Heiner Oesterlin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Heiner Oesterlin has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Thorsten Michler
Fraunhofer Institute for Mechanics of Materials IWM, Woehlerstrasse 11, 79108 Freiburg, Germany
5 shared publications - Carl Fischer
Fraunhofer Institute for Mechanics of Materials IWM, Woehlerstrasse 11, 79108 Freiburg, Germany
4 shared publications Ken Wackermann
3 shared publicationsFabien Ebling
2 shared publications- Tomás Freitas
Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
2 shared publications - Adrienne Muth
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA
1 shared publication
Latest Publications
- Open Access
- 29 October 2025
- Published by Elsevier in International Journal of Fatigue
- Vol. 204
Crack initiation due to low cycle fatigue in X60 pipeline steel tested in high pressure gaseous hydrogen using hollow and conventional specimens
- 29 October 2025
- Published by Elsevier in International Journal of Fatigue
- Vol. 204
Open AccessCrack initiation due to low cycle fatigue in X60 pipeline steel tested in high pressure gaseous hydrogen using hollow and conventional specimens
- Open Access
- 21 June 2025
- Published by Elsevier in Computational Materials Science
- Vol. 258
Fully coupled crystal plasticity and hydrogen diffusion modeling of X52 pipeline steel and weld microstructures
- 21 June 2025
- Published by Elsevier in Computational Materials Science
- Vol. 258
Open AccessFully coupled crystal plasticity and hydrogen diffusion modeling of X52 pipeline steel and weld microstructures
- Open Access
- 10 March 2025
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 319
Assessing hydrogen embrittlement of alloy 718: Hollow and conventional tensile tests
- 10 March 2025
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 319
Open AccessAssessing hydrogen embrittlement of alloy 718: Hollow and conventional tensile tests
- Open Access
- 16 September 2024
- Published by Springer Nature in MRS Bulletin
- Vol. 49 (11) , 1112-1120
Tensile testing in high-pressure gaseous hydrogen using the hollow specimen method
Metallic materials, predominantly steels, are the most common structural materials in the various components along the hydrogen supply chain. Ensuring their sustainable and safe use in hydrogen technologies is a key factor in the ramp-up of the hydrogen economy. This requires extensive materials qualification, however, most of the accepted; and standardized test methods for determining the influence of gaseous hydrogen on metallic materials describe complex and costly procedures that are only available to a very limited extent worldwide. The hollow specimen technique is a simple, rapid, and economical method designed to overcome the limitations of the current methods for the qualification of metallic materials under high-pressure hydrogen gas. However, this technique is not yet standardized. The TransHyDE-H2Hohlzug project is presented in this article, along with the main steps required to optimize the hollow specimen technique. This includes closing knowledge gaps related to the specimen geometry, surface quality, and gas purity in dedicated working packages, thus contributing to a comprehensive standardization of the technique for tests in high-pressure hydrogen gas. Impact statement: The hydrogen economy is considered a key solution for achieving climate neutrality in Europe, as it plays a crucial role in the decarbonization of sectors such as transport, industry, power, etc. Ensuring the safety and reliability of infrastructure is crucial for the ramp-up of the hydrogen economy. Therefore, it is necessary to meticulously study the materials and components used for infrastructure under conditions that closely resemble in-service conditions. The currently standardized methods are limited as they do not precisely replicate in-service conditions, and when they do, they are often complex, costly, and not easily accessible. This article presents the hollow specimen technique, a simple, and economical method developed to address the limitations of current standardized methods. The results from this work will contribute to the standardization of this technique for tests in high-pressure hydrogen gas. This will enable a faster evaluation of materials for hydrogen applications by industry and academia, thereby contributing to the growth of the hydrogen economy. Graphical
- 16 September 2024
- Published by Springer Nature in MRS Bulletin
- Vol. 49 (11) , 1112-1120
Open AccessTensile testing in high-pressure gaseous hydrogen using the hollow specimen method
Metallic materials, predominantly steels, are the most common structural materials in the various components along the hydrogen supply chain. Ensuring their sustainable and safe use in hydrogen technologies is a key factor in the ramp-up of the hydrogen economy. This requires extensive materials qualification, however, most of the accepted; and standardized test methods for determining the influence of gaseous hydrogen on metallic materials describe complex and costly procedures that are only available to a very limited extent worldwide. The hollow specimen technique is a simple, rapid, and economical method designed to overcome the limitations of the current methods for the qualification of metallic materials under high-pressure hydrogen gas. However, this technique is not yet standardized. The TransHyDE-H2Hohlzug project is presented in this article, along with the main steps required to optimize the hollow specimen technique. This includes closing knowledge gaps related to the specimen