Taehwan Moon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Taehwan Moon has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- Jianhua Joshua Yang
Ming Hsieh Department of Electrical and Computer Engineering University of Southern California Los Angeles California USA
4 shared publications - Hagyoul Bae
Jeonbuk National University
3 shared publications Chang Hwa Jung
Semiconductor Research and Development Center, Samsung Electronics Company, 1 Samsungjeonja-ro, Hwaseong-si, Gyeonggi-do, 18448, Republic of Korea
2 shared publications- Dong Hee Han
Department of Materials Science and Engineering and Research Institute of Advanced Materials Inter‐University Semiconductor Research Center Seoul National University Seoul Republic of Korea
2 shared publications Dong Hyun Lee
Department of Materials Science and Engineering & Inter-university Semiconductor Research Center, College of Engineering, Seoul National University, Seoul 08826, Republic of Korea
2 shared publicationsDuk-Hyun Choe
Samsung Advanced Institute of Technology, Samsung Electronics, Suwon, South Korea
2 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (20)
Dynamic Landau–Khalatnikov Modeling of Ferroelectric Hafnium–Zirconium Oxides Across Volatile and Non‐Volatile Switching
The design of energy‐efficient neuromorphic devices demands compact, physically grounded models that seamlessly connect microscopic ferroelectric dynamics to macroscopic circuit behavior. Hafnium–zirconium oxides (, HZO) are compelling candidates owing to their CMOS compatibility, scalability below 10 nm, and tunable transition between ferroelectric and volatile responses. Yet, conventional first‐order Landau–Khalatnikov (LK) formulations cannot capture key experimental features such as negative differential capacitance, pseudo‐inductive transients, and leakage interplay. Here we introduce an extended LK framework incorporating inertial second‐order terms, nonlinear charge‐dependent damping, and a modular leakage branch. This unified, simulation‐ready model quantitatively reproduces experimental Q–V characteristics across Hf‐rich, equiatomic, and Zr‐rich HZO compositions, defining operational regimes from non‐volatile memory to volatile, reservoir‐like dynamics. By linking free‐energy landscapes to compact circuit representations, the approach establishes a predictive device–model–circuit co‐design framework that connects atomistic energetics with system‐level simulation, enabling composition‐specific design rules for scalable, low‐power neuromorphic architectures.
- 12 October 2026
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (20)
Open AccessDynamic Landau–Khalatnikov Modeling of Ferroelectric Hafnium–Zirconium Oxides Across Volatile and Non‐Volatile Switching
The design of energy‐efficient neuromorphic devices demands compact, physically grounded models that seamlessly connect microscopic ferroelectric dynamics to macroscopic circuit behavior. Hafnium–zirconium oxides (, HZO) are compelling candidates owing to their CMOS compatibility, scalability below 10 nm, and tunable transition between ferroelectric and volatile responses. Yet, conventional first‐order Landau–Khalatnikov (LK) formulations cannot capture key experimental features such as negative differential capacitance, pseudo‐inductive transients, and leakage interplay. Here we introduce an extended LK framework incorporating inertial second‐order terms, nonlinear charge‐dependent damping, and a modular leakage branch. This unified, simulation‐ready model quantitatively reproduces experimental Q–V characteristics across Hf‐rich, equiatomic, and Zr‐rich HZO compositions, defining operational regimes from non‐volatile memory to volatile, reservoir‐like dynamics. By linking free‐energy landscapes to compact circuit representations, the approach establishes a predictive device–model–circuit co‐design framework that connects atomistic energetics with system‐level simulation, enabling composition‐specific design rules for scalable, low‐power neuromorphic architectures.
