Himanshu Borade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Himanshu Borade has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Vinay Vakharia
Pandit Deendayal Energy University
5 shared publications - Milind Shah
Department of Product Development, Production and Design, School of Engineering, Jönköping University, 55318 Jönköping, Sweden
4 shared publications - Vishal Ashok Wankhede
Indian Institute of Management Bodh Gaya
3 shared publications - Anshuman Purohit
Mechanical Engineering Department, Medi-Caps University, Indore 453331, MP, India
2 shared publications - Hitesh Agrawal
Mechanical Engineering Department, Medi-Caps University, Indore 453331, India
2 shared publications - Pranav Nair
Department of Mechanical Engineering School of Technology PDEU Gandhinagar Gujarat 382426 India
2 shared publications
Latest Publications
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
An Efficient Approach for Appliances Energy Prediction using Differential Evolution Optimization and Light GBM Machine Learning Model
This study presents a new method for assessing the energy use of appliances in a low energy residence with the goal of improving energy consumption predictions. Information was collected at 10-minute intervals throughout a period of 137 days. The collected data includes a wide range of equipment, with a specific emphasis on lighting and the relationship between humidity levels and room occupancy. The dataset was divided into three subgroups depending on the lighting feature in order to assess the predictive importance of various parameters: all records, recordings without lighting, and records only including lighting. The suggested investigation employs a hybrid machine learning framework that integrates Extreme Gradient Boosting (XGBoost) and Light Gradient Boosting Machine (Light GBM) to forecast energy consumption. In order to improve the precision of the model, a sophisticated differential evolution approach is used to optimize the model's parameters. The models were compared using several performance indicators, such as the mean absolute error (MAE), root mean square error (RMSE), coefficient of determination (R2), and mean absolute percentage error (MAPE). The prediction results showed low error rates and strong correlation coefficients for all of these measurements, highlighting the usefulness of our technique in improving operational efficiency and forecast accuracy in energy management. The combination of bio-inspired optimization algorithms with ensemble machine learning approaches has significant promise for improving energy consumption predictions, which are essential for sustainable home energy management.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
An Efficient Approach for Appliances Energy Prediction using Differential Evolution Optimization and Light GBM Machine Learning Model
This study presents a new method for assessing the energy use of appliances in a low energy residence with the goal of improving energy consumption predictions. Information was collected at 10-minute intervals throughout a period of 137 days. The collected data includes a wide range of equipment, with a specific emphasis on lighting and the relationship between humidity levels and room occupancy. The dataset was divided into three subgroups depending on the lighting feature in order to assess the predictive importance of various parameters: all records, recordings without lighting, and records only including lighting. The suggested investigation employs a hybrid machine learning framework that integrates Extreme Gradient Boosting (XGBoost) and Light Gradient Boosting Machine (Light GBM) to forecast energy consumption. In order to improve the precision of the model, a sophisticated differential evolution approach is used to optimize the model's parameters. The models were compared using several performance indicators, such as the mean absolute error (MAE), root mean square error (RMSE), coefficient of determination (R2), and mean absolute percentage error (MAPE). The prediction results showed low error rates and strong correlation coefficients for all of these measurements, highlighting the usefulness of our technique in improving operational efficiency and forecast accuracy in energy management. The combination of bio-inspired optimization algorithms with ensemble machine learning approaches has significant promise for improving energy consumption predictions, which are essential for sustainable home energy management.
- Open Access
- 2 September 2024
- Published by MDPI AG in Electronics
- Vol. 13 (17) , 3484
Utilizing TGAN and ConSinGAN for Improved Tool Wear Prediction: A Comparative Study with ED-LSTM, GRU, and CNN Models
Developing precise deep learning (DL) models for predicting tool wear is challenging, particularly due to the scarcity of experimental data. To address this issue, this paper introduces an innovative approach that leverages the capabilities of tabular generative adversarial networks (TGAN) and conditional single image GAN (ConSinGAN). These models are employed to generate synthetic data, thereby enriching the dataset and enhancing the robustness of the predictive models. The efficacy of this methodology was rigorously evaluated using publicly available milling datasets. The pre-processing of acoustic emission data involved the application of the Walsh-Hadamard transform, followed by the generation of spectrograms. These spectrograms were then used to extract statistical attributes, forming a comprehensive feature vector for model input. Three DL models—encoder-decoder long short-term memory (ED-LSTM), gated recurrent unit (GRU), and convolutional neural network (CNN)—were applied to assess their tool wear prediction capabilities. The application of 10-fold cross-validation across these models yielded exceptionally low RMSE and MAE values of 0.02 and 0.16, respectively, underscoring the effectiveness of this approach. The results not only highlight the potential of TGAN and ConSinGAN in mitigating data scarcity but also demonstrate significant improvements in the accuracy of tool wear predictions, paving the way for more reliable and precise predictive maintenance in manufacturing processes.
