Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tuba Demir has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE

    by Tuba Demir, Bahar Demirel, Nisanur Gözet

    This study investigates the use of glass powder (GP) as a sustainable alternative to cement in the production of lightweight concrete, addressing the environmental footprint reduction and waste management of traditional concrete materials. In this study, 8 different concrete series were produced by substituting CT with cement in varying ratios. The produced samples were cured using standard methods and kept in MgSO4 and Na2SO4 solutions for specific periods of time, and their mechanical performance and microstructural properties were evaluated. As a result of the tests performed on the concrete specimens obtained, it was found that 5% and 10% GP substitution provided maximum performance. The originality of the study is the feasibility of reducing the amount of cement while maintaining the performance of lightweight concrete and it is thought to contribute significantly to sustainability studies. In addition, the use of GP in concrete production reduces material weight, contributes to sustainable construction practices and offers a viable alternative in lightweight concrete production.

  • Open Access

    Efficient Utilization of Almond Shell Biochar and Silica Fume for Normal Strength Concrete to Develop Eco-Friendly Concrete

    by Merve Esen Tanrikulu, Tuba Demir

    The aim of this study is to investigate the potential use of rapidly increasing agricultural wastes in concrete production by substituting them for cement, thereby reducing their environmental impact and producing eco-friendly concrete. For this purpose, concrete samples were produced using a combination of almond shell biomass (ASB) and silica fume (SF). These samples were subjected to standard compressive strength tests as well as ultrasonic pulse velocity (UPV), porosity (P), and maturity (M) tests. In addition, the microstructure of the samples containing ASB and SF was examined using scanning electron microscopy (SEM). The test results show that the combined use of ASB and SF in concrete production significantly improves the strength properties, and the best results were obtained from the ASB6SF10 series. A significant increase of 37.7% was observed in the compressive strength values of the ASB6SF10 series from the early age between 3 and 28 days. UPV and P values were obtained as 4.46 m/s and 10%, respectively. The use of ASB and SF in concrete production has been found to be critically important in terms of the mechanical and physical properties of concrete and environmental benefits. The results of the study show that ASB and SF have potential for use in concrete production and can contribute to more sustainable concrete production, waste management, and the circular economy by reducing the negative environmental impacts arising from this production.


  • Open Access

    Evaluation of the Use of Waste Almond Shell Ash in Concrete: Mechanical and Environmental Properties

    by Tuba Demir

    This study focuses on the use of almond shell ash (ASA) obtained from agricultural waste through the pyrolysis process in concrete production while, at the same time, presenting an environmentally sustainable design. For this purpose, ASA was obtained from the biomass energy facilities (BEF) for use in concrete mixes. A total of 25 concrete series were prepared, including 1 control series. In these series, 5%, 10%, 15% silica fume (SF), 5%, 10% metakaolin (MK), and 1%, 3%, 5%, and 7% ratios of ASA were chosen to be substituted by volume with cement. Fresh and hardened concrete tests were performed on the specimens. Experiments have shown that the use of ASA in concrete production improves concrete performance up to a certain extent. With the data obtained from the test results, performance evaluation was performed in the artificial neural network. Because of this evaluation, a mathematical model able to predict the concrete compressive strength with high accuracy was developed. To evaluate the effectiveness of the developed model, it was tested again on control specimens to confirm its accuracy and applicability. A life cycle assessment (LCA) was also performed. The aim is to make a new contribution to the literature and practical application with the method to be developed because of the study and to pioneer future studies in this field.


  • Open Access

    Evaluation of the Use of Waste Almond Shell Ash in Concrete: Mechanical and Environmental

    by Tuba Demir

    This study focuses on the use of almond shell ash (ASA) obtained from agricultural waste through the pyrolysis process in concrete production while at the same time presenting an environmentally sustainable design. For this purpose, ASA was obtained from the Biomass Energy Facilities (BES) for use in concrete mixes. A total of 25 concrete series were prepared, including 1 control series. In these series, 8%, 10%, 12% silica fume (SF), 5%, 10% metakaolin (MK) and 1%, 3%, 5% and 7% ratios of ASA were chosen to be substituted by volume with cement. Fresh and hardened concrete tests were performed on the specimens. With the data obtained from the test results, performance evaluation was performed in the artificial neural network. Because of this evaluation, a mathematical model that predicts the concrete compressive strength with high accuracy was developed. To evaluate the effectiveness of the developed model, it was tested again on control specimens to confirm its accuracy and applicability. A life cycle assessment (LCA) was also performed. It is aimed to make a new contribution to the literature and practical application with the method to be developed because of the study and to pioneer future studies in this field. In addition, this study demonstrates to researchers that the use of agricultural waste types in concrete production can be further diversified to improve the environmental impact of concrete in the production process and contribute to sustainability Key Words: Almond shell ash; concrete; bioenergy; life cycle assessment; sustainability.


