Peter Russer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peter Russer has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Johannes A. Russer
Chair of Methods of Signal Processing, Technical University of Munich, Munich, Germany
8 shared publications - Michael Haider
TUM School of Computation, Information and Technology, Technical University of Munich, Garching, Germany
5 shared publications - Andrey Baev
Theoretical Radio Engineering Department, Moscow Aviation Institute (National Research University), Moscow, Russian Federation
4 shared publications - Christian Jirauschek
TUM School of Computation, Information and Technology, Technical University of Munich, Garching, Germany
4 shared publications - Yury Kuznetsov
Theoretical Radio Engineering Department, Moscow Aviation Institute (National Research University), Moscow, Russian Federation
4 shared publications - Anastasia Gorbunova
Theoretical Radio Engineering Department, Moscow Aviation Institute (National Research University), Moscow, Russian Federation
2 shared publications
Latest Publications
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 27 (7) , 122-123
Remembering Mauro Mongiardo [In Memoriam]
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 27 (7) , 122-123
Remembering Mauro Mongiardo [In Memoriam]
- 15 February 2023
- Published by American Physical Society (APS) in Physical Review A
- Vol. 107 (2) , 022612
Circuit quantum electrodynamic model of dissipative-dispersive Josephson traveling-wave parametric amplifiers
We present a quantum-mechanical model for a four-wave-mixing Josephson traveling-wave parametric amplifier including substrate losses and associated thermal fluctuations. Under the assumption of a strong undepleted classical pump tone, we derive an analytic solution for the bosonic annihilation operator of the weak signal photon field using temporal equations of motion in a reference timeframe, including chromatic dispersion. From this result, we can predict the asymmetric gain spectrum of a Josephson traveling-wave parametric amplifier due to nonzero substrate losses. We also predict the equivalent added input noise including quantum fluctuations as well as thermal noise contributions. Our results are in excellent agreement with recently published experimental data.
- 15 February 2023
- Published by American Physical Society (APS) in Physical Review A
- Vol. 107 (2) , 022612
Circuit quantum electrodynamic model of dissipative-dispersive Josephson traveling-wave parametric amplifiers
We present a quantum-mechanical model for a four-wave-mixing Josephson traveling-wave parametric amplifier including substrate losses and associated thermal fluctuations. Under the assumption of a strong undepleted classical pump tone, we derive an analytic solution for the bosonic annihilation operator of the weak signal photon field using temporal equations of motion in a reference timeframe, including chromatic dispersion. From this result, we can predict the asymmetric gain spectrum of a Josephson traveling-wave parametric amplifier due to nonzero substrate losses. We also predict the equivalent added input noise including quantum fluctuations as well as thermal noise contributions. Our results are in excellent agreement with recently published experimental data.
- 28 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Spatial Evolution of Quantized Discrete-Mode Operators in a Lossy Nonlinear Josephson-Embedded Transmission Line
We present a description of the spatial evolution of quantized discrete-mode operators along a lossy nonlinear transmission line. The nonlinearity is formed by hundereds or even thousands of Josephson junctions which are placed periodically along a microwave transmission line. Dissipation is added to the system Hamiltonian by coupling the nonlinear transmission line to an Ohmic bath. Using the Hamiltonian of the open quantum system, Heisenberg equations of motion for the discrete mode operators can be derived in terms of quantum Langevin equations. The temporal equations of motion are then translated to the spatial domain to investigate the performance of a nonlinear four-wave-mixing process, while signals propagate along the transmission line.
- 28 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Spatial Evolution of Quantized Discrete-Mode Operators in a Lossy Nonlinear Josephson-Embedded Transmission Line
We present a description of the spatial evolution of quantized discrete-mode operators along a lossy nonlinear transmission line. The nonlinearity is formed by hundereds or even thousands of Josephson junctions which are placed periodically along a microwave transmission line. Dissipation is added to the system Hamiltonian by coupling the nonlinear transmission line to an Ohmic bath. Using the Hamiltonian of the open quantum system, Heisenberg equations of motion for the discrete mode operators can be derived in terms of quantum Langevin equations. The temporal equations of motion are then translated to the spatial domain to investigate the performance of a nonlinear four-wave-mixing process, while signals propagate along the transmission line.
