Taesoo Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Taesoo Lee has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Jeonghun Kwak
Department of Electrical and Computer Engineering Inter‐university Semiconductor Research Center, and SOFT Foundry Institute Seoul National University Seoul Republic of Korea
10 shared publications - Wan Ki Bae
SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, Republic of Korea
4 shared publications - Beomsoo Chun
Department of Electrical and Computer Engineering, Inter-university Semiconductor Research Center, and Soft Foundry Institute, Seoul National University, 1, Gwanak-ro, Gwanak-gu, Seoul 08826, Republic of Korea
2 shared publications - Donghyo Hahm
Department of Chemical Engineering, Hanyang University, Seoul, Republic of Korea
2 shared publications Doyoon Shin
SKKU Advanced Institute of Nano Technology (SAINT), Sungkyunkwan University, Seobu-ro, Jangan-gu, Suwon-si, 16419 Gyeonggi-do, Republic of Korea
2 shared publicationsGanghyun Park
Department of Electrical and Computer Engineering, Inter-university Semiconductor Research Center, and Soft Foundry Institute, Seoul National University, 1, Gwanak-ro, Gwanak-gu, Seoul 08826, Republic of Korea
2 shared publications
Latest Publications
- 13 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (11) , 5721-5729
ZnSTe/ZnSe/ZnS Reverse Type-I Blue-emitting Quantum Dot Diodes
- 13 March 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (11) , 5721-5729
ZnSTe/ZnSe/ZnS Reverse Type-I Blue-emitting Quantum Dot Diodes
- Open Access
- 6 February 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (4) , 1424-1431
Direct Photolithography of Colloidal InP-Based Quantum Dots Utilizing the Photoligation Method
- 6 February 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (4) , 1424-1431
Open AccessDirect Photolithography of Colloidal InP-Based Quantum Dots Utilizing the Photoligation Method
- 23 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (1) , 1451-1459
High-Performance InP Quantum-Dot Light-Emitting Diodes with a NiOx Nanoparticle-Embedded Hybrid Emissive Layer
Quantum-dot (QD) light-emitting diodes (QLEDs) are garnering significant attention owing to their superb optoelectrical properties, but the overinjection of electrons compared to holes into the emissive layer (EML) is still a critical obstacle to be resolved. Current approaches, such as inserting a charge-balancing interlayer and mixing p-type organic additives into the EML, face issues of process complexity and poor miscibility. In this work, we demonstrate efficient InP QLEDs by simply embedding NiOx nanoparticles (NPs) into the EML which forms a homogeneous QD-metal oxide hybrid EML. Precisely changing the NiOx NPs concentration enables an effective modulation of the valence state of the hybrid EML, while controlling the exciton quenching phenomena stemming from the metal oxide additives. Moreover, the inorganic hybrid EML exhibits superior electrical stability compared to that of typical organic additives. In detail, it possesses an upshifted valence state by approximately 0.2 eV, leading the QLEDs to a 3.7-fold increase in luminance, 1.7-fold improvement in external quantum efficiency, and 3-fold extension in operational half-lifetime, simultaneously. Comprehensive analyses on the optoelectrical and morphological characteristics confirm that the hybrid EML is suitable for realizing efficient and stable InP QLEDs via a simple fabrication method. Therefore, we expect that this approach would provide valuable insights into the development of high-performance and low-cost QLEDs.
- 23 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (1) , 1451-1459
High-Performance InP Quantum-Dot Light-Emitting Diodes with a NiOx Nanoparticle-Embedded Hybrid Emissive Layer
Quantum-dot (QD) light-emitting diodes (QLEDs) are garnering significant attention owing to their superb optoelectrical properties, but the overinjection of electrons compared to holes into the emissive layer (EML) is still a critical obstacle to be resolved. Current approaches, such as inserting a charge-balancing interlayer and mixing p-type organic additives into the EML, face issues of process complexity and poor miscibility. In this work, we demonstrate efficient InP QLEDs by simply embedding NiOx nanoparticles (NPs) into the EML which forms a homogeneous QD-metal oxide hybrid EML. Precisely changing the NiOx NPs concentration enables an effective modulation of the valence state of the hybrid EML, while controlling the exciton quenching phenomena stemming from the metal oxide additives. Moreover, the inorganic hybrid EML exhibits superior electrical stability compared to that of typical organic additives. In detail, it possesses an upshifted valence state by approximately 0.2 eV, leading the QLEDs to a 3.7-fold increase in luminance, 1.7-fold improvement in external quantum efficiency, and 3-fold extension in operational half-lifetime, simultaneously. Comprehensive analyses on the optoelectrical and morphological characteristics confirm that the hybrid EML is suitable for realizing efficient and stable InP QLEDs via a simple fabrication method. Therefore, we expect that this approach would provide valuable insights into the development of high-performance and low-cost QLEDs.
