JWJinxin Wang

Jinxin Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinxin Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cutting Power, Temperature, and Surface Roughness: A Multiple Target Assessment of Beech during Diamond Milling

    by Yingyue Yu, Dietrich Buck, Haorang Yang, Xiaohang Du, Meiqi Song, Jinxin Wang, Zhaolong Zhu

    Beech wood is a material commonly used for furniture, and cutting performance is the key to improving product quality and enterprise benefits. In this work, beech milling experiments using diamond cutters were carried out, and the changes in cutting power, temperature, and surface roughness were examined using the factor analysis method. The main results of this work are listed as follows: Firstly, a higher cutting speed and depth led to higher cutting power, temperature, and surface roughness. Meanwhile, cutting power and surface roughness were negatively related to the rake angle; however, cutting temperature first increased and then decreased with the increase in rake angle. Furthermore, cutting depth had greatest impact on the cutting power and surface roughness, followed by rake angle and cutting speed. Cutting speed had the greatest contribution to the cutting temperature, followed by cutting depth and rake angle. Only the cutting depth had a significant contribution to both cutting power, temperature, and surface roughness. Finally, optimal cutting parameters were determined to be a rake angle of 15°, cutting speed of 54 m/s, and depth of 0.5 mm. These values best meet the multiple objectives of lower cutting power, temperature, and surface roughness, which relate to superior product quality and enterprise benefits.


  • Open Access

    Effects of Tool Tooth Number and Cutting Parameters on Milling Performance for Bamboo–Plastic Composite

    by Meiqi Song, Dietrich Buck, Yingyue Yu, Xiaohang Du, Xiaolei Guo, Jinxin Wang, Zhaolong Zhu

    Cutting force and temperature are critical indicators for improving cutting performance and productivity. This study used an up-milling experiment to ascertain the effect of tool tooth number, cutting speed, and depth on the machinability of bamboo–plastic composite. We focused on the changes in the resultant force and cutting temperature under different milling conditions. A response surface methodology was used to build prediction models for the resultant force and temperature. A verification test was conducted to prove the model’s reliability. The empirical findings suggested that the number of tool teeth had the most significant impacts on both the resultant force and the cutting temperature, followed by the depth of cut and the cutting speed. Moreover, the resultant force and cutting temperature showed increasing trends with decreasing numbers of tool teeth and increasing cut depths. However, cutting speed had a negative relationship with the resultant force and a positive relationship with temperature. We also determined the optimal milling conditions with the lowest force and temperature: four tool teeth, 300 m/min cutting speed, and 0.5 mm depth. This parameter combination can be used in the industrial manufacture of bamboo–plastic composite to improve tool life and manufacturing productivity.