Maksym Halochkin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maksym Halochkin has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Iryna Zayats
Department of Photogrammetry and Geoinformation, Institute of Geodesy, Lviv Polytechnic National University, 79013 Lviv, Ukraine
2 shared publications - Khrystyna Burshtynska
Department of Photogrammetry and Geoinformation, Institute of Geodesy, Lviv Polytechnic National University, 79013 Lviv, Ukraine
2 shared publications - Krzysztof Bakuła
Department of Photogrammetry, Remote Sensing and Spatial Information Systems, Faculty of Geodesy and Cartography, Warsaw University of Technology, Warsaw, Poland
1 shared publication - Lyubov Babiy
Department of Photogrammetry and Geoinformation, Institute of Geodesy, Lviv Polytechnic National University, 79013 Lviv, Ukraine
1 shared publication - Norbert Pfeifer
Department of Geodesy and Geoinformation, TU Wien, Vienna, Austria
1 shared publication - Svitlana Kokhan
Scientific Centre for Aerospace Research of the Earth of the Institute of Geological Sciences of the NAS of Ukraine
1 shared publication
Latest Publications
- Open Access
The Influence of the Main Factors on the Accuracy of Hydrological Modelling of Flooded Lands
This paper proposes a general methodological approach to hydrological modeling for determining the areas of flooded land in the plain part of the Dniester riverbed, the second largest river in Ukraine. The purpose of the study is the selection of parameters for modeling flooded zones in the plain section of the Dniester riverbed, taking into account the rising water level caused by the freshet that occurred in the western part of Ukraine on 22–24 June 2020. The proposed study examines the workflow of hydrological modeling of the flooded land zone and the main components of this scheme: the construction of the DTM, considering the roughness of the riparian territory by Manning’s coefficients, and indications of water rise. In the experiment, the influence of DTM reproduction resolution and Manning coefficients was analyzed, and their optimal values were selected, which allowed obtaining the parameters of hydrological modeling with a higher probability. The identified flooding areas were tested using a high-resolution space image during the flood in June 2020. The distance between the profiles affects not only the value of the modeling area but also their detail. The accuracy of the modeled flooded area is 5.1% for a 5 m interval between the profiles, 6.9% for 50 m, 8.2% for 100 m, and 10.8% for 200 m. These results allow determining the degree of influence of the distance between intervals on the modeling accuracy. Using different values of Manning’s coefficients for individual sections with different bedding surfaces and the selected spacing between profiles, which was 50 m, the accuracy of the modeling was investigated. After the modelling, the simulated flood areas were obtained in vector form, which allows for determining their areas and comparing them with the test flooded area. In the presented research, the RMSE of determining the flooded areas is about 5%. The test area of 600.6 hectares was determined with an accuracy of 0.8%.
Open AccessThe Influence of the Main Factors on the Accuracy of Hydrological Modelling of Flooded Lands
This paper proposes a general methodological approach to hydrological modeling for determining the areas of flooded land in the plain part of the Dniester riverbed, the second largest river in Ukraine. The purpose of the study is the selection of parameters for modeling flooded zones in the plain section of the Dniester riverbed, taking into account the rising water level caused by the freshet that occurred in the western part of Ukraine on 22–24 June 2020. The proposed study examines the workflow of hydrological modeling of the flooded land zone and the main components of this scheme: the construction of the DTM, considering the roughness of the riparian territory by Manning’s coefficients, and indications of water rise. In the experiment, the influence of DTM reproduction resolution and Manning coefficients was analyzed, and their optimal values were selected, which allowed obtaining the parameters of hydrological modeling with a higher probability. The identified flooding areas were tested using a high-resolution space image during the flood in June 2020. The distance between the profiles affects not only the value of the modeling area but also their detail. The accuracy of the modeled flooded area is 5.1% for a 5 m interval between the profiles, 6.9% for 50 m, 8.2% for 100 m, and 10.8% for 200 m. These results allow determining the degree of influence of the distance between intervals on the modeling accuracy. Using different values of Manning’s coefficients for individual sections with different bedding surfaces and the selected spacing between profiles, which was 50 m, the accuracy of the modeling was investigated. After the modelling, the simulated flood areas were obtained in vector form, which allows for determining their areas and comparing them with the test flooded area. In the presented research, the RMSE of determining the flooded areas is about 5%. The test area of 600.6 hectares was determined with an accuracy of 0.8%.
