JZJing Zhao

Jing Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jing Zhao has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Revealing the Reinforcing Mechanism of Modified Hexagonal Boron Nitride on Mechanical and Tribological Properties of Polytetrafluoroethylene Composites: Insights From Experiments and Molecular Dynamics Simulations

    by Yadi Yang, Jing Zhao, Jianzheng Cui, Wanqun Zhang, Xiaokun Zhang, Bowen Jiang

    The interfacial interactions between nanofillers and polymer matrices critically determine the overall performances of composites. In this study, we systematically investigated the effect of modifying hexagonal boron nitride (hBN) with 3‐aminopropyltriethoxysilane (APTES) on the mechanical and tribological performances of polytetrafluoroethylene (PTFE), using both experiment testing and molecular dynamics simulations. Mechanical and tribological tests show that, compared to neat PTFE, the APTES‐hBN/PTFE composite exhibits a 29.14% higher Young's modulus, a 25.24% higher fracture energy, a 29.15% lower coefficient of friction, and a 79.44% lower wear rate. Furthermore, APTES‐modified hBN promotes a transition in friction mechanism from adhesive wear and plastic deformation of PTFE to abrasive wear and interlaminar shear of hBN nanosheets, owing to improved dispersion and interfacial bonding. Simulation results reveal that APTES‐hBN provides the highest interfacial cohesive stress and interfacial shear stress among the modified fillers, which directly explains the enhanced stiffness, toughness, and wear resistance observed experimentally. Together, this work offers atomic‐level insights and a practical route for developing high‐performance polymer composites with superior mechanical properties and low friction and wear.

  • Open Access

    Synergistic Strengthening and Toughening of 3D-Printed Bioinspired Alumina Composites with a Multi-Scale Bouligand Structure

    by Zhaozhi Wang, Dongxu Duan, Lei Yang, Xu Bai, Zhibin Jiao, Chenliang Wu, Jing Zhao, Zhihui Zhang

    Inspired by the Bouligand helicoidal architecture of the dactyl club of the peacock mantis shrimp, this study employed direct ink writing (DIW) 3D printing to construct a three-level synergistic toughening system composed of nano-SiO2, microscale flake alumina, and a macroscale helicoidal structure. The effects of nano-SiO2 content, Bouligand helix angle, and flake alumina content on the flexural strength and fracture toughness of the composite ceramics were systematically investigated. The results showed that the optimal nano-SiO2 addition was 7 wt%, yielding a fracture toughness of 1.03 MPa·m1/2, which was 13% higher than that of pure alumina. The introduced intergranular glassy phase transformed the rigid grain-boundary bonding into a moderately strong gradient interface, resulting in higher fracture toughness for all SiO2-containing samples than for pure alumina. The Bouligand structure further increased the fracture toughness to a maximum of 1.45 MPa·m1/2 at a helix angle of 10°, representing a 39% improvement over the 0° sample. When microscale flake alumina was incorporated into the optimal matrix containing 7 wt% SiO2, the best overall mechanical performance was achieved at a flake alumina content of 5 wt%, where the flakes directly dissipated fracture energy through pull-out, fracture, and bridging mechanisms. The synergistic effect of the three structural levels was most pronounced at a helix angle of 20°, at which the sample containing 5 wt% flake alumina achieved a fracture toughness of 2.07 MPa·m1/2 with almost no loss in flexural strength, corresponding to a 113% improvement over the sample without flake alumina. These results demonstrate that three-level synergy can be achieved through nanoscale interfacial optimization, microscale energy dissipation by reinforcing phases, and macroscale crack deflection induced by the helicoidal structure, thereby providing important theoretical and experimental support for the multiscale design of high-performance bioinspired ceramic materials.


  • Open Access

    Three-Dimensional Printing Biomimetic Ceramic Composites Inspired by the Desert Scorpion with Excellent Erosion Wear Resistance

    by Zhaozhi Wang, Weicong Wang, Xinhui Duan, Xu Bai, Zhibin Jiao, Chenliang Wu, Jing Zhao, Zhihui Zhang

