Yongsheng Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yongsheng Wu has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Jinggang Qin
Chinese Academy of Science
9 shared publications - Chao Zhou
Chinese Academy of Science
4 shared publications - Fang Liu
Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences
3 shared publications - Houxiang Han
Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China
3 shared publications - Huan Jin
Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, China
3 shared publications - Libiao Hu
Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences
3 shared publications
Latest Publications
- 21 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 4801806
Numerical Simulation Study on the Influence of Rutherford Cable With Parallel Winding on the Accuracy and Uniformity of Magnetic Field
Rutherford cables are commonly used in ultra-high field Magnetic Resonance Imaging (MRI) magnet systems. In order to solve the problem of whether the toroidal Rutherford cable twist affects the accuracy and uniformity of magnetic field, the parameter equation of the toroidal Rutherford cable is constructed, and the calculation formula of the magnetic field of the toroidal Rutherford cable is derived. The magnetic field calculation results are verified by OPERA software. Secondly, the single-turn Rutherford cable coil model and parallel circular coil model are constructed, and the harmonic components of each order are obtained by left deconvolution method, and the harmonic and field diagram characteristics of the two are compared. The results show that the accuracy of the calculation method meets the application requirements, and the influence of strand transposition in Rutherford cables on the magnetic field uniformity is in the acceptable range. The research results provide a theoretical basis for investigating the uniformity loss caused by the three-dimensional structure deviation of superconducting coils.
- 21 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 4801806
Numerical Simulation Study on the Influence of Rutherford Cable With Parallel Winding on the Accuracy and Uniformity of Magnetic Field
Rutherford cables are commonly used in ultra-high field Magnetic Resonance Imaging (MRI) magnet systems. In order to solve the problem of whether the toroidal Rutherford cable twist affects the accuracy and uniformity of magnetic field, the parameter equation of the toroidal Rutherford cable is constructed, and the calculation formula of the magnetic field of the toroidal Rutherford cable is derived. The magnetic field calculation results are verified by OPERA software. Secondly, the single-turn Rutherford cable coil model and parallel circular coil model are constructed, and the harmonic components of each order are obtained by left deconvolution method, and the harmonic and field diagram characteristics of the two are compared. The results show that the accuracy of the calculation method meets the application requirements, and the influence of strand transposition in Rutherford cables on the magnetic field uniformity is in the acceptable range. The research results provide a theoretical basis for investigating the uniformity loss caused by the three-dimensional structure deviation of superconducting coils.
- 27 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
The Electromagnetic Calculation and Mechanical Evaluation of CFETR CSMC Under Transient Extreme Operation
As a crucial part of the Central Solenoid Model Coil (CSMC), the preload system is crucial to maintain the integrity of the coil modules and to prevent their offset and misalignment after energization. The purpose of this study is to ascertain the safety and dependability of the preload system components when subjected to extreme alternating currents, through a comprehensive analysis of electromagnetic-structural coupling and an assessment of stress levels. Initially, an eddy current calculation model for the preload system of the CSMC was established using ANSYS Maxwell, and the eddy current, magnetic density, and electromagnetic force density for the preload system were calculated, when subjected to alternating excitation current. Subsequently, an indirect coupling technique was utilized to examine the mechanical behaviour of the preload system, considering the combined effects of extreme electromagnetic loads and preload. Ultimately, the stress levels of the preload system were evaluated using stress linearization, with reference to analytical design principles. After stress assessment, it was found that all types of primary stresses in the preload components were below the corresponding stress thresholds, with sufficient safety margins. This study provides theoretical guidance for the energized testing of the CSMC and serves as an important theoretical basis for further optimizing the preload components.