- 28 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
DC driven Josephson Quantum Circuits
Superconducting nanoelectronic devices based on the Josephson effect, and operating in the microwave frequency range have become key devices for quantum-state engineering and quantum computing, and quantum sensorics. The application of Lagrange and Hamilton methods to classical electric circuits and to circuit quantum electrodynamic circuits provides for a modeling approach. We present a quantum circuit model taking multiple DC driven Josephson junctions into account.
- 28 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
DC driven Josephson Quantum Circuits
Superconducting nanoelectronic devices based on the Josephson effect, and operating in the microwave frequency range have become key devices for quantum-state engineering and quantum computing, and quantum sensorics. The application of Lagrange and Hamilton methods to classical electric circuits and to circuit quantum electrodynamic circuits provides for a modeling approach. We present a quantum circuit model taking multiple DC driven Josephson junctions into account.
- 4 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 268-269
Cyclostationarity in EMI Assessment of PCBs
Printed circuit boards (PCBs) are a source of radiated electromagnetic interference (EMI). Signal data transfer occurring on digital circuits can be considered in EMI modeling as a random process with cyclostationary properties. Electromagnetic fields originating from random or quasi-random source processes with stationary Gaussian probability distribution can be characterized by field-field correlations. For cyclostationary processes, the analysis procedure needs to be extended. In this contribution, we discuss the exposure of cycostationarity in the context of near field correlation analysis.
- 4 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 268-269
Cyclostationarity in EMI Assessment of PCBs
Printed circuit boards (PCBs) are a source of radiated electromagnetic interference (EMI). Signal data transfer occurring on digital circuits can be considered in EMI modeling as a random process with cyclostationary properties. Electromagnetic fields originating from random or quasi-random source processes with stationary Gaussian probability distribution can be characterized by field-field correlations. For cyclostationary processes, the analysis procedure needs to be extended. In this contribution, we discuss the exposure of cycostationarity in the context of near field correlation analysis.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 573-578
Characterization of the Cyclostationary Emissions in the Near-Field of Electronic Device
In this paper a methodology for the characterization of cyclostationary sources based on near-field time-domain measurements is proposed. The theory of the near-field scanning measurements over the equivalent Huygens' surface in parallel to the object plane of the PCB is presented. The theoretical background for the properties and characterization of the cyclostationary random processes is given. The space-time distributions of the cyclostationary sources over the equivalent Huygens surface of Intel Galileo Board is experimentally determined.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 573-578
Characterization of the Cyclostationary Emissions in the Near-Field of Electronic Device
In this paper a methodology for the characterization of cyclostationary sources based on near-field time-domain measurements is proposed. The theory of the near-field scanning measurements over the equivalent Huygens' surface in parallel to the object plane of the PCB is presented. The theoretical background for the properties and characterization of the cyclostationary random processes is given. The space-time distributions of the cyclostationary sources over the equivalent Huygens surface of Intel Galileo Board is experimentally determined.
- 1 June 2017
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 76, 175-187
Brune’s algorithm for lumped element equivalent circuit synthesis of linear lossy multiports
- 1 June 2017
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 76, 175-187
Brune’s algorithm for lumped element equivalent circuit synthesis of linear lossy multiports
- 1 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Localization of the equivalent sources on the PCB surface by using ultra-wideband time domain near-field measurements
In this paper a 2D parametric identification algorithm of stochastic electromagnetic interference (EMI) sources based on near-field measurements is presented. The unintentional radiation of electronic devices and connecting cables can be measured by using two-point near-field planar scanning probes connected to the digital oscilloscope for ultra-wideband (UWB) time-domain data recording. The characterization of the registered stochastic time-domain field distribution was implemented by evaluating the autocorrelation and cross-correlation spectra. Due to the cyclostationary property of the stochastic information signals, the ensemble averaging procedure allows evaluating amplitudes and initial phases of clock harmonics, used for the synchronization of electronic device and information transmitting through the cables. The radiating object could be modelled as a set of equivalent electrical dipoles arranged on a grid in the object plane. To determine the equivalent dipole moments, the inverse procedure for the estimated clock harmonic was realized assuming the near-field propagation model. The final localization of the equivalent dipoles for the defined clock harmonic was implemented by the application of 2D Matrix Pencil algorithm and Minimum Least Square fitting procedure. The experimental data was processed with proposed parametric identification procedure for a spatial localization of equivalent dipoles and effective sources on the surface of the radiating structure.
