Xiaoying Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoying Wang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Kai Li
Ningbo University
4 shared publications Litao Geng
Professor, School of Traffic Engineering, Shandong Jianzhu Univ., Jinan 250101, China
3 shared publicationsKai Li
Associate Professor, School of Mechanical Engineering and Mechanics, Ningbo Univ., Ningbo 315211, China
2 shared publicationsQian Xu
Associate Professor, School of Management Engineering, Shandong Jianzhu Univ., Jinan 250101, China
2 shared publicationsYong Ding
Professor, School of Civil and Environmental Engineering and Geography Science, Ningbo Univ., Ningbo 315211, China
2 shared publications- Yong Ding
School of Civil & Environmental Engineering and Geography Science, Ningbo University, Ningbo 315211, China
2 shared publications
Latest Publications
- Open Access
- 23 April 2024
- Published by AIP Publishing in Nanotechnology and Precision Engineering
- Vol. 7 (3)
Biomimetic 3D printing of composite structures with decreased cracking
The development of tissue engineering and regeneration research has created new platforms for bone transplantation. However, the preparation of scaffolds with good fiber integrity is challenging, because scaffolds prepared by traditional printing methods are prone to fiber cracking during solvent evaporation. Human skin has an excellent natural heat-management system, which helps to maintain a constant body temperature through perspiration or blood-vessel constriction. In this work, an electrohydrodynamic-jet 3D-printing method inspired by the thermal-management system of skin was developed. In this system, the evaporation of solvent in the printed fibers can be adjusted using the temperature-change rate of the substrate to prepare 3D structures with good structural integrity. To investigate the solvent evaporation and the interlayer bonding of the fibers, finite-element analysis simulations of a three-layer microscale structure were carried out. The results show that the solvent-evaporation path is from bottom to top, and the strain in the printed structure becomes smaller with a smaller temperature-change rate. Experimental results verified the accuracy of these simulation results, and a variety of complex 3D structures with high aspect ratios were printed. Microscale cracks were reduced to the nanoscale by adjusting the temperature-change rate from 2.5 to 0.5 °C s−1. Optimized process parameters were selected to prepare a tissue engineering scaffold with high integrity. It was confirmed that this printed scaffold had good biocompatibility and could be used for bone-tissue regeneration. This simple and flexible 3D-printing method can also help with the preparation of a wide range of micro- and nanostructured sensors and actuators.
- 23 April 2024
- Published by AIP Publishing in Nanotechnology and Precision Engineering
- Vol. 7 (3)
Open AccessBiomimetic 3D printing of composite structures with decreased cracking
The development of tissue engineering and regeneration research has created new platforms for bone transplantation. However, the preparation of scaffolds with good fiber integrity is challenging, because scaffolds prepared by traditional printing methods are prone to fiber cracking during solvent evaporation. Human skin has an excellent natural heat-management system, which helps to maintain a constant body temperature through perspiration or blood-vessel constriction. In this work, an electrohydrodynamic-jet 3D-printing method inspired by the thermal-management system of skin was developed. In this system, the evaporation of solvent in the printed fibers can be adjusted using the temperature-change rate of the substrate to prepare 3D structures with good structural integrity. To investigate the solvent evaporation and the interlayer bonding of the fibers, finite-element analysis simulations of a three-layer microscale structure were carried out. The results show that the solvent-evaporation path is from bottom to top, and the strain in the printed structure becomes smaller with a smaller temperature-change rate. Experimental results verified the accuracy of these simulation results, and a variety of complex 3D structures with high aspect ratios were printed. Microscale cracks were reduced to the nanoscale by adjusting the temperature-change rate from 2.5 to 0.5 °C s−1. Optimized process parameters were selected to prepare a tissue engineering scaffold with high integrity. It was confirmed that this printed scaffold had good biocompatibility and could be used for bone-tissue regeneration. This simple and flexible 3D-printing method can also help with the preparation of a wide range of micro- and nanostructured sensors and actuators.
- Open Access
- 23 January 2024
- Published by Springer Nature in Research Square
Cracking performance sensitivity to material parameters of asphalt mixture in asphalt pavement with stabilized base with inorganic binders
Fracture parameters of asphalt mixture have a great influence on reflective cracking propagation in asphalt pavement with stabilized base with inorganic binders, which is generally constructed in heavy traffic region. Many methods have been conducted to improve the temperature performance of asphalt mixture to reduce reflective crack. However, the relation between fracture parameters of asphalt mixture and cracking propagation law has not been investigated. In this study, cracking performance sensitive to material parameters of asphalt mixture in asphalt pavement was researched. Two kinds of thermal field models of pavement structure were built to obtain great falling temperature and circle temperature, which were used as the external temperature load to induce thermally reflective crack. The thermally reflective cracking propagation and sensitivity to fracture parameters of asphalt mixture were analyzed. In addition, the relationship between fatigue time and fatigue parameters defined in fatigue crack growth initiation criterion and fatigue crack growth completion criterion was investigated. Crack initiation temperature difference had a power relationship with elastic modulus, a linear relationship with tensile strength, but had no relationship with fracture energy. Crack completion temperature difference had a power relationship with elastic modulus, and a quadratic function with fracture energy. The results provided new insight into the cracking performance sensitivity to material parameters of asphalt mixture in reflective crack in asphalt pavement.
