Alana Rossen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alana Rossen has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Tom Breugelmans
University of Antwerp
6 shared publications - Nick Daems
Applied Electrochemistry and Catalysis (ELCAT), University of Antwerp, 2610 Wilrijk, Belgium
5 shared publications - Daniel Choukroun
University of Antwerp
4 shared publications - Sara Bals
University of Antwerp
2 shared publications - Daniel Arenas Esteban
Electron Microscopy for Materials Science (EMAT), University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp, Belgium
1 shared publication - Deepak Pant
Electrochemistry Excellence Centre (ELEC), Materials & Chemistry Unit, Flemish Institute for Technological Research (VITO), Boeretang 200, Mol 2400, Belgium
1 shared publication
Latest Publications
- 7 May 2026
- Published by University of Antwerp
Electrochemical CO2 reduction at elevated temperatures
Rising atmospheric CO2 concentrations, driven by human activity, necessitate effective carbon capture and utilization (CCU) technologies. Electrochemical CO2 reduction (CO2RR) is a promising pathway to generate value-added chemicals, yet industrial applications will likely require operating at elevated temperatures. This dissertation investigates how thermal intensification impacts reaction kinetics, mass transport, and system stability within electrochemical reactors. The research encompasses three experimental studies. First, a bismuth-based catalyst was developed to address surface degradation at high temperatures. By incorporating a mesoporous carbon additive, the study demonstrated that the catalyst’s structure could be preserved at 85C, resulting in enhanced long-term operational stability. Second, the work addressed the challenge of flooding in gas diffusion electrodes (GDE), a common temperature-induced issue. By optimizing the differential pressure between the gas and liquid phases, specifically within a 0-40 mbar range, the triple-phase boundary was stabilized, increasing the faradaic efficiency toward formate from 40% to 65% over 24 hours. The third study pivoted to electrochemical CO reduction using a copper-based catalyst in a zero-gap electrolyzer, which avoids the salt formation challenges associated with CO2. This investigation isolated the effects of temperature on thermodynamics and product distribution. While temperature influence on product distribution was limited, it significantly reduced the crossover of liquid products through the membrane, a critical insight for industrial scalability. Collectively, these studies reveal that elevated temperatures fundamentally alter the electrochemical environment, impacting solubility, local pH, kinetics, and material stability. By uncovering how these variables interact with catalyst design and reactor architecture, this dissertation provides essential practical insights for the engineering of future thermally intensified electrochemical systems.
- 7 May 2026
- Published by University of Antwerp
Electrochemical CO2 reduction at elevated temperatures
Rising atmospheric CO2 concentrations, driven by human activity, necessitate effective carbon capture and utilization (CCU) technologies. Electrochemical CO2 reduction (CO2RR) is a promising pathway to generate value-added chemicals, yet industrial applications will likely require operating at elevated temperatures. This dissertation investigates how thermal intensification impacts reaction kinetics, mass transport, and system stability within electrochemical reactors. The research encompasses three experimental studies. First, a bismuth-based catalyst was developed to address surface degradation at high temperatures. By incorporating a mesoporous carbon additive, the study demonstrated that the catalyst’s structure could be preserved at 85C, resulting in enhanced long-term operational stability. Second, the work addressed the challenge of flooding in gas diffusion electrodes (GDE), a common temperature-induced issue. By optimizing the differential pressure between the gas and liquid phases, specifically within a 0-40 mbar range, the triple-phase boundary was stabilized, increasing the faradaic efficiency toward formate from 40% to 65% over 24 hours. The third study pivoted to electrochemical CO reduction using a copper-based catalyst in a zero-gap electrolyzer, which avoids the salt formation challenges associated with CO2. This investigation isolated the effects of temperature on thermodynamics and product distribution. While temperature influence on product distribution was limited, it significantly reduced the crossover of liquid products through the membrane, a critical insight for industrial scalability. Collectively, these studies reveal that elevated temperatures fundamentally alter the electrochemical environment, impacting solubility, local pH, kinetics, and material stability. By uncovering how these variables interact with catalyst design and reactor architecture, this dissertation provides essential practical insights for the engineering of future thermally intensified electrochemical systems.
- 25 April 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (18) , 8525-8533
Effects of Elevated Temperatures and Catalyst Layer Morphology on the Carbon Balance during Electrochemical CO Reduction
- 25 April 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (18) , 8525-8533
Effects of Elevated Temperatures and Catalyst Layer Morphology on the Carbon Balance during Electrochemical CO Reduction
- 1 October 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (10) , 106502
Carbon-Modified Bismuth Catalysts for CO2 Electrolysis at Elevated Temperature: Insights and Challenges
The electrochemical CO2 reduction (CO2RR) holds promise for sustainable fuel and chemical production, but faces challenges in maintaining catalyst stability under industrial conditions, particularly at elevated temperatures. This study investigates CO2RR performance at 85 °C using three types of carbon-based bismuth catalyst in a flow-by electrolyzer. Elevated temperatures accelerate degradation processes, making long-term operation difficult. We synthesized and tested catalysts where carbon serves as a structural support to disperse and stabilize Bi-based particles. While commercial bismuth oxide nanoparticles initially exhibit high selectivity toward formate (85%), their faradaic efficiency (FE) declined by 20% over 24 h. In contrast, Bi@C, where carbon acts as a porous support material to anchor nanoparticles and enhance dispersion, showed greater structural resilience, maintaining 75% initial selectivity with only a 10% drop over the same period. Post-electrolysis scanning electron microscopy (SEM) and high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) further confirmed that Bi@C underwent only minor morphological changes compared to its carbon-free counterpart, thereby explaining its enhanced stability. These findings provide insights into the role of carbon in stabilizing electrocatalysts at elevated temperatures, underscoring the required advancements to enable long-term CO2 electrolysis under industrially relevant conditions of temperature and current density.
- 1 October 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (10) , 106502
Carbon-Modified Bismuth Catalysts for CO2 Electrolysis at Elevated Temperature: Insights and Challenges
The electrochemical CO2 reduction (CO2RR) holds promise for sustainable fuel and chemical production, but faces challenges in maintaining catalyst stability under industrial conditions, particularly at elevated temperatures. This study investigates CO2RR performance at 85 °C using three types of carbon-based bismuth catalyst in a flow-by electrolyzer. Elevated temperatures accelerate degradation processes, making long-term operation difficult. We synthesized and tested catalysts where carbon serves as a structural support to disperse and stabilize Bi-based particles. While commercial bismuth oxide nanoparticles initially exhibit high selectivity toward formate (85%), their faradaic efficiency (FE) declined by 20% over 24 h. In contrast, Bi@C, where carbon acts as a porous support material to anchor nanoparticles and enhance dispersion, showed greater structural resilience, maintaining 75% initial selectivity with only a 10% drop over the same period. Post-electrolysis scanning electron microscopy (SEM) and high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) further confirmed that Bi@C underwent only minor morphological changes compared to its carbon-free counterpart, thereby explaining its enhanced stability. These findings provide insights into the role of carbon in stabilizing electrocatalysts at elevated temperatures, underscoring the required advancements to enable long-term CO2 electrolysis under industrially relevant conditions of temperature and current density.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (47) , 2647
(Invited) Enhancing Stability for Elevated Temperature CO2 Electrolysis: Insights from Catalyst Development and Impact of Carbon Protection
While most lab-scale CO2 reduction experiments are conducted at ambient temperatures (20-25°C), maintaining such low temperatures at an industrial scale will become challenging due to joule heating. In our study, we pushed the boundaries further than the already existing systems, opting for a higher temperature of 85°C for CO2 reduction. This deliberate choice was made to accentuate the deviations from ambient conditions and explore their effects on CO2 electrolyzers. Our current emphasis at elevated temperatures focuses on catalyst development, specifically addressing stability issues induced by the increased temperature. Nevertheless, it was soon discovered that several modifications were required to the system, both in terms of cell materials and operational conditions (e.g. gaskets, pressure arrangements, GDE type, etc.) to allow stable operation at 85°C for extended duration and especially to avoid flooding. Prior research provided valuable insights into the multifaceted impacts of elevated temperatures on the electrochemical reduction of CO2, and proof they go beyond catalyst kinetics. With this in mind, we have synthesized a series of bismuth-related nano catalysts, including oxidized, metallic and carbon containing nanoparticles, and have quantitatively evaluated their activity, selectivity towards formate, and stability at 85°C. Preliminary observations suggest that catalysts without carbon exhibit high initial selectivity, but demonstrate diminished stability over a 24-hour timeframe compared to catalysts with a protective carbon layer. Specifically, we observed an initially high faradaic efficiency toward formate of 85% for commercial bismuth oxide nanoparticles, in contrast to 75% for bismuth nanoparticles with carbon. However, over a 24-hour timeframe, the carbon-free catalyst showed a 20% decrease in FE, while for the carbon-containing catalyst this drop was halved in the same timeframe. By evaluating the role of carbon additives (e.g. their oxidation state, pore size, surface area, hydrophobicity, etc.) our results yield valuable insights into the impact of carbon additives on stability and overall performance, especially at elevated temperature. These findings uncovered critical aspects for catalyst design, providing essential knowledge for future larger-scale applications. Moreover, we shed light on the required advancements and remaining challenges for elevated temperature CO2 reduction electrolysis, which we believe will become the predominant mode of operation for CO2 electrolysis in the future. Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (47) , 2647
(Invited) Enhancing Stability for Elevated Temperature CO2 Electrolysis: Insights from Catalyst Development and Impact of Carbon Protection
While most lab-scale CO2 reduction experiments are conducted at ambient temperatures (20-25°C), maintaining such low temperatures at an industrial scale will become challenging due to joule heating. In our study, we pushed the boundaries further than the already existing systems, opting for a higher temperature of 85°C for CO2 reduction. This deliberate choice was made to accentuate the deviations from ambient conditions and explore their effects on CO2 electrolyzers. Our current emphasis at elevated temperatures focuses on catalyst development, specifically addressing stability issues induced by the increased temperature. Nevertheless, it was soon discovered that several modifications were required to the system, both in terms of cell materials and operational conditions (e.g. gaskets, pressure arrangements, GDE type, etc.) to allow stable operation at 85°C for extended duration and especially to avoid flooding. Prior research provided valuable insights into the multifaceted impacts of elevated temperatures on the electrochemical reduction of CO2, and proof they go beyond catalyst kinetics. With this in mind, we have synthesized a series of bismuth-related nano catalysts, including oxidized, metallic and carbon containing nanoparticles, and have quantitatively evaluated their activity, selectivity towards formate, and stability at 85°C. Preliminary observations suggest that catalysts without carbon exhibit high initial selectivity, but demonstrate diminished stability over a 24-hour timeframe compared to catalysts with a protective carbon layer. Specifically, we observed an initially high faradaic efficiency toward formate of 85% for commercial bismuth oxide nanoparticles, in contrast to 75% for bismuth nanoparticles with carbon. However, over a 24-hour timeframe, the carbon-free catalyst showed a 20% decrease in FE, while for the carbon-containing catalyst this drop was halved in the same timeframe. By evaluating the role of carbon additives (e.g. their oxidation state, pore size, surface area, hydrophobicity, etc.) our results yield valuable insights into the impact of carbon additives on stability and overall performance, especially at elevated temperature. These findings uncovered critical aspects for catalyst design, providing essential knowledge for future larger-scale applications. Moreover, we shed light on the required advancements and remaining challenges for elevated temperature CO2 reduction electrolysis, which we believe will become the predominant mode of operation for CO2 electrolysis in the future. Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (24) , 1326
Optimization of Flow-By CO2 Electrolyzers: Impact of Differential Pressure and Gas Diffusion Layer Composition
The electrochemical reduction of CO2 (eCO2R) into valuable chemicals offers a great ecological solution to lower anthropogenic CO2 in the atmosphere, since it can close the carbon cycle by utilizing renewable energy, resulting in a sustainable carbon recycling system. Consequently, it has gathered significant scientific interest over the past decade [1,2]. However, to make significant progress towards making the process industrially feasible, it would be beneficial to replace the typical anodic oxygen evolution reaction at the counter electrode with an economically more interesting one, like alkane dehydrogenation, while at the same time lowering cell potential and increasing energy efficiency. However, this requires the CO2 reduction to operate efficiently at elevated temperatures (up to 100°C) [3]. Unfortunately, little is known on the impact of elevated temperatures on the overall performance of CO2 electrolyzers and its components. In this research, we studied the effect of increasing the temperature on CO2 electrolyzers