Mario Di Stasio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Mario Di Stasio has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Fabrizio Nicolosi
Department of Industrial Engineering, University of Naples Federico II, Via Claudio 21, 80125 Naples, Italy
6 shared publications - Markus Meindl
Institute of Power Electronics, Friedrich-Alexander-Universität Erlangen-Nürnberg, 90429 Nuermberg, Germany
3 shared publications - Valerio Marciello
Università degli Studi di Napoli Federico II
3 shared publications - Alexis Laurent
Technical University of Denmark
2 shared publications - Bruno Lemoine
Bern University of Applied Sciences, BFH Energy Storage Research Centre,Bern,Switzerland
2 shared publications - Giuseppe Grazioso2 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Reduced-Order Engine Models For Combined Aircraft And Engine Design
An aircraft and its engines form a tightly coupled system, yet conceptual design still treats the engine as a fixed or merely rescaled performance deck. This work presents a reduced-order rubber engine methodology for the combined conceptual design of aircraft and engine. Semi-empirical sizing laws are embedded in a zero-dimensional cycle model, so that spool speeds, efficiencies and cooling flows are derived rather than prescribed, and each of seven turboprop and turbofan architectures with one to three spools is reduced to a handful of design variables. Higher-fidelity engine performance models were constructed from publicly available data of existing engines. The reduced-order models were subsequently benchmarked against these reference models to evaluate their accuracy and predictive capability. For each engine family, a feasibility classifier and a performance regressor spanning all its architectures are trained on thousands of converged cycle designs and drive a runtime multi-objective engine optimization embedded in the aircraft sizing loop. A single pair of networks covers an entire family with held-out errors below one percent, so that the engine architecture becomes a decision variable of the search rather than a modeling choice fixed beforehand. The methodology is applied to a turboprop-powered tactical transport type of aircraft over a design space of wing area, aspect ratio and vertical-tail volume, every configuration of which converges to a matched airframe and engine. The approach makes the joint conceptual design of engine and aircraft tractable, and prices each top-level requirement at conceptual cost.
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessReduced-Order Engine Models For Combined Aircraft And Engine Design
An aircraft and its engines form a tightly coupled system, yet conceptual design still treats the engine as a fixed or merely rescaled performance deck. This work presents a reduced-order rubber engine methodology for the combined conceptual design of aircraft and engine. Semi-empirical sizing laws are embedded in a zero-dimensional cycle model, so that spool speeds, efficiencies and cooling flows are derived rather than prescribed, and each of seven turboprop and turbofan architectures with one to three spools is reduced to a handful of design variables. Higher-fidelity engine performance models were constructed from publicly available data of existing engines. The reduced-order models were subsequently benchmarked against these reference models to evaluate their accuracy and predictive capability. For each engine family, a feasibility classifier and a performance regressor spanning all its architectures are trained on thousands of converged cycle designs and drive a runtime multi-objective engine optimization embedded in the aircraft sizing loop. A single pair of networks covers an entire family with held-out errors below one percent, so that the engine architecture becomes a decision variable of the search rather than a modeling choice fixed beforehand. The methodology is applied to a turboprop-powered tactical transport type of aircraft over a design space of wing area, aspect ratio and vertical-tail volume, every configuration of which converges to a matched airframe and engine. The approach makes the joint conceptual design of engine and aircraft tractable, and prices each top-level requirement at conceptual cost.
- Open Access
Propagation of Hydrogen-Subsystem Characteristics to Aircraft Level in a Liquid-Hydrogen Fuel-Cell Short-Range Aircraft
Liquid-hydrogen fuel-cell propulsion is a promising option for reducing the climate impact of short-range aviation, but its aircraft-level feasibility depends on the concurrent integration of cryogenic storage, megawatt-class propulsion systems, and thermal management. This paper presents an integrated conceptual design and technology-sensitivity assessment of a 101-passenger liquid-hydrogen fuel-cell aircraft, targeting a 1000 nmi design range and a 2040 entry into service, framed within the European Union FAME project. A JPAD-based aircraft sizing framework is coupled with a surrogate model for cryogenic tank sizing to investigate how selected hydrogen-subsystem characteristics propagate, through mission-fuel and tank-sizing convergence loops, to configuration-level performance and compliance with top-level aircraft requirements. The storage-system trade study identifies 2.0 bar as the most favourable sampled tank venting pressure; relative to the other investigated pressure levels, this solution reduces MTOM and design-mission block fuel by up to 8.1% and 9.2%, respectively. The propulsion-architecture study selects a four-engine layout as the best compromise between one-engine-inoperative performance, spanwise structural relief, nacelle drag, and mission fuel consumption, yielding a 2.6–2.7% lower MTOM and a 3.5–3.7% lower design-mission block fuel than the two- and six-engine alternatives. A technology-sensitivity matrix spanning 51–55% fuel-cell efficiency and 60–100% cooling-line speed recovery reveals a non-linear increase in installed power, aircraft mass, and hydrogen consumption as either parameter deteriorates. For the fixed-geometry FAME baseline, the onset of multiple TLAR violations occurs as speed recovery falls through approximately the 70–80% region, depending on fuel-cell efficiency. Within the assumptions of the present model, maintaining fuel-cell efficiency at or above approximately 53% and cooling-line speed recovery above this transition region therefore represents an approximate feasibility condition.
