publicationsFuming Wang
4 shared publicationsFeifan Shi
3 shared publicationsHaibo Wang
3 shared publications- Jin Tang3 shared publications
Jun Liu
3 shared publications
Latest Publications
- Open Access
Thermo-Mechanical Degradation Behavior of the Base–Subgrade Interface in Airport Pavements: A Sequentially Coupled Cohesive-Zone Study
The thermo-mechanical degradation of the base–subgrade interface in airport pavements was investigated using a three-dimensional sequentially coupled finite element framework in ABAQUS 2023, in which progressive interfacial debonding was described by a bilinear cohesive-zone model through the damage variable CSDMG. The results show that thermal loading markedly accelerates interface degradation when combined with moving wheel loads. Compared with the wheel-loading-only condition, thermo-mechanical coupling advances the first damage initiation from 0.04993 h to 0.00254 h and shortens the severe-degradation stage from 1.000 h to 0.00927 h. This acceleration is attributed to a thermal stress pre-weakening effect, whereby constrained thermal deformation partially consumes the available cohesive resistance and shifts the interface closer to the softening threshold before external loading is applied. A decomposition of the mixed-mode initiation criterion further indicates that the first damage event is governed by synergistic normal–shear interaction, with the normalized contribution ratio (tn/tn0)2:(ts/ts0)2 = 0.38:0.62, showing that wheel-induced shear is the dominant trigger while tensile opening induced by thermal curling provides substantial preconditioning assistance. In addition, a representative normalized comparison between simulated average CSDMG and cumulative AE hit count demonstrates a consistent stage evolution from distributed deformation to accelerated localization and residual stabilization. These findings indicate that the base–subgrade interface should be treated as a temperature-sensitive weak layer in airport pavement assessment, particularly near joints and other discontinuity-controlled regions.
Open AccessThermo-Mechanical Degradation Behavior of the Base–Subgrade Interface in Airport Pavements: A Sequentially Coupled Cohesive-Zone Study
The thermo-mechanical degradation of the base–subgrade interface in airport pavements was investigated using a three-dimensional sequentially coupled finite element framework in ABAQUS 2023, in which progressive interfacial debonding was described by a bilinear cohesive-zone model through the damage variable CSDMG. The results show that thermal loading markedly accelerates interface degradation when combined with moving wheel loads. Compared with the wheel-loading-only condition, thermo-mechanical coupling advances the first damage initiation from 0.04993 h to 0.00254 h and shortens the severe-degradation stage from 1.000 h to 0.00927 h. This acceleration is attributed to a thermal stress pre-weakening effect, whereby constrained thermal deformation partially consumes the available cohesive resistance and shifts the interface closer to the softening threshold before external loading is applied. A decomposition of the mixed-mode initiation criterion further indicates that the first damage event is governed by synergistic normal–shear interaction, with the normalized contribution ratio (tn/tn0)2:(ts/ts0)2 = 0.38:0.62, showing that wheel-induced shear is the dominant trigger while tensile opening induced by thermal curling provides substantial preconditioning assistance. In addition, a representative normalized comparison between simulated average CSDMG and cumulative AE hit count demonstrates a consistent stage evolution from distributed deformation to accelerated localization and residual stabilization. These findings indicate that the base–subgrade interface should be treated as a temperature-sensitive weak layer in airport pavement assessment, particularly near joints and other discontinuity-controlled regions.
