Chastryane Barros de Sousa Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chastryane Barros de Sousa Silva has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Maria Alexsandra de Sousa Rios
Grupo de Inovações Tecnológicas e Especialidades Químicas, Departamento de Engenharia Mecânica, Universidade Federal do Ceará, Campus do Pici, Bl. 714, Fortaleza 60440-554, Brazil
3 shared publications - Emanuelle Braga
Grupo de Inovações Tecnológicas e Especialidades Químicas, Departamento de Engenharia Mecânica, Universidade Federal do Ceará, Campus do Pici, Bl. 714, Fortaleza 60440-554, Brazil
2 shared publications - João Vitor da Silveira Nunes
Universidade Federal do Ceará, Departamento de Engenharia Metalúrgica e de Materiais, Programa de Pós-Graduação em Engenharia e Ciência de Materiais, Campus do Pici, Bloco 729, 60.440-554, Fortaleza, Brazil
2 shared publications - Luana Damasceno
Grupo de Inovações Tecnológicas e Especialidades Químicas, Departamento de Engenharia Mecânica, Universidade Federal do Ceará, Campus do Pici, Bl. 714, Fortaleza 60440-554, Brazil
2 shared publications - Luciana Medeiros Bertini
Instituto Federal do Rio Grande do Norte
2 shared publications - Rosali Barbosa Marques
Fundação Núcleo de Tecnologia Industrial do Ceará, Laboratório de Referência em Biocombustíveis, Rua Prof. Rômulo Proença, 60440-552, Fortaleza, Brazil
2 shared publications
Latest Publications
- Open Access
1H NMR and UV-Vis as Analytical Techniques to Evaluate Biodiesel Conversion and Oxidative Stability
The present study evaluated the applicability of 1H NMR and UV-Vis spectroscopies as analytical techniques for the characterization and determination of biodiesel conversion and for monitoring the oxidative stability of biodiesel samples with antioxidants. For this study, safflower and babassu biodiesels were obtained through transesterification, and physicochemical properties confirmed the success of both reactions. A bench-top accelerated oxidation system was used as an alternative to the Rancimat® method, with samples of 6.0 g heated at 110 ± 5 °C and collected every 2 h for 12 h. The agreement for biodiesel conversions was good, with divergences between 2% and 0.4% for safflower biodiesel and 1.9% for babassu biodiesel. As for UV-Vis spectroscopy, the technique showed the same trend as the Rancimat® method, showing efficiency in evaluating the oxidative stability of safflower biodiesel and in the performance of antioxidants BHT and DMP-30. The accuracy of NMR signals integration for mixtures of safflower oil and safflower biodiesel and the use of UV-Vis spectroscopy associated with a bench-top accelerated oxidation system to investigate the performance of phenolic and amine antioxidants in safflower and babassu biodiesel were explored for the first time, showing results close to the standard methods. Therefore, 1H NMR and UV-Vis spectroscopies could be applied as alternatives to the GC and Rancimat® methods to determine conversion and monitor the oxidative stability of biodiesel rapidly and practically.
Open Access1H NMR and UV-Vis as Analytical Techniques to Evaluate Biodiesel Conversion and Oxidative Stability
The present study evaluated the applicability of 1H NMR and UV-Vis spectroscopies as analytical techniques for the characterization and determination of biodiesel conversion and for monitoring the oxidative stability of biodiesel samples with antioxidants. For this study, safflower and babassu biodiesels were obtained through transesterification, and physicochemical properties confirmed the success of both reactions. A bench-top accelerated oxidation system was used as an alternative to the Rancimat® method, with samples of 6.0 g heated at 110 ± 5 °C and collected every 2 h for 12 h. The agreement for biodiesel conversions was good, with divergences between 2% and 0.4% for safflower biodiesel and 1.9% for babassu biodiesel. As for UV-Vis spectroscopy, the technique showed the same trend as the Rancimat® method, showing efficiency in evaluating the oxidative stability of safflower biodiesel and in the performance of antioxidants BHT and DMP-30. The accuracy of NMR signals integration for mixtures of safflower oil and safflower biodiesel and the use of UV-Vis spectroscopy associated with a bench-top accelerated oxidation system to investigate the performance of phenolic and amine antioxidants in safflower and babassu biodiesel were explored for the first time, showing results close to the standard methods. Therefore, 1H NMR and UV-Vis spectroscopies could be applied as alternatives to the GC and Rancimat® methods to determine conversion and monitor the oxidative stability of biodiesel rapidly and practically.
- Open Access
- 9 August 2023
- Published by LIDSEN Publishing Inc in Advances in Environmental and Engineering Research
- Vol. 04 (03) , 1-13
Carnauba Straw as Feedstock for Solid Biofuel Production
Carnauba straw (Copernicia prunifera), residual biomass derived from wax extraction, was evaluated as a potential feedstock for bioenergy production. The characterization was carried out using elemental analysis, proximate analysis, Higher Heating Value (HHV), FTIR spectroscopy, SEM, and FRX. The carbonization, using a Muffle Furnace, was applied as a thermal conversion technique to improve the fixed carbon content, and preliminary densification was done to assess the potential for future production of briquettes. The C, H, N, O, and S percentages were 44.43%, 5.34%, 2.25%, 46.17%, and 1.81%, respectively. The percentage of fixed carbon (14.17%) increased to 31.10% (250°C) and 35.68% (300°C) after carbonization. At 400°C, the HHV presented a decrease of 9.62%, and ash content increased by 177.66%. FTIR spectra showed bands characteristic of hemicellulose, cellulose, and lignin at 3414 - 3393 cm-1 (O-H) and decrease of absorbance of 74.01% to 81.37% after carbonization; 1738 – 1603 cm-1 (C=O), with reduction in the order of 73.94% to 78.31%, and 48.97% to 73.76%, when compared to the absorbances of the biomass in nature. The SEM of the carnauba straw in nature presented the main structural components (cellulose, lignin, and hemicellulose). After carbonization, evidence of degradation and coal formation was observed, which corroborates with the decrease in the HHV and increase of ash. The FRX was inserted in the SEM images, and the elements detected were Ca, K, and S. The quantities and order of abundance in biomass natural and carbonized were compatible with other biomasses used as biofuel. The carnauba straw in natural and carbonized was densified to understand the characteristics of the compacted material. The sample carbonized at 300°C presented a solid with the potential for future production of briquettes. All results follow other reported biomasses and could lead to further investigation of the carnauba straw as feedstock for solid fuel production without or in a mixture with other agricultural residues.
