Ranjan Kumar Behera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ranjan Kumar Behera has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Hiroyuki Kanda
National Institute of Advanced Industrial Science and Technology (AIST) Tsukuba Ibaraki Japan
4 shared publications - Hiroyuki Matsuzaki
Research Institute for Material and Chemical Measurement, National Metrology Institute of Japan (NMIJ), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan
4 shared publications - Naoyuki Nishimura
National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
4 shared publications - Takurou N. Murakami
National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
4 shared publications - Hiroyuki Yaguchi
Graduate School of Science and Engineering, Saitama University, 255 Shimo-Okubo, Sakura-ku, Saitama 338-8570, Japan
2 shared publications - Kohei Yamamoto
National Institute of Advanced Industrial Science and Technology (AIST) Tsukuba Ibaraki Japan
2 shared publications
Latest Publications
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (17) , 8734-8744
Differentiation between bulk and interfacial properties: analysis of time-dependent carrier injection in perovskite solar cells
Time-dependent carrier injection characters in perovskite solar cells are investigated by excitation power dependence on photoluminescence lifetime measurements to differentiate bulk and heterointerface properties in PSCs.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (17) , 8734-8744
Differentiation between bulk and interfacial properties: analysis of time-dependent carrier injection in perovskite solar cells
Time-dependent carrier injection characters in perovskite solar cells are investigated by excitation power dependence on photoluminescence lifetime measurements to differentiate bulk and heterointerface properties in PSCs.
- Open Access
- 30 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Differentiation Between Bulk and Interfacial Properties: Analysis of Time-Dependent Carrier Injection in Perovskite Solar Cells
Perovskite solar cells (PSCs) have developed rapidly in the last decade, primarily because of improvements in their photovoltaic (PV) performance. However, methods of characterization and analyses for PSCs remain immature, mostly because of the complex multilayered PSC structure. The sandwiched structure of i-type perovskite photoabsorbers having both p-type hole transport materials (HTMs) and n-type electron transport materials (ETMs) facilitates charge separation in the perovskite photoabsorber and thus plays a crucial role in developing efficient PSCs. However, this structure forms multiple heterointerfaces, which more easily undergo structural changes than the bulk and are difficult to characterize independently. Herein, we propose a method for differentiating the bulk and heterointerface properties in PSCs in terms of their carrier dynamics by using excitation power dependence on photoluminescence lifetime (EPD-PLL) measurements. This method exploits the intrinsically different carrier mobility behavior of the PSC components; specifically, the carrier mobilities within perovskite photoabsorbers are significantly higher (by over three orders of magnitude) than those in carrier-transport materials (CTMs). Strong excitation causes carrier accumulation in the CTM bulk, resulting in time-dependent carrier injection, which could be indicative of the bulk CTM properties. In contrast, weak excitation leads to time-independent carrier injection from the perovskite to CTMs, correlating with heterointerface properties. Hence, EPD-PLL measurements differentiate carrier dynamics between the CTM bulk and heterointerfaces. The method was tested by investigating the thermal degradation mechanism of typical Spiro-OMeTAD-based PSCs, revealing that the contribution of heterointerface deterioration by thermal stress can be neglected. The degraded PSCs had unusual PV properties, unlike those of fresh PSCs, and the EPD-PLL results confirmed these unusual properties, facilitating effective PSC characterization. The proposed method can be applied to the characterization of other PSCs, contributing to the further development of PSCs by addressing a missing point: the characterization and analysis of PSCs.
- 30 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDifferentiation Between Bulk and Interfacial Properties: Analysis of Time-Dependent Carrier Injection in Perovskite Solar Cells
Perovskite solar cells (PSCs) have developed rapidly in the last decade, primarily because of improvements in their photovoltaic (PV) performance. However, methods of characterization and analyses for PSCs remain immature, mostly because of the complex multilayered PSC structure. The sandwiched structure of i-type perovskite photoabsorbers having both p-type hole transport materials (HTMs) and n-type electron transport materials (ETMs) facilitates charge separation in the perovskite photoabsorber and thus plays a crucial role in developing efficient PSCs. However, this structure forms multiple heterointerfaces, which more easily undergo structural changes than the bulk and are difficult to characterize independently. Herein, we propose a method for differentiating the bulk and heterointerface properties in PSCs in terms of their carrier dynamics by using excitation power dependence on photoluminescence lifetime (EPD-PLL) measurements. This method exploits the intrinsically different carrier mobility behavior of the PSC components; specifically, the carrier mobilities within perovskite photoabsorbers are significantly higher (by over three orders of magnitude) than those in carrier-transport materials (CTMs). Strong excitation causes carrier accumulation in the CTM bulk, resulting in time-dependent carrier injection, which could be indicative of the bulk CTM properties. In contrast, weak excitation leads to time-independent carrier injection from the perovskite to CTMs, correlating with heterointerface properties. Hence, EPD-PLL measurements differentiate carrier dynamics between the CTM bulk and heterointerfaces. The method was tested by investigating the thermal degradation mechanism of typical Spiro-OMeTAD-based PSCs, revealing that the contribution of heterointerface deterioration by thermal stress can be neglected. The degraded PSCs had unusual PV properties, unlike those of fresh PSCs, and the EPD-PLL results confirmed these unusual properties, facilitating effective PSC characterization. The proposed method can be applied to the characterization of other PSCs, contributing to the further development of PSCs by addressing a missing point: the characterization and analysis of PSCs.
