Serena Ducoli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Serena Ducoli has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Stefania Federici
Department of Mechanical and Industrial Engineering, University of Brescia, 25123 Brescia, Italy
5 shared publications - Laura Eleonora Depero
Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
4 shared publications - Aleksandra Tubić
Department of Chemistry, Biochemistry and Environmental Protection, Faculty of Sciences, University of Novi Sad, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia
2 shared publications - Annalisa Zacco
Chemistry for Technologies Laboratory, Department of Mechanical and Industrial Engineering, University of Brescia, Via Branze 38, 25123 Brescia, Italy
2 shared publications - Elza Bontempi
INSTM and Chemistry for Technologies Laboratory, Department of Mechanical and Industrial Engineering, University of Brescia, Via Branze, 38, Brescia, 25123, Italy
2 shared publications - Monika Rani
Department of Mechanical and Industrial Engineering, University of Brescia and INSTM Research Unit of Brescia, 25123 Brescia, Italy
2 shared publications
Latest Publications
- Open Access
- 10 October 2026
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 27 (20) , 8978
Microplastics and the Kidney: A Narrative Review of Human Evidence, Molecular Mechanisms of Cell Injury, and Future Directions
Microplastics (MPs) are widespread environmental contaminants, but their potential effects on kidney health remain poorly defined. As an organ continuously exposed to circulating particles and involved in their urinary elimination, the kidney may represent both a target of MP toxicity and a route of excretion. In this narrative review, we examine current evidence linking MPs to kidney injury, integrating experimental, mechanistic, and human data. Particular attention is given to the early events governing particle–cell interactions. After exposure, micro- and nanoplastics acquire an eco- and biomolecular corona that modifies their surface properties, cellular recognition, uptake, and biodistribution. Following internalization through phagocytic and endocytic pathways, particles may accumulate within endolysosomal compartments and interact with intracellular structures, disrupting cellular homeostasis. In renal cells, these events converge on mitochondrial dysfunction, reactive oxygen species generation, endoplasmic reticulum stress, inflammatory signaling, altered autophagy, and regulated cell death. Several interconnected pathways have been implicated, including Keap1–Nrf2/ARE and NF-κB signaling, MAPK and IRE1/XBP1-mediated stress responses, ACSL4–GPX4-related ferroptosis, and TGF-β1-related profibrotic signaling. Human studies have detected MPs in urine and kidney tissue and provide preliminary evidence linking MP burden with early markers of kidney damage, although current findings remain limited by small study populations and substantial methodological heterogeneity. Patients with chronic kidney disease, particularly those receiving dialysis, may represent a population of special interest because potentially altered renal handling may coexist with repeated exposure to polymer-based medical devices and dialysis fluids. Despite this potential relevance, data on MP exposure and accumulation in CKD and dialysis patients remain remarkably scarce. We finally discuss the limitations of current experimental models and analytical methods and the need for standardized biomonitoring, more environmentally relevant particles and exposure concentrations, and detection strategies capable of reaching the nanoscale, including artificial intelligence-assisted analysis. Overall, available evidence provides a mechanistic basis for MP-induced kidney injury, but its clinical relevance and contribution to human kidney disease remain to be established.
- 10 October 2026
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 27 (20) , 8978
Open AccessMicroplastics and the Kidney: A Narrative Review of Human Evidence, Molecular Mechanisms of Cell Injury, and Future Directions
Microplastics (MPs) are widespread environmental contaminants, but their potential effects on kidney health remain poorly defined. As an organ continuously exposed to circulating particles and involved in their urinary elimination, the kidney may represent both a target of MP toxicity and a route of excretion. In this narrative review, we examine current evidence linking MPs to kidney injury, integrating experimental, mechanistic, and human data. Particular attention is given to the early events governing particle–cell interactions. After exposure, micro- and nanoplastics acquire an eco- and biomolecular corona that modifies their surface properties, cellular recognition, uptake, and biodistribution. Following internalization through phagocytic and endocytic pathways, particles may accumulate within endolysosomal compartments and interact with intracellular structures, disrupting cellular homeostasis. In renal cells, these events converge on mitochondrial dysfunction, reactive oxygen species generation, endoplasmic reticulum stress, inflammatory signaling, altered autophagy, and regulated cell death. Several interconnected pathways have been implicated, including Keap1–Nrf2/ARE and NF-κB signaling, MAPK and IRE1/XBP1-mediated stress responses, ACSL4–GPX4-related ferroptosis, and TGF-β1-related profibrotic signaling. Human studies have detected MPs in urine and kidney tissue and provide preliminary evidence linking MP burden with early markers of kidney damage, although current findings remain limited by small study populations and substantial methodological heterogeneity. Patients with chronic kidney disease, particularly those receiving dialysis, may represent a population of special interest because potentially altered renal handling may coexist with repeated exposure to polymer-based medical devices and dialysis fluids. Despite this potential relevance, data on MP exposure and accumulation in CKD and dialysis patients remain remarkably scarce. We finally discuss the limitations of current experimental models and analytical methods and the need for standardized biomonitoring, more environmentally relevant particles and exposure concentrations, and detection strategies capable of reaching the nanoscale, including artificial intelligence-assisted analysis. Overall, available evidence provides a mechanistic basis for MP-induced kidney injury, but its clinical relevance and contribution to human kidney disease remain to be established.
- Open Access
- 9 March 2026
- Published by MDPI AG in Microplastics
- Vol. 5 (1) , 52
Effects of Ozonation and Anaerobic Digestion on the Physicochemical Properties of Low-Density Polyethylene, Polypropylene, and Polyamide 66 Microplastics
Microplastics (MPs) are a growing environmental concern due to their ubiquitous presence, especially in wastewater treatment plants (WWTPs), where they are transferred and accumulated in sludge and can be reintroduced into the environment through sludge reuse. The persistence of MPs highlights the need for effective and tailored treatment strategies to enhance their removal or management. This study investigates the effects and impacts of ozonation as a pretreatment method for sludge, followed by anaerobic digestion (AD), on low-density polyethylene (LDPE), polypropylene (PP), and polyamide 66 (PA(66)) MPs. Different ozone doses, ranging from 5 to 50 gO3/gMPs, were tested in both deionized water and synthetic sludge. The study evaluated MPs degradation through mass variation measurements, Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Carbonyl Index (CI) analysis. Results showed that ozonation induced chemical modifications in MPs, increasing CI values and leading to the formation of oxygen-containing functional groups, particularly carbonyls. FTIR analysis confirmed the development of new absorption peaks at 1716 cm−1 and 1710 cm−1 for LDPE and PP, respectively, while PA(66) exhibited a shift in its carbonyl peak from 1739 cm−1 to 1754 cm−1. DSC analysis revealed a reduction in crystallinity for all tested polymers, suggesting increased structural disorder. However, no significant MPs mass reduction was observed, and AD did not further enhance MPs degradation. These findings highlight ozonation as a promising strategy for modifying MPs surface chemistry and potentially increasing their environmental degradability.
- 9 March 2026
- Published by MDPI AG in Microplastics
- Vol. 5 (1) , 52
Open AccessEffects of Ozonation and Anaerobic Digestion on the Physicochemical Properties of Low-Density Polyethylene, Polypropylene, and Polyamide 66 Microplastics
Microplastics (MPs) are a growing environmental concern due to their ubiquitous presence, especially in wastewater treatment plants (WWTPs), where they are transferred and accumulated in sludge and can be reintroduced into the environment through sludge reuse. The persistence of MPs highlights the need for effective and tailored treatment strategies to enhance their removal or management. This study investigates the effects and impacts of ozonation as a pretreatment method for sludge, followed by anaerobic digestion (AD), on low-density polyethylene (LDPE), polypropylene (PP), and polyamide 66 (PA(66)) MPs. Different ozone doses, ranging from 5 to 50 gO3/gMPs, were tested in both deionized water and synthetic sludge. The study evaluated MPs degradation through mass variation measurements, Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Carbonyl Index (CI) analysis. Results showed that ozonation induced chemical modifications in MPs, increasing CI values and leading to the formation of oxygen-containing functional groups, particularly carbonyls. FTIR analysis confirmed the development of new absorption peaks at 1716 cm−1 and 1710 cm−1 for LDPE and PP, respectively, while PA(66) exhibited a shift in its carbonyl peak from 1739 cm−1 to 1754 cm−1. DSC analysis revealed a reduction in crystallinity for all tested polymers, suggesting increased structural disorder. However, no significant MPs mass reduction was observed, and AD did not further enhance MPs degradation. These findings highlight ozonation as a promising strategy for modifying MPs surface chemistry and potentially increasing their environmental degradability.
- Open Access
- 6 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Developing environmentally relevant test materials for microplastic research through UV-induced photoaging
Microplastics, defined as plastic fragments smaller than 5 mm, are pervasive pollutants which pose considerable ecological and health hazards owing to their durability and potential to cause adverse environmental effects. These particles originate mainly from the breakdown of bigger plastic debris by mechanisms such as UV-induced photodegradation, resulting in fragmentation into micro- and nanoplastics. Appropriate laboratory test materials that simulate naturally degraded plastics are essential for evaluating the environmental impact of microplastics, enhancing analytical methods, and assessing remediation pathways. In this study we generated "true-to-life" microplastics from commonly utilized plastic products through controlled photodegradation processes that replicate natural aging conditions. Two aging protocols were developed: the first consisted UV irradiation of macroplastic fragments for a duration of up to eight weeks, followed by cryogenic milling to generate microplastics; the second involved exposing pre-fragmented microplastics to UV light for the same duration. Five polymers, namely polystyrene (PS), polypropylene (PP), low-density polyethylene (LDPE), polyvinyl chloride (PVC), and polyethylene terephthalate (PET), were chosen for analysis, with PET investigated separately due to the presence of the carbonyl group, which complicates carbonyl index (CI) calculations used as a quantitative index to monitor the photo-oxidation. The surface morphology of aged microplastics was examined using Scanning Electron Microscopy (SEM), their chemical composition was investigated by near-Infrared (NIR) and Fourier-transform infrared (FTIR) spectroscopy, thermal properties were also evaluated by thermogravimetric analysis (TGA). PET degradation was further analyzed using supplementary techniques such as X-ray diffraction (XRD) and differential scanning calorimetry (DSC) to assess structural and thermal alterations. This study improves the environmental applicability of microplastic test materials, enabling more precise evaluations of microplastic behavior and degradation in real-world scenarios and providing significant insights into the possible long-term ecological impacts of microplastics.
- 6 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDeveloping environmentally relevant test materials for microplastic research through UV-induced photoaging
Microplastics, defined as plastic fragments smaller than 5 mm, are pervasive pollutants which pose considerable ecological and health hazards owing to their durability and potential to cause adverse environmental effects. These particles originate mainly from the breakdown of bigger plastic debris by mechanisms such as UV-induced photodegradation, resulting in fragmentation into micro- and nanoplastics. Appropriate laboratory test materials that simulate naturally degraded plastics are essential for evaluating the environmental impact of microplastics, enhancing analytical methods, and assessing remediation pathways. In this study we generated "true-to-life" microplastics from commonly utilized plastic products through controlled photodegradation processes that replicate natural aging conditions. Two aging protocols were developed: the first consisted UV irradiation of macroplastic fragments for a duration of up to eight weeks, followed by cryogenic milling to generate microplastics; the second involved exposing pre-fragmented microplastics to UV light for the same duration. Five polymers, namely polystyrene (PS), polypropylene (PP), low-density polyethylene (LDPE), polyvinyl chloride (PVC), and polyethylene terephthalate (PET), were chosen for analysis, with PET investigated separately due to the presence of the carbonyl group, which complicates carbonyl index (CI) calculations used as a quantitative index to monitor the photo-oxidation. The surface morphology of aged microplastics was examined using Scanning Electron Microscopy (SEM), their chemical composition was investigated by near-Infrared (NIR) and Fourier-transform infrared (FTIR) spectroscopy, thermal properties were also evaluated by thermogravimetric analysis (TGA). PET degradation was further analyzed using supplementary techniques such as X-ray diffraction (XRD) and differential scanning calorimetry (DSC) to assess structural and thermal alterations. This study improves the environmental applicability of microplastic test materials, enabling more precise evaluations of microplastic behavior and degradation in real-world scenarios and providing significant insights into the possible long-term ecological impacts of microplastics.
- 10 January 2025
- Published by Springer Nature in Environmental Chemistry Letters
- Vol. 23 (2) , 649-675
Production, characterization, and toxicology of environmentally relevant nanoplastics: a review
- 10 January 2025
- Published by Springer Nature in Environmental Chemistry Letters
- Vol. 23 (2) , 649-675
Production, characterization, and toxicology of environmentally relevant nanoplastics: a review
- Top Cited PapersOpen Access
A Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices
Sustainable development is a big global challenge for the 21st century. In recent years, a class of emerging contaminants known as microplastics (MPs) has been identified as a significant pollutant with the potential to harm ecosystems. These small plastic particles have been found in every compartment of the planet, with aquatic habitats serving as the ultimate sink. The challenge to extract MPs from different environmental matrices is a tangible and imperative issue. One of the primary specialties of research in environmental chemistry is the development of simple, rapid, low-cost, sensitive, and selective analytical methods for the extraction and identification of MPs in the environment. The present review describes the developments in MP extraction methods from complex environmental matrices. All existing methodologies (new, old, and proof-of-concept) are discussed and evaluated for their potential usefulness to extract MPs from various biotic and abiotic matrices for the sake of progress and innovation. This study concludes by addressing the current challenges and outlining future research objectives aimed at combating MP pollution. Additionally, a set of recommendations is provided to assist researchers in selecting appropriate analytical techniques for obtaining accurate results. To facilitate this process, a proposed roadmap for MP extraction is presented, considering the specific environmental compartments under investigation. By following this roadmap, researchers can enhance their understanding of MP pollution and contribute to effective mitigation strategies.
Top Cited PapersOpen AccessA Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices
Sustainable development is a big global challenge for the 21st century. In recent years, a class of emerging contaminants known as microplastics (MPs) has been identified as a significant pollutant with the potential to harm ecosystems. These small plastic particles have been found in every compartment of the planet, with aquatic habitats serving as the ultimate sink. The challenge to extract MPs from different environmental matrices is a tangible and imperative issue. One of the primary specialties of research in environmental chemistry is the development of simple, rapid, low-cost, sensitive, and selective analytical methods for the extraction and identification of MPs in the environment. The present review describes the developments in MP extraction methods from complex environmental matrices. All existing methodologies (new, old, and proof-of-concept) are discussed and evaluated for their potential usefulness to extract MPs from various biotic and abiotic matrices for the sake of progress and innovation. This study concludes by addressing the current challenges and outlining future research objectives aimed at combating MP pollution. Additionally, a set of recommendations is provided to assist researchers in selecting appropriate analytical techniques for obtaining accurate results. To facilitate this process, a proposed roadmap for MP extraction is presented, considering the specific environmental compartments under investigation. By following this roadmap, researchers can enhance their understanding of MP pollution and contribute to effective mitigation strategies.
- Open Access
Efficiency of Coagulation/Flocculation for the Removal of Complex Mixture of Textile Fibers from Water
Synthetic fibers enter wastewater treatment plants together with natural fibers, which may affect treatment efficiency, a fact not considered in previous studies. Therefore, the aim of the present study was to evaluate the efficiency of the coagulation/flocculation process for the removal of a mixture of textile fibers from different water matrices. Natural and synthetic fibers (100 mg/L; cotton, polyacrylonitrile, and polyamide) were added to a synthetic matrix, surface water and laundry wastewater and subjected to coagulation/flocculation experiments with ferric chloride (FeCl3) and polyaluminum chloride (PACl) under laboratory conditions. In the synthetic matrix, both coagulants were found to be effective, with FeCl3 having a lesser advantage, removing textile fibers almost completely from the water (up to 99% at a concentration of 3.94 mM). In surface water, all dosages had approximately similar high values, with the coagulant resulting in complete removal. In laundry effluent, the presence of surfactants is thought to affect coagulation efficiency. PACl was found to be effective in removing textile fibers from laundry wastewater, with the lowest removal efficiency being 89% and all dosages having similar removal efficiencies. Natural organic matter and bicarbonates showed a positive effect on the efficiency of FeCl3 in removing textile fibers from surface water. PACl showed better performance in coagulating laundry wastewater while surfactants had a negative effect on FeCl3 coagulation efficiency.
Open AccessEfficiency of Coagulation/Flocculation for the Removal of Complex Mixture of Textile Fibers from Water
Synthetic fibers enter wastewater treatment plants together with natural fibers, which may affect treatment efficiency, a fact not considered in previous studies. Therefore, the aim of the present study was to evaluate the efficiency of the coagulation/flocculation process for the removal of a mixture of textile fibers from different water matrices. Natural and synthetic fibers (100 mg/L; cotton, polyacrylonitrile, and polyamide) were added to a synthetic matrix, surface water and laundry wastewater and subjected to coagulation/flocculation experiments with ferric chloride (FeCl3) and polyaluminum chloride (PACl) under laboratory conditions. In the synthetic matrix, both coagulants were found to be effective, with FeCl3 having a lesser advantage, removing textile fibers almost completely from the water (up to 99% at a concentration of 3.94 mM). In surface water, all dosages had approximately similar high values, with the coagulant resulting in complete removal. In laundry effluent, the presence of surfactants is thought to affect coagulation efficiency. PACl was found to be effective in removing textile fibers from laundry wastewater, with the lowest removal efficiency being 89% and all dosages having similar removal efficiencies. Natural organic matter and bicarbonates showed a positive effect on the efficiency of FeCl3 in removing textile fibers from surface water. PACl showed better performance in coagulating laundry wastewater while surfactants had a negative effect on FeCl3 coagulation efficiency.
- Open Access
- 13 February 2023
- Published by MDPI AG in Microplastics
- Vol. 2 (1) , 107-121
Influx of Near-Infrared Technology in Microplastic Community: A Bibliometric Analysis
The abundance of microplastics in the environment poses a constant threat to all parts of the ecosystem, and the scientific community is called upon to help solve the problem. Numerous studies have been published for microplastic analysis, especially in the last decade, with vibrational spectroscopy being the preferred method. According to recent literature, portable spectrometers operating in the near-infrared (NIR) range are being used for the analysis of different types of polymers, and this technique has recently found its way into the analysis of microplastics as a good alternative to expensive and complicated benchtop instruments, such as Fourier-transform infrared (FTIR) spectrometers. The aim of this study is to investigate and evaluate research trends, leading publications, authors, countries, and limitations of the use of NIR spectroscopy in microplastics research, with a comparison to the established FTIR technique.
- 13 February 2023
- Published by MDPI AG in Microplastics
- Vol. 2 (1) , 107-121
Open AccessInflux of Near-Infrared Technology in Microplastic Community: A Bibliometric Analysis
The abundance of microplastics in the environment poses a constant threat to all parts of the ecosystem, and the scientific community is called upon to help solve the problem. Numerous studies have been published for microplastic analysis, especially in the last decade, with vibrational spectroscopy being the preferred method. According to recent literature, portable spectrometers operating in the near-infrared (NIR) range are being used for the analysis of different types of polymers, and this technique has recently found its way into the analysis of microplastics as a good alternative to expensive and complicated benchtop instruments, such as Fourier-transform infrared (FTIR) spectrometers. The aim of this study is to investigate and evaluate research trends, leading publications, authors, countries, and limitations of the use of NIR spectroscopy in microplastics research, with a comparison to the established FTIR technique.
- 1 March 2021
- Published by Elsevier in Journal of Environmental Management
- Vol. 282, 111966
Incineration of sewage sludge and recovery of residue ash as building material: A valuable option as a consequence of the COVID-19 pandemic
- 1 March 2021
- Published by Elsevier in Journal of Environmental Management
- Vol. 282, 111966
Incineration of sewage sludge and recovery of residue ash as building material: A valuable option as a consequence of the COVID-19 pandemic