Open AccessPropagation of Hydrogen-Subsystem Characteristics to Aircraft Level in a Liquid-Hydrogen Fuel-Cell Short-Range Aircraft
Liquid-hydrogen fuel-cell propulsion is a promising option for reducing the climate impact of short-range aviation, but its aircraft-level feasibility depends on the concurrent integration of cryogenic storage, megawatt-class propulsion systems, and thermal management. This paper presents an integrated conceptual design and technology-sensitivity assessment of a 101-passenger liquid-hydrogen fuel-cell aircraft, targeting a 1000 nmi design range and a 2040 entry into service, framed within the European Union FAME project. A JPAD-based aircraft sizing framework is coupled with a surrogate model for cryogenic tank sizing to investigate how selected hydrogen-subsystem characteristics propagate, through mission-fuel and tank-sizing convergence loops, to configuration-level performance and compliance with top-level aircraft requirements. The storage-system trade study identifies 2.0 bar as the most favourable sampled tank venting pressure; relative to the other investigated pressure levels, this solution reduces MTOM and design-mission block fuel by up to 8.1% and 9.2%, respectively. The propulsion-architecture study selects a four-engine layout as the best compromise between one-engine-inoperative performance, spanwise structural relief, nacelle drag, and mission fuel consumption, yielding a 2.6–2.7% lower MTOM and a 3.5–3.7% lower design-mission block fuel than the two- and six-engine alternatives. A technology-sensitivity matrix spanning 51–55% fuel-cell efficiency and 60–100% cooling-line speed recovery reveals a non-linear increase in installed power, aircraft mass, and hydrogen consumption as either parameter deteriorates. For the fixed-geometry FAME baseline, the onset of multiple TLAR violations occurs as speed recovery falls through approximately the 70–80% region, depending on fuel-cell efficiency. Within the assumptions of the present model, maintaining fuel-cell efficiency at or above approximately 53% and cooling-line speed recovery above this transition region therefore represents an approximate feasibility condition.
- Open Access
- 15 October 2025
- Published by Elsevier in Applied Energy
- Vol. 402
A simulation-based mission optimization approach for regional transport hybrid-electric aircraft
- 15 October 2025
- Published by Elsevier in Applied Energy
- Vol. 402
Open AccessA simulation-based mission optimization approach for regional transport hybrid-electric aircraft
- Open Access
- 26 April 2025
- Published by Elsevier in Transportation Research Part D: Transport and Environment
- Vol. 144
Evaluating hybrid-electric aircraft viability: The Ampaire Eco Caravan cost analysis
- 26 April 2025
- Published by Elsevier in Transportation Research Part D: Transport and Environment
- Vol. 144
Open AccessEvaluating hybrid-electric aircraft viability: The Ampaire Eco Caravan cost analysis
- Open Access
- 14 March 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 26
A mathematical model for hybrid-electric propulsion system for regional propeller-driven aircraft
- 14 March 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 26
Open AccessA mathematical model for hybrid-electric propulsion system for regional propeller-driven aircraft
- Open Access
- 21 December 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 434
Prospective life cycle inventory datasets for conventional and hybrid-electric aircraft technologies
- 21 December 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 434
Open AccessProspective life cycle inventory datasets for conventional and hybrid-electric aircraft technologies
- Open Access
Decarbonised Future Regional Airport Infrastructure
Sustainability and, especially, emission reductions are significant challenges for airports currently being addressed. The Clean Sky 2 project GENESIS addresses the environmental sustainability of hybrid-electric 50-passenger aircraft systems in a life cycle perspective to support the development of a technology roadmap for the transition to sustainable and competitive electric aircraft systems. This article originates from the GENESIS research and describes various options for ground power supply at a regional airport. Potential solutions for airport infrastructure with a short (2030), medium (2040) and long (2050) time horizon are proposed. This analysis includes estimating the future energy demand per day, month and year. In addition, the current flight plan based on conventional aircraft is adapted to the needs of a 50-PAX regional aircraft. Thus, this article provides an overview of the energy demand of a regional airport, divided into individual time horizons.