- 23 January 2024
- Published by Springer Nature in Research Square
Open AccessCracking performance sensitivity to material parameters of asphalt mixture in asphalt pavement with stabilized base with inorganic binders
Fracture parameters of asphalt mixture have a great influence on reflective cracking propagation in asphalt pavement with stabilized base with inorganic binders, which is generally constructed in heavy traffic region. Many methods have been conducted to improve the temperature performance of asphalt mixture to reduce reflective crack. However, the relation between fracture parameters of asphalt mixture and cracking propagation law has not been investigated. In this study, cracking performance sensitive to material parameters of asphalt mixture in asphalt pavement was researched. Two kinds of thermal field models of pavement structure were built to obtain great falling temperature and circle temperature, which were used as the external temperature load to induce thermally reflective crack. The thermally reflective cracking propagation and sensitivity to fracture parameters of asphalt mixture were analyzed. In addition, the relationship between fatigue time and fatigue parameters defined in fatigue crack growth initiation criterion and fatigue crack growth completion criterion was investigated. Crack initiation temperature difference had a power relationship with elastic modulus, a linear relationship with tensile strength, but had no relationship with fracture energy. Crack completion temperature difference had a power relationship with elastic modulus, and a quadratic function with fracture energy. The results provided new insight into the cracking performance sensitivity to material parameters of asphalt mixture in reflective crack in asphalt pavement.
- 20 February 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 371
Multiscale performance of composite modified cold patch asphalt mixture for pothole repair
- 20 February 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 371
Multiscale performance of composite modified cold patch asphalt mixture for pothole repair
- Open Access
- 13 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (10) , 2694
Tip-Viscid Electrohydrodynamic Jet 3D Printing of Composite Osteochondral Scaffold
A novel method called tip-viscid electrohydrodynamic jet printing (TVEJ), which produces a viscous needle tip jet, was presented to fabricate a 3D composite osteochondral scaffold with controllability of fiber size and space to promote cartilage regeneration. The tip-viscid process, by harnessing the combined effects of thermal, flow, and electric fields, was first systematically investigated by simulation analysis. The influences of process parameters on printing modes and resolutions were investigated to quantitatively guide the fabrication of various structures. 3D architectures with high aspect ratio and good interlaminar bonding were printed, thanks to the stable fine jet and its predictable viscosity. 3D composite osteochondral scaffolds with controllability of architectural features were fabricated, facilitating ingrowth of cells, and eventually inducing homogeneous cell proliferation. The scaffold’s properties, which included chemical composition, wettability, and durability, were also investigated. Feasibility of the 3D scaffold for cartilage tissue regeneration was also proven by in vitro cellular activities.
- 13 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (10) , 2694
Open AccessTip-Viscid Electrohydrodynamic Jet 3D Printing of Composite Osteochondral Scaffold
A novel method called tip-viscid electrohydrodynamic jet printing (TVEJ), which produces a viscous needle tip jet, was presented to fabricate a 3D composite osteochondral scaffold with controllability of fiber size and space to promote cartilage regeneration. The tip-viscid process, by harnessing the combined effects of thermal, flow, and electric fields, was first systematically investigated by simulation analysis. The influences of process parameters on printing modes and resolutions were investigated to quantitatively guide the fabrication of various structures. 3D architectures with high aspect ratio and good interlaminar bonding were printed, thanks to the stable fine jet and its predictable viscosity. 3D composite osteochondral scaffolds with controllability of architectural features were fabricated, facilitating ingrowth of cells, and eventually inducing homogeneous cell proliferation. The scaffold’s properties, which included chemical composition, wettability, and durability, were also investigated. Feasibility of the 3D scaffold for cartilage tissue regeneration was also proven by in vitro cellular activities.
- 2 November 2020
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 45 (1) , 269-279
Cracking Analysis of Asphalt Mixture Using Semi-circle Bending Method
- 2 November 2020
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 45 (1) , 269-279
Cracking Analysis of Asphalt Mixture Using Semi-circle Bending Method