HFHuanran Feng

Huanran Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huanran Feng has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Self-Powered Multivariable Organic Photovoltaic Sensors for Accurate Volatile Organic Compound Discrimination

    by Huanran Feng, Zhihui Liu, Taoping Liu, Yunhe Li, Chuang Yu, Siwu Li, Yinhui Bao, Xing Chen, Chen Su, Danyao Qu, et al.

    Most existing VOC sensors rely on battery power and only single-parameter outputs, limiting long-term deployment, maintenance efficiency, and chemical discrimination. Here, we report a self-powered multivariable photovoltaic sensor (MPVS) that repurposes an organic photovoltaic junction as an information-rich VOC sensing platform. By integrating a gas-permeable silver nanowire electrode with a donor–acceptor bulk-heterojunction active layer, the MPVS enables efficient analyte access while maintaining stable photovoltaic operation under illumination. Exposure to VOCs induces coupled and reversible changes in open-circuit voltage (VOC) and short-circuit current density (JSC), providing two orthogonal sensing features without external power input. Using a single PM6:Y6 junction, we demonstrate concentration-dependent responses and reliable discrimination of representative VOCs. Extending the concept to a five-element MPVS array incorporating different Y-series acceptors generates high-dimensional photovoltaic fingerprints that enable accurate identification of eight chemically distinct VOCs. Density functional theory (DFT) calculations and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) reveal that analyte-dependent noncovalent interactions, particularly strong hydrogen bonding in the case of formic acid, underlie the observed selectivity. By integrating energy harvesting and multivariate sensing within a single organic photovoltaic platform, this work establishes a scalable, battery-free approach to artificial olfaction, offering a promising pathway for distributed and long-term VOC monitoring systems.

  • Open Access

    Visible-light Sensitive MOF-enabled zwitterionic polymer modified self-cleaning PVDF membrane for durable oil/water emulsion separation

    by Yanming Shao, Xianyu Yang, Caifeng Hao, Wenli Peng, Wenli Ma, Ziwei Jiao, Guohao Gao, Huanran Feng

    Membrane separation is an eco-efficient method for oily wastewater treatment, yet membrane fouling from oil adhesion and organic buildup severely cuts permeate flux, separation efficiency and membrane service life, restricting its long-term use. This work fabricates a superhydrophilic self-cleaning oil-water separation membrane by combining visible-light photo-Fenton catalysis with zwitterionic polymer modification. Dual-functional metal-organic framework NM88B-Br with atom transfer radical polymerization (ATRP) initiators was synthesized by solvothermal method. It enables visible-light photo-Fenton activity, while bromine sites support subsequent ATRP grafting. The NM88B-Br was blended into polyvinylidene fluoride, forming composite membranes via nonsolvent-induced phase separation. Zwitterionic poly (sulfobetaine methacrylate) (PSBMA) brushes were then tethered to membrane surfaces via surface-initiated ATRP to boost hydrophilicity and fouling resistance. Synergy between the PSBMA hydration layer and NM88B-Br photocatalysis grants the membrane superhydrophilicity and underwater superoleophobicity. It delivers gravity-driven fluxes of 94.5-110.8 L m-2 h-1 and over 95.6% separation efficiency for diverse oil-in-water emulsions. The membrane features excellent visible-light-responsive self-cleaning capacity and can degrade 92% of methylene blue after 120 min of visible-light irradiation, and this photocatalytic degradation of organic contaminants effectively recovers the separation performance of membrane and strengthens its long-term operational stability. This strategy helps design multifunctional membranes for stable oily wastewater remediation.

  • Open Access

    A Ratiometric Electrochemical Sensor Based on Molecularly Imprinted Polymer prepared by ATRP Polymerization for Selective Detection of Rutin

    by Huanran Feng, Mengyi Kang, Wenli Ma, Wenli Peng, Guohao Gao, Xianyu Yang, Ziwei Jiao, Yanming Shao