Open AccessDecarbonised Future Regional Airport Infrastructure
Sustainability and, especially, emission reductions are significant challenges for airports currently being addressed. The Clean Sky 2 project GENESIS addresses the environmental sustainability of hybrid-electric 50-passenger aircraft systems in a life cycle perspective to support the development of a technology roadmap for the transition to sustainable and competitive electric aircraft systems. This article originates from the GENESIS research and describes various options for ground power supply at a regional airport. Potential solutions for airport infrastructure with a short (2030), medium (2040) and long (2050) time horizon are proposed. This analysis includes estimating the future energy demand per day, month and year. In addition, the current flight plan based on conventional aircraft is adapted to the needs of a 50-PAX regional aircraft. Thus, this article provides an overview of the energy demand of a regional airport, divided into individual time horizons.
- Open Access
Design Exploration for Sustainable Regional Hybrid-Electric Aircraft: A Study Based on Technology Forecasts
The environmental impact of aviation in terms of noise and pollutant emissions has gained public attention in the last few years. In addition, the foreseen financial benefits of an increased energy efficiency have motivated the transport industry to invest in propulsion alternatives. This work is collocated within the Clean Sky 2 project GENESIS, focused on the environmental sustainability of 50-passenger hybrid-electric aircraft from a life-cycle-based perspective to support the development of a technology roadmap for transitioning towards sustainable and competitive electric aircraft systems. While several studies have already focused on the definition of possible aircraft designs combining several propulsion systems, the novelty of the present work is to consider technology forecasts and more comprehensive indicators in the design phase. These include the performance and emissions on a 200 nmi typical mission, which reflects the most economically attractive range for aircraft in the regional class. The work proposes a complete exploration of three major technology streams for energy storage: batteries, fuel cells, and turbine internal combustion engine generators, also including possible combinations of those technologies. The exploration was carried out through the execution of several designs of experiments aiming at the identification of the most promising solutions in terms of aircraft configuration for three different time horizons: short-term, 2025–2035; medium-term, 2035–2045; and long-term, 2045–2050+. As a result, in the short-term scenario, fuel energy consumption is estimated to be reduced by around 24% with respect to conventional aircraft with the same entry-into-service year thanks to the use of hybrid propulsive systems with lithium batteries. Fuel saving increases to 45% in the medium-term horizon due to the improvement in the energy density of storage systems. By the year 2050, when hydrogen fuel cells are estimated to be mature enough to completely replace kerosene-based engines, the forthcoming hybrid-electric aircraft promise no NOx and CO2 direct emissions, while being approximately 50% heavier than conventional ones.
Open AccessDesign Exploration for Sustainable Regional Hybrid-Electric Aircraft: A Study Based on Technology Forecasts
The environmental impact of aviation in terms of noise and pollutant emissions has gained public attention in the last few years. In addition, the foreseen financial benefits of an increased energy efficiency have motivated the transport industry to invest in propulsion alternatives. This work is collocated within the Clean Sky 2 project GENESIS, focused on the environmental sustainability of 50-passenger hybrid-electric aircraft from a life-cycle-based perspective to support the development of a technology roadmap for transitioning towards sustainable and competitive electric aircraft systems. While several studies have already focused on the definition of possible aircraft designs combining several propulsion systems, the novelty of the present work is to consider technology forecasts and more comprehensive indicators in the design phase. These include the performance and emissions on a 200 nmi typical mission, which reflects the most economically attractive range for aircraft in the regional class. The work proposes a complete exploration of three major technology streams for energy storage: batteries, fuel cells, and turbine internal combustion engine generators, also including possible combinations of those technologies. The exploration was carried out through the execution of several designs of experiments aiming at the identification of the most promising solutions in terms of aircraft configuration for three different time horizons: short-term, 2025–2035; medium-term, 2035–2045; and long-term, 2045–2050+. As a result, in the short-term scenario, fuel energy consumption is estimated to be reduced by around 24% with respect to conventional aircraft with the same entry-into-service year thanks to the use of hybrid propulsive systems with lithium batteries. Fuel saving increases to 45% in the medium-term horizon due to the improvement in the energy density of storage systems. By the year 2050, when hydrogen fuel cells are estimated to be mature enough to completely replace kerosene-based engines, the forthcoming hybrid-electric aircraft promise no NOx and CO2 direct emissions, while being approximately 50% heavier than conventional ones.