Zhihong Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhihong Liu has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Aijuan Zhou
Taiyuan University of Technology
15 shared publications Xiuping Yue
Taiyuan University of Technology
13 shared publications- Xianbao Xu
Taiyuan University of Technology
9 shared publications - Wenzong Liu
Harbin Institute of Technology Shenzhen
6 shared publications Haifeng Qiang
Taiyuan University of Technology
5 shared publicationsWenzong Liu
School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen, Shenzhen 518055, China
5 shared publications
Latest Publications
- Open Access
- 4 October 2026
- Published by MDPI AG in Fermentation
- Vol. 12 (10) , 470
3D-Printed Hierarchical Porous MgAl-Layered Double Hydroxide/Sodium Alginate Monoliths for Efficient Recovery of Volatile Fatty Acids from Anaerobic Fermentation Broth
Recovering volatile fatty acids (VFAs) from anaerobic fermentation broth as preferred carbon sources is often hindered by the poor recoverability of powdered adsorbents and the slow mass transfer within conventional hydrogel beads. Herein, we report a MgAl-layered double hydroxide (LDH) and sodium alginate (SA) composite ink tailored for extrusion-based 3D printing, followed by Ca2+ crosslinking and freeze-drying to fabricate monolithic adsorbents. Rheological tests show that the ink exhibits shear-thinning behavior and elastic-dominated viscoelasticity (G′ > G″), ensuring smooth extrusion and high shape fidelity during printing. Under optimized conditions (25 °C, 3.0 g/L, 120 min, pH 7.0), the 3D-printed monolith removed 55.74% of total VFAs. Kinetic analysis reveals that the adsorption follows the pseudo-second-order model (R2 = 0.915), consistent with a chemically controlled adsorption contribution and yielding a calculated equilibrium capacity of 286.5 mg/g. Notably, the adsorbent exhibits a pronounced selectivity toward acetic acid, which accounts for 62% of the total adsorbed VFAs. These findings demonstrate that 3D printing offers a viable strategy to overcome the intrinsic limitations of LDH-based adsorbents, namely, difficult separation and limited internal diffusion, thereby enabling efficient and selective VFA recovery from complex fermentation streams.
- 4 October 2026
- Published by MDPI AG in Fermentation
- Vol. 12 (10) , 470
Open Access3D-Printed Hierarchical Porous MgAl-Layered Double Hydroxide/Sodium Alginate Monoliths for Efficient Recovery of Volatile Fatty Acids from Anaerobic Fermentation Broth
Recovering volatile fatty acids (VFAs) from anaerobic fermentation broth as preferred carbon sources is often hindered by the poor recoverability of powdered adsorbents and the slow mass transfer within conventional hydrogel beads. Herein, we report a MgAl-layered double hydroxide (LDH) and sodium alginate (SA) composite ink tailored for extrusion-based 3D printing, followed by Ca2+ crosslinking and freeze-drying to fabricate monolithic adsorbents. Rheological tests show that the ink exhibits shear-thinning behavior and elastic-dominated viscoelasticity (G′ > G″), ensuring smooth extrusion and high shape fidelity during printing. Under optimized conditions (25 °C, 3.0 g/L, 120 min, pH 7.0), the 3D-printed monolith removed 55.74% of total VFAs. Kinetic analysis reveals that the adsorption follows the pseudo-second-order model (R2 = 0.915), consistent with a chemically controlled adsorption contribution and yielding a calculated equilibrium capacity of 286.5 mg/g. Notably, the adsorbent exhibits a pronounced selectivity toward acetic acid, which accounts for 62% of the total adsorbed VFAs. These findings demonstrate that 3D printing offers a viable strategy to overcome the intrinsic limitations of LDH-based adsorbents, namely, difficult separation and limited internal diffusion, thereby enabling efficient and selective VFA recovery from complex fermentation streams.
- 22 September 2026
- Published by American Chemical Society (ACS) in ACS ES&T Engineering
- Vol. 6 (11) , 3007-3023
Advances in Medium-Chain Fatty Acids Production from Biowastes: Process Engineering Strategies and Mechanism
The rapid accumulation of biowastes has intensified the need for advanced biorefinery technologies to valorize organic residues into high-value recyclable carbon resources. Chain elongation (CE) offers a promising route for upgrading low-value biowaste-derived substrates into high-value medium-chain fatty acids (MCFAs). However, the broader implementation of CE is still constrained by several unresolved issues, including the interaction of the operating parameters in various technologies, the poorly quantified contribution of competing metabolic pathways and insufficient integration between production and product recovery. This review critically synthesizes recent advances in MCFA production from biowastes by linking biochemical mechanisms, microbial communities, process platforms, and operational regulation. The prevailing technologies, e.g., anaerobic fermentation, electro-fermentation and microbial electrosynthesis, as well as to the effects of substrates, electron donors, pH, temperature, hydraulic retention time, hydrogen partial pressure and inhibitor management. Ultimately, this review discusses the core challenges and prospective engineering directions, covering in-depth mechanism interpretation, low-cost efficiency promotion strategies, stable long-term operational maintenance, as well as integrated production and product recovery modes. This review establishes a process-oriented theoretical framework for optimizing circular economy-driven MCFA biosynthesis, and offers theoretical support for the future construction and industrial advancement of biowaste-oriented circular biorefinery systems.