- 22 May 2026
- Published by AIP Publishing in Chemical Physics Reviews
- Vol. 7 (2)
Chemically produced two-dimensional conducting interfaces for memory and neuromorphic applications
Two-dimensional electron gases (2DEGs) at epitaxial oxide interfaces, such as LaAlO3/SrTiO3 heterostructures, have long served as model platforms for exploring emergent interfacial phenomena, including superconductivity, magnetism, and tunable metal–insulator transitions. While such systems were initially investigated primarily within the context of condensed matter physics, their relevance is being redefined by recent advances in non-epitaxial oxide 2DEGs, which offer new opportunities for practical applications. In contrast to polarity-driven epitaxial interfaces, non-epitaxial oxide 2DEGs are often governed by chemically driven carrier generation mechanisms, most notably oxygen vacancy (VO) formation induced by interfacial redox reactions. These mechanisms enable systematic tuning of interfacial electronic properties using amorphous or polycrystalline oxides and industry-compatible processes. This review provides a unified perspective linking the fundamental formation mechanisms of oxide 2DEG to their emerging applications. We first survey the principal physical origins of oxide 2DEGs, followed by an in-depth discussion of VO generation pathways in non-epitaxial oxide systems, including ionic bombardment, metal-induced redox reactions, and surface chemical effects. Building on this mechanistic foundation, we connect interfacial chemistry to application-level performance metrics, with particular emphasis on memory and neuromorphic technologies motivated by rapidly expanding computational demands in the AI era. In memory architectures, oxide 2DEGs are evaluated as enablers of both selector devices and storage elements, while in neuromorphic hardware, sensor platforms exploiting 2DEG transport are highlighted for their capability to emulate biological sensory functions and dynamics. Key challenges for practical deployment of oxide 2DEGs, including compatibility with three-dimensional integration, thermal stability during processing, and limitations in material selection, are critically examined. Potential strategies for overcoming these constraints, such as interfacial chemistry control, defect engineering, and process–structure–property correlations, are discussed. By bridging the fundamental physics and chemistry of oxide 2DEGs with emerging device-level applications, this review underscores their potential as a cornerstone material platform for next-generation, energy-efficient computing architectures.
- 22 May 2026
- Published by AIP Publishing in Chemical Physics Reviews
- Vol. 7 (2)
Chemically produced two-dimensional conducting interfaces for memory and neuromorphic applications
Two-dimensional electron gases (2DEGs) at epitaxial oxide interfaces, such as LaAlO3/SrTiO3 heterostructures, have long served as model platforms for exploring emergent interfacial phenomena, including superconductivity, magnetism, and tunable metal–insulator transitions. While such systems were initially investigated primarily within the context of condensed matter physics, their relevance is being redefined by recent advances in non-epitaxial oxide 2DEGs, which offer new opportunities for practical applications. In contrast to polarity-driven epitaxial interfaces, non-epitaxial oxide 2DEGs are often governed by chemically driven carrier generation mechanisms, most notably oxygen vacancy (VO) formation induced by interfacial redox reactions. These mechanisms enable systematic tuning of interfacial electronic properties using amorphous or polycrystalline oxides and industry-compatible processes. This review provides a unified perspective linking the fundamental formation mechanisms of oxide 2DEG to their emerging applications. We first survey the principal physical origins of oxide 2DEGs, followed by an in-depth discussion of VO generation pathways in non-epitaxial oxide systems, including ionic bombardment, metal-induced redox reactions, and surface chemical effects. Building on this mechanistic foundation, we connect interfacial chemistry to application-level performance metrics, with particular emphasis on memory and neuromorphic technologies motivated by rapidly expanding computational demands in the AI era. In memory architectures, oxide 2DEGs are evaluated as enablers of both selector devices and storage elements, while in neuromorphic hardware, sensor platforms exploiting 2DEG transport are highlighted for their capability to emulate biological sensory functions and dynamics. Key challenges for practical deployment of oxide 2DEGs, including compatibility with three-dimensional integration, thermal stability during processing, and limitations in material selection, are critically examined. Potential strategies for overcoming these constraints, such as interfacial chemistry control, defect engineering, and process–structure–property correlations, are discussed. By bridging the fundamental physics and chemistry of oxide 2DEGs with emerging device-level applications, this review underscores their potential as a cornerstone material platform for next-generation, energy-efficient computing architectures.
