Kausturi Parui
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kausturi Parui has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Megan Marie Butala
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA
5 shared publications - Ani. N. Davis
Department of Chemistry Butler Polymer Research Laboratory Center For Macromolecular Science & Engineering University of Florida Gainesville Florida USA
3 shared publications - Austin M. Evans
University of Florida
3 shared publications - A. M. Mahmudul Hasan
George and Josephine Butler Polymer Laboratory Department of Chemistry University of Florida Gainesville Florida USA
2 shared publications - John D. Langhout
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA
2 shared publications - Kiana A. Treaster
Department of Chemistry Butler Polymer Research Laboratory Center For Macromolecular Science & Engineering University of Florida Gainesville Florida USA
2 shared publications
Latest Publications
- Open Access
- 13 August 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70364
Polymers of Intrinsic Microporosity as Organic Cathodes for Fast‐Charging Lithium‐Ion Batteries
Developing fast‐charging electrodes requires understanding how polymer architecture governs ion‐transport, redox‐site accessibility, and charge‐storage mechanism. While porosity improves electrochemical performance, its role at fast‐charging conditions remains unclear. We investigate the effects of porosity by comparing polymers with a naphthalene diimide (NDI) redox‐active unit and two contorted monomers (triptycene‐like [tryp] and spirobisindane [spiro]) to a nonporous model system (NDI‐model). In galvanostatic cycling, NDI‐model exhibits low accessible capacity even at slow rates (25.8 mAh g −1 at C/10), indicating limited ion transport, related to its low surface area (35 m 2 g −1 ). NDI‐spiro exhibits a superior performance, retaining 74% of its C/10 capacity at 20C. Cyclic voltammetry reveals a surface‐controlled charge‐storage mechanism for NDI‐spiro, attributed to its higher surface area (273 m 2 g −1 ), which allows greater accessibility of redox sites. In contrast, NDI‐tryp achieves high capacity at slow rates (50.4 mAh g −1 at C/10), but suffers from diffusion limitations and poor rate capability, related with its diffusion‐controlled charge‐storage mechanism. Extending this study to spiro‐based polymers with other redox active units, perylene diimide (PDI) and benzenediimide (BDI), shows that redox‐unit identity affects kinetics and rate capability, shifting the charge‐storage mechanism from surface‐controlled to a diffusion‐controlled. These findings establish structure–property relationships for designing high‐performance fast‐charging organic battery electrodes.
- 13 August 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70364
Open AccessPolymers of Intrinsic Microporosity as Organic Cathodes for Fast‐Charging Lithium‐Ion Batteries
Developing fast‐charging electrodes requires understanding how polymer architecture governs ion‐transport, redox‐site accessibility, and charge‐storage mechanism. While porosity improves electrochemical performance, its role at fast‐charging conditions remains unclear. We investigate the effects of porosity by comparing polymers with a naphthalene diimide (NDI) redox‐active unit and two contorted monomers (triptycene‐like [tryp] and spirobisindane [spiro]) to a nonporous model system (NDI‐model). In galvanostatic cycling, NDI‐model exhibits low accessible capacity even at slow rates (25.8 mAh g −1 at C/10), indicating limited ion transport, related to its low surface area (35 m 2 g −1 ). NDI‐spiro exhibits a superior performance, retaining 74% of its C/10 capacity at 20C. Cyclic voltammetry reveals a surface‐controlled charge‐storage mechanism for NDI‐spiro, attributed to its higher surface area (273 m 2 g −1 ), which allows greater accessibility of redox sites. In contrast, NDI‐tryp achieves high capacity at slow rates (50.4 mAh g −1 at C/10), but suffers from diffusion limitations and poor rate capability, related with its diffusion‐controlled charge‐storage mechanism. Extending this study to spiro‐based polymers with other redox active units, perylene diimide (PDI) and benzenediimide (BDI), shows that redox‐unit identity affects kinetics and rate capability, shifting the charge‐storage mechanism from surface‐controlled to a diffusion‐controlled. These findings establish structure–property relationships for designing high‐performance fast‐charging organic battery electrodes.
- Open Access
- 1 April 2025
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 8 (2) , 025017
Mo-substitution in V2O5 tunes the structure towards three-dimensional connectivity and improves Li-ion battery cycling
The development of alternative energy sources is crucial for reducing reliance on fossil fuels, particularly for mobile applications such as personal electronics and transportation. This necessitates the advancement of battery materials based on abundant and inexpensive constituent elements. To achieve this requires investigating materials in a broader compositional and structural design space. Early transition metal oxides, including the intercalation electrode α − V2O5, however, the performance of V2O5 is hindered by phase transformations during battery cycling that lead to capacity fade and short device lifetimes. This study investigates the modification of V2O5 through Mo substitution in a series of the form V 2 − x Mo x O5 for x = 0.05, 0.1, 0.2, 0.4, 0.6, and 0.8. X-ray diffraction data reveal progressive structural changes with increasing Mo content, which in turn change the progression of phase transformations during the first discharge. The different product also results in different cycling profile shapes that indicate differences in the charge storage mechanism as a function of Mo content. As a result, samples with higher Mo-substitution, especially V1.2Mo0.8O5, have narrower hysteresis, higher capacity, and improved capacity retention. While there is a limited solubility of Mo in the V2O5 structure, with secondary phases and defects at many compositions, we show that Mo substitution alters the cycling behavior of V2O5 to deep discharge, which can inform the design of intercalation materials for energy storage applications.