- 2 September 2024
- Published by MDPI AG in Electronics
- Vol. 13 (17) , 3484
Open AccessUtilizing TGAN and ConSinGAN for Improved Tool Wear Prediction: A Comparative Study with ED-LSTM, GRU, and CNN Models
Developing precise deep learning (DL) models for predicting tool wear is challenging, particularly due to the scarcity of experimental data. To address this issue, this paper introduces an innovative approach that leverages the capabilities of tabular generative adversarial networks (TGAN) and conditional single image GAN (ConSinGAN). These models are employed to generate synthetic data, thereby enriching the dataset and enhancing the robustness of the predictive models. The efficacy of this methodology was rigorously evaluated using publicly available milling datasets. The pre-processing of acoustic emission data involved the application of the Walsh-Hadamard transform, followed by the generation of spectrograms. These spectrograms were then used to extract statistical attributes, forming a comprehensive feature vector for model input. Three DL models—encoder-decoder long short-term memory (ED-LSTM), gated recurrent unit (GRU), and convolutional neural network (CNN)—were applied to assess their tool wear prediction capabilities. The application of 10-fold cross-validation across these models yielded exceptionally low RMSE and MAE values of 0.02 and 0.16, respectively, underscoring the effectiveness of this approach. The results not only highlight the potential of TGAN and ConSinGAN in mitigating data scarcity but also demonstrate significant improvements in the accuracy of tool wear predictions, paving the way for more reliable and precise predictive maintenance in manufacturing processes.
- Open Access
Deep Learning-Enhanced Small-Sample Bearing Fault Analysis Using Q-Transform and HOG Image Features in a GRU-XAI Framework
Timely prediction of bearing faults is essential for minimizing unexpected machine downtime and improving industrial equipment’s operational dependability. The Q transform was utilized for preprocessing the sixty-four vibration signals that correspond to the four bearing conditions. Additionally, statistical features, also known as attributes, are extracted from the Histogram of Oriented Gradients (HOG). To assess these features, the Explainable AI (XAI) technique employed the SHAP (Shapely Additive Explanations) method. The effectiveness of the GRU, LSTM, and SVM models in the first stage was evaluated using training and tenfold cross-validation. The SSA optimization algorithm (SSA) was employed in a subsequent phase to optimize the hyperparameters of the algorithms. The findings of the research are rigorously analyzed and assessed in four specific areas: the default configuration of the model, the inclusion of selected features using XAI, the optimization of hyperparameters, and a hybrid technique that combines SSA and XAI-based feature selection. The GRU model has superior performance compared to the other models, achieving an impressive accuracy of 98.2%. This is particularly evident when using SSA and XAI-informed features. The subsequent model is the LSTM, which has an impressive accuracy rate of 96.4%. During tenfold cross-validation, the Support Vector Machine (SVM) achieves a noticeably reduced maximum accuracy of 84.82%, even though the hybrid optimization technique shows improvement. The results of this study usually show that the most effective model for fault prediction is the GRU model, configured with the attributes chosen by XAI, followed by LSTM and SVM.
Open AccessDeep Learning-Enhanced Small-Sample Bearing Fault Analysis Using Q-Transform and HOG Image Features in a GRU-XAI Framework
Timely prediction of bearing faults is essential for minimizing unexpected machine downtime and improving industrial equipment’s operational dependability. The Q transform was utilized for preprocessing the sixty-four vibration signals that correspond to the four bearing conditions. Additionally, statistical features, also known as attributes, are extracted from the Histogram of Oriented Gradients (HOG). To assess these features, the Explainable AI (XAI) technique employed the SHAP (Shapely Additive Explanations) method. The effectiveness of the GRU, LSTM, and SVM models in the first stage was evaluated using training and tenfold cross-validation. The SSA optimization algorithm (SSA) was employed in a subsequent phase to optimize the hyperparameters of the algorithms. The findings of the research are rigorously analyzed and assessed in four specific areas: the default configuration of the model, the inclusion of selected features using XAI, the optimization of hyperparameters, and a hybrid technique that combines SSA and XAI-based feature selection. The GRU model has superior performance compared to the other models, achieving an impressive accuracy of 98.2%. This is particularly evident when using SSA and XAI-informed features. The subsequent model is the LSTM, which has an impressive accuracy rate of 96.4%. During tenfold cross-validation, the Support Vector Machine (SVM) achieves a noticeably reduced maximum accuracy of 84.82%, even though the hybrid optimization technique shows improvement. The results of this study usually show that the most effective model for fault prediction is the GRU model, configured with the attributes chosen by XAI, followed by LSTM and SVM.