- Open Access
- 29 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (25) , 9130-9138
Unveiled effects of the methylammonium chloride additive on formamidinium lead halide: expediting carrier injection from the photoabsorber to carrier transport layers through spontaneously modulated heterointerfaces in perovskite solar cells
Time-resolved spectroscopies unveil the additional effects of the widely used methylammonium chloride (MACl) additive on FAPbI 3 photoabsorber in perovskite solar cells, spontaneously modulating heterointerfaces for accelerating carrier injections.
- 29 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (25) , 9130-9138
Open AccessUnveiled effects of the methylammonium chloride additive on formamidinium lead halide: expediting carrier injection from the photoabsorber to carrier transport layers through spontaneously modulated heterointerfaces in perovskite solar cells
Time-resolved spectroscopies unveil the additional effects of the widely used methylammonium chloride (MACl) additive on FAPbI 3 photoabsorber in perovskite solar cells, spontaneously modulating heterointerfaces for accelerating carrier injections.
- Open Access
- 29 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Unveiled Effects of Methylammonium Chloride Additives on Formamidinium Lead Halide: Expediting Carrier Injection from the Photoabsorber to Carrier Transport Layers through Spontaneously Modulated Heterointerfaces in Perovskite Solar Cells
Perovskite solar cells (PSCs) based on narrow-bandgap formamidinium lead halide (FAPbI3) photoabsorber have garnered substantial attention owing to their high photovoltaic (PV) performances. Extensive studies have established that the introduction of methylammonium chloride (MACl) significantly improves the bulk quality of FAPbI3 so commonly used; while heating the photoabsorber’s precursor film, the incorporated MACl facilitates the crystalline growth of FAPbI3, simultaneously volatilizing and dissipating from the perovskite layer. However, not only the photoabsorber's bulk quality but also heterointerfaces between the photoabsorber and carrier transport materials importantly contribute to the PV performances. Paradoxically, the MACl effects on FAPbI3 heterointerfaces have been sparingly explored and consequently remained elusive. Herein, the effects of MACl on these heterointerfaces are unveiled by time-resolved photoluminescence spectroscopy and time-resolved microwave conductivity. The MACl additive accelerates carrier injections from FAPbI3 to the carrier transport materials presumably owing to the occurrence of spontaneous modulation of the heterointerfaces. In particular, at the heterointerface between FAPbI3 and the titanium oxide (TiO2) electron transport layer, an emissive interlayer that is chloride-containing and wide-bandgap (FAPbI3-xClx) is formed spontaneously, which most likely serves multiple advantages leading to the observed PV performance enhancement: hole blocking and facilitation of electron injection from FAPbI3 to TiO2 without additional hole trapping. Consequently, the present results provide novel insights into the widely employed MACl additive in FAPbI3 photoabsorbers and thereby propels the further advancement of PSCs. Furthermore, this study demonstrates effective investigation of carrier dynamics with regard to the heterointerface, which is challenging, using potent time-resolved spectroscopies, so will promote development in the material sciences.
- 29 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessUnveiled Effects of Methylammonium Chloride Additives on Formamidinium Lead Halide: Expediting Carrier Injection from the Photoabsorber to Carrier Transport Layers through Spontaneously Modulated Heterointerfaces in Perovskite Solar Cells
Perovskite solar cells (PSCs) based on narrow-bandgap formamidinium lead halide (FAPbI3) photoabsorber have garnered substantial attention owing to their high photovoltaic (PV) performances. Extensive studies have established that the introduction of methylammonium chloride (MACl) significantly improves the bulk quality of FAPbI3 so commonly used; while heating the photoabsorber’s precursor film, the incorporated MACl facilitates the crystalline growth of FAPbI3, simultaneously volatilizing and dissipating from the perovskite layer. However, not only the photoabsorber's bulk quality but also heterointerfaces between the photoabsorber and carrier transport materials importantly contribute to the PV performances. Paradoxically, the MACl effects on FAPbI3 heterointerfaces have been sparingly explored and consequently remained elusive. Herein, the effects of MACl on these heterointerfaces are unveiled by time-resolved photoluminescence spectroscopy and time-resolved microwave conductivity. The MACl additive accelerates carrier injections from FAPbI3 to the carrier transport materials presumably owing to the occurrence of spontaneous modulation of the heterointerfaces. In particular, at the heterointerface between FAPbI3 and the titanium oxide (TiO2) electron transport layer, an emissive interlayer that is chloride-containing and wide-bandgap (FAPbI3-xClx) is formed spontaneously, which most likely serves multiple advantages leading to the observed PV performance enhancement: hole blocking and facilitation of electron injection from FAPbI3 to TiO2 without additional hole trapping. Consequently, the present results provide novel insights into the widely employed MACl additive in FAPbI3 photoabsorbers and thereby propels the further advancement of PSCs. Furthermore, this study demonstrates effective investigation of carrier dynamics with regard to the heterointerface, which is challenging, using potent time-resolved spectroscopies, so will promote development in the material sciences.