- 19 December 2024
- Published by Elsevier in Organic Electronics
- Vol. 138
Investigation of excess charge carriers and optimization of InP quantum-dot light-emitting diodes using self-assembled monolayers
- 19 December 2024
- Published by Elsevier in Organic Electronics
- Vol. 138
Investigation of excess charge carriers and optimization of InP quantum-dot light-emitting diodes using self-assembled monolayers
- 18 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (1) , 307-314
Cd-Free Quantum-Dot Light-Emitting Diodes through Nanometer-Thick ZnS/ZnMgO Double-Electron Transport Layers
- 18 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (1) , 307-314
Cd-Free Quantum-Dot Light-Emitting Diodes through Nanometer-Thick ZnS/ZnMgO Double-Electron Transport Layers
- 15 November 2024
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 11 (12) , 5050-5060
Recent Advances in Light Outcoupling from Quantum-Dot Light-Emitting Diodes
- 15 November 2024
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 11 (12) , 5050-5060
Recent Advances in Light Outcoupling from Quantum-Dot Light-Emitting Diodes
- 9 February 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (12)
Angle‐Independent Top‐Emitting Quantum‐Dot Light‐Emitting Diodes Using a Solution‐Processed Subwavelength Scattering–Capping Layer
Owing to the excellent optoelectronic properties of colloidal quantum dots (QDs), light‐emitting diodes based on QDs (QLEDs) have been considered one of the most promising electroluminescence (EL) devices for full‐color displays with a wide color gamut. Particularly, top‐emission device architecture has been of interest to both academia and industry, because of the advantages in light outcoupling, aperture ratios, and integration with conventional backplanes. In this structure, however, angle‐dependent color shifts originating from a variation in microcavity length are a critical issue that needs to be resolved. Here, a solution‐processed dual‐functional scattering–capping layer (SCPL) using ZnO nanoparticles on top‐emitting QLEDs with ZnSeTe/ZnSe/ZnS QDs to modulate the optical interference is presented. By precisely controlling the thickness of the SCPL, the EL intensity and spectrum can be redistributed to produce a uniform color from any viewing angle. It is discovered that, unlike conventional CPLs, the formation of random nanocracks and nanoclusters in the SCPL adds subwavelength light‐scattering capabilities, which promotes light extraction. The QLEDs with the solution‐processed SCPL exhibit a 44% increase in the maximum external quantum efficiency, with completely imperceptible angle‐dependent spectral shifts. The SCPL is expected to be applied to the development of high‐performance and next‐generation QLED displays.
- 9 February 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (12)
Angle‐Independent Top‐Emitting Quantum‐Dot Light‐Emitting Diodes Using a Solution‐Processed Subwavelength Scattering–Capping Layer
Owing to the excellent optoelectronic properties of colloidal quantum dots (QDs), light‐emitting diodes based on QDs (QLEDs) have been considered one of the most promising electroluminescence (EL) devices for full‐color displays with a wide color gamut. Particularly, top‐emission device architecture has been of interest to both academia and industry, because of the advantages in light outcoupling, aperture ratios, and integration with conventional backplanes. In this structure, however, angle‐dependent color shifts originating from a variation in microcavity length are a critical issue that needs to be resolved. Here, a solution‐processed dual‐functional scattering–capping layer (SCPL) using ZnO nanoparticles on top‐emitting QLEDs with ZnSeTe/ZnSe/ZnS QDs to modulate the optical interference is presented. By precisely controlling the thickness of the SCPL, the EL intensity and spectrum can be redistributed to produce a uniform color from any viewing angle. It is discovered that, unlike conventional CPLs, the formation of random nanocracks and nanoclusters in the SCPL adds subwavelength light‐scattering capabilities, which promotes light extraction. The QLEDs with the solution‐processed SCPL exhibit a 44% increase in the maximum external quantum efficiency, with completely imperceptible angle‐dependent spectral shifts. The SCPL is expected to be applied to the development of high‐performance and next‐generation QLED displays.