- Open Access
- 15 February 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (4) , 1071
Hydrological Modeling for Determining Flooded Land from Unmanned Aerial Vehicle Images—Case Study at the Dniester River
In recent decades, in the Pre-Carpathian region of Ukraine during the summer period, floods and flood events became more frequent. They were accompanied by significant economic and environmental loss. Especially powerful were the floods of 2008 and 2020, but the floods in 2014 and 2016 also had destructive consequences. Therefore, the study of river channel processes, river stability and assessment of flooded land areas due to floods is an urgent problem. The aim of the study is to propose a methodology for hydrological modeling of sections of riverbeds with complex morphometric and hydrological characteristics. The construction of a digital elevation model (DEM) and the selection of the distance between the cross-sections, as well as the determination of the Manning coefficients, have the greatest impact on the accuracy of the modeling, so these factors should be given maximum weight when calibrating the model. The object of the study was the section of the Dniester River in Ukraine in the place of transition from the foothill part of the channel to the hilly–marshy part with complex meandering and significant shifts of the river. The methodology of hydrological modeling includes three principal components: construction of the DEM, determination of the type of underlying surface and determination of the level of water rise in the riverbed. The research was carried out on the basis of imaging from unmanned aerial vehicles (UAVs). In 2017, the imaging of a section of the Dniester riverbed was carried out in the summer during a period of significant vegetation growth, which affected the accuracy of determining the heights of the model points. According to the results of this imaging, the residual mean square (RMS) for determining the heights of the points exceeded the permissible value of the RMS (0.25–0.3 m) by two times. In 2021, imaging was performed in the autumn period when there was no leaf cover. The RMS of the DEM for 2021 imaging was 0.26 m. According to the results of the survey in 2017 and 2021, orthophotoplans were created, which were used to determine the planned displacements of the river bed and clarify the Manning coefficients, which characterize the roughness of the underlying surface. The value of the water level rise was obtained on the basis of the graph on the date of the maximum rise of the water level on 24 June 2020 according to the hydrometeorological station located near the selected area. The result of the research is hydrological modeling using the HEC-RAS module for a site with complex hydrological and morphometric characteristics on the date of the maximum water rise. It was established that in order to achieve the required accuracy of the DEM, imaging should be carried out in the leafless period of the year, since the accuracy of constructing the DEM decreases by half during the growing season. On the basis of the obtained orthophoto plans, a methodology for determining refined Manning coefficients was developed, which allows taking into account changes in the underlying surface of the channel area. The area of the flooded area was calculated based on the level of water rise during the 2020 flood.
- 15 February 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (4) , 1071
Open AccessHydrological Modeling for Determining Flooded Land from Unmanned Aerial Vehicle Images—Case Study at the Dniester River
In recent decades, in the Pre-Carpathian region of Ukraine during the summer period, floods and flood events became more frequent. They were accompanied by significant economic and environmental loss. Especially powerful were the floods of 2008 and 2020, but the floods in 2014 and 2016 also had destructive consequences. Therefore, the study of river channel processes, river stability and assessment of flooded land areas due to floods is an urgent problem. The aim of the study is to propose a methodology for hydrological modeling of sections of riverbeds with complex morphometric and hydrological characteristics. The construction of a digital elevation model (DEM) and the selection of the distance between the cross-sections, as well as the determination of the Manning coefficients, have the greatest impact on the accuracy of the modeling, so these factors should be given maximum weight when calibrating the model. The object of the study was the section of the Dniester River in Ukraine in the place of transition from the foothill part of the channel to the hilly–marshy part with complex meandering and significant shifts of the river. The methodology of hydrological modeling includes three principal components: construction of the DEM, determination of the type of underlying surface and determination of the level of water rise in the riverbed. The research was carried out on the basis of imaging from unmanned aerial vehicles (UAVs). In 2017, the imaging of a section of the Dniester riverbed was carried out in the summer during a period of significant vegetation growth, which affected the accuracy of determining the heights of the model points. According to the results of this imaging, the residual mean square (RMS) for determining the heights of the points exceeded the permissible value of the RMS (0.25–0.3 m) by two times. In 2021, imaging was performed in the autumn period when there was no leaf cover. The RMS of the DEM for 2021 imaging was 0.26 m. According to the results of the survey in 2017 and 2021, orthophotoplans were created, which were used to determine the planned displacements of the river bed and clarify the Manning coefficients, which characterize the roughness of the underlying surface. The value of the water level rise was obtained on the basis of the graph on the date of the maximum rise of the water level on 24 June 2020 according to the hydrometeorological station located near the selected area. The result of the research is hydrological modeling using the HEC-RAS module for a site with complex hydrological and morphometric characteristics on the date of the maximum water rise. It was established that in order to achieve the required accuracy of the DEM, imaging should be carried out in the leafless period of the year, since the accuracy of constructing the DEM decreases by half during the growing season. On the basis of the obtained orthophoto plans, a methodology for determining refined Manning coefficients was developed, which allows taking into account changes in the underlying surface of the channel area. The area of the flooded area was calculated based on the level of water rise during the 2020 flood.