    Inspired by the erosion-resistant dorsal armor of the desert scorpion, this study developed biomimetic ZTA ceramic composites with enhanced resistance to solid particle erosion. Three biomimetic configurations, namely convex-bump (CH-O), convex-curved-surface (CH-CS), and convex hybrid rigid–flexible (CH-HS) structures, were fabricated by direct ink writing (DIW) 3D printing. Their erosion performance was evaluated by gas–solid two-phase erosion tests at impact angles ranging from 15° to 90°, and the underlying mechanisms were elucidated through erosion morphology analysis, actual impact angle analysis, and stress-wave propagation analysis. The results showed that the erosion rate of all samples first increased and then decreased with increasing impact angle, reaching a maximum at around 60°. Compared with the smooth control sample, CH-O exhibited lower erosion resistance under low-angle erosion conditions but showed clear improvement under high-angle erosion conditions, with the erosion resistance increased by 18.39–32.54%. CH-CS further improved the erosion resistance of CH-O, with enhancements of 14.31–53.92% at low impact angles and 24.57–35.17% at high impact angles. Among all the biomimetic designs, CH-HS exhibited the best overall erosion resistance, showing an additional improvement of 9.22–32.16% over CH-CS across the tested impact angle range. The superior erosion resistance was attributed to the synergistic effects of convex-bump morphology, curved-surface-induced particle deflection, and rigid–flexible coupling. These biomimetic features modified the actual impact angle of the particles, deflected their trajectories, reduced direct particle impact, and generated a shadow effect, while the flexible layer dissipated impact energy through reflection unloading at the rigid–flexible interface. This study provides a novel strategy for the biomimetic design of erosion-resistant ceramic composites and offers new insights into mitigating erosion damage in ceramic-based mechanical components.


  • Machine Learning Prediction of Tribological Properties of Graphene‐Reinforced Perfluoroelastomer Composites Based on Molecular Dynamics Simulations and Experimental Research

    by Shengbo Jin, Jing Zhao, Xueying Tan, Bowen Jiang

    This study aims to develop high‐performance polymer nanocomposites based on perfluoroelastomers (FFKM) using an integrated framework that combines molecular dynamics (MD) simulations, machine learning (ML), and experiments to investigate the factors governing tribological behavior. The friction coefficient shows negative correlations with temperature, normal load, and sliding velocity. Increasing the sliding velocity raises the average diffusion coefficient from 0.00422 to 0.04300. Increasing the normal load increases the transfer film thickness by 39.13% and reduces surface roughness by 36.19%. The SDM model achieves the highest prediction accuracy (R 2 = 0.9662), outperforming conventional algorithms. Among six friction test conditions, the minimum friction coefficient is 1.339. Two conditions with identical PV values of 0.1 exhibit similar friction coefficients (1.604 and 1.646). The experimental trends are consistent with the MD and ML results.


  • Effect of Geometrical Defects of Boron Nitride Nanotubes on Mechanical and Tribological Properties of Nitrile Butadiene Rubber Composites: Molecular Dynamics Simulations

    by Xiaokun Zhang, Dexi Wang, Jianzheng Cui, Jing Zhao, Yadi Yang

    Understanding the role of surface defects in nanoparticles is crucial for optimizing the interfacial design of polymer composites. In this study, molecular dynamics (MD) simulations were employed to investigate the influence of geometrical defects in boron nitride nanotubes (BNNTs) on the mechanical, interfacial, and tribological properties of nitrile butadiene rubber (NBR) matrices. Results reveal that defect‐free BNNTs provide the most effective reinforcement of the tensile properties of NBR, followed by Stone–Thrower–Wales (STW)‐defective BNNTs, whereas di‐vacancy (DV)‐defective BNNTs only have an obvious enhancement effect on the elastic modulus of NBR. Pull‐out simulations further demonstrate that, compared to DV‐ and STW‐defective BNNTs, defect‐free BNNTs enhance the interfacial shear strength and interfacial fracture toughness of NBR composites by 21.2% and 5.96%, and 22.5% and 5.14%, respectively. Additionally, compared with neat NBR, the incorporation of defect‐free, DV‐defective, and STW‐defective BNNTs reduces the friction coefficient and abrasion rate by 1.92% and 18.36%, 3.69% and 17.24%, and 3.97% and 17.84%, respectively. To elucidate the underlying mechanisms of BNNT surface defects, detailed analyses of the structural evolution of the composite networks and interfacial states were conducted. Overall, these findings provide new insights into the defect‐mediated reinforcement behavior of BNNTs and offer guidance for the rational design of defect‐engineered nanofillers to improve the performance of polymer composites.