- 22 September 2026
- Published by American Chemical Society (ACS) in ACS ES&T Engineering
- Vol. 6 (11) , 3007-3023
Advances in Medium-Chain Fatty Acids Production from Biowastes: Process Engineering Strategies and Mechanism
The rapid accumulation of biowastes has intensified the need for advanced biorefinery technologies to valorize organic residues into high-value recyclable carbon resources. Chain elongation (CE) offers a promising route for upgrading low-value biowaste-derived substrates into high-value medium-chain fatty acids (MCFAs). However, the broader implementation of CE is still constrained by several unresolved issues, including the interaction of the operating parameters in various technologies, the poorly quantified contribution of competing metabolic pathways and insufficient integration between production and product recovery. This review critically synthesizes recent advances in MCFA production from biowastes by linking biochemical mechanisms, microbial communities, process platforms, and operational regulation. The prevailing technologies, e.g., anaerobic fermentation, electro-fermentation and microbial electrosynthesis, as well as to the effects of substrates, electron donors, pH, temperature, hydraulic retention time, hydrogen partial pressure and inhibitor management. Ultimately, this review discusses the core challenges and prospective engineering directions, covering in-depth mechanism interpretation, low-cost efficiency promotion strategies, stable long-term operational maintenance, as well as integrated production and product recovery modes. This review establishes a process-oriented theoretical framework for optimizing circular economy-driven MCFA biosynthesis, and offers theoretical support for the future construction and industrial advancement of biowaste-oriented circular biorefinery systems.
- 4 September 2026
- Published by American Chemical Society (ACS) in ACS ES&T Engineering
- Vol. 6 (11) , 3110-3125
Synergistic Regulation of Homoacetogenesis and Electrochemical Electron Supply Enhances CO2-Assisted Caproate Production from Waste Activated Sludge
Municipal sewage treatment has become an energy-intensive sector associated with substantial CO2 emissions and waste activated sludge (WAS) generation. Chain elongation (CE), as a promising carbon resource recovery route, enables the conversion of sludge-derived short-chain fatty acids into medium-chain fatty acids (MCFAs). This study developed a microbial electrolysis system (MES) to couple CO2 utilization with caproate production from prefermented WAS, while chloroform and 2-bromoethanesulfonic acid were applied to regulate methanogenesis and homoacetogenesis. CO2 promoted caproate synthesis only under closed-circuit conditions, indicating that its positive role depended on electrochemical electron supply rather than simple substrate addition. The closed-circuit MES with chloroform and CO2 addition achieved the highest caproate concentration, yield, and selectivity, reaching 3092.9 ± 73.1 mg COD/L, 0.66 g COD/g COD, and 58.06%. Compared with 2-bromoethanesulfonic acid, chloroform more effectively inhibited homoacetogens, thereby reducing the diversion of CO2 and H2 toward acetate accumulation and redirecting carbon and reducing equivalents toward caproate formation. Electrochemical analyses confirmed enhanced cathodic biofilm activity, as indicated by the lowest charge transfer resistance of 2.401 Ω. Microbial and functional pathway analyses revealed the enrichment of electroactive and chain-elongating bacteria and the high abundance of key genes involved in the Wood-Ljungdahl pathway, acetyl-CoA generation, fatty acid biosynthesis, and reverse β-oxidation. These findings provide a low-carbon strategy for synergistic CO2 utilization and high-value WAS upgrading.
- 4 September 2026
- Published by American Chemical Society (ACS) in ACS ES&T Engineering
- Vol. 6 (11) , 3110-3125
Synergistic Regulation of Homoacetogenesis and Electrochemical Electron Supply Enhances CO2-Assisted Caproate Production from Waste Activated Sludge
Municipal sewage treatment has become an energy-intensive sector associated with substantial CO2 emissions and waste activated sludge (WAS) generation. Chain elongation (CE), as a promising carbon resource recovery route, enables the conversion of sludge-derived short-chain fatty acids into medium-chain fatty acids (MCFAs). This study developed a microbial electrolysis system (MES) to couple CO2 utilization with caproate production from prefermented WAS, while chloroform and 2-bromoethanesulfonic acid were applied to regulate methanogenesis and homoacetogenesis. CO2 promoted caproate synthesis only under closed-circuit conditions, indicating that its positive role depended on electrochemical electron supply rather than simple substrate addition. The closed-circuit MES with chloroform and CO2 addition achieved the highest caproate concentration, yield, and selectivity, reaching 3092.9 ± 73.1 mg COD/L, 0.66 g COD/g COD, and 58.06%. Compared with 2-bromoethanesulfonic acid, chloroform more effectively inhibited homoacetogens, thereby reducing the diversion of CO2 and H2 toward acetate accumulation and redirecting carbon and reducing equivalents toward caproate formation. Electrochemical analyses confirmed enhanced cathodic biofilm activity, as indicated by the lowest charge transfer resistance of 2.401 Ω. Microbial and functional pathway analyses revealed the enrichment of electroactive and chain-elongating bacteria and the high abundance of key genes involved in the Wood-Ljungdahl pathway, acetyl-CoA generation, fatty acid biosynthesis, and reverse β-oxidation. These findings provide a low-carbon strategy for synergistic CO2 utilization and high-value WAS upgrading.
