Sneha Kothapally
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sneha Kothapally has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Sushma Kotru
Department of Electrical and Computer Engineering, The University of Alabama 1 , Tuscaloosa, Alabama 35487
5 shared publications - James N. Hilfiker
J. A. Woollam Co., Inc. 2 , 311 S. 7 Street, Lincoln, Nebraska 68508
2 shared publications - Jaber A. Abu Qahouq
Department of Electrical and Computer Engineering, College of Engineering, The University of Alabama, Tuscaloosa, AL 35487, USA
1 shared publication James N. Hilfiker
1 shared publication- Roni Paul
Department of Electrical and Computer Engineering, The University of Alabama , Tuscaloosa, Alabama 35487
1 shared publication
Latest Publications
- 27 August 2024
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 31 (2)
Optical analysis of ferrite films using spectroscopic ellipsometry
This work presents the optical properties of nickel zinc ferrite, nickel copper zinc ferrite, and nickel cobalt zinc ferrite films prepared on Si/SiO2 substrates using the sol-gel and spin-coating technique. A J.A. Woollam Company RC2 model D variable angle spectroscopic ellipsometer was used to measure the amplitude ratio (Ψ) and phase difference (Δ) of the films annealed at two distinct temperatures (500 and 800 °C). Measurements were taken at three incident angles (55°, 65°, and 75°) across the spectral range of 190–1000 nm, with a step size of 1 nm. The acquired data were subjected to modeling using a summation of Kramers–Kronig consistent oscillators to determine the film thickness and complex optical functions (refractive index and extinction coefficient) with a minimized mean-squared error. Additionally, incorporating a surface roughness layer notably enhanced the accuracy, with the roughness described using the Bruggeman effective medium approximation reflecting a 50%–50% mixture between the film's optical constants and those of air (void). The experimental and simulated (Ψ, Δ) spectra as a function of wavelength at angles 55°, 65°, and 75° for the NZF, NCuZF, and NCoZF films annealed at 500 and 800 °C are provided. The refractive index and extinction coefficient values as a function of wavelength for NZF, NCuZF, and NCoZF films annealed at 500 and 800 °C are also included. The elucidated optical properties of these films hold potential for application in various optoelectronic devices, including solar cells.
- 27 August 2024
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 31 (2)
Optical analysis of ferrite films using spectroscopic ellipsometry
This work presents the optical properties of nickel zinc ferrite, nickel copper zinc ferrite, and nickel cobalt zinc ferrite films prepared on Si/SiO2 substrates using the sol-gel and spin-coating technique. A J.A. Woollam Company RC2 model D variable angle spectroscopic ellipsometer was used to measure the amplitude ratio (Ψ) and phase difference (Δ) of the films annealed at two distinct temperatures (500 and 800 °C). Measurements were taken at three incident angles (55°, 65°, and 75°) across the spectral range of 190–1000 nm, with a step size of 1 nm. The acquired data were subjected to modeling using a summation of Kramers–Kronig consistent oscillators to determine the film thickness and complex optical functions (refractive index and extinction coefficient) with a minimized mean-squared error. Additionally, incorporating a surface roughness layer notably enhanced the accuracy, with the roughness described using the Bruggeman effective medium approximation reflecting a 50%–50% mixture between the film's optical constants and those of air (void). The experimental and simulated (Ψ, Δ) spectra as a function of wavelength at angles 55°, 65°, and 75° for the NZF, NCuZF, and NCoZF films annealed at 500 and 800 °C are provided. The refractive index and extinction coefficient values as a function of wavelength for NZF, NCuZF, and NCoZF films annealed at 500 and 800 °C are also included. The elucidated optical properties of these films hold potential for application in various optoelectronic devices, including solar cells.
- Open Access
- 5 February 2024
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 31 (1)
Spectroscopic analysis of lead lanthanum zirconate titanate films using UV-VIS and ellipsometry
Spectroscopic ellipsometry and ultraviolet-visible (UV-VIS) spectrometry were utilized to study the optical properties of ferroelectric lead lanthanum zirconate titanate (PLZT) films. These films were deposited on platinized silicon [Si(100)/ SiO2/TiO2/Pt(111)] substrates using the chemical solution deposition method. Films were annealed at two different temperatures (650 and 750 °C) using rapid thermal annealing. Shimadzu UV-1800 UV-VIS spectrophotometer with a resolution of 1 nm was used to measure the reflectance data in the spectral range of 300–1000 nm with a step size of 1 nm. The bandgap values were determined from the reflectance spectra using appropriate equations. A J.A. Woollam RC2 small spot spectroscopic ellipsometer was used to obtain the change in amplitude (Ψ) and phase (Δ) of polarized light upon reflection from the film surface. The spectra were recorded in the wavelength range of 210–1500 nm at an incident angle of 65°. Refractive index (n) and extinction coefficient (k) were obtained by fitting the spectra (Ψ, Δ) with the appropriate models. No significant changes were observed in the optical constants of PLZT films annealed at 650 and 750 °C. The optical transparency and the strong absorption in the ultraviolet (UV) region of PLZT films make them an attractive material for optoelectronic and UV sensing applications.