    A novel molecularly imprinted ratiometric electrochemical sensor was developed by modifying MoS2@Au-S-β-CD-MB nanocomposites and Fe3O4@COF@MIP on the electrode to achieve the selective detection of rutin. MoS2@Au-S-β-CD nanocomposites were synthesized, enabling the immobilization of the electrochemical reference probe methylene blue (MB) through host-guest complexation with β-cyclodextrin. Subsequently, a covalent organic framework (COF) shell was coated onto Fe3O4 nanoparticles, followed by the grafting of an atom transfer radical polymerization (ATRP) initiator onto the Fe3O4@COF carrier via “click” chemistry. Molecularly imprinted polymers (MIPs) were then fabricated on the Fe3O4@COF surface through ATRP polymerization. Finally, the Fe3O4@COF@MIP and MoS2@Au-S-β-CD@MB composites were sequentially drop-cast onto a glassy carbon electrode to construct the sensor. The MoS2@Au-S-β-CD@MB composite material not only amplifies the electrochemical signal but also firmly immobilizes the electrochemical reference probe MB.The preparation process of Fe3O4@COF@MIP is facilitated by the magnetic responsiveness of magnetic core. COF as a polymerization carrier possess high porosity and high specific surface area, which allows more imprinting sites for MIP by ATRP polymerization. The sensor exhibited a gradual increase in peak current with increasing rutin concentration, while the reference signal from MB remained stable, enabling ratiometric detection. Under optimal conditions, linear response was observed in the concentration range of 0.7 μM-22 μM of rutin, with a detection limit of 0.68 μM, alongside high selectivity and robust anti-interference capability. The developed sensor was successfully applied to detect rutin in real samples with recovery rates from 96.8% to 98.5%.

  • Open Access

    Preparation of a Photocatalytic Self-Cleaning Membrane with pH-Responsive Property for On-Demand Oil/Water Separation

    by Yanming Shao, Wenli Ma, Wenli Peng, Huanran Feng, Xianyu Yang, Ziwei Jiao, Guohao Gao

    Membrane separation has attracted considerable attention for oil/water treatment owing to its high efficiency and low energy consumption. However, membrane fouling and limited surface functionality still hinder its practical applications. In this study, a poly (vinylidene fluoride) (PVDF) membrane with pH-responsive wettability and photocatalytic self-cleaning properties was fabricated by combining nonsolvent-induced phase separation (NIPS) with atom transfer radical polymerization (ATRP). Visible light responsive photocatalytic CdS/MIL-125-Br particles containing ATRP initiator sites were incorporated into the PVDF matrix. Zwitterionic poly (sulfobetaine methacrylate) (PSBMA) polymer brush was then grafted onto the surface of membrane to improve the hydrophilicity and antifouling performance. Benefit from the ”living” ability of the ATRP, poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) polymer brush with pH-responsive property was further introduced to construct a stimulate responsive surface. The obtained PVDF/CdS/MIL-125-PSADA-3 membrane exhibited a reversible wettability transition under different pH conditions and could separate both oil-in-water and water-in-oil emulsions. After five separation cycles, the separation efficiencies of the membrane remained above 92.8% for oil-in-water emulsions and 96.5% for water-in-oil emulsions. In addition, the membrane could be regenerated within 10 min under visible-light irradiation, while the flux recovery ratio remained higher than 95.5%. The membrane showed stable separation and excellent self-cleaning capability, indicating its potential application for complex oily wastewater treatment.

  • Open Access

    A Ratiometric Electrochemical Sensor Based on Molecularly Imprinted Polymer prepared by ATRP Polymerization for Selective Detection of Rutin

    by Huanran Feng, Hao Bai, Wenli Ma, Wenli Peng, Guohao Gao, Xianyu Yang, Ziwei Jiao, Yanming Shao

    A novel molecularly imprinted ratiometric electrochemical sensor was developed by modifying MoS2@Au-S-β-CD-MB nanocomposites and Fe3O4@COF@MIP on the electrode to achieve the selective detection of rutin. MoS2@Au-S-β-CD nanocomposites were synthesized, enabling the immobilization of the electrochemical reference probe methylene blue (MB) through host-guest complexation with β-cyclodextrin. Subsequently, a covalent organic framework (COF) shell was coated onto Fe3O4 nanoparticles, followed by the grafting of an atom transfer radical polymerization (ATRP) initiator onto the Fe3O4@COF carrier via ”click” chemistry. Molecularly imprinted polymers (MIPs) were then fabricated on the Fe3O4@COF surface through ATRP polymerization. Finally, the Fe3O4@COF@MIP and MoS2@Au-S-β-CD@MB composites were sequentially drop-cast onto a glassy carbon electrode to construct the sensor. The MoS2@Au-S-β-CD@MB composite material not only amplifies the electrochemical signal but also firmly immobilizes the electrochemical reference probe MB. The preparation process of Fe3O4@COF@MIP is facilitated by the magnetic responsiveness of magnetic core. COF as a polymerization carrier possess high porosity and high specific surface area, which allows more imprinting sites for MIP by ATRP polymerization. The sensor exhibited a gradual increase in peak current with increasing rutin concentration, while the reference signal from MB remained stable, enabling ratiometric detection. Under optimal conditions, linear response was observed in the concentration range of 0.7 μM-22 μM of rutin, with a detection limit of 0.68 μM, alongside high selectivity and robust anti-interference capability. The developed sensor was successfully applied to detect rutin in real samples with recovery rates from 96.8% to 98.5%.

