SPSuriya Prasomthong

Suriya Prasomthong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Suriya Prasomthong has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

    • 19 November 2026
    • Published by MDPI AG in Preprints.org
      • https://doi.org/10.20944/preprints202611.1964.v1
    Open Access

    Quadratic Response-Surface Analysis of Tensile Strength and Vickers Hardness in Robotic ER5356 Wire Arc Additive Manufacturing

    by Premchai Moolla, Sittichai Charonerat, Phanuwat Thosa, Suriya Prasomthong, Umphisak Teeboonma, Phattharapong Keidlaphi

    This study evaluates the effects of welding current, welding speed, and wire feed speed on the tensile strength (TS) and Vickers hardness (HV0.1) of ER5356 aluminum walls fabricated by robotic wire arc additive manufacturing (WAAM). A face-centered central composite design comprising 19 runs, including five centerpoint runs, was used over ranges of 90–100 A, 3–5 mm/s, and 4–6 m/min. Separate quadratic response-surface models were fitted to the two responses using ordi-nary least squares. The TS model was statistically significant (R² = 0.914, adjusted R² = 0.828; F(9, 9) = 10.64, p = 0.00082), with a nonsignificant lack-of-fit test (p = 0.858). Welding current, wire feed speed, and the quadratic current term were significant at α = 0.05. The HV model was not statis-tically significant (R² = 0.297, adjusted R² = −0.407; F(9, 9) = 0.422, p = 0.893). Run 19 (95 A, 4 mm/s, and 5 m/min) produced the highest measured TS (271.6 MPa), whereas Run 8 (100 A, 5 mm/s, and 6 m/min) produced the highest measured HV (72.5). Cross-sectional imaging showed rounded dark-contrast features, while the examined fracture surfaces displayed dimples and tearing ridges in both selected conditions. The results support a quadratic description of TS within the tested design space, whereas the fitted quadratic model did not establish a significant relationship be-tween the tested factors and HV.

  • Open Access

    Multi-objective optimization of two-point incremental forming parameters for Ti-6Al-4V using taguchi approach

    by Sittichai Charonerat, Keaittipong Onbut, Suriya Prasomthong, Yodprem Pookamnerd, Panuwat Thosa

    This study explores the optimization of essential process parameters in two-point incremental forming (TPIF) of Ti-6Al-4V titanium alloy using the Taguchi design method, in conjunction with signal-to-noise (S/N) ratio analysis and ANOVA, to enhance formability and surface characteristics. As the need for lightweight, high-performance, and customizable titanium components continues to grow in the biomedical and aerospace sectors, TPIF has emerged as a promising manufacturing method, offering high flexibility, cost efficiency, and minimal tooling requirements compared to traditional forming techniques. The study focuses on two critical response variables: forming depth and surface hardness. An L9 orthogonal array was implemented to evaluate the influence of three key parameters: step down, tool diameter, and contour path width. Experimental results indicated that tool diameter most significantly affected surface hardness, while step down was the dominant factor influencing forming depth. The optimal combination 0.3 mm step down, 10 mm tool diameter, and 6 mm contour path width produced a maximum forming depth of 8.35 mm and a surface hardness of 357 HV. The findings demonstrate that statistical design of experiments can successfully guide parameter selection to improve product quality, reduce material thinning, and minimize surface defects. Moreover, the integrated method ensures consistency, repeatability, and sustainable use of resources, making TPIF highly suitable for low-volume, high-precision applications such as patient-specific cranial implants and aerospace structural brackets. The study provides valuable insights for researchers and manufacturers aiming to advance incremental sheet forming technologies for next-generation materials

  • Open Access

    Development of hybrid ANN-GA and RSM models for optimizing mechanical properties in SS400-SUS304 welds

    by Amornsak Mayai, Suriya Prasomthong, Yodprem Pookamnerd

    Dissimilar metal welding, such as joining SS400 and SUS304, presents significant challenges due to differences in metallurgical and thermal properties, often leading to internal stresses, cracking, and reduced joint durability. These disparities compromise mechanical performance, necessitating advanced optimization techniques. This study applies a hybrid optimization approach integrating Artificial Neural Networks (ANN), Genetic Algorithms (GA), and Response Surface Methodology (RSM) to optimize Gas Metal Arc Welding (GMAW) parameters for enhanced tensile strength and hardness. Experimental conditions involved welding currents of 80–120 A, speeds of 200–400 mm/min, and a shielding gas composition of 95 % argon and 5 % oxygen. The ANN-GA model demonstrated superior predictive accuracy, with RMSE values of 236.43 N for tensile strength and 2.27 HV for hardness. Maximum tensile strength and hardness of 16,302 N and 192.08 HV, respectively, were achieved at specific parameter combinations. The ANN-GA-optimized conditions of 107.10 A and 336.38 mm/min provided a balance between strength and hardness, significantly improving weld quality. RSM revealed interactions among welding parameters but exhibited lower predictive accuracy than ANN-GA. This study highlights the effectiveness of ANN-GA in capturing nonlinear welding relationships, offering a robust framework for optimizing welding processes. The optimized parameters enhance weld quality, reduce costs, and improve operational efficiency in industrial welding applications


