Sheetal Gonsalves
Research Subjects
Research Interests
Sheetal Gonsalves has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Swapna Gabbur
Mukesh Patel School of Technology Management & Engineering, SVKM’s NMIMS
2 shared publications - Anish Gharat
MPSTME, NMIMS,Data Science,Mumbai,India
1 shared publication - Kruttika Abhyankar
MPSTME, NMIMS,Mumbai,India
1 shared publication - Snehee Chheda
MPSTME, NMIMS,Data Science,Mumbai,India
1 shared publication Swapna Gabbur
1 shared publicationSwapnaa G.
Department of Basic Science & Humanities, MPSTME, SVKM’s NMIMS, Mumbai-56, Maharashtra, India
1 shared publication
Latest Publications
- 16 March 2025
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 25 (Special A) , S9-S15
Enhancing convective heat transfer in engine oil: a comparative study of various nanoparticles
The study explores heat transfer properties of five different nanofluid flows past an oil cooling system. The numerical investigation is carried out by developing mathematical model by utilising nanofluids volume fraction in engine oil based nanofluid containing solid particles of molybdenum disulfide (MoS2), aluminium oxide (Al2O3), titanium oxide (TiO2), graphene oxide (GO), and copper (Cu). The system of PDE is converted to ODE using appropriate similarity transformations and then solved by employing the FEM. The influence of different nanoparticles on temperature and velocity distributions are analysed graphically. Additionally, the impact of various nanoparticles for the key parameters on the rate of heat transfer and coefficient of skin friction are presented in tabular form. The GO nanoparticles suspended in engine oil exhibit the comparatively lowest temperature and skin friction coefficient, and highest heat transfer capabilities. It may therefore be considered as the best lubricant for engines as it offers low friction and temperature, potentially extending the engine component's lifespan.
- 16 March 2025
- Published by Society for Structural Integrity and Life "Prof. dr Stojan Sedmak" in Structural Integrity and Life
- Vol. 25 (Special A) , S9-S15
Enhancing convective heat transfer in engine oil: a comparative study of various nanoparticles
The study explores heat transfer properties of five different nanofluid flows past an oil cooling system. The numerical investigation is carried out by developing mathematical model by utilising nanofluids volume fraction in engine oil based nanofluid containing solid particles of molybdenum disulfide (MoS2), aluminium oxide (Al2O3), titanium oxide (TiO2), graphene oxide (GO), and copper (Cu). The system of PDE is converted to ODE using appropriate similarity transformations and then solved by employing the FEM. The influence of different nanoparticles on temperature and velocity distributions are analysed graphically. Additionally, the impact of various nanoparticles for the key parameters on the rate of heat transfer and coefficient of skin friction are presented in tabular form. The GO nanoparticles suspended in engine oil exhibit the comparatively lowest temperature and skin friction coefficient, and highest heat transfer capabilities. It may therefore be considered as the best lubricant for engines as it offers low friction and temperature, potentially extending the engine component's lifespan.
- 16 April 2024
- Published by Taylor & Francis in Numerical Heat Transfer, Part B: Fundamentals
- Vol. 87 (1)
FEM study of blood gold electrically conducting micropolar nanofluid flow within a permeable channel
- 16 April 2024
- Published by Taylor & Francis in Numerical Heat Transfer, Part B: Fundamentals
- Vol. 87 (1)
FEM study of blood gold electrically conducting micropolar nanofluid flow within a permeable channel
- Open Access
- 6 October 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 430, 01248
Heat Transfer Analysis using Finite Element Method under Convective Boundary Condition
The model in this study scrutinizes the effect of convective boundary conditions on the flow of a nanofluid across permeable flat plate. The fundamental equations get altered into a nonlinear form through choosing appropriate similarity transformations. In the process, they are solved mathematically by substantiated FEM code through use of variational finite element method. The outcomes clearly show the characteristics of relevant parameters such as temperature and velocity profiles. When the numerical analysis is evaluated in context of formerly published information, the reliability of the numerical code is conformed. Its found that there is a surge in thermal conductivity when proportion of nanoparticles rises in the fluid. Permeability of plate has a significant influence on the heat transfer and skin friction. The investigation supports the possibility of extending the work to flows of non-Newtonian fluid, three dimensional and for consideration of pressure gradients on arbitrary surfaces. The results practically aid the design of heat transfer systems for futuristic technology involving heat enhancement.
