HLHuanhuan Liu

Huanhuan Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huanhuan Liu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nonlinear Finite Element Analysis of a Composite Joint with a Blind Bolt and T-stub

    by Jincheng Hua, Xinwu Wang, Huanhuan Liu, Haisu Sun

    A detailed nonlinear finite element model was established based on completed experiments to investigate the behavior of a blind-bolted T-stub composite joint that connects a composite beam to a concrete-filled square tube column. This was accomplished by comparing the experimental results and the finite element simulation results using the hysteresis curve, failure mode, plastic deformation and strain development of the T-stub to ensure the reliability and accuracy of the finite element model. A parametric study was carried out on the base model to expand the library of test data. It was observed from the comparison that the proposed nonlinear FE model predicted the behavior of the composite joint. The wall thickness of the column and reinforcement ratio had a significant influence on the ultimate bending moment of the composite joint and the performance of the composite joint was mainly controlled by the reinforcement ratio when the concrete slab was under a positive bending moment. The flange of the T-stub, the web of the T-stub and the axial compression ratio had little effect on the performance of the composite joint.


  • Open Access

    Seismic Performance of an Exterior Joint between a Square Steel Tube Column and an H-Shape Steel Beam

    by Yongle Lin, Xinwu Wang, Jian Gong, Shuren Wang, Haisu Sun, Huanhuan Liu

    This study developed a 1:2 scale model using T-shape steel with one-side bolts to connect a square steel tube column to an H-shape steel beam for a quasi-static test to investigate the mechanical properties and seismic behavior of semi-rigid joints. Within the study context, the joint’s failure characteristics, hysteresis characteristics, and strain tendency under cyclic load were determined. In addition, this research analyzed the force characteristics and seismic performance of such joints based on the test outcomes. In order to further study the seismic performance of such joints, ABAQUS finite element software was used to establish a numerical model and perform parametric analysis. The findings indicated that the force on both sides of the joint is inconsistent, resulting in different seismic performances on both sides of the joint. Selecting a T-shape steel connector significantly affects the seismic capacity of beam–column joints. The seismic capacity of joints can be improved by increasing the size of the T-shape steel. The stability of one-side bolts under repeated load is good, and their strain value rises steadily. Hence, this type of one-side bolt is suitable for connecting closed steel tube columns and other components. In general, the seismic performance of square steel tube column–H-shape steel beam joints with one-side bolts and a T-shape steel connection is good and is recommended for practical engineering.