  • Open Access

    Development of mechanical property prediction model and optimization for dissimilar aluminum alloy joints with the friction stir welding (FSW) process

    by Yodprem Pookamnerd, Panuwat Thosa, Sittichai Charonerat, Suriya Prasomthong

    Friction stir welding (FSW) is a solid-state joining process used to weld dissimilar aluminum alloys with varying material properties and compositions. Unlike traditional welding methods, FSW does not involve melting the materials being welded but instead uses a rotating tool to heat and stir the materials until they are in a plastic state. The process results in a welded joint with high strength, excellent ductility, and minimal distortion, making it a popular choice in various industries, including aerospace, automotive, and marine. AA6061-T6 (Mg-Si) and AA7075 (Al-Zn-Mg-Cu) aluminum alloys are one of the most popular grades of aluminum alloys used in current manufacturing industries, such as aerospace and automotive, joined by the Friction Stir Welding Process (FSW) technique. Taguchi orthogonal array (L9) experimental design was applied to reduce the number of insignificant factors in the process. First, the study determines three welding factors: rotation speed, travel speed, and pin eccentricity. Investigations found that travel speeds significantly on tensile strength (Ts) and elongation ( %El), but the rotational speed and tool eccentricity did not affect Ts and %El. Furthermore, considering the fabricated parameters on the hardness (HV) of the joint, it was found that all factors unaffected the HV of the joint zone at a 95 % confidence level. Next, examine the microstructure; Mg2Al3 and Al2O3 intermetallic compounds were found in the weld. Therefore, investigating the crystallite size found that welding significantly affects the crystallite size. Finally, consider the fracture surface, experimental condition A2B1C2 (optimal parameter), which is the parameter with the highest tensile strength having dimple fracture characteristics. On the other hand, the welding condition A1B3C3, the parameter with the lowest tensile strength, Small and fine dimple fracture with cleavage fracture. Because the material is highly ductile and can undergo large deformations before it is damaged. On the other hand, materials with low tensile strength exhibiting cleavage fracture indicate that the materials are brittle and can break easily under stress


  • Open Access

    Investigation of the optimal parameters for butt joints in a friction stir welding (FSW) process with dissimilar aluminium alloys

    by Komsak Harachai, Suriya Prasomthong

    Aluminum alloys are used in the modern automotive industry because they are lightweight. However, it is establised that conventional fusion welding processes affect weld performance. In this study, friction stir welding (FSW), also known as solid-state welding, was used to weld dissimilar aluminum alloys, AA6061-T6 and AA5083 plates. Response surface methodology based on Box-Behnken design (BBD) was used to investigate the appropriate process parameters. In this study, the effects of rotation speed (S), welding feed rate (f), and work angle (θ) were investigated. These three factors were examined at three levels over 17 experimental runs. The design was used to conduct experiments and develop mathematical regression models. Variance analysis was performed to examine the adequacy of the developed models. Finally, the effects of the process parameters on the mechanical properties of welded alloyes were investigated using mathematical models based on the macrostructure, microstructure, chemical composition, and fracture characteristics of the joints using SEM. The investigation found that the optimum welding parameters are a rotational speed of 777 rpm, welding speed of 44 mm min−1, and a work angle of 0.75°. Furthermore, the results confirm that the mathematical models and experiments are consistent.


  • Open Access

    Optimized parameter of dissimilar joining between Al6061-T6 and height-strength steel with friction stir spot welding process (FSSW)

    by Anuak Silachai, Suriya Prasomthong

    High-strength steel and aluminum alloys are used to manufacture modern vehicles. The objective was to reduce the weight and fuel consumption of the vehicles. In this study the optimum parameters for the friction stir spot welding (FSSW) process between Al6061-T6 aluminum alloy and HSS590 high-strength steel were determined. Response surface methodology based on central composite design (CCD) with three parameters, five levels, and 19 runs was used to conduct experiments and develop mathematical regression models. The three joint parameters were tool speed, welding feed, and dwell time. Analysis of variance was then performed to examine the adequacy of the developed models. Finally, the effects of the process parameters on the mechanical properties were investigated using mathematical models. In addition, the distribution of the chemical composition and fracture characteristics of the joints was examined using scanning electron microscopy (SEM). The investigation found that the optimum welding parameters were a tool speed of 1576 rpm, welding feed rate of 45 mm∙min-1, and dwell time of 10 s. Furthermore, the results confirmed that the mathematical models and experiments were consistent.