- 27 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
The Electromagnetic Calculation and Mechanical Evaluation of CFETR CSMC Under Transient Extreme Operation
As a crucial part of the Central Solenoid Model Coil (CSMC), the preload system is crucial to maintain the integrity of the coil modules and to prevent their offset and misalignment after energization. The purpose of this study is to ascertain the safety and dependability of the preload system components when subjected to extreme alternating currents, through a comprehensive analysis of electromagnetic-structural coupling and an assessment of stress levels. Initially, an eddy current calculation model for the preload system of the CSMC was established using ANSYS Maxwell, and the eddy current, magnetic density, and electromagnetic force density for the preload system were calculated, when subjected to alternating excitation current. Subsequently, an indirect coupling technique was utilized to examine the mechanical behaviour of the preload system, considering the combined effects of extreme electromagnetic loads and preload. Ultimately, the stress levels of the preload system were evaluated using stress linearization, with reference to analytical design principles. After stress assessment, it was found that all types of primary stresses in the preload components were below the corresponding stress thresholds, with sufficient safety margins. This study provides theoretical guidance for the energized testing of the CSMC and serves as an important theoretical basis for further optimizing the preload components.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Quench Analysis of the Hybrid CS Magnet in the Next-Generation Fusion Device
The use of High-Temperature Superconducting (HTS) technology in a fusion Central Solenoid (CS) magnet enables a significant enhancement in the inductive flux driving the plasma, achieved by increasing the magnetic field strength. This approach has garnered significant attention, leading Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) to join the research effort in designing and manufacturing a hybrid CS magnet that combines HTS and Low-Temperature Superconducting (LTS) coils. There is considerable mutual inductance between HTS and LTS coils, and their coupling can substantially affect the electromagnetic, mechanical, and thermal properties of hybrid CS magnet. Particularly, the quench of one or several coils can cause fluctuations in the performance parameters of the remaining coils, which is a critical issue in hybrid magnets that warrants further investigation. This paper analyzes and discusses the variations in electrical, magnetic, mechanical, and thermal parameters of the hybrid magnet following a quenching event, and offers reference insights for the design of such magnets from a stability-oriented perspective.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-6
Quench Analysis of the Hybrid CS Magnet in the Next-Generation Fusion Device
The use of High-Temperature Superconducting (HTS) technology in a fusion Central Solenoid (CS) magnet enables a significant enhancement in the inductive flux driving the plasma, achieved by increasing the magnetic field strength. This approach has garnered significant attention, leading Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) to join the research effort in designing and manufacturing a hybrid CS magnet that combines HTS and Low-Temperature Superconducting (LTS) coils. There is considerable mutual inductance between HTS and LTS coils, and their coupling can substantially affect the electromagnetic, mechanical, and thermal properties of hybrid CS magnet. Particularly, the quench of one or several coils can cause fluctuations in the performance parameters of the remaining coils, which is a critical issue in hybrid magnets that warrants further investigation. This paper analyzes and discusses the variations in electrical, magnetic, mechanical, and thermal parameters of the hybrid magnet following a quenching event, and offers reference insights for the design of such magnets from a stability-oriented perspective.
- 14 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (6) , 1-5
Research on ZnO Varistor for Superconducting Magnet Quench Protection
Quench protection is a major subject for superconducting magnets, which operate at high current densities with high stored energy. Large amounts of energy should be removed to protect magnets. Due to its nonlinear properties, the zinc oxide (ZnO) varistor shows strong advantages compared to the constant resistance. In this work, the characteristics and its superiority over the constant resistance are demonstrated. First, the changes of current and voltage are analyzed during the discharge process. We find that the discharge time are shortened and the efficiency are increased in case of ZnO. Second, we report the experimental setup, including the rare earth (RE) Ba2Cu3O7-x (REBCO) magnet, energy transfer elements, and the corresponding test platform. The experimental results show that the constant voltage demagnetization can be realized. This is consistent with the presented theoretical analysis.
- 14 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (6) , 1-5
Research on ZnO Varistor for Superconducting Magnet Quench Protection
Quench protection is a major subject for superconducting magnets, which operate at high current densities with high stored energy. Large amounts of energy should be removed to protect magnets. Due to its nonlinear properties, the zinc oxide (ZnO) varistor shows strong advantages compared to the constant resistance. In this work, the characteristics and its superiority over the constant resistance are demonstrated. First, the changes of current and voltage are analyzed during the discharge process. We find that the discharge time are shortened and the efficiency are increased in case of ZnO. Second, we report the experimental setup, including the rare earth (RE) Ba2Cu3O7-x (REBCO) magnet, energy transfer elements, and the corresponding test platform. The experimental results show that the constant voltage demagnetization can be realized. This is consistent with the presented theoretical analysis.