  • Effect of Modified Ground Tire Rubber on Mechanical and Tribological Properties of Recycled Rubber Under Thermal‐Oxidative Aging: Experiments and Molecular Dynamics Simulations

    by Bowen Jiang, Jing Zhao, Shijie Wang, Yunlong Li, Bin Yang, Yadi Yang

    Thermo‐oxidative aging is the primary degradation pathway governing the service life and reliability of recycled rubber, as it impairs mechanical properties and limits reutilization. Combined experimental and molecular dynamics (MD) simulations were employed to examine the microstructural evolution and mechanical response of styrene‐butadiene rubber (SBR) and ground tire rubber (GTR) during the thermo‐oxidative aging process. Furthermore, the influence of various modified GTRs on the performance of recycled rubber was also investigated. Accelerated aging at 100°C led to a decrease in tensile strength and elongation at break, accompanied by an increase in hardness. Acid oxidation and incorporation of nanomaterials effectively improved the mechanical and friction properties of aged recycled rubber. Notably, composites containing graphene oxide demonstrated superior performance compared to those with hydroxylated carbon nanotubes, showing a 3.38% enhancement in elastic modulus and a 14.19% reduction in the coefficient of friction. MD simulations were employed to elucidate the influence of thermo‐oxidative aging on the tensile and frictional properties of recycled rubber, and the calculated results were found to be in good agreement with the experimental observations. This work establishes a quantitative oxidation–property nexus for recycled rubber and provides design guidelines for sustainable, aging‐resistant elastomers.


  • A Molecular Dynamics Simulation Study on Mechanical and Tribological Properties of SBR Composites Strengthened by Surface‐Modified Silica

    by Shuguo Guo, Shenghan Wang, Jing Zhao, Yadi Yang

    The interfacial enhancement mechanism has always been a widely concerned issue in the preparation of high‐performance silica‐reinforced rubber nanocomposites. In this study, the influence of the substitution of hydroxyl groups on the surface of silica (SiO2) by carboxyl groups on the mechanical and tribological capacities of styrene‐butadiene rubber (SBR) composites was studied through molecular dynamics (MD) simulations. Results display that compared with the original SiO2 nanoparticles, the carboxyl‐substituted SiO2 nanoparticles can effectively reinforce the interface strength between SiO2 nanoparticles and SBR; that is, the synergistic effect of the interfacial interaction strength and the interfacial interlocking effect dominated by the surface roughness leads to a remarkable improvement in the mechanical and tribological performances of SBR composites. In particular, compared with the original SiO2 nanoparticles, in normal separation mode, the interfacial cohesion strength and interfacial fracture toughness between the 100% carboxyl‐substituted SiO2 nanoparticles and the SBR matrix are improved by 16.05% and 29.11%, respectively; in shear separation mode, the interfacial shear strength and interfacial fracture toughness between the 100% carboxyl‐substituted SiO2 nanoparticles and the SBR matrix are increased by 36.92% and 71.72%, respectively.


  • Temperature‐dependent tribological and interfacial properties of perfluoroelastomer nanocomposites modified with graphene nanosheets functionalized through molecular dynamics simulations

    by Shengbo Jin, Heting Qiao, Jing Zhao

    The present simulation‐based study aims to develop high‐performance polymer nanocomposites (FFKM) by investigating the influence of graphene modified with different polar functional groups on the high‐temperature load‐bearing tribological and interfacial properties of FFKM nanocomposites. Molecular dynamics simulations were employed to explore the effects of hydroxyl (OH), carboxyl (COOH), and amino (NH2) functional groups on the tribological and interfacial behavior of FFKM across a broad temperature range (298–573 K). Utilizing analysis tools such as large‐scale atomic/molecular massively parallel simulator (CVFF, AIREBO and EAM), BIOVIA Materials Studio (2020), OVITO, and VMD, it was determined that the friction coefficient of FFKM composites decreases nonlinearly with increasing temperature. The polarity and hydrogen bonding capacity of the functional groups enhance intermolecular interactions, thereby further influencing the tribological response. The COOH‐GN/FFKM composite, with a surface roughness of 1.0352, resulted in substandard transfer film quality, diminished actual contact area, and elevated micro‐asperities, thereby fostering mechanical interlocking. Moreover, the surface roughness of functionalized graphene was found to augment the free volume of the composite and exhibited a positive correlation with pullout force. In conclusion, it can be stated that surface roughness exerts a significant influence on the tribological and interfacial properties of FFKM composites. Highlights: Functionalized graphene enhances perfluoroelastomer's tribological performance. Polar groups increase interaction strength and reduce wear at high temperatures. Glass transition temperature varies with functional group type. Surface roughness significantly impacts friction and wear behavior.