  • Solution-processed molybdenum oxide hole-transporting layer regulated by Ti3C2Tx MXene for efficient organic solar cells

    by Yinhui Bao, Zan Ding, Xing Chen, Xudong Zhang, Weiwei Wu, Chen Su, Chao Gao, Huanran Feng

  • Open Access

    Molecular Imprinting Ratiometric Fluorescence Sensor for Visual and Sensitive Detection of Tetrabromobisphenol A

    by Yanming Shao, Xuan Rong, Peng Wang, Huanhuan Zhao, Huanran Feng, Wenli Ma, Wenli Peng, Guohao Gao, Xianyu Yang, Ziwei Jiao

    A molecularly imprinted polymer (MIP) ratiometric fluorescence sensor was prepared for visual and sensitive detection of tetrabromobisphenol A (TBBPA). The sensor was prepared by simply mixing silica-coated blue-fluorescent carbon quantum dots (CQDs@SiO2) as the reference signal and yellow-fluorescent molecularly imprinted polymer with embedded CdTe QDs (y-CdTe@MIP) as the responsive signal. The specific binding of TBBPA to the imprinted cavities of the MIP results in fluorescence quenching of the yellow CdTe QDs at 570 nm. In contrast, the blue fluorescence intensity of the silica-coated CQDs at 440 nm remains unchanged. The detection conditions were optimized and the performance of the ratiometric fluorescence sensor was evaluated through fluorescence experiments. Under optimal conditions, a good linear relationship was established between the fluorescence intensity ratio (I570/I440)0/(I570/I440) of the sensor and the concentration of TBBPA in the range of 0-15 µM, with a detection limit as low as 10.4 nM. Furthermore, a pronounced fluorescence color change from yellow to blue is visible to the naked eye, allowing for the visual detection of TBBPA. Moreover, the MIP sensor effectively detected TBBPA in water samples, with recoveries ranging from 97.47% to 102.17% and relative standard deviation (RSD) below 3.8%. The results demonstrate the potential of this ratiometric fluorescent sensor for detecting water pollutants.

  • Open Access

    Solution-Processed Molybdenum Oxide Hole-Transporting Layer Regulated by Ti3C2Tx Mxene for Efficient Organic Solar Cells

    by Yinhui Bao, Zan Ding, Xing Chen, Xudong Zhang, Weiwei Wu, Chen Su, Chao Gao, Huanran Feng

    Molybdenum oxide (MoOₓ), commonly adopted as an HTL material, offers potential for solution-based processing. Precise control over the oxidation state of molybdenum (Mo) within the HTL is crucial for achieving optimal OSC performance. In this study, we present an n-type doping strategy for MoOx by incorporating highly conductive Ti3C2Tx as an n-type dopant. The surface functional groups of Ti3C2Tx MXene mediate an auxiliary reduction process, selectively converting a fraction of Mo(VI) to Mo(V) and thereby yielding n-doped MoOₓ. Leveraging the intrinsic high electrical conductivity of Ti3C2Tx MXene, the resulting Ti3C2Tx-MoOx composite exhibits markedly enhanced conductivity relative to pristine MoOx, ultimately enabling the fabrication of high-performance OSCs with robust interfacial stability. Devices featuring the optimized Ti3C2Tx-MoOx composite HTL achieve a champion power conversion efficiency (PCE) of 17.44%, outperforming control devices based on PEDOT:PSS (16.36%) or pristine MoOx (16.48%). The versatility of this composite HTL is further demonstrated by its effectiveness in boosting the PCE of OSCs based on both PM6:Py-DT and PBDB-T:ITIC active layers. This work represents a step toward mitigating the longstanding conductivity-processability trade-off in inorganic HTLs, offering a promising material design strategy to support the development of high-performance and stable OSCs.

  • Molecularly Imprinted Electrochemical Sensor Based on Magnetic Mesoporous Nanocarriers for Sensitive Detection of Tetrabromobisphenol A

    by Yanming Shao, Mengyi Kang, Huanran Feng, Caifeng Hao, Xuan Rong, Huanhuan Zhao, Wenli Ma, Wenli Peng, Yunhe Li