- 1 May 2026
- Published by Springer Nature in Journal of Central South University
- Vol. 33 (5) , 2289-2301
Dynamic damage evolution of track slab concrete and filling layer self-compacting concrete based on acoustic emission
- 1 May 2026
- Published by Springer Nature in Journal of Central South University
- Vol. 33 (5) , 2289-2301
Dynamic damage evolution of track slab concrete and filling layer self-compacting concrete based on acoustic emission
- Open Access
- 9 April 2026
- Published by Elsevier in SSRN Electronic Journal
Mechanical evolution of an early-strength and fatigue-resistant polymer for ballastless track settlement restoration
Rapid restoration of ballastless track settlement requires grouting materials that can rapidly develop sufficient bearing capacity and maintain stable performance under repeated train loads. In this study, a novel early-strength and fatigue-resistant polymer (ESFRP) was developed and systematically investigated. Uniaxial compression tests at different curing ages and fatigue compression tests under various stress ratios were conducted on ESFRP specimens. Acoustic emission and digital image correlation techniques were used to characterize the damage evolution during compression, while computed tomography and scanning electron microscopy were employed to investigate the micro- and meso-structural characteristics and failure mechanisms. The results show that the compressive strength of ESFRP reached 43.51 MPa after 1 h and stabilized at about 63.85 MPa after 28 d, indicating excellent early-strength performance. The average peak strain reached 32.78%, reflecting pronounced ductile behavior. A constitutive model related to curing age was established. Under cyclic loading, the fatigue performance parameters of ESFRP were divided into adjustment, stable variation, and failure stages. The dynamic elastic modulus decreased with increasing cycle number, whereas the accumulative strain converged to a similar level of about 19.64% at failure under different stress ratios. A predictive model linking stress ratio to fatigue life was established. Microstructural analysis indicates that ESFRP is a dense multiphase composite with very low porosity, which provides the structural basis for its high early strength and deformation capacity. Under uniaxial compression, failure is governed by stress concentration in the polyurea matrix induced by SiO₂ particle fragmentation, whereas under fatigue loading, failure mainly results from the accumulation of fatigue damage in the polyurea matrix, leading to lamellar tearing. These findings support the application of ESFRP in ballastless track settlement restoration.
- 9 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMechanical evolution of an early-strength and fatigue-resistant polymer for ballastless track settlement restoration
Rapid restoration of ballastless track settlement requires grouting materials that can rapidly develop sufficient bearing capacity and maintain stable performance under repeated train loads. In this study, a novel early-strength and fatigue-resistant polymer (ESFRP) was developed and systematically investigated. Uniaxial compression tests at different curing ages and fatigue compression tests under various stress ratios were conducted on ESFRP specimens. Acoustic emission and digital image correlation techniques were used to characterize the damage evolution during compression, while computed tomography and scanning electron microscopy were employed to investigate the micro- and meso-structural characteristics and failure mechanisms. The results show that the compressive strength of ESFRP reached 43.51 MPa after 1 h and stabilized at about 63.85 MPa after 28 d, indicating excellent early-strength performance. The average peak strain reached 32.78%, reflecting pronounced ductile behavior. A constitutive model related to curing age was established. Under cyclic loading, the fatigue performance parameters of ESFRP were divided into adjustment, stable variation, and failure stages. The dynamic elastic modulus decreased with increasing cycle number, whereas the accumulative strain converged to a similar level of about 19.64% at failure under different stress ratios. A predictive model linking stress ratio to fatigue life was established. Microstructural analysis indicates that ESFRP is a dense multiphase composite with very low porosity, which provides the structural basis for its high early strength and deformation capacity. Under uniaxial compression, failure is governed by stress concentration in the polyurea matrix induced by SiO₂ particle fragmentation, whereas under fatigue loading, failure mainly results from the accumulation of fatigue damage in the polyurea matrix, leading to lamellar tearing. These findings support the application of ESFRP in ballastless track settlement restoration.
- 23 September 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 495
Experimental study on crack repair reinforcement of cement stabilized macadam based on permeable polymer
- 23 September 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 495
Experimental study on crack repair reinforcement of cement stabilized macadam based on permeable polymer
- 20 May 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 432
Experimental study on compressive mechanical properties of underwater non-dispersible polymer with AE
- 20 May 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 432
Experimental study on compressive mechanical properties of underwater non-dispersible polymer with AE
- 21 February 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 419
Fracture characteristics of cement-stabilized macadam using three-point bending test
- 21 February 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 419
Fracture characteristics of cement-stabilized macadam using three-point bending test
- 3 February 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 416
Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane
- 3 February 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 416
Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane