Zibo Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zibo Wang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Tariq Rafiq
Lehigh University
9 shared publications - Eugenio Schuster
Department of Mechanical Engineering and Mechanics, Lehigh University, Bethlehem, PA, USA
6 shared publications - Sai Tej Paruchuri
Lehigh University
6 shared publications - Brian Leard
Department of Mechanical Engineering and Mechanics, Lehigh University, Bethlehem, PA 18015, USA
4 shared publications - Shira Morosohk
Oak Ridge Associated Universities, San Diego, CA, United States of America
3 shared publications E. Schuster
2 shared publications
Latest Publications
- Open Access
MMMnet: A Neural Network Surrogate for Real-Time Transport Prediction Based on the Updated Multi-Mode Model
The Multi-Mode Model (MMM) is a physics-based anomalous transport model integrated into TRANSP for predicting electron and ion thermal transport, electron and impurity particle transport, and toroidal and poloidal momentum transport. While MMM provides valuable predictive capabilities, its computational cost, although manageable for standard simulations, is too high for real-time control applications. MMMnet, a neural network-based surrogate model, is developed to address this challenge by significantly reducing computation time while maintaining high accuracy. Trained on TRANSP simulations of DIII-D discharges, MMMnet incorporates an updated version of MMM (9.0.10) with enhanced physics, including isotopic effects, plasma shaping via effective magnetic shear, unified correlation lengths for ion-scale modes, and a new physics-based model for the electromagnetic electron temperature gradient mode. A key advancement is MMMnet’s ability to predict all six transport coefficients, providing a comprehensive representation of plasma transport dynamics. MMMnet achieves a two-order-of-magnitude speed improvement while maintaining strong correlation with MMM diffusivities, making it well-suited for real-time tokamak control and scenario optimization.
Open AccessMMMnet: A Neural Network Surrogate for Real-Time Transport Prediction Based on the Updated Multi-Mode Model
The Multi-Mode Model (MMM) is a physics-based anomalous transport model integrated into TRANSP for predicting electron and ion thermal transport, electron and impurity particle transport, and toroidal and poloidal momentum transport. While MMM provides valuable predictive capabilities, its computational cost, although manageable for standard simulations, is too high for real-time control applications. MMMnet, a neural network-based surrogate model, is developed to address this challenge by significantly reducing computation time while maintaining high accuracy. Trained on TRANSP simulations of DIII-D discharges, MMMnet incorporates an updated version of MMM (9.0.10) with enhanced physics, including isotopic effects, plasma shaping via effective magnetic shear, unified correlation lengths for ion-scale modes, and a new physics-based model for the electromagnetic electron temperature gradient mode. A key advancement is MMMnet’s ability to predict all six transport coefficients, providing a comprehensive representation of plasma transport dynamics. MMMnet achieves a two-order-of-magnitude speed improvement while maintaining strong correlation with MMM diffusivities, making it well-suited for real-time tokamak control and scenario optimization.
- Open Access
- 7 July 2025
- Published by MDPI AG in Preprints.org
MMMnet: A Neural Network Surrogate for Real-time Transport Prediction Based on the Updated Multi-Mode Model
The Multi-Mode Model (MMM) is a physics-based anomalous transport model integrated into TRANSP for predicting electron and ion thermal transport, electron and impurity particle transport, and toroidal and poloidal momentum transport. While MMM provides valuable predictive capabilities, its computational cost, though manageable for standard simulations, is too high for real-time control applications. MMMnet, a neural network-based surrogate model, is developed to address this challenge by significantly reducing computation time while maintaining high accuracy. Trained on TRANSP simulations of DIII-D discharges, MMMnet incorporates an updated version of MMM (9.0.10) with enhanced physics, including isotopic effects, plasma shaping via effective magnetic shear, unified correlation lengths for ion-scale modes, and a new physics-based model for the electromagnetic electron temperature gradient mode. A key advancement is MMMnet’s ability to predict all six transport coefficients, providing a comprehensive representation of plasma transport dynamics. MMMnet achieves a two-order-of-magnitude speed improvement while maintaining strong correlation with MMM diffusivities, making it well-suited for real-time tokamak control and scenario optimization.
- 7 July 2025
- Published by MDPI AG in Preprints.org
Open AccessMMMnet: A Neural Network Surrogate for Real-time Transport Prediction Based on the Updated Multi-Mode Model
The Multi-Mode Model (MMM) is a physics-based anomalous transport model integrated into TRANSP for predicting electron and ion thermal transport, electron and impurity particle transport, and toroidal and poloidal momentum transport. While MMM provides valuable predictive capabilities, its computational cost, though manageable for standard simulations, is too high for real-time control applications. MMMnet, a neural network-based surrogate model, is developed to address this challenge by significantly reducing computation time while maintaining high accuracy. Trained on TRANSP simulations of DIII-D discharges, MMMnet incorporates an updated version of MMM (9.0.10) with enhanced physics, including isotopic effects, plasma shaping via effective magnetic shear, unified correlation lengths for ion-scale modes, and a new physics-based model for the electromagnetic electron temperature gradient mode. A key advancement is MMMnet’s ability to predict all six transport coefficients, providing a comprehensive representation of plasma transport dynamics. MMMnet achieves a two-order-of-magnitude speed improvement while maintaining strong correlation with MMM diffusivities, making it well-suited for real-time tokamak control and scenario optimization.
- Open Access
- 23 March 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 215
Enabling model-based scenario control in EAST by fast surrogate modeling within COTSIM
- 23 March 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 215
Open AccessEnabling model-based scenario control in EAST by fast surrogate modeling within COTSIM
- 11 December 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (1) , 015012
Simultaneous control of the electron temperature and safety factor profiles in DIII-D using model-based optimal control techniques
Future tokamak power plants will likely operate using a single, well-defined plasma scenario, either in steady state or for very long pulse lengths. In order to enhance the robustness of the scenario, feedback controllers for a variety of plasma properties will be necessary to counteract any disturbances and ensure safe operation. However, only a limited set of actuators will be available to control many different quantities. Because of this, it is necessary to develop controllers that are able to regulate multiple plasma properties using a limited set of actuators. To this end, a controller has been developed for the simultaneous regulation of both the electron temperature and safety factor profiles in DIII-D. This algorithm uses a linear quadratic integral control synthesis approach based on a linearized model of the dynamics of the two profiles. Two neural network surrogate models, NubeamNet and MMMnet, are included to improve the fidelity of the model. The controller has been tested in simulation using COTSIM, and has demonstrated the ability to simultaneously track changes in both the electron temperature and safety factor targets, including changes in both the magnitude and the shape of the profiles.
- 11 December 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (1) , 015012
Simultaneous control of the electron temperature and safety factor profiles in DIII-D using model-based optimal control techniques
Future tokamak power plants will likely operate using a single, well-defined plasma scenario, either in steady state or for very long pulse lengths. In order to enhance the robustness of the scenario, feedback controllers for a variety of plasma properties will be necessary to counteract any disturbances and ensure safe operation. However, only a limited set of actuators will be available to control many different quantities. Because of this, it is necessary to develop controllers that are able to regulate multiple plasma properties using a limited set of actuators. To this end, a controller has been developed for the simultaneous regulation of both the electron temperature and safety factor profiles in DIII-D. This algorithm uses a linear quadratic integral control synthesis approach based on a linearized model of the dynamics of the two profiles. Two neural network surrogate models, NubeamNet and MMMnet, are included to improve the fidelity of the model. The controller has been tested in simulation using COTSIM, and has demonstrated the ability to simultaneously track changes in both the electron temperature and safety factor targets, including changes in both the magnitude and the shape of the profiles.
- Open Access
Control-Oriented Free-Boundary Equilibrium Solver for Tokamaks
A free-boundary equilibrium solver for an axisymmetric tokamak geometry was developed based on the finite difference method and Picard iteration in a rectangular computational area. The solver can run either in forward mode, where external coil currents are prescribed until the converged magnetic flux function map is achieved, or in inverse mode, where the desired plasma boundary, with or without an X-point, is prescribed to determine the required coil currents. The equilibrium solutions are made consistent with prescribed plasma parameters, such as the total plasma current, poloidal beta, or safety factor at a specified flux surface. To verify the mathematical correctness and accuracy of the solver, the solution obtained using this numerical solver was compared with that from an analytic fixed-boundary equilibrium solver based on the EAST geometry. Additionally, the proposed solver was benchmarked against another numerical solver based on the finite-element and Newton-iteration methods in a triangular-based mesh. Finally, the proposed solver was compared with equilibrium reconstruction results in DIII-D experiments.Open AccessControl-Oriented Free-Boundary Equilibrium Solver for Tokamaks
A free-boundary equilibrium solver for an axisymmetric tokamak geometry was developed based on the finite difference method and Picard iteration in a rectangular computational area. The solver can run either in forward mode, where external coil currents are prescribed until the converged magnetic flux function map is achieved, or in inverse mode, where the desired plasma boundary, with or without an X-point, is prescribed to determine the required coil currents. The equilibrium solutions are made consistent with prescribed plasma parameters, such as the total plasma current, poloidal beta, or safety factor at a specified flux surface. To verify the mathematical correctness and accuracy of the solver, the solution obtained using this numerical solver was compared with that from an analytic fixed-boundary equilibrium solver based on the EAST geometry. Additionally, the proposed solver was benchmarked against another numerical solver based on the finite-element and Newton-iteration methods in a triangular-based mesh. Finally, the proposed solver was compared with equilibrium reconstruction results in DIII-D experiments. - 7 August 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 206
Optimal control of the electron temperature profile in DIII-D using machine learning surrogate models
- 7 August 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 206
Optimal control of the electron temperature profile in DIII-D using machine learning surrogate models
- Open Access
- 8 July 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (8) , 086052
Hybrid model predictive control techniques for safety factor profile and stored energy regulation while incorporating NBI constraints
A novel hybrid Model Predictive Control (MPC) algorithm has been designed for simultaneous safety factor (q) profile and stored energy (w) control while incorporating the pulse-width-modulation constraints associated with the neutral beam injection (NBI) system. Regulation of the q-profile has been extensively shown to be a key factor for improved confinement as well as non-inductive sustainment of the plasma current. Simultaneous control of w is necessary to prevent the triggering of pressure-driven magnetohydrodynamic instabilities as the controller shapes the q profile. Conventional MPC schemes proposed for q-profile control have considered the NBI powers as continuous-time signals, ignoring the discrete-time nature of these actuators and leading in some cases to performance loss. The hybrid MPC scheme in this work has the capability of incorporating the discrete-time actuator dynamics as additional constraints. In nonlinear simulations, the proposed hybrid MPC scheme demonstrates improved q-profile+w control performance for NSTX-U operating scenarios.
- 8 July 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (8) , 086052
Open AccessHybrid model predictive control techniques for safety factor profile and stored energy regulation while incorporating NBI constraints
A novel hybrid Model Predictive Control (MPC) algorithm has been designed for simultaneous safety factor (q) profile and stored energy (w) control while incorporating the pulse-width-modulation constraints associated with the neutral beam injection (NBI) system. Regulation of the q-profile has been extensively shown to be a key factor for improved confinement as well as non-inductive sustainment of the plasma current. Simultaneous control of w is necessary to prevent the triggering of pressure-driven magnetohydrodynamic instabilities as the controller shapes the q profile. Conventional MPC schemes proposed for q-profile control have considered the NBI powers as continuous-time signals, ignoring the discrete-time nature of these actuators and leading in some cases to performance loss. The hybrid MPC scheme in this work has the capability of incorporating the discrete-time actuator dynamics as additional constraints. In nonlinear simulations, the proposed hybrid MPC scheme demonstrates improved q-profile+w control performance for NSTX-U operating scenarios.
- 19 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4147-4153
Neural-Network-Based Free-Boundary Equilibrium Solver to Enable Fast Scenario Simulations
A numerical free-boundary equilibrium (FBE) solver, based on finite-difference and Picard-iteration methods, has been recently developed on a rectangular grid to compute the poloidal-flux distribution in tokamaks. An accelerated version of this computationally intensive numerical solver, named FBE-Net, has been developed in this work by leveraging the physics-informed neural network (PINN) method. Within this framework, the neural-network (NN) component employs a fully connected multilayer perceptron (MLP) architecture. Critically, the underlying physical constraints are defined by the Grad–Shafranov (G-S) equation, ensuring the NN-based solver adheres to essential governing principles. FBE-net is trained on a dataset generated by the numerical solver, which serves as a source of ground truth. The inputs for FBE-Net are the plasma current, the normalized beta, and the coil currents, while the outputs are the poloidal-flux map and a set of flux-averaged equilibrium parameters. When compared to the numerical solver, the NN-based solver displays a significant increase in computational efficiency without notably sacrificing accuracy.
- 19 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4147-4153
Neural-Network-Based Free-Boundary Equilibrium Solver to Enable Fast Scenario Simulations
A numerical free-boundary equilibrium (FBE) solver, based on finite-difference and Picard-iteration methods, has been recently developed on a rectangular grid to compute the poloidal-flux distribution in tokamaks. An accelerated version of this computationally intensive numerical solver, named FBE-Net, has been developed in this work by leveraging the physics-informed neural network (PINN) method. Within this framework, the neural-network (NN) component employs a fully connected multilayer perceptron (MLP) architecture. Critically, the underlying physical constraints are defined by the Grad–Shafranov (G-S) equation, ensuring the NN-based solver adheres to essential governing principles. FBE-net is trained on a dataset generated by the numerical solver, which serves as a source of ground truth. The inputs for FBE-Net are the plasma current, the normalized beta, and the coil currents, while the outputs are the poloidal-flux map and a set of flux-averaged equilibrium parameters. When compared to the numerical solver, the NN-based solver displays a significant increase in computational efficiency without notably sacrificing accuracy.
- Open Access
Validating the Multi-Mode Model’s Ability to Reproduce Diverse Tokamak Scenarios
A large-scale validation exercise was conducted to assess the multi-mode model (MMM) anomalous transport model in the integrated modeling code TRANSP. The validation included 6 EAST discharges, 17 KSTAR discharges, 72 JET ITER-like wall D-D discharges, and 4 DIII-D fusion plasma discharges. Using the MMM, the study computed anomalous thermal, particle, impurity, and momentum transport within TRANSP. Simulations for EAST, KSTAR, and JET focused on electron and ion temperatures and safety factor profiles, while DIII-D simulations also considered electron density, toroidal rotation frequency, and flow shear. The predicted profiles were compared to experimental data at the diagnostic time, quantifying the comparison using root-mean-square (RMS) deviation and relative offsets. The study found an average RMS deviation of 9.3% for predicted electron temperature and 10.5% for ion temperature, falling within the experimental measurement error range 20%. The MMM model demonstrated computational efficiency and the ability to accurately reproduce a wide range of discharges, including various scenarios and plasma parameters, such as plasma density, gyroradius, collisionality, beta, safety factor and heating method variations.
Open AccessValidating the Multi-Mode Model’s Ability to Reproduce Diverse Tokamak Scenarios
A large-scale validation exercise was conducted to assess the multi-mode model (MMM) anomalous transport model in the integrated modeling code TRANSP. The validation included 6 EAST discharges, 17 KSTAR discharges, 72 JET ITER-like wall D-D discharges, and 4 DIII-D fusion plasma discharges. Using the MMM, the study computed anomalous thermal, particle, impurity, and momentum transport within TRANSP. Simulations for EAST, KSTAR, and JET focused on electron and ion temperatures and safety factor profiles, while DIII-D simulations also considered electron density, toroidal rotation frequency, and flow shear. The predicted profiles were compared to experimental data at the diagnostic time, quantifying the comparison using root-mean-square (RMS) deviation and relative offsets. The study found an average RMS deviation of 9.3% for predicted electron temperature and 10.5% for ion temperature, falling within the experimental measurement error range 20%. The MMM model demonstrated computational efficiency and the ability to accurately reproduce a wide range of discharges, including various scenarios and plasma parameters, such as plasma density, gyroradius, collisionality, beta, safety factor and heating method variations.
- 13 February 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 191
Neural network model of neutral beam injection in the EAST tokamak to enable fast transport simulations
- 13 February 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 191
Neural network model of neutral beam injection in the EAST tokamak to enable fast transport simulations