- 3 April 2026
- Published by Elsevier in Materials Today Chemistry
- Vol. 53
Designing cryo-compatible ferroelectric hafnia devices through electrode and interface control
- 3 April 2026
- Published by Elsevier in Materials Today Chemistry
- Vol. 53
Designing cryo-compatible ferroelectric hafnia devices through electrode and interface control
- Open Access
- 16 January 2026
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (3)
Enhanced Dielectric Constant by Al Gradient Doping on Atomic‐Layer‐Deposited HfO 2 ‐Based Metal–Insulator–Metal Capacitor
As industries increasingly demand larger data capacities and faster processing, enhancing the capacitance of metal–insulator–metal (MIM) capacitors becomes crucial. This study investigates the effect of aluminum (Al) gradient doping on the dielectric constant of HfO 2 ‐based MIM capacitors. Compared with conventional uniform doping, gradient doping more effectively accelerates the transition of HfO 2 to its high‐ k tetragonal phase, leading to higher capacitance. The study also explores factors such as the annealing temperature and atomic layer deposition conditions to optimize the high‐ k performance. Capacitors were fabricated and tested with gradient and uniform doping under 400°C, 500°C, and 600°C annealing conditions. Gradient doping significantly reduces the leakage current by an order of magnitude. The uniformly doped capacitors exhibit a dielectric constant of ∼44.7 and an equivalent oxide thickness (EOT) of 0.96 nm, whereas those with gradient doping achieve a dielectric constant of ∼60.7, which is the highest k ‐value of HfO 2 reported to date, and an EOT of 0.71 nm, representing a 35.8% improvement in dielectric constant and a 0.25 nm reduction in EOT. These findings highlight the potential of gradient doping to enhance MIM capacitor performance for high‐capacitance applications.
- 16 January 2026
- Published by Wiley in Advanced Electronic Materials
- Vol. 12 (3)
Open AccessEnhanced Dielectric Constant by Al Gradient Doping on Atomic‐Layer‐Deposited HfO 2 ‐Based Metal–Insulator–Metal Capacitor
As industries increasingly demand larger data capacities and faster processing, enhancing the capacitance of metal–insulator–metal (MIM) capacitors becomes crucial. This study investigates the effect of aluminum (Al) gradient doping on the dielectric constant of HfO 2 ‐based MIM capacitors. Compared with conventional uniform doping, gradient doping more effectively accelerates the transition of HfO 2 to its high‐ k tetragonal phase, leading to higher capacitance. The study also explores factors such as the annealing temperature and atomic layer deposition conditions to optimize the high‐ k performance. Capacitors were fabricated and tested with gradient and uniform doping under 400°C, 500°C, and 600°C annealing conditions. Gradient doping significantly reduces the leakage current by an order of magnitude. The uniformly doped capacitors exhibit a dielectric constant of ∼44.7 and an equivalent oxide thickness (EOT) of 0.96 nm, whereas those with gradient doping achieve a dielectric constant of ∼60.7, which is the highest k ‐value of HfO 2 reported to date, and an EOT of 0.71 nm, representing a 35.8% improvement in dielectric constant and a 0.25 nm reduction in EOT. These findings highlight the potential of gradient doping to enhance MIM capacitor performance for high‐capacitance applications.
- 21 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (4) , 1434-1443
Unveiling the capacitance overestimation of a HfO 2 –ZrO 2 solid solution at the morphotropic phase boundary
A comprehensive electrical analysis reveals that the dielectric constant of HfO 2 -based thin film capacitors at the morphotropic phase boundary has been overestimated.
- 21 November 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (4) , 1434-1443
Unveiling the capacitance overestimation of a HfO 2 –ZrO 2 solid solution at the morphotropic phase boundary
A comprehensive electrical analysis reveals that the dielectric constant of HfO 2 -based thin film capacitors at the morphotropic phase boundary has been overestimated.
- 27 October 2025
- Published by Springer Nature in Nature Electronics
- Vol. 8 (12) , 1211-1221
A spiking artificial neuron based on one diffusive memristor, one transistor and one resistor
- 27 October 2025
- Published by Springer Nature in Nature Electronics
- Vol. 8 (12) , 1211-1221
A spiking artificial neuron based on one diffusive memristor, one transistor and one resistor
- Open Access
- 24 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (20) , 4078
Correction: HfO 2 -based ferroelectric synaptic devices: challenges and engineering solutions
Correction for ‘HfO 2 -based ferroelectric synaptic devices: challenges and engineering solutions’ by Taegyu Kwon et al. , Chem. Commun. , 2025, 61 , 3061–3080, https://doi.org/10.1039/d4cc05293e.
- 24 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (20) , 4078
Open AccessCorrection: HfO 2 -based ferroelectric synaptic devices: challenges and engineering solutions
Correction for ‘HfO 2 -based ferroelectric synaptic devices: challenges and engineering solutions’ by Taegyu Kwon et al. , Chem. Commun. , 2025, 61 , 3061–3080, https://doi.org/10.1039/d4cc05293e.