- Open Access
- 7 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (9) , 5201
The Development and Challenge of the CHSN01 Jacket for the CS Magnet in China’s Future Fusion Device
The Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) is currently engaged in the design of a compact fusion device with a fusion power gain (Q) exceeding one. Due to space limitation for the device, the conductor jacket of the central solenoid (CS) magnet experiences significant electromagnetic stress. Therefore, a higher strength stainless steel known as modified N50 (CHSN01) is utilized for manufacturing the jacket. To effectively heat the plasma, the CS magnet within the device requires operation with alternating current. It is crucial to monitor fatigue crack growth caused by stress cycles in the CS jacket and assess its severity in order to ensure the safety and reliability of the fusion device. In this study, a finite element method is applied to establish a functional relationship between the stress intensity factor range ∆K and the jacket defect depth a precisely based on actual cyclic loads experienced by CS magnet operation. Experimental investigations are conducted to determine fatigue crack growth rates (FCGRs) at 4.2 Kelvin (K) for the CHSN01 jacket. The maximum likelihood estimation method is employed to calculate the probability equations of FCGRs with a random variable description. Consequently, it is possible to determine the maximum allowable initial defect size for a jacket to withstand 60,000 plasma pulses, which will serve as an input parameter for non-destructive testing of jackets.
- 7 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (9) , 5201
Open AccessThe Development and Challenge of the CHSN01 Jacket for the CS Magnet in China’s Future Fusion Device
The Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) is currently engaged in the design of a compact fusion device with a fusion power gain (Q) exceeding one. Due to space limitation for the device, the conductor jacket of the central solenoid (CS) magnet experiences significant electromagnetic stress. Therefore, a higher strength stainless steel known as modified N50 (CHSN01) is utilized for manufacturing the jacket. To effectively heat the plasma, the CS magnet within the device requires operation with alternating current. It is crucial to monitor fatigue crack growth caused by stress cycles in the CS jacket and assess its severity in order to ensure the safety and reliability of the fusion device. In this study, a finite element method is applied to establish a functional relationship between the stress intensity factor range ∆K and the jacket defect depth a precisely based on actual cyclic loads experienced by CS magnet operation. Experimental investigations are conducted to determine fatigue crack growth rates (FCGRs) at 4.2 Kelvin (K) for the CHSN01 jacket. The maximum likelihood estimation method is employed to calculate the probability equations of FCGRs with a random variable description. Consequently, it is possible to determine the maximum allowable initial defect size for a jacket to withstand 60,000 plasma pulses, which will serve as an input parameter for non-destructive testing of jackets.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (3) , 1-6
Misaligned Analysis of the 15 T Magnet in Super-X Facility
The Super-X facility for testing large size superconducting conductors is making significant progress. However, the magnetic force between two coils arises when the centers of their respective magnetic fields do not coincide. Coil misalignment is nearly unavoidable during the installation of magnets which will lead to this eccentric force. In particular, for suspended background magnet in Super-X facility, the eccentric force amplifies the stress on structural components, thereby potentially compromising the magnet's safe operation. Therefore, it is imperative to evaluate its impact on the structural components of the magnet. The pull rope structure of the background magnet is elaborated upon in this article, followed by the analysis of the electromagnetic force generated under different eccentricities of the magnet. Subsequently, the stresses on the structural components of the magnet with and without the pull rope structure are analyzed separately. The results demonstrate that the presence of a pull rope structure is crucial for withstanding magnet eccentricity. Thus far, it can be concluded that the mechanical performance of the magnet still meets the design requirements, taking into account coil misalignment.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (3) , 1-6
Misaligned Analysis of the 15 T Magnet in Super-X Facility
The Super-X facility for testing large size superconducting conductors is making significant progress. However, the magnetic force between two coils arises when the centers of their respective magnetic fields do not coincide. Coil misalignment is nearly unavoidable during the installation of magnets which will lead to this eccentric force. In particular, for suspended background magnet in Super-X facility, the eccentric force amplifies the stress on structural components, thereby potentially compromising the magnet's safe operation. Therefore, it is imperative to evaluate its impact on the structural components of the magnet. The pull rope structure of the background magnet is elaborated upon in this article, followed by the analysis of the electromagnetic force generated under different eccentricities of the magnet. Subsequently, the stresses on the structural components of the magnet with and without the pull rope structure are analyzed separately. The results demonstrate that the presence of a pull rope structure is crucial for withstanding magnet eccentricity. Thus far, it can be concluded that the mechanical performance of the magnet still meets the design requirements, taking into account coil misalignment.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (6) , 1-6