- 26 January 2024
- Published by Institution of Engineering and Technology (IET) in IET Conference Proceedings
- Vol. 2023 (39) , 99-103
Battery state of health estimation in smart transportation: a machine learning approach
Batteries are critical in the creation and operation of smart transportation systems such as electric vehicles (EVs), as they provide efficiency, dependability, and endurance. Accurate State of Health Estimation (SoH) estimation guarantees that the battery can properly store and transfer energy, maximizing the vehicle's range and performance. By extending battery life and lowering the need for premature replacements, battery SoH estimation contributes to sustainable mobility. This minimizes the environmental impact of battery manufacturing and disposal. Present study focused on four specific batteries tested at NASA's Prognostic Centre of Excellence. The study utilized Artificial Neural Networks (ANN) and Random Forest (RF), to estimate discharge capacity using training, testing, and validated with ten-fold cross-validation. In the current analysis, three accepted metrics were used to evaluate the effectiveness of models. In terms of prediction accuracy, the findings showed that RF consistently beat ANN, with lower Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) values and higher Coefficient of Determination (R2).
- 26 January 2024
- Published by Institution of Engineering and Technology (IET) in IET Conference Proceedings
- Vol. 2023 (39) , 99-103
Battery state of health estimation in smart transportation: a machine learning approach
Batteries are critical in the creation and operation of smart transportation systems such as electric vehicles (EVs), as they provide efficiency, dependability, and endurance. Accurate State of Health Estimation (SoH) estimation guarantees that the battery can properly store and transfer energy, maximizing the vehicle's range and performance. By extending battery life and lowering the need for premature replacements, battery SoH estimation contributes to sustainable mobility. This minimizes the environmental impact of battery manufacturing and disposal. Present study focused on four specific batteries tested at NASA's Prognostic Centre of Excellence. The study utilized Artificial Neural Networks (ANN) and Random Forest (RF), to estimate discharge capacity using training, testing, and validated with ten-fold cross-validation. In the current analysis, three accepted metrics were used to evaluate the effectiveness of models. In terms of prediction accuracy, the findings showed that RF consistently beat ANN, with lower Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) values and higher Coefficient of Determination (R2).
- Open Access
Predicting Li-Ion Battery Remaining Useful Life: An XDFM-Driven Approach with Explainable AI
The accurate prediction of the remaining useful life (RUL) of Li-ion batteries holds significant importance in the field of predictive maintenance, as it ensures the reliability and long-term viability of these batteries. In this study, we undertake a comprehensive analysis and comparison of three distinct machine learning models—XDFM, A-LSTM, and GBM—with the objective of assessing their predictive capabilities for RUL estimation. The performance evaluation of these models involves the utilization of root-mean-square error and mean absolute error metrics, which are derived after the training and testing stages of the models. Additionally, we employ the Shapley-based Explainable AI technique to identify and select the most relevant features for the prediction task. Among the evaluated models, XDFM consistently demonstrates superior performance, consistently achieving the lowest RMSE and MAE values across different operational cycles and feature selections. However, it is worth noting that both the A-LSTM and GBM models exhibit competitive results, showcasing their potential for accurate RUL prediction of Li-ion batteries. The findings of this study offer valuable insights into the efficacy of these machine learning models, highlighting their capacity to make precise RUL predictions across diverse operational cycles for batteries.
Open AccessPredicting Li-Ion Battery Remaining Useful Life: An XDFM-Driven Approach with Explainable AI
The accurate prediction of the remaining useful life (RUL) of Li-ion batteries holds significant importance in the field of predictive maintenance, as it ensures the reliability and long-term viability of these batteries. In this study, we undertake a comprehensive analysis and comparison of three distinct machine learning models—XDFM, A-LSTM, and GBM—with the objective of assessing their predictive capabilities for RUL estimation. The performance evaluation of these models involves the utilization of root-mean-square error and mean absolute error metrics, which are derived after the training and testing stages of the models. Additionally, we employ the Shapley-based Explainable AI technique to identify and select the most relevant features for the prediction task. Among the evaluated models, XDFM consistently demonstrates superior performance, consistently achieving the lowest RMSE and MAE values across different operational cycles and feature selections. However, it is worth noting that both the A-LSTM and GBM models exhibit competitive results, showcasing their potential for accurate RUL prediction of Li-ion batteries. The findings of this study offer valuable insights into the efficacy of these machine learning models, highlighting their capacity to make precise RUL predictions across diverse operational cycles for batteries.