- 1 April 2025
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 8 (2) , 025017
Open AccessMo-substitution in V2O5 tunes the structure towards three-dimensional connectivity and improves Li-ion battery cycling
The development of alternative energy sources is crucial for reducing reliance on fossil fuels, particularly for mobile applications such as personal electronics and transportation. This necessitates the advancement of battery materials based on abundant and inexpensive constituent elements. To achieve this requires investigating materials in a broader compositional and structural design space. Early transition metal oxides, including the intercalation electrode α − V2O5, however, the performance of V2O5 is hindered by phase transformations during battery cycling that lead to capacity fade and short device lifetimes. This study investigates the modification of V2O5 through Mo substitution in a series of the form V 2 − x Mo x O5 for x = 0.05, 0.1, 0.2, 0.4, 0.6, and 0.8. X-ray diffraction data reveal progressive structural changes with increasing Mo content, which in turn change the progression of phase transformations during the first discharge. The different product also results in different cycling profile shapes that indicate differences in the charge storage mechanism as a function of Mo content. As a result, samples with higher Mo-substitution, especially V1.2Mo0.8O5, have narrower hysteresis, higher capacity, and improved capacity retention. While there is a limited solubility of Mo in the V2O5 structure, with secondary phases and defects at many compositions, we show that Mo substitution alters the cycling behavior of V2O5 to deep discharge, which can inform the design of intercalation materials for energy storage applications.
- 23 September 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (42) , 28874-28881
Cross-linking organic cathodes enhances stability at the expense of ionic accessibility
We have investigated the fundamental impacts of network cross-linking density on organic cathode performance. Current battery technologies rely on transition metal oxide cathodes that suffer from significant availability, cost, environmental, and humanitarian drawbacks. This reality has inspired the exploration of organic cathode materials that host high theoretical capacities, are environmentally friendly, and are tunable by molecular design. These desirable features are typically accompanied by undesirable instability during battery cycling due to solubility in electrolyte, leading to diminished capacities. Cross-linking polymer electrodes presents one strategy to address dissolution challenges. Here, we synthesized variably cross-linked naphthalene diimide (NDI)-based networks to systematically study the effect of cross-linking density on organic electrode battery performance. NDI-networks were cast as composite electrodes, manufactured into coin cells with lithium metal anodes, and evaluated by galvanostatic cycling. We observed that increased cross-linking facilitated reversible redox-access to NDI units in the network, which correlated to increased stability and capacities. Cathodes with optimized cross-linking host an initial capacity of 106 mA h g−1 and >75% capacity retention after 100 cycles with a C/10 rate. This contrasts with uncross-linked materials, which rapidly diminished in performance due to dissolution in the electrolyte, and more densely cross-linked materials, which suffered from limited ionic accessibility. These findings demonstrate that (1) cross-linking can improve organic electrode performance and (2) there are tradeoffs between cycling stability, capacity, and overall energy storage performance with cross-linking density. Future investigations will explore how network design and processing conditions can be leveraged to co-optimize organic cathode performance across these important metrics.
- 23 September 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (42) , 28874-28881
Cross-linking organic cathodes enhances stability at the expense of ionic accessibility
We have investigated the fundamental impacts of network cross-linking density on organic cathode performance. Current battery technologies rely on transition metal oxide cathodes that suffer from significant availability, cost, environmental, and humanitarian drawbacks. This reality has inspired the exploration of organic cathode materials that host high theoretical capacities, are environmentally friendly, and are tunable by molecular design. These desirable features are typically accompanied by undesirable instability during battery cycling due to solubility in electrolyte, leading to diminished capacities. Cross-linking polymer electrodes presents one strategy to address dissolution challenges. Here, we synthesized variably cross-linked naphthalene diimide (NDI)-based networks to systematically study the effect of cross-linking density on organic electrode battery performance. NDI-networks were cast as composite electrodes, manufactured into coin cells with lithium metal anodes, and evaluated by galvanostatic cycling. We observed that increased cross-linking facilitated reversible redox-access to NDI units in the network, which correlated to increased stability and capacities. Cathodes with optimized cross-linking host an initial capacity of 106 mA h g−1 and >75% capacity retention after 100 cycles with a C/10 rate. This contrasts with uncross-linked materials, which rapidly diminished in performance due to dissolution in the electrolyte, and more densely cross-linked materials, which suffered from limited ionic accessibility. These findings demonstrate that (1) cross-linking can improve organic electrode performance and (2) there are tradeoffs between cycling stability, capacity, and overall energy storage performance with cross-linking density. Future investigations will explore how network design and processing conditions can be leveraged to co-optimize organic cathode performance across these important metrics.
- Open Access
- 15 April 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (21) , 10142-10154
Supramolecular design as a route to high-performing organic electrodes
Supramolecular design principles are emerging as a powerful tool to manipulate organic cathode performance. In this review, we discuss how supramolecular interactions influence electrode behavior.
- 15 April 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (21) , 10142-10154
Open AccessSupramolecular design as a route to high-performing organic electrodes
Supramolecular design principles are emerging as a powerful tool to manipulate organic cathode performance. In this review, we discuss how supramolecular interactions influence electrode behavior.
- Open Access
- 10 February 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (11) , 5559-5567
R-Nb2O5 has an ‘idealized’ V2O5 structure and Wadsley–Roth-like structural stability during Li-ion battery cycling
R-Nb2O5 has minimal structure changes with cycling and symmetric cycling profiles. With Wadsley–Roth ‘slabs’ and an ‘idealized’ V2O5 structure, metastable R-Nb2O5 bridges understanding of two well-studied families of Li-ion battery electrodes.
- 10 February 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (11) , 5559-5567
Open AccessR-Nb2O5 has an ‘idealized’ V2O5 structure and Wadsley–Roth-like structural stability during Li-ion battery cycling
R-Nb2O5 has minimal structure changes with cycling and symmetric cycling profiles. With Wadsley–Roth ‘slabs’ and an ‘idealized’ V2O5 structure, metastable R-Nb2O5 bridges understanding of two well-studied families of Li-ion battery electrodes.