Thermomechanical Analysis of the Structure Components of 15 T Magnet in Super-X Facility
As a sub-task of the comprehensive research facility for fusion technology (CRAFT), the superconducting conductor experiment testing platform (Super-X for short) can evaluate the performance of future superconducting conductors with large section dimension under fusion reactor operating conditions. The direct current magnet providing the background magnetic field 15 T is a crucial component of the Super-X facility. In this paper, the final design of the background magnet is described firstly. Its innovative preload structure is adopted to solve the problem of limited space. The length of the titanium (Ti) alloy boom used to hang the magnet is about 6 m, which can effectively reduce the heat leak. Next, a finite element model of the background magnet containing the structure component is established. Then, electromagnetic analysis is conducted to obtain the magnetic field distributions and Lorentz loads. Finally, 3D global mechanical analysis is performed, and the detailed mechanical robustness of the background magnet is illustrated and discussed. The analytical results indicate that the present background magnet design satisfies mechanical criteria.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (6) , 1-6
Thermomechanical Analysis of the Structure Components of 15 T Magnet in Super-X Facility
As a sub-task of the comprehensive research facility for fusion technology (CRAFT), the superconducting conductor experiment testing platform (Super-X for short) can evaluate the performance of future superconducting conductors with large section dimension under fusion reactor operating conditions. The direct current magnet providing the background magnetic field 15 T is a crucial component of the Super-X facility. In this paper, the final design of the background magnet is described firstly. Its innovative preload structure is adopted to solve the problem of limited space. The length of the titanium (Ti) alloy boom used to hang the magnet is about 6 m, which can effectively reduce the heat leak. Next, a finite element model of the background magnet containing the structure component is established. Then, electromagnetic analysis is conducted to obtain the magnetic field distributions and Lorentz loads. Finally, 3D global mechanical analysis is performed, and the detailed mechanical robustness of the background magnet is illustrated and discussed. The analytical results indicate that the present background magnet design satisfies mechanical criteria.
- 19 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Research on the Evolution Characteristics of REBCO Inductance for 19 T All-Superconducting Magnet
Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) has been focusing on high-field all-superconducting user magnet for many years. The 19 T all superconducting magnet for material testing facility consists of a 14 T/ Φ150 mm low temperature superconductor (LTS) background magnet and a 5 T insert coil made by double pancake (DP) coils wound with insulated rare-earth-barium-copper-oxide (REBCO) coated conductor. Currently, it has been found that the inductance of REBCO magnet evolves with current. As an important parameter, the inductance is related to the energy storage and the quench analysis. This study analyzes the equivalent relative permeability μr(H) , which is brought into analyzing the magnetic field distribution to get inductance . Additionally, we developed a tested magnet and a pulsed discharge experimental platform. The results are in consistent with theoretical analysis, which shows a positive correlation between inductance and current.
- 19 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Research on the Evolution Characteristics of REBCO Inductance for 19 T All-Superconducting Magnet
Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) has been focusing on high-field all-superconducting user magnet for many years. The 19 T all superconducting magnet for material testing facility consists of a 14 T/ Φ150 mm low temperature superconductor (LTS) background magnet and a 5 T insert coil made by double pancake (DP) coils wound with insulated rare-earth-barium-copper-oxide (REBCO) coated conductor. Currently, it has been found that the inductance of REBCO magnet evolves with current. As an important parameter, the inductance is related to the energy storage and the quench analysis. This study analyzes the equivalent relative permeability μr(H) , which is brought into analyzing the magnetic field distribution to get inductance . Additionally, we developed a tested magnet and a pulsed discharge experimental platform. The results are in consistent with theoretical analysis, which shows a positive correlation between inductance and current.