to ultimately enable selective and stable eCO2R to formic acid not only at room temperature. Heating the system leads to many changes (e.g. decreased electrolyte surface tension, decreased hydrophobicity of the gas diffusion layer (GDL), lower dissolved CO2 content and, increased CO2 diffusion coefficient), all affecting the performance of a conventional CO2 electrolyzer, consequently raising the need for re-evaluating many of its components and their configuration, considering they have been optimized for operation at ambient conditions. Specifically, we focused on the three-phase boundary, where the eCO2R reaction actually takes place. Logically, it is important that this boundary is at the exact location of the catalyst layer (CL), as the catalyst is the active species towards the desired reaction. To this end, GDLs are specifically designed to align this boundary to the right location through variations in hydrophobic additives, thickness, porosity, etc. However, we have found that all these efforts to perfect the GDL's properties can be forfeited if the differential pressure across it were to change as it shifts the three-phase boundary. A shift inwards the GDL will result in a flooded CL, lengthening the diffusion path of the gaseous CO2 in the electrolyte to the active sites of the CL resulting in increased hydrogen evolution. A shift outward the GDL will result in a CL that is not fully used, as such lowering the activity. Since the CL is a thin layer, it can be easily understood that the margin within which the boundary can shift without becoming catastrophic for the overall performance is very small, making it extremely critical to have precise control over its position. Changing the temperature of the system will affect the location of the boundary layer and by optimizing the differential pressure we can shift its location back to its optimal position and increase the performance of the CO2 electrolyzer. We investigated the influence of deliberately altering the differential pressure across a GDE in a flow-by electrolyzer with Bi2O3 nanoparticles for the eCO2R towards formate, at different temperatures. At higher temperatures (i.e. 85°C), flooding was a pronounced problem, which resulted in a rapid decrease of performance, and after 24 hours of electrolysis only a 40% faradaic efficiency towards formate (FEHCOOH) was maintained from the initial 70%. We discovered that by increasing the differential pressure, by elevating the backpressure at the gas side, we could limit flooding of the GDE. By mitigating the flooding, the system was able to maintain a better performance, i.e. FEHCOOH of 65% after 24 hours of electrolysis was maintained, which is a 1.6 factor increase (Figure). The present findings confirm that, without altering any of the more significant electrochemical aspects of the electrolyzer, it is possible to increase performance by solely varying the differential pressure over the GDE, showing the importance of also optimizing the operational conditions. Once the optimal differential pressure of the system was established, it was still necessary to investigate the GDE structure itself. Indeed, the GDE should be designed to appropriately mediate all transport processes necessary to achieve high eCO2R performance and further reduce flooding phenomena, by favourably affecting CO2 transport, local pH and water transport [4]. Therefore, the next step was to investigate and compare other commercially available GDLs. For this research we selected commercially available GDLs that are primarily used in high-temperature proton exchange fuel cells, since their required characteristics (hydrophobicity, thickness and pore structure) are similar to the needs of our system. By re-evaluating and optimizing these (operational) conditions, we are getting closer to making the electrochemical CO2 reduction efficient, also at elevated temperatures. [1] https://doi.org/10.1016/j.petlm.2016.11.003 [2] https://doi.org/10.1016/j.joule.2017.09.003 [3] https://doi.org/10.1002.celc.201900872 [4] https://doi.org/10.1038/s41578-021-00356-2 Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (24) , 1326
Optimization of Flow-By CO2 Electrolyzers: Impact of Differential Pressure and Gas Diffusion Layer Composition
The electrochemical reduction of CO2 (eCO2R) into valuable chemicals offers a great ecological solution to lower anthropogenic CO2 in the atmosphere, since it can close the carbon cycle by utilizing renewable energy, resulting in a sustainable carbon recycling system. Consequently, it has gathered significant scientific interest over the past decade [1,2]. However, to make significant progress towards making the process industrially feasible, it would be beneficial to replace the typical anodic oxygen evolution reaction at the counter electrode with an economically more interesting one, like alkane dehydrogenation, while at the same time lowering cell potential and increasing energy efficiency. However, this requires the CO2 reduction to operate efficiently at elevated temperatures (up to 100°C) [3]. Unfortunately, little is known on the impact of elevated temperatures on the overall performance of CO2 electrolyzers and its components. In this research, we studied the effect of increasing the temperature on CO2 electrolyzers to ultimately enable selective and stable eCO2R to formic acid not only at room temperature. Heating the system leads to many changes (e.g. decreased electrolyte surface tension, decreased hydrophobicity of the gas diffusion layer (GDL), lower dissolved CO2 content and, increased CO2 diffusion coefficient), all affecting the performance of a conventional CO2 electrolyzer, consequently raising the need for re-evaluating many of its components and their configuration, considering they have been optimized for operation at ambient conditions. Specifically, we focused on the three-phase boundary, where the eCO2R reaction actually takes place. Logically, it is important that this boundary is at the exact location of the catalyst layer (CL), as the catalyst is the active species towards the desired reaction. To this end, GDLs are specifically designed to align this boundary to the right location through variations in hydrophobic additives, thickness, porosity, etc. However, we have found that all these efforts to perfect the GDL's properties can be forfeited if the differential pressure across it were to change as it shifts the three-phase boundary. A shift inwards the GDL will result in a flooded CL, lengthening the diffusion path of the gaseous CO2 in the electrolyte to the active sites of the CL resulting in increased hydrogen evolution. A shift outward the GDL will result in a CL that is not fully used, as such lowering the activity. Since the CL is a thin layer, it can be easily understood that the margin within which the boundary can shift without becoming catastrophic for the overall performance is very small, making it extremely critical to have precise control over its position. Changing the temperature of the system will affect the location of the boundary layer and by optimizing the differential pressure we can shift its location back to its optimal position and increase the performance of the CO2 electrolyzer. We investigated the influence of deliberately altering the differential pressure across a GDE in a flow-by electrolyzer with Bi2O3 nanoparticles for the eCO2R towards formate, at different temperatures. At higher temperatures (i.e. 85°C), flooding was a pronounced problem, which resulted in a rapid decrease of performance, and after 24 hours of electrolysis only a 40% faradaic efficiency towards formate (FEHCOOH) was maintained from the initial 70%. We discovered that by increasing the differential pressure, by elevating the backpressure at the gas side, we could limit flooding of the GDE. By mitigating the flooding, the system was able to maintain a better performance, i.e. FEHCOOH of 65% after 24 hours of electrolysis was maintained, which is a 1.6 factor increase (Figure). The present findings confirm that, without altering any of the more significant electrochemical aspects of the electrolyzer, it is possible to increase performance by solely varying the differential pressure over the GDE, showing the importance of also optimizing the operational conditions. Once the optimal differential pressure of the system was established, it was still necessary to investigate the GDE structure itself. Indeed, the GDE should be designed to appropriately mediate all transport processes necessary to achieve high eCO2R performance and further reduce flooding phenomena, by favourably affecting CO2 transport, local pH and water transport [4]. Therefore, the next step was to investigate and compare other commercially available GDLs. For this research we selected commercially available GDLs that are primarily used in high-temperature proton exchange fuel cells, since their required characteristics (hydrophobicity, thickness and pore structure) are similar to the needs of our system. By re-evaluating and optimizing these (operational) conditions, we are getting closer to making the electrochemical CO2 reduction efficient, also at elevated temperatures. [1] https://doi.org/10.1016/j.petlm.2016.11.003 [2] https://doi.org/10.1016/j.joule.2017.09.003 [3] https://doi.org/10.1002.celc.201900872 [4] https://doi.org/10.1038/s41578-021-00356-2 Figure 1
- 11 December 2023
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (2)
Improved Vanadium Flow Battery Performance through a Pulsating Electrolyte Flow Regime
The interest in flow batteries as energy storage devices is growing due to the rising share of intermittent renewable energy sources. In this work, the performance of a vanadium flow battery is improved, without altering the electrochemical cell, by applying a pulsating flow. This novel flow battery flow regime aims to enhance performance by improving its mass transfer properties. Both the pulse volume and frequency have an influence on the battery performance, and lead to a 38.7 % increase in accessible discharge capacity compared to the conventional steady flow regime at values of 0.40 cm3 and 2.4 Hz in this cell, respectively. Furthermore, at these parameter settings a reduction of the mass transfer resistance by 71.4 % is achieved at 0.2 cm3/min ⋅ cm2. These results show that a pulsating flow can be beneficial in certain conditions, opening new possibilities for boosting performance in flow batteries.
- 11 December 2023
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (2)
Improved Vanadium Flow Battery Performance through a Pulsating Electrolyte Flow Regime
The interest in flow batteries as energy storage devices is growing due to the rising share of intermittent renewable energy sources. In this work, the performance of a vanadium flow battery is improved, without altering the electrochemical cell, by applying a pulsating flow. This novel flow battery flow regime aims to enhance performance by improving its mass transfer properties. Both the pulse volume and frequency have an influence on the battery performance, and lead to a 38.7 % increase in accessible discharge capacity compared to the conventional steady flow regime at values of 0.40 cm3 and 2.4 Hz in this cell, respectively. Furthermore, at these parameter settings a reduction of the mass transfer resistance by 71.4 % is achieved at 0.2 cm3/min ⋅ cm2. These results show that a pulsating flow can be beneficial in certain conditions, opening new possibilities for boosting performance in flow batteries.
- Open Access
- 15 February 2023
- Published by Wiley in ChemElectroChem
- Vol. 10 (6)
Enhanced Pomegranate‐Structured SnO2 Electrocatalysts for the Electrochemical CO2 Reduction to Formate
Although most state‐of‐the‐art Sn‐based electrocatalysts yield promising results in terms of selectivity and catalyst activity, their stability remains insufficient to date. Here, we demonstrate the successful application of the recently developed pomegranate‐structured SnO2 (Pom. SnO2) and SnO2@C (Pom. SnO2@C) nanocomposite electrocatalysts for the efficient electrochemical conversion of CO2 to formate. With an initial selectivity of 83 and 86 % towards formate and an operating potential of −0.72 V and −0.64 V vs. RHE, respectively, these pomegranate SnO2 electrocatalysts are able to compete with most of the current state‐of‐the‐art Sn‐based electrocatalysts in terms of activity and selectivity. Given the importance of electrocatalyst stability, long‐term experiments (24 h) were performed and a temporary loss in selectivity for the Pom. SnO2@C electrocatalyst was largely restored to its initial selectivity upon drying and exposure to air. Of all the used (24 h) electrocatalysts, the pomegranate SnO2@C had the highest selectivity over a time period of one hour, reaching an average recovered Faradaic efficiency (FE) of 85 %, while the commercial SnO2 and bare pomegranate SnO2 electrocatalysts reached an average of 79 and 80 % FE towards formate, respectively. Furthermore, the pomegranate structure of Pom. SnO2@C was largely preserved due to the presence of the heterogeneous carbon shell, which acts as a protective layer, physically inhibiting particle segregation/pulverisation and agglomeration.
- 15 February 2023
- Published by Wiley in ChemElectroChem
- Vol. 10 (6)
Open AccessEnhanced Pomegranate‐Structured SnO2 Electrocatalysts for the Electrochemical CO2 Reduction to Formate
Although most state‐of‐the‐art Sn‐based electrocatalysts yield promising results in terms of selectivity and catalyst activity, their stability remains insufficient to date. Here, we demonstrate the successful application of the recently developed pomegranate‐structured SnO2 (Pom. SnO2) and SnO2@C (Pom. SnO2@C) nanocomposite electrocatalysts for the efficient electrochemical conversion of CO2 to formate. With an initial selectivity of 83 and 86 % towards formate and an operating potential of −0.72 V and −0.64 V vs. RHE, respectively, these pomegranate SnO2 electrocatalysts are able to compete with most of the current state‐of‐the‐art Sn‐based electrocatalysts in terms of activity and selectivity. Given the importance of electrocatalyst stability, long‐term experiments (24 h) were performed and a temporary loss in selectivity for the Pom. SnO2@C electrocatalyst was largely restored to its initial selectivity upon drying and exposure to air. Of all the used (24 h) electrocatalysts, the pomegranate SnO2@C had the highest selectivity over a time period of one hour, reaching an average recovered Faradaic efficiency (FE) of 85 %, while the commercial SnO2 and bare pomegranate SnO2 electrocatalysts reached an average of 79 and 80 % FE towards formate, respectively. Furthermore, the pomegranate structure of Pom. SnO2@C was largely preserved due to the presence of the heterogeneous carbon shell, which acts as a protective layer, physically inhibiting particle segregation/pulverisation and agglomeration.