- 24 October 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (48) , e2304717
Optimum Design Configuration of Thin‐Film Transistors and Quantum‐Dot Light‐Emitting Diodes for Active‐Matrix Displays
Active matrix (AM) quantum‐dot light‐emitting diodes (QLEDs) driven by thin‐film transistors (TFTs) have attracted significant attention for use in next‐generation displays. Several challenges remain for the realisation of AM‐QLEDs, such as device design, fabrication process, and integration between QLEDs and TFTs, depending on their device structures and configurations. Herein, efficient and stable AM‐QLEDs are demonstrated using conventional and inverted structured QLEDs (C‐ and I‐QLEDs, respectively) combined with facile type‐convertible (p‐ and n‐type) single‐walled carbon nanotube (SWNT)‐based TFTs. Based on the four possible configurations of the QLED–TFT subpixel, the performance of the SWNT TFT‐driven QLEDs and the fabrication process to determine the ideal configuration are compared, taking advantage of each structure for AM‐QLEDs. The QLEDs and TFTs are also optimized to maximise the performance of the AM‐QLEDs—the inner shell composition of quantum dots and carrier type of TFTs—resulting in a maximum external quantum efficiency and operational lifetime (at an initial luminance of 100 cd m2) of 21.2% and 38 100 000 h for the C‐QLED, and 19.1% and 133100000 h for the I‐QLED, respectively. Finally, a 5×5 AM‐QLED display array controlled using SWNT TFTs is successfully demonstrated. This study is expected to contribute to the development of advanced AM‐QLED displays.
- 24 October 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (48) , e2304717
Optimum Design Configuration of Thin‐Film Transistors and Quantum‐Dot Light‐Emitting Diodes for Active‐Matrix Displays
Active matrix (AM) quantum‐dot light‐emitting diodes (QLEDs) driven by thin‐film transistors (TFTs) have attracted significant attention for use in next‐generation displays. Several challenges remain for the realisation of AM‐QLEDs, such as device design, fabrication process, and integration between QLEDs and TFTs, depending on their device structures and configurations. Herein, efficient and stable AM‐QLEDs are demonstrated using conventional and inverted structured QLEDs (C‐ and I‐QLEDs, respectively) combined with facile type‐convertible (p‐ and n‐type) single‐walled carbon nanotube (SWNT)‐based TFTs. Based on the four possible configurations of the QLED–TFT subpixel, the performance of the SWNT TFT‐driven QLEDs and the fabrication process to determine the ideal configuration are compared, taking advantage of each structure for AM‐QLEDs. The QLEDs and TFTs are also optimized to maximise the performance of the AM‐QLEDs—the inner shell composition of quantum dots and carrier type of TFTs—resulting in a maximum external quantum efficiency and operational lifetime (at an initial luminance of 100 cd m2) of 21.2% and 38 100 000 h for the C‐QLED, and 19.1% and 133100000 h for the I‐QLED, respectively. Finally, a 5×5 AM‐QLED display array controlled using SWNT TFTs is successfully demonstrated. This study is expected to contribute to the development of advanced AM‐QLED displays.
- 11 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 30 (3: Flexibl) , 1-7
Bright, Flexible, and Waterproof Top-Emitting InP Quantum Dot Light-Emitting Diodes on Al Foil
Quantum dot light-emitting diodes (QLEDs) with high form factor are attracting great attention owing to the superb optoelectrical properties of quantum dots (QDs) and their ubiquitous application, such as wearable displays. However, there have been significant challenges in increasing the brightness of flexible QLEDs due to the inferior thermal conductivity of conventional flexible substrates. In this work, we demonstrate bright, flexible, and waterproof top-emitting QLEDs based on InP/ZnSe/ZnS QDs, which are promising for human-interfaced wearable displays. We adopted an Al foil substrate with high thermal conductivity, which can quickly dissipate the Joule heat generated at high current densities, and a Parylene C/SU-8 bilayer thin-film on both sides of the QLEDs to ensure the surface planarization and to prevent moisture permeation. As a result, the flexible QLED works well even when bent or in contact with water with a maximum luminance of ∼40000 cd/m 2 . We believe that our device design strategies can contribute to the development of next-generation flexible optoelectronics.