- 16 July 2026
- Published by Elsevier in Bioresource Technology
- Vol. 461, 135425
N-(3-oxohexanoyl)-homoserine lactone-assisted enrichment reshapes functional microbial consortia for chain elongation in electrofermentation
- 16 July 2026
- Published by Elsevier in Bioresource Technology
- Vol. 461, 135425
N-(3-oxohexanoyl)-homoserine lactone-assisted enrichment reshapes functional microbial consortia for chain elongation in electrofermentation
- 27 May 2026
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 74 (22) , 16837-16856
Recent Advances in Butyrate Production from Food Waste Fermentation: Key Functional Microbes, Habitat Engineering, and Future Challenges
The global food waste (FW) problem is becoming increasingly severe, and efficiently converting it into high-value chemicals is crucial for promoting the circular economy. Butyrate, as a multifunctional short-chain fatty acid, has broad application prospects. This review systematically summarizes the research progress on butyrate production from FW via anaerobic fermentation. In particular, a comprehensive review was conducted of the core butyrate-producing microbial communities, which have not been systematically summarized in the existing literature,. The article points out that despite significant advancements in this field, challenges such as improving the selectivity and yield of butyrate, understanding complex microbial interaction mechanisms, reducing downstream separation costs, and expanding high-value application pathways remain critical barriers to industrial implementation. This review aims to integrate existing research insights to provide systematic theoretical support and technical references for the resource-oriented upgrading of FW and the green, efficient biomanufacturing of butyrate.
- 27 May 2026
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 74 (22) , 16837-16856
Recent Advances in Butyrate Production from Food Waste Fermentation: Key Functional Microbes, Habitat Engineering, and Future Challenges
The global food waste (FW) problem is becoming increasingly severe, and efficiently converting it into high-value chemicals is crucial for promoting the circular economy. Butyrate, as a multifunctional short-chain fatty acid, has broad application prospects. This review systematically summarizes the research progress on butyrate production from FW via anaerobic fermentation. In particular, a comprehensive review was conducted of the core butyrate-producing microbial communities, which have not been systematically summarized in the existing literature,. The article points out that despite significant advancements in this field, challenges such as improving the selectivity and yield of butyrate, understanding complex microbial interaction mechanisms, reducing downstream separation costs, and expanding high-value application pathways remain critical barriers to industrial implementation. This review aims to integrate existing research insights to provide systematic theoretical support and technical references for the resource-oriented upgrading of FW and the green, efficient biomanufacturing of butyrate.
- 20 April 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (17) , 8342-8353
Unveiling the Dual Role of Eggshell as a pH Buffer and Calcium-Driven Promoter for Enhanced Caproate Production via Two-Stage Anaerobic Fermentation
- 20 April 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (17) , 8342-8353
Unveiling the Dual Role of Eggshell as a pH Buffer and Calcium-Driven Promoter for Enhanced Caproate Production via Two-Stage Anaerobic Fermentation
- Top Cited Papers
- 20 March 2026
- Published by Elsevier in Water Research
- Vol. 298, 125790
New insights into the interplay between chain elongation and homoacetogenesis in microbial electrosynthesis: Chloroform-enhanced medium-chain carboxylate production
- 20 March 2026
- Published by Elsevier in Water Research
- Vol. 298, 125790
Top Cited PapersNew insights into the interplay between chain elongation and homoacetogenesis in microbial electrosynthesis: Chloroform-enhanced medium-chain carboxylate production
- 13 March 2026
- Published by Elsevier in Environmental Research
- Vol. 298, 124248
Sustainable hydrogen and vivianite recovery from waste activated sludge in electro-fermentation: Perspectives of product regulation and microbial interaction
- 13 March 2026
- Published by Elsevier in Environmental Research
- Vol. 298, 124248
Sustainable hydrogen and vivianite recovery from waste activated sludge in electro-fermentation: Perspectives of product regulation and microbial interaction