  • Development of Numerical Models to Predict the Compressive Strength of High Strength Concretes Based on Maturity Method

    by Tuba Demir, Kürşat Esat Alyamaç

    The aim of this study was to develop numerical models to predict the compressive strength of HSCs using Nurse-Saul and Arrhenius (NS-Arr) maturity functions. For this purpose, 9 concrete series with different concrete mix ratios of 400-450-500 kg/m3 binder dosage were produced. Silica fume was used instead of cement at the rate of 5-10-15% by volume and marble powder was used instead of fine aggregate at the rate of 8-10-12% by volume. While the specimens were kept in standard water curing, the temperature values were measured every 5 minutes at the end of the 1st, 3rd, 7th, 14th and 28th days to be used in the maturity test and the results were transferred to the computer. The compressive strength test was also performed in the same time periods. The data obtained from the test results were analyzed and a separate numerical model was developed for each maturity function applied. In addition, with the use of these models, it is thought that concrete compressive strength will be predicted with high accuracy in a short time, the project-work plan will be carried out without loss of time and environmental sustainability will be contributed.


  • Open Access

    Artificial neural network evaluation of concrete performance exposed to elevated temperature with destructive–non-destructive tests

    by Tuba Demir, Zeynep Bala Duranay, Bahar Demirel, Busra Yildirim

    In this study, it is aimed to predict the performance of concretes obtained by using supplementary cementitious materials (SCM) before and after high temperature using artificial neural network. Thus, in addition to contributing to sustainable development and circular economy by using waste materials in concrete production, predicting concrete strength using artificial neural network without the need for experimental studies will provide a great advantage in practice. In addition, it will also contribute to the literature in terms of determining the optimum amount of metakaolin to be used with fly ash in concrete production. Metakaolin, silica fume and fly ash were used as SCM in different proportions in concrete mixes. Accordingly, a total of 22 concrete series were prepared, one of which was the control series. Porosity, ultrasonic pulse velocity, pressure and tensile strength tests were applied to the series at the end of 7th, 28th and 90th curing periods before high temperature. In order to determine the strength losses after elevated temperature, porosity and compressive strength tests were applied at temperatures of 400, 600 and 800 °C. Mineral additive series showed positive mechanical properties up to 20%. However, it has been observed that the use of fly ash after a certain rate causes a decrease in strength. After elevated temperature, strength loss was observed in all series due to the increase in temperature, while it was observed that the rate of being affected by elevated temperature decreased as the percentage of metakaolin increased. Optimum mineral additive usage percentages were determined as 10% fly ash and 15% metakaolin. On the other hand, the use of mineral additives above the optimum level caused the performance of the concrete to decrease. Then, the concrete compression strengths obtained at 7th, 28th, and 90th days and at 400, 600 and 800 °C temperatures are taken as the outputs of the ANN. The artificial neural network provided the closest results to experimental data. Moreover, to prove the predictive performance of ANN, a comparative analysis was made with GPR, SVM and LR and the smallest value of the RMSE value is obtained with the ANN model. Finally, a fivefold cross-validation criteria was used to objectively present the performance of the model.