- 11 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 30 (3: Flexibl) , 1-7
Bright, Flexible, and Waterproof Top-Emitting InP Quantum Dot Light-Emitting Diodes on Al Foil
Quantum dot light-emitting diodes (QLEDs) with high form factor are attracting great attention owing to the superb optoelectrical properties of quantum dots (QDs) and their ubiquitous application, such as wearable displays. However, there have been significant challenges in increasing the brightness of flexible QLEDs due to the inferior thermal conductivity of conventional flexible substrates. In this work, we demonstrate bright, flexible, and waterproof top-emitting QLEDs based on InP/ZnSe/ZnS QDs, which are promising for human-interfaced wearable displays. We adopted an Al foil substrate with high thermal conductivity, which can quickly dissipate the Joule heat generated at high current densities, and a Parylene C/SU-8 bilayer thin-film on both sides of the QLEDs to ensure the surface planarization and to prevent moisture permeation. As a result, the flexible QLED works well even when bent or in contact with water with a maximum luminance of ∼40000 cd/m 2 . We believe that our device design strategies can contribute to the development of next-generation flexible optoelectronics.
- 16 February 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (8)
Realization of Highly Efficient InP Quantum Dot Light‐Emitting Diodes through In‐Depth Investigation of Exciton‐Harvesting Layers
Quantum dot light‐emitting diodes (QLEDs) are considered promising candidates for several optoelectronic applications; however, they are plagued by the over‐injection of electrons compared to holes, which limits device efficiency. Studies have attempted to reuse the leaked electrons and transfer recombination energies via inserting an exciton‐harvesting layer (EHL) between the emissive layer (EML) and hole transport layer (HTL). This study conducts a detailed analysis of the energy transfer mechanisms to obtain better insights into improving the device performance. First, by analyzing the electroluminescence (EL) spectra and exciton dynamics, the effect of EHLs comprising phosphorescence (PH) or thermally activated delayed fluorescence (TADF) blue dopant is compared. Through parallel incorporation of those EHLs on QLEDs and organic LEDs, the minimal contribution of the PH‐EHL to energy transfer in QLEDs is confirmed, whereas the TADF‐EHL has a significant contribution. Second, highly efficient top‐emission green QLEDs with the TADF‐EHL are achieved. They exhibit a maximum luminance (L) and current efficiency (CE) of 40700 cd m−2 and 68.0 cd A−1, respectively, which are the highest among the reported values for green‐emitting InP QLEDs. The proposed approaches are expected to provide aid in the realization of highly efficient QLEDs from the analysis to the device optimization stage.
- 16 February 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (8)
Realization of Highly Efficient InP Quantum Dot Light‐Emitting Diodes through In‐Depth Investigation of Exciton‐Harvesting Layers
Quantum dot light‐emitting diodes (QLEDs) are considered promising candidates for several optoelectronic applications; however, they are plagued by the over‐injection of electrons compared to holes, which limits device efficiency. Studies have attempted to reuse the leaked electrons and transfer recombination energies via inserting an exciton‐harvesting layer (EHL) between the emissive layer (EML) and hole transport layer (HTL). This study conducts a detailed analysis of the energy transfer mechanisms to obtain better insights into improving the device performance. First, by analyzing the electroluminescence (EL) spectra and exciton dynamics, the effect of EHLs comprising phosphorescence (PH) or thermally activated delayed fluorescence (TADF) blue dopant is compared. Through parallel incorporation of those EHLs on QLEDs and organic LEDs, the minimal contribution of the PH‐EHL to energy transfer in QLEDs is confirmed, whereas the TADF‐EHL has a significant contribution. Second, highly efficient top‐emission green QLEDs with the TADF‐EHL are achieved. They exhibit a maximum luminance (L) and current efficiency (CE) of 40700 cd m−2 and 68.0 cd A−1, respectively, which are the highest among the reported values for green‐emitting InP QLEDs. The proposed approaches are expected to provide aid in the realization of highly efficient QLEDs from the analysis to the device optimization stage.