geometry, surface quality, and gas purity in dedicated working packages, thus contributing to a comprehensive standardization of the technique for tests in high-pressure hydrogen gas. Impact statement: The hydrogen economy is considered a key solution for achieving climate neutrality in Europe, as it plays a crucial role in the decarbonization of sectors such as transport, industry, power, etc. Ensuring the safety and reliability of infrastructure is crucial for the ramp-up of the hydrogen economy. Therefore, it is necessary to meticulously study the materials and components used for infrastructure under conditions that closely resemble in-service conditions. The currently standardized methods are limited as they do not precisely replicate in-service conditions, and when they do, they are often complex, costly, and not easily accessible. This article presents the hollow specimen technique, a simple, and economical method developed to address the limitations of current standardized methods. The results from this work will contribute to the standardization of this technique for tests in high-pressure hydrogen gas. This will enable a faster evaluation of materials for hydrogen applications by industry and academia, thereby contributing to the growth of the hydrogen economy. Graphical
- Open Access
- 22 January 2024
- Published by Wiley in Energy Technology
- Vol. 13 (2)
Evaluation of Lifetime Predictions for Future Hydrogen Pipelines by Different Fracture Mechanics‐Based Design Codes
The realization of a hydrogen transport network requires the requalification of existing high‐pressure natural gas pipelines and the design and construction of new hydrogen pipelines. Therefore, appropriate design codes are needed, which consider the detrimental effects of gaseous hydrogen on the mechanical properties and ensure a robust, but not too conservative, lifetime concept. For the assessment of hydrogen pipelines, the ASME B31.12 is understood as a benchmark standard. Recently, the technical rule DVGW G 464 (2023) was published in Germany. Both standards consider a fracture mechanics‐based concept, where the pipeline design lifetime is assessed by the hydrogen‐assisted fatigue crack growth of a pre‐existing defect until a defined lifetime criterion is reached. This article compares both concepts within a use case study, where influencing factors on the lifetime predictions are identified and discussed. Relatively similar results are obtained for typical loading scenarios, whereby the ASME B31.12 predicts more allowable cycles compared to the DVGW G 464 mostly arising from a different assumed crack length. To reduce the conservatism, the focus in the design and assessment of hydrogen pipelines should be placed on a detectable small initial crack size and the measurement of material‐specific crack growth curves resulting in pronounced lifetime enhancements.
- 22 January 2024
- Published by Wiley in Energy Technology
- Vol. 13 (2)
Open AccessEvaluation of Lifetime Predictions for Future Hydrogen Pipelines by Different Fracture Mechanics‐Based Design Codes
The realization of a hydrogen transport network requires the requalification of existing high‐pressure natural gas pipelines and the design and construction of new hydrogen pipelines. Therefore, appropriate design codes are needed, which consider the detrimental effects of gaseous hydrogen on the mechanical properties and ensure a robust, but not too conservative, lifetime concept. For the assessment of hydrogen pipelines, the ASME B31.12 is understood as a benchmark standard. Recently, the technical rule DVGW G 464 (2023) was published in Germany. Both standards consider a fracture mechanics‐based concept, where the pipeline design lifetime is assessed by the hydrogen‐assisted fatigue crack growth of a pre‐existing defect until a defined lifetime criterion is reached. This article compares both concepts within a use case study, where influencing factors on the lifetime predictions are identified and discussed. Relatively similar results are obtained for typical loading scenarios, whereby the ASME B31.12 predicts more allowable cycles compared to the DVGW G 464 mostly arising from a different assumed crack length. To reduce the conservatism, the focus in the design and assessment of hydrogen pipelines should be placed on a detectable small initial crack size and the measurement of material‐specific crack growth curves resulting in pronounced lifetime enhancements.
- 5 April 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (65) , 25609-25618
Tensile testing in high pressure gaseous hydrogen using conventional and tubular specimens: Austenitic stainless steels
- 5 April 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (65) , 25609-25618
Tensile testing in high pressure gaseous hydrogen using conventional and tubular specimens: Austenitic stainless steels
- 9 February 2023
- Published by Elsevier in International Journal of Fatigue
- Vol. 171
Codes and standards for the fatigue-based design of hydrogen infrastructure components
- 9 February 2023
- Published by Elsevier in International Journal of Fatigue
- Vol. 171
Codes and standards for the fatigue-based design of hydrogen infrastructure components
- 1 September 2021
- Published by Elsevier in International Journal of Fatigue
- Vol. 150, 106308
A lifetime model for creep-fatigue interaction with applications to the creep resistant steel P92
- 1 September 2021
- Published by Elsevier in International Journal of Fatigue
- Vol. 150, 106308
A lifetime model for creep-fatigue interaction with applications to the creep resistant steel P92