- 6 October 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 430, 01248
Open AccessHeat Transfer Analysis using Finite Element Method under Convective Boundary Condition
The model in this study scrutinizes the effect of convective boundary conditions on the flow of a nanofluid across permeable flat plate. The fundamental equations get altered into a nonlinear form through choosing appropriate similarity transformations. In the process, they are solved mathematically by substantiated FEM code through use of variational finite element method. The outcomes clearly show the characteristics of relevant parameters such as temperature and velocity profiles. When the numerical analysis is evaluated in context of formerly published information, the reliability of the numerical code is conformed. Its found that there is a surge in thermal conductivity when proportion of nanoparticles rises in the fluid. Permeability of plate has a significant influence on the heat transfer and skin friction. The investigation supports the possibility of extending the work to flows of non-Newtonian fluid, three dimensional and for consideration of pressure gradients on arbitrary surfaces. The results practically aid the design of heat transfer systems for futuristic technology involving heat enhancement.
- 31 August 2023
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 41 (4) , 959-968
Convective Heat Transfer of Radiating Magneto-Micropolar Nanofluid Flow
- 31 August 2023
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 41 (4) , 959-968
Convective Heat Transfer of Radiating Magneto-Micropolar Nanofluid Flow
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Case Study On Transport Of Petroleum In Nigerian Cities
Every company in today's time intends to maximize their profits. As we are in a fast-growing world, the need for products has increased drastically. Price of products depends on majorly two things, the cost of production (including transportation costs) and profit margins. Transportation problems are used to either minimize transportation cost or to maximize profits on shipping commodities. In this paper, we focus on how to minimize transportation cost while fulfilling the supply and demand conditions. The problem taken by us contain 3 sources and 3 destinations based in Nigeria and the Cost matrix was converted from Nigerian currency (Naira) to Dollars (conversion done according to rates on 15th October, 2022) for ease of calculation. Using Vogel's Approximation Method (VAM), Least Cost Method (LCM) and the North-West Corner Method (NWCM), we found that VAM was the most optimal. Self-written Python codes were used to verify the manual solutions. The unavailable or forbidden routes have also been considered in the code. The output displayed the allocations for the 3x3 matrix, and printed the total cost. After this, MS-Excel and Excel-QM software were used for verification. We found that VAM is 25.11 percent better than the LCM and 52.65 percent better than the NWCM for this problem. In every enterprise, generating higher revenue remains one of the most essential objectives. If codes for such methods are made universally available, enterprises would benefit highly. Use of transportation problems for optimal solutions have great potential, if one has knowledge about them.
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Case Study On Transport Of Petroleum In Nigerian Cities
Every company in today's time intends to maximize their profits. As we are in a fast-growing world, the need for products has increased drastically. Price of products depends on majorly two things, the cost of production (including transportation costs) and profit margins. Transportation problems are used to either minimize transportation cost or to maximize profits on shipping commodities. In this paper, we focus on how to minimize transportation cost while fulfilling the supply and demand conditions. The problem taken by us contain 3 sources and 3 destinations based in Nigeria and the Cost matrix was converted from Nigerian currency (Naira) to Dollars (conversion done according to rates on 15th October, 2022) for ease of calculation. Using Vogel's Approximation Method (VAM), Least Cost Method (LCM) and the North-West Corner Method (NWCM), we found that VAM was the most optimal. Self-written Python codes were used to verify the manual solutions. The unavailable or forbidden routes have also been considered in the code. The output displayed the allocations for the 3x3 matrix, and printed the total cost. After this, MS-Excel and Excel-QM software were used for verification. We found that VAM is 25.11 percent better than the LCM and 52.65 percent better than the NWCM for this problem. In every enterprise, generating higher revenue remains one of the most essential objectives. If codes for such methods are made universally available, enterprises would benefit highly. Use of transportation problems for optimal solutions have great potential, if one has knowledge about them.