Matt Jensen

Boat acceleration profiles can provide valuable information for coaches and practitioners to make meaningful technical interventions and monitor the determinants of success in rowing. Previous studies have used simple feature detection methods to identify key phases within individual strokes, such as drive onset, drive time, drive offset and stroke time. However, based on skill level, technique or boat class, the hull acceleration profile can differ, making robust feature detection more challenging. The current study’s purpose is to employ the undecimated wavelet transform (UWT) technique to detect individual features in the stroke acceleration profile from a single rowing hull-mounted accelerometer. In this investigation, the temporal and kinematic values obtained using the AdMos^TM sensor in conjunction with the UWT processing approach were strongly correlated with the comparative measures of the Peach™ instrumented oarlock system. The measures for stroke time displayed very strong agreeability between the systems for all boat classes, with ICC values of 0.993, 0.963 and 0.954 for the W8+, W4− and W1x boats, respectively. Similarly, the drive time was also very consistent, with strong to very strong agreeability, producing ICC values of 0.937, 0.901 and 0.881 for the W8+, W4− and W1x boat classes. Further, a Bland–Altman analysis displayed little to no bias between the AdMos^TM-derived and Peach™ measures, indicating that there were no systematic discrepancies between signals. This single-sensor solution could form the basis for a simple, cost-effective and accessible alternative to multi-sensor instrumented systems for the determination of sub-stroke kinematic phases.

Background: Para-sports such as wheelchair rugby have seen increased use of inertial measurement units (IMU) to measure wheelchair mobility. The accessibility and accuracy of IMUs have enabled the quantification of many wheelchair metrics and the ability to further advance analyses such as force-velocity (FV) profiling. However, the FV modeling approach has not been refined to include wheelchair specific parameters. Purpose: The purpose of this study was to compare wheelchair rugby sprint FV profiles, developed from a wheel-mounted IMU, using current mono-exponential modeling techniques against a dynamic resistive force model with wheelchair specific resistance coefficients. Methods: Eighteen athletes from a national wheelchair rugby program performed 2 × 45 m all-out sprints on an indoor hardwood court surface. Results: Velocity modelling displayed high agreeability, with an average RMSE of 0.235 ± 0.07 m/s⁻¹ and r² of 0.946 ± 0.02. Further, the wheelchair specific resistive force model resulted in greater force and power outcomes, better aligning with previously collected measures. Conclusions: The present study highlights the proof of concept that a wheel-mounted IMU combined with wheelchair-specific FV modelling provided estimates of force and power that better account for the resistive forces encountered by wheelchair rugby athletes.

This study characterized the absolute pressure measurement error and reliability of a new fully integrated (Kinetyx, SI) plantar-pressure measurement system (PPMS) versus an industry-standard PPMS (F-Scan, Tekscan) during an established benchtop testing protocol as well as via a research-grade, instrumented treadmill (Bertec) during a running protocol. Benchtop testing results showed that both SI and F-Scan had strong positive linearity (Pearson’s correlation coefficient, PCC = 0.86–0.97, PCC = 0.87–0.92; RMSE = 15.96 ± 9.49) and mean root mean squared error RMSE (9.17 ± 2.02) compared to the F-Scan on a progressive loading step test. The SI and F-Scan had comparable results for linearity and hysteresis on a sinusoidal loading test (PCC = 0.92–0.99; 5.04 ± 1.41; PCC = 0.94–0.99; 6.15 ± 1.39, respectively). SI had less mean RMSE (6.19 ± 1.38) than the F-Scan (8.66 ±2.31) on the sinusoidal test and less absolute error (4.08 ± 3.26) than the F-Scan (16.38 ± 12.43) on a static test. Both the SI and F-Scan had near-perfect between-day reliability interclass correlation coefficient, ICC = 0.97–1.00) to the F-Scan (ICC = 0.96–1.00). During running, the SI pressure output had a near-perfect linearity and low RMSE compared to the force measurement from the Bertec treadmill. However, the SI pressure output had a mean hysteresis of 7.67% with a 28.47% maximum hysteresis, which may have implications for the accurate quantification of kinetic gait measures during running.

Investigating the relationship between the movement patterns of multiple limb segments during the rowing stroke on the resulting force production in elite rowers can provide foundational insight into optimal technique. It can also highlight potential mechanisms of injury and performance improvement. The purpose of this study was to conduct a kinematic analysis of the rowing stroke together with force production during a step test in elite national-team heavyweight men to evaluate the fundamental patterns that contribute to expert performance. Twelve elite heavyweight male rowers performed a step test on a row-perfect sliding ergometer [5 × 1 min with 1 min rest at set stroke rates (20, 24, 28, 32, 36)]. Joint angle displacement and velocity of the hip, knee and elbow were measured with electrogoniometers, and force was measured with a tension/compression force transducer in line with the handle. To explore interactions between kinematic patterns and stroke performance variables, joint angular velocities of the hip, knee and elbow were entered into principal component analysis (PCA) and separate ANCOVAs were run for each performance variable (peak force, impulse, split time) with dependent variables, and the kinematic loading scores (Kpc,_ls) as covariates with athlete/stroke rate as fixed factors. The results suggested that rowers’ kinematic patterns respond differently across varying stroke rates. The first seven PCs accounted for 79.5% (PC1 [26.4%], PC2 [14.6%], PC3 [11.3%], PC4 [8.4%], PC5 [7.5%], PC6 [6.5%], PC7 [4.8%]) of the variances in the signal. The PCs contributing significantly (p ≤ 0.05) to performance metrics based on PC loading scores from an ANCOVA were (PC1, PC2, PC6) for split time, (PC3, PC4, PC5, PC6) for impulse, and (PC1, PC6, PC7) for peak force. The significant PCs for each performance measure were used to reconstruct the kinematic patterns for split time, impulse and peak force separately. Overall, PCA was able to differentiate between rowers and stroke rates, and revealed features of the rowing-stroke technique correlated with measures of performance that may highlight meaningful technique-optimization strategies. PCA could be used to provide insight into differences in kinematic strategies that could result in suboptimal performance, potential asymmetries or to determine how well a desired technique change has been accomplished by group and/or individual athletes.