- Open Access
Enhancing Tool Wear Prediction Accuracy Using Walsh–Hadamard Transform, DCGAN and Dragonfly Algorithm-Based Feature Selection
Tool wear is an important concern in the manufacturing sector that leads to quality loss, lower productivity, and increased downtime. In recent years, there has been a rise in the popularity of implementing TCM systems using various signal processing methods and machine learning algorithms. In the present paper, the authors propose a TCM system that incorporates the Walsh–Hadamard transform for signal processing, DCGAN aims to circumvent the issue of the availability of limited experimental dataset, and the exploration of three machine learning models: support vector regression, gradient boosting regression, and recurrent neural network for tool wear prediction. The mean absolute error, mean square error and root mean square error are used to assess the prediction errors from three machine learning models. To identify these relevant features, three metaheuristic optimization feature selection algorithms, Dragonfly, Harris hawk, and Genetic algorithms, were explored, and prediction results were compared. The results show that the feature selected through Dragonfly algorithms exhibited the least MSE (0.03), RMSE (0.17), and MAE (0.14) with a recurrent neural network model. By identifying the tool wear patterns and predicting when maintenance is required, the proposed methodology could help manufacturing companies save money on repairs and replacements, as well as reduce overall production costs by minimizing downtime.
Open AccessEnhancing Tool Wear Prediction Accuracy Using Walsh–Hadamard Transform, DCGAN and Dragonfly Algorithm-Based Feature Selection
Tool wear is an important concern in the manufacturing sector that leads to quality loss, lower productivity, and increased downtime. In recent years, there has been a rise in the popularity of implementing TCM systems using various signal processing methods and machine learning algorithms. In the present paper, the authors propose a TCM system that incorporates the Walsh–Hadamard transform for signal processing, DCGAN aims to circumvent the issue of the availability of limited experimental dataset, and the exploration of three machine learning models: support vector regression, gradient boosting regression, and recurrent neural network for tool wear prediction. The mean absolute error, mean square error and root mean square error are used to assess the prediction errors from three machine learning models. To identify these relevant features, three metaheuristic optimization feature selection algorithms, Dragonfly, Harris hawk, and Genetic algorithms, were explored, and prediction results were compared. The results show that the feature selected through Dragonfly algorithms exhibited the least MSE (0.03), RMSE (0.17), and MAE (0.14) with a recurrent neural network model. By identifying the tool wear patterns and predicting when maintenance is required, the proposed methodology could help manufacturing companies save money on repairs and replacements, as well as reduce overall production costs by minimizing downtime.
- Open Access
Estimation of Lithium-ion Battery Discharge Capacity by Integrating Optimized Explainable-AI and Stacked LSTM Model
Accurate lithium-ion battery state of health evaluation is crucial for correctly operating and managing battery-based energy storage systems. Experimental determination is problematic in these applications since standard functioning is necessary. Machine learning techniques enable accurate and effective data-driven predictions in such situations. In the present paper, an optimized explainable artificial intelligence (Ex-AI) model is proposed to predict the discharge capacity of the battery. In the initial stage, three deep learning (DL) models, stacked long short-term memory networks (stacked LSTMs), gated recurrent unit (GRU) networks, and stacked recurrent neural networks (SRNNs) were developed based on the training of six input features. Ex-AI was applied to identify the relevant features and further optimize Ex-AI operating parameters, and the jellyfish metaheuristic optimization technique was considered. The results reveal that discharge capacity was better predicted when the jellyfish-Ex-AI model was applied. A very low RMSE of 0.04, MAE of 0.60, and MAPE of 0.03 were observed with the Stacked-LSTM model, demonstrating our proposed methodology’s utility.
Open AccessEstimation of Lithium-ion Battery Discharge Capacity by Integrating Optimized Explainable-AI and Stacked LSTM Model
Accurate lithium-ion battery state of health evaluation is crucial for correctly operating and managing battery-based energy storage systems. Experimental determination is problematic in these applications since standard functioning is necessary. Machine learning techniques enable accurate and effective data-driven predictions in such situations. In the present paper, an optimized explainable artificial intelligence (Ex-AI) model is proposed to predict the discharge capacity of the battery. In the initial stage, three deep learning (DL) models, stacked long short-term memory networks (stacked LSTMs), gated recurrent unit (GRU) networks, and stacked recurrent neural networks (SRNNs) were developed based on the training of six input features. Ex-AI was applied to identify the relevant features and further optimize Ex-AI operating parameters, and the jellyfish metaheuristic optimization technique was considered. The results reveal that discharge capacity was better predicted when the jellyfish-Ex-AI model was applied. A very low RMSE of 0.04, MAE of 0.60, and MAPE of 0.03 were observed with the Stacked-LSTM model, demonstrating our proposed methodology’s utility.