  • Open Access

    ATIK CAM TOZU KATKILI BETONLARIN YÜKSEK SICAKLIK ALTINDAKİ PERFORMANSLARININ İNCELENMESİ

    by Tuba Demir, Bahar Demirel, Ayşe Çiğdem Şireci

    Bu çalışmanın amacı atık cam tozu kullanılarak üretilen betonların yüksek sıcaklık öncesi ve sonrası dayanım performanslarındaki değişimini araştırmaktır. Bu doğrultuda, farklı atık cam tozu ikame oranı içeren 6 farklı beton karışım serisi hazırlanmıştır. Üretilen beton serileri üzerinde mekanik testler içeren deneysel bir program yürütülmüştür. Kür süresini tamamlayan beton serileri, sırasıyla 400 oC, 600 oC, 800 oC’de, 1 saat yüksek sıcaklıkta bekletilmiştir. Bu beton gruplarının yüksek sıcaklık sonrası basınç dayanımı kayıpları belirlenmiştir. Betonda atık cam tozu ikamesinin artmasıyla betonun mekanik özelliklerinde azalma görülmüştür. Öte yandan en iyi sonuç cam tozu oranının %10 oranında kullanıldığı serilerde gözlenmiştir. Betonda cam tozu oranının %10’a kadar kullanımının betonun performansını arttırdığı gözlenmiştir. Sonuç olarak, atık atık cam tozunun yüksek sıcaklığa dayanıklı beton üretiminde çimento ikame malzemesi olarak kullanılabileceği görülmüştür. Çimento miktarında yapılacak bu azaltma ile karbon ayak izi azaltılmış daha çevreci bir beton üretiminin mümkün olabileceği görülmüştür. Ayrıca beton üretiminde atık cam tozu kullanımının, atık yönetimine çözüm ve döngüsel ekonomiye katkı sağlayarak inşaat sektörü için potansiyel bir seçenek haline gelmektedir.

  • Valorisation of the Effect of Waste Aluminum Sawdust on Concrete: Durability Characteristics and Environmental Impacts

    by Tuba Demi̇r, Bahar Demi̇rel, Melek Öztürk

    The aim of this study is to examine the effect of replacing waste aluminum sawdust (AS) with fine aggregate on the strength and durability properties of concrete. For this, concrete mixtures with a cement dosage of 400 kg/m3, water/cement (W/C) ratio of 0.40-0.50-0.60 were prepared. Aluminum sawdust obtained from Elazığ industrial site was added to the concrete mixtures by replacing 0%, 0.5% and 1% fine aggregate by volume. After curing in the curing pool for 28 days, the produced concrete samples were placed in the carbonation tank and exposed to the accelerated carbonation test in three different time periods as the 1st, 3rd and 7th days. Tests of compressive strength, splitting tensile strength, ultrasound transmission velocity, porosity and carbonation depth were performed on concrete samples before and after carbonation. The samples that were exposed to carbonation were compared with the samples that did not undergo carbonation. In addition, the microstructure of AS concrete was investigated using scanning electron microscopic images (SEM). In the microscopic images, larger cracks, openings and interfacial voids were observed in the concrete matrix with the addition of AS. However, due to the formation of ettringite in these gaps and cracks after carbonation, the cavities became smaller. As a result of the experiments, it was observed that the optimum W/C ratio was 40% and the AS amount was 0.5% in the use of AS in concrete. In addition, it was found that the carbonation effect improves the compressive and splitting tensile strength and increases the ultrasound transmission rate. Finally, life cycle assessment (LCA) was conducted to evaluate the environmental impacts of the prepared concrete samples. Considering the large amount of natural aggregate consumption, it is thought that the use of waste materials in concrete will provide environmental and economic benefits.


  • Yüksek Dayanımlı Betonların Yarmada Çekme Dayanımlarının TYM Tabanlı Tahmini

    by Tuba Demi̇r, Muhammed Ulucan, Kürşat Esat Alyamaç

    Bu çalışmada yüksek dayanımlı betonların erken yaş yarmada çekme dayanım sonuçlarının kapsamlı değerlendirilmesi sunulmaktadır. Bunun için çimento ile hacimce %5, %10 ve 15 oranlarında silis dumanı ve ince agrega ile hacimce %8, %10 ve %12 oranlarında mermer tozu yer değiştirilerek 72 seri beton karışımı hazırlanmıştır. Hazırlanan bu karışımlarda Su/Çimento (S/C) oranları 0.20-0.25-0.30 ve çimento dozajı ise 400-450-500 kg/m3 olarak seçilmiştir. Elde edilen numunelere 3. ve 7. günlerde yarmada çekme dayanımı testi uygulanmıştır. Bu testler sonucunda alınan veriler tepki yüzeyi metodu (TYM) kullanılarak analiz edilmiştir. Analiz sonucunda yarmada çekme dayanımını tahmin eden matematiksel modeller geliştirilmiştir. Geliştirilen matematiksel modellerin doğruluğunun tespiti için 9 adet kontrol serisi hazırlanmış ve modelin tahmin sonuçları ile karşılaştırılmıştır. Bunun sonucunda bağıl hata oranları (BHO) hesaplanarak geliştirilen matematiksel model doğrulanmıştır.