- 5 February 2024
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 31 (1)
Open AccessSpectroscopic analysis of lead lanthanum zirconate titanate films using UV-VIS and ellipsometry
Spectroscopic ellipsometry and ultraviolet-visible (UV-VIS) spectrometry were utilized to study the optical properties of ferroelectric lead lanthanum zirconate titanate (PLZT) films. These films were deposited on platinized silicon [Si(100)/ SiO2/TiO2/Pt(111)] substrates using the chemical solution deposition method. Films were annealed at two different temperatures (650 and 750 °C) using rapid thermal annealing. Shimadzu UV-1800 UV-VIS spectrophotometer with a resolution of 1 nm was used to measure the reflectance data in the spectral range of 300–1000 nm with a step size of 1 nm. The bandgap values were determined from the reflectance spectra using appropriate equations. A J.A. Woollam RC2 small spot spectroscopic ellipsometer was used to obtain the change in amplitude (Ψ) and phase (Δ) of polarized light upon reflection from the film surface. The spectra were recorded in the wavelength range of 210–1500 nm at an incident angle of 65°. Refractive index (n) and extinction coefficient (k) were obtained by fitting the spectra (Ψ, Δ) with the appropriate models. No significant changes were observed in the optical constants of PLZT films annealed at 650 and 750 °C. The optical transparency and the strong absorption in the ultraviolet (UV) region of PLZT films make them an attractive material for optoelectronic and UV sensing applications.
- 15 February 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (2) , 023404
Optical studies of pure and (Cu, Co) doped nickel zinc ferrite films deposited on quartz substrate
In this work, the optical properties of pure and doped films were investigated as a function of annealing temperature. Films with compositions Ni0.5Zn0.5Fe2O4, Ni0.35Cu0.2Zn0.45Fe2O4, and Ni0.35Co0.2Zn0.45Fe2O4 were deposited on quartz substrate using the sol–gel method. The grown films were annealed at 500 and 800 °C in a rapid thermal annealing furnace. The single-phase spinel structure of these films was confirmed by x-ray diffraction (XRD) results. The average crystallite size calculated from the XRD data was observed to increase with the annealing temperature and decrease for films doped with Cu and Co. The lattice constant was observed to decrease with the annealing temperature and increase for films doped with Cu and Co. The cross-sectional images obtained from field emission scanning electron microscope were used to calculate the thickness of these films. Ultraviolet-visible spectroscopy was used to obtain the absorbance spectra as a function of wavelength in the range of 200–800 nm. The bandgap obtained from the absorbance spectra was seen to decrease for films annealed at higher temperatures for pure and doped films. Furthermore, the bandgap of doped films was seen to decrease in comparison to that of pure films. Optical parameters such as refractive index, extinction coefficient, optical conductivity, and real and imaginary parts of the dielectric constant were observed to increase with the reduction in the bandgap.
- 15 February 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (2) , 023404
Optical studies of pure and (Cu, Co) doped nickel zinc ferrite films deposited on quartz substrate
In this work, the optical properties of pure and doped films were investigated as a function of annealing temperature. Films with compositions Ni0.5Zn0.5Fe2O4, Ni0.35Cu0.2Zn0.45Fe2O4, and Ni0.35Co0.2Zn0.45Fe2O4 were deposited on quartz substrate using the sol–gel method. The grown films were annealed at 500 and 800 °C in a rapid thermal annealing furnace. The single-phase spinel structure of these films was confirmed by x-ray diffraction (XRD) results. The average crystallite size calculated from the XRD data was observed to increase with the annealing temperature and decrease for films doped with Cu and Co. The lattice constant was observed to decrease with the annealing temperature and increase for films doped with Cu and Co. The cross-sectional images obtained from field emission scanning electron microscope were used to calculate the thickness of these films. Ultraviolet-visible spectroscopy was used to obtain the absorbance spectra as a function of wavelength in the range of 200–800 nm. The bandgap obtained from the absorbance spectra was seen to decrease for films annealed at higher temperatures for pure and doped films. Furthermore, the bandgap of doped films was seen to decrease in comparison to that of pure films. Optical parameters such as refractive index, extinction coefficient, optical conductivity, and real and imaginary parts of the dielectric constant were observed to increase with the reduction in the bandgap.