- 9 August 2023
- Published by LIDSEN Publishing Inc in Advances in Environmental and Engineering Research
- Vol. 04 (03) , 1-13
Open AccessCarnauba Straw as Feedstock for Solid Biofuel Production
Carnauba straw (Copernicia prunifera), residual biomass derived from wax extraction, was evaluated as a potential feedstock for bioenergy production. The characterization was carried out using elemental analysis, proximate analysis, Higher Heating Value (HHV), FTIR spectroscopy, SEM, and FRX. The carbonization, using a Muffle Furnace, was applied as a thermal conversion technique to improve the fixed carbon content, and preliminary densification was done to assess the potential for future production of briquettes. The C, H, N, O, and S percentages were 44.43%, 5.34%, 2.25%, 46.17%, and 1.81%, respectively. The percentage of fixed carbon (14.17%) increased to 31.10% (250°C) and 35.68% (300°C) after carbonization. At 400°C, the HHV presented a decrease of 9.62%, and ash content increased by 177.66%. FTIR spectra showed bands characteristic of hemicellulose, cellulose, and lignin at 3414 - 3393 cm-1 (O-H) and decrease of absorbance of 74.01% to 81.37% after carbonization; 1738 – 1603 cm-1 (C=O), with reduction in the order of 73.94% to 78.31%, and 48.97% to 73.76%, when compared to the absorbances of the biomass in nature. The SEM of the carnauba straw in nature presented the main structural components (cellulose, lignin, and hemicellulose). After carbonization, evidence of degradation and coal formation was observed, which corroborates with the decrease in the HHV and increase of ash. The FRX was inserted in the SEM images, and the elements detected were Ca, K, and S. The quantities and order of abundance in biomass natural and carbonized were compatible with other biomasses used as biofuel. The carnauba straw in natural and carbonized was densified to understand the characteristics of the compacted material. The sample carbonized at 300°C presented a solid with the potential for future production of briquettes. All results follow other reported biomasses and could lead to further investigation of the carnauba straw as feedstock for solid fuel production without or in a mixture with other agricultural residues.
- Open Access
Evaluation of Babassu Cake Generated in the Extraction of the Oil as Feedstock for Biofuel Production
The growing demand for energy and the concern about environmental impacts reinforce the necessity for renewable energy sources such as biofuels. In this study, cake generated in the babassu oil extraction was evaluated as a potential feedstock for solid biofuel production, and it contains a blend of cashew nutshell, sugarcane bagasse, carnauba straw, and carnauba stalk. All samples were characterized by proximate analysis and Higher Heating Value. Carbonization was used to improve energy performance and compaction to understand the mechanism and the characteristics of the biomasses compacted. In the extraction of babassu oil, fresh and aged (90 days) kernel samples were used. The fresh samples reached a yield of 59.8%, and the aged samples reached a yield of 70.66%. The carbonization of babassu cake was carried out in a Muffle furnace at temperatures of 250, 300, 350, and 400 °C. The fresh babassu cake showed an HHV of 23.06 MJ kg−1 and after carbonization of 28.07 (250 °C), 30.69 (300 °C), 28.24 (350 °C), and 18.27 MJ kg−1 (400 °C). At 400 °C, a decrease in HHV of 20.8% occurred, and an increase in Ash (%) of 195% occurred. Proximate analysis showed that biomasses are compatible, with some having a higher compatibility than other biological materials already used as fuels in the industry.
Open AccessEvaluation of Babassu Cake Generated in the Extraction of the Oil as Feedstock for Biofuel Production
The growing demand for energy and the concern about environmental impacts reinforce the necessity for renewable energy sources such as biofuels. In this study, cake generated in the babassu oil extraction was evaluated as a potential feedstock for solid biofuel production, and it contains a blend of cashew nutshell, sugarcane bagasse, carnauba straw, and carnauba stalk. All samples were characterized by proximate analysis and Higher Heating Value. Carbonization was used to improve energy performance and compaction to understand the mechanism and the characteristics of the biomasses compacted. In the extraction of babassu oil, fresh and aged (90 days) kernel samples were used. The fresh samples reached a yield of 59.8%, and the aged samples reached a yield of 70.66%. The carbonization of babassu cake was carried out in a Muffle furnace at temperatures of 250, 300, 350, and 400 °C. The fresh babassu cake showed an HHV of 23.06 MJ kg−1 and after carbonization of 28.07 (250 °C), 30.69 (300 °C), 28.24 (350 °C), and 18.27 MJ kg−1 (400 °C). At 400 °C, a decrease in HHV of 20.8% occurred, and an increase in Ash (%) of 195% occurred. Proximate analysis showed that biomasses are compatible, with some having a higher compatibility than other biological materials already used as fuels in the industry.