- 1 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Localization of the equivalent sources on the PCB surface by using ultra-wideband time domain near-field measurements
In this paper a 2D parametric identification algorithm of stochastic electromagnetic interference (EMI) sources based on near-field measurements is presented. The unintentional radiation of electronic devices and connecting cables can be measured by using two-point near-field planar scanning probes connected to the digital oscilloscope for ultra-wideband (UWB) time-domain data recording. The characterization of the registered stochastic time-domain field distribution was implemented by evaluating the autocorrelation and cross-correlation spectra. Due to the cyclostationary property of the stochastic information signals, the ensemble averaging procedure allows evaluating amplitudes and initial phases of clock harmonics, used for the synchronization of electronic device and information transmitting through the cables. The radiating object could be modelled as a set of equivalent electrical dipoles arranged on a grid in the object plane. To determine the equivalent dipole moments, the inverse procedure for the estimated clock harmonic was realized assuming the near-field propagation model. The final localization of the equivalent dipoles for the defined clock harmonic was implemented by the application of 2D Matrix Pencil algorithm and Minimum Least Square fitting procedure. The experimental data was processed with proposed parametric identification procedure for a spatial localization of equivalent dipoles and effective sources on the surface of the radiating structure.
- 15 April 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 5 (3) , 335-343
A Nanostructured Long-Wave Infrared Range Thermocouple Detector
Infrared (IR) detectors for the long-wave infrared range (LWIR) based on nanostructured thermocouples exhibit response times in the order of picoseconds and will open new areas of applications in THz broadband communication systems. We show experimental evidence for a nonzero relative Seebeck coefficient between the narrow and the wide wire segments of single-material thermocouples, and we investigate the thermal dynamics of nano-thermocouples for a substrate heated by a nanostructured thermocouple patch. Due to its low thermal capacity a mesoscopic thermocouple is an extremely fast square-law detector with cutoff frequencies up to several hundred GHz.
- 15 April 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 5 (3) , 335-343
A Nanostructured Long-Wave Infrared Range Thermocouple Detector
Infrared (IR) detectors for the long-wave infrared range (LWIR) based on nanostructured thermocouples exhibit response times in the order of picoseconds and will open new areas of applications in THz broadband communication systems. We show experimental evidence for a nonzero relative Seebeck coefficient between the narrow and the wide wire segments of single-material thermocouples, and we investigate the thermal dynamics of nano-thermocouples for a substrate heated by a nanostructured thermocouple patch. Due to its low thermal capacity a mesoscopic thermocouple is an extremely fast square-law detector with cutoff frequencies up to several hundred GHz.
- Open Access
- 13 March 2013
- Published by IntechOpen
Chip-to-Chip and On-Chip Communications
Authors: Josef A. Nossek, Peter Russer, Tobias Noll, Amine Mezghani, Michel T. Ivrlač, Matthias Korb, Farooq Mukhtar, Hristomir Yordanov, Johannes A. Russer
- 13 March 2013
- Published by IntechOpen
Open AccessChip-to-Chip and On-Chip Communications
Authors: Josef A. Nossek, Peter Russer, Tobias Noll, Amine Mezghani, Michel T. Ivrlač, Matthias Korb, Farooq Mukhtar, Hristomir Yordanov, Johannes A. Russer