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Mechanical Analysis of CORC CICC for Future Fusion CS Magnet
With continuous improvements in the superconducting performance and technical maturity, High Temperature Superconductors (HTS) are believed to meet the challenges of future fusion magnets. The Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) has been designing several types of high current REBCO Conductor On Round Core (CORC) Cable-In-Conduit Conductors (CICCs) for use in Central Solenoid (CS) magnet of a next-generation tokamak device. One preferred structure of CICC consists of six CORC sub-cables embedded in the spiral grooves of a copper structural part. This CICC, rated for 45 kA at 4.2 K and 20 T, is subjected to great electromagnetic forces. Compared with stainless steel, copper has better thermal conductivity but poorer mechanical performance. Therefore, the mechanical robustness of conductor in low temperature and electromagnetic environment needs to be evaluated. In this paper, the mechanical analyses of this conductor is performed by Finite Element Method (FEM), and the effect of pitch on conductor stress is analyzed. These results will provide mechanical information for selecting the relatively suitable conductor scheme.
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Mechanical Analysis of CORC CICC for Future Fusion CS Magnet
With continuous improvements in the superconducting performance and technical maturity, High Temperature Superconductors (HTS) are believed to meet the challenges of future fusion magnets. The Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) has been designing several types of high current REBCO Conductor On Round Core (CORC) Cable-In-Conduit Conductors (CICCs) for use in Central Solenoid (CS) magnet of a next-generation tokamak device. One preferred structure of CICC consists of six CORC sub-cables embedded in the spiral grooves of a copper structural part. This CICC, rated for 45 kA at 4.2 K and 20 T, is subjected to great electromagnetic forces. Compared with stainless steel, copper has better thermal conductivity but poorer mechanical performance. Therefore, the mechanical robustness of conductor in low temperature and electromagnetic environment needs to be evaluated. In this paper, the mechanical analyses of this conductor is performed by Finite Element Method (FEM), and the effect of pitch on conductor stress is analyzed. These results will provide mechanical information for selecting the relatively suitable conductor scheme.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Analysis of Temperature Uniformity During Heat Treatment of Nb3Sn Coils for DC Magnet in Super-X Test Facility
The Comprehensive Research Facility for Fusion Technology (CRAFT) serves as a pivotal pilot research project of the China Fusion Engineering Test Reactor (CFETR). The superconducting conductor experiment testing platform (Super-X) is a part of CRAFT to assess the performance of future superconducting components. The Direct Current (dc) magnet generates the background field in the Super-X facility. A “wind and react” process is employed in the fabrication of Nb 3 Sn coils for dc magnet. We designed and constructed a circulating atmosphere heat treatment system for the completion of Nb 3 Sn coil heat treatment. Given the significant influence of heat treatment temperature, particularly in terms of temperature uniformity, on the critical properties of Nb 3 Sn, it is imperative to analyze the temporal evolution of temperatures within Nb 3 Sn coils during the heat treatment process. In this study, the coil temperature field distribution during heat treatment process has been analyzed using finite element method. Additionally, thermocouples are placed on coil's surface to monitor temperature changes during heat treatment. Both simulation results and experimental data demonstrate that the uniformity of heat treatment temperature satisfies technical requirements.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Analysis of Temperature Uniformity During Heat Treatment of Nb3Sn Coils for DC Magnet in Super-X Test Facility
The Comprehensive Research Facility for Fusion Technology (CRAFT) serves as a pivotal pilot research project of the China Fusion Engineering Test Reactor (CFETR). The superconducting conductor experiment testing platform (Super-X) is a part of CRAFT to assess the performance of future superconducting components. The Direct Current (dc) magnet generates the background field in the Super-X facility. A “wind and react” process is employed in the fabrication of Nb 3 Sn coils for dc magnet. We designed and constructed a circulating atmosphere heat treatment system for the completion of Nb 3 Sn coil heat treatment. Given the significant influence of heat treatment temperature, particularly in terms of temperature uniformity, on the critical properties of Nb 3 Sn, it is imperative to analyze the temporal evolution of temperatures within Nb 3 Sn coils during the heat treatment process. In this study, the coil temperature field distribution during heat treatment process has been analyzed using finite element method. Additionally, thermocouples are placed on coil's surface to monitor temperature changes during heat treatment. Both simulation results and experimental data demonstrate that the uniformity of heat treatment temperature satisfies technical requirements.