- 10 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (6)
Low-frequency noise and DC I–V characterization of gamma-ray irradiation-induced degradation and trap behaviors in a-IGZO TFTs
This work reports the impact of gamma-ray (γ-ray) irradiation-induced degradation based on the trap behaviors in amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors. By employing multiple measurement configurations via low-frequency noise and direct current I–V characterization, we quantitatively investigated the energetic distribution of subgap density-of-states in the a-IGZO channel and the spatial distribution of oxide traps (Not) in the gate insulator, respectively. Also, the qualitative analysis was performed to determine the oxygen-related defects after γ-ray irradiation using x-ray photoelectron spectroscopy. Furthermore, the validity of our results was additionally confirmed by measuring the breakdown voltage and applying positive-bias stress to the fabricated devices exposed to radiation for accelerated tests.
- 10 February 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (6)
Low-frequency noise and DC I–V characterization of gamma-ray irradiation-induced degradation and trap behaviors in a-IGZO TFTs
This work reports the impact of gamma-ray (γ-ray) irradiation-induced degradation based on the trap behaviors in amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors. By employing multiple measurement configurations via low-frequency noise and direct current I–V characterization, we quantitatively investigated the energetic distribution of subgap density-of-states in the a-IGZO channel and the spatial distribution of oxide traps (Not) in the gate insulator, respectively. Also, the qualitative analysis was performed to determine the oxygen-related defects after γ-ray irradiation using x-ray photoelectron spectroscopy. Furthermore, the validity of our results was additionally confirmed by measuring the breakdown voltage and applying positive-bias stress to the fabricated devices exposed to radiation for accelerated tests.
- 8 January 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (15) , 3061-3080
HfO2-based ferroelectric synaptic devices: challenges and engineering solutions
This perspective article discusses the limitations and potential of HfO2 ferroelectrics in synaptic devices and introduces key strategies at both the device and array levels to enhance the synaptic performance of HfO2-based ferroelectrics.
- 8 January 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (15) , 3061-3080
HfO2-based ferroelectric synaptic devices: challenges and engineering solutions
This perspective article discusses the limitations and potential of HfO2 ferroelectrics in synaptic devices and introduces key strategies at both the device and array levels to enhance the synaptic performance of HfO2-based ferroelectrics.
- 8 October 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (4)
Investigation of ferro-resistive switching mechanisms in TiN/Hf0.5Zr0.5O2/WOx/W ferroelectric tunnel junctions with the interface layer effect
This study presents an in-depth analysis of ferro-resistive switching (FRS) behaviors in a TiN/Hf0.5Zr0.5O2(HZO)/WOx/W ferroelectric tunnel junction (FTJ) device, with a particular focus on the role of the tungsten oxide (WOx) interface layer (IL). Structural examinations confirm the presence of the WOx IL, which significantly influences the FRS properties of the device. Electrical measurements indicate the devices exhibit stable and reproducible FRS characteristics with an ON/OFF ratio of 9.7, predominantly attributed to the tunneling electro-resistance (TER) effect driven by the ferroelectric polarization. Comprehensive numerical simulations, incorporating the nucleation-limited switching model and Simmons tunneling mechanism, provide detailed insights into how the WOx IL and the trapped charges at the HZO/WOx interface affect polarization switching mechanisms and the electronic potential barrier profile. These findings underscore the importance of interface effects in HfO2-based FTJs and advance the understanding of the TER mechanism in multilayer ferroelectric systems.
- 8 October 2024
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 11 (4)
Investigation of ferro-resistive switching mechanisms in TiN/Hf0.5Zr0.5O2/WOx/W ferroelectric tunnel junctions with the interface layer effect
This study presents an in-depth analysis of ferro-resistive switching (FRS) behaviors in a TiN/Hf0.5Zr0.5O2(HZO)/WOx/W ferroelectric tunnel junction (FTJ) device, with a particular focus on the role of the tungsten oxide (WOx) interface layer (IL). Structural examinations confirm the presence of the WOx IL, which significantly influences the FRS properties of the device. Electrical measurements indicate the devices exhibit stable and reproducible FRS characteristics with an ON/OFF ratio of 9.7, predominantly attributed to the tunneling electro-resistance (TER) effect driven by the ferroelectric polarization. Comprehensive numerical simulations, incorporating the nucleation-limited switching model and Simmons tunneling mechanism, provide detailed insights into how the WOx IL and the trapped charges at the HZO/WOx interface affect polarization switching mechanisms and the electronic potential barrier profile. These findings underscore the importance of interface effects in HfO2-based FTJs and advance the understanding of the TER mechanism in multilayer ferroelectric systems.