George Brinklow
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
George Brinklow has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- M. Wu3 shared publications
A. Cova-Bonillo
2 shared publicationsA. Tsolakis
2 shared publications- Athanasios Tsolakis
Department of Mechanical Engineering, School of Engineering, University of Birmingham, Birmingham B15 2TT, UK
2 shared publications J.M. Herreros
2 shared publicationsP. Millington
2 shared publications
Latest Publications
- Open Access
- 26 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
Open wheel competition car rear wing placement and underbody aerodynamic interactions: Aerodynamic design for a competitive advantage in motorsports
Modern, open-wheeled racing cars rely heavily on downforce generated by underbody Venturi tunnels to gain a competitive advantage. While these tunnels are critical to aerodynamic efficiency, their interaction with other components - particularly the rear wing - remains an area worth exploring. This study uses computational fluid dynamics (CFD) to investigate how changing the rear wing’s angle of attack (AoA), defined as the angle between the wing’s chord line and the oncoming airflow, vertical and longitudinal position influences the aerodynamic performance of the underbody and total downforce production. CFD allows for detailed analysis of pressure distribution and flow behaviour, offering insight into how the rear wing affects the efficiency of the Venturi tunnels. Results show that it is important to analyse the underbody and rear wing, both as a system and as separate components, because their individual behaviours do not always reflect their combined effect. In addition, the longitudinal position of the rear wing had the largest impact on the underbody’s performance when compared to the AoA and vertical position. Shifting the rear wing’s position from 5.0 to 5.1 m resulted in an increase in the underbody’s − C L from 1.55 to 2.00. These findings can help engineers to understand better the aerodynamic relationship between the rear wing and underbody, aiding the development of higher-performing race cars. In a competitive motorsport environment where small aerodynamic gains can make a big difference, refining these interactions is key to improving handling, lap times, and sporting performance.
- 26 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
Open AccessOpen wheel competition car rear wing placement and underbody aerodynamic interactions: Aerodynamic design for a competitive advantage in motorsports
Modern, open-wheeled racing cars rely heavily on downforce generated by underbody Venturi tunnels to gain a competitive advantage. While these tunnels are critical to aerodynamic efficiency, their interaction with other components - particularly the rear wing - remains an area worth exploring. This study uses computational fluid dynamics (CFD) to investigate how changing the rear wing’s angle of attack (AoA), defined as the angle between the wing’s chord line and the oncoming airflow, vertical and longitudinal position influences the aerodynamic performance of the underbody and total downforce production. CFD allows for detailed analysis of pressure distribution and flow behaviour, offering insight into how the rear wing affects the efficiency of the Venturi tunnels. Results show that it is important to analyse the underbody and rear wing, both as a system and as separate components, because their individual behaviours do not always reflect their combined effect. In addition, the longitudinal position of the rear wing had the largest impact on the underbody’s performance when compared to the AoA and vertical position. Shifting the rear wing’s position from 5.0 to 5.1 m resulted in an increase in the underbody’s − C L from 1.55 to 2.00. These findings can help engineers to understand better the aerodynamic relationship between the rear wing and underbody, aiding the development of higher-performing race cars. In a competitive motorsport environment where small aerodynamic gains can make a big difference, refining these interactions is key to improving handling, lap times, and sporting performance.
- Open Access
- 21 October 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 187
Predicting NOx emissions from ammonia engines – Fuel and thermal effects
- 21 October 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 187
Open AccessPredicting NOx emissions from ammonia engines – Fuel and thermal effects
- Open Access
- 10 April 2025
- Published by Springer Nature in Automotive Innovation
- Vol. 8 (2) , 508-518
Primary and Secondary Emissions Reduction Using Cylinder Deactivation Strategies for Gasoline Direct Injection Engines in Hybrid Vehicles
Stricter CO2 and local air quality targets are increasing the demand for electrified powertrains including hybrid electric vehicles (HEVs). The impact of an electrified vehicle powertrain on the catalytic performance of the emissions control system presents the challenge of multiple cold/warm starts during vehicle operation. This work investigates advanced energy efficient technologies to understand and enhance the catalytic reduction of primary and secondary emissions under challenging HEV operation conditions. A novel strategy based on the concept of engine cylinder deactivation is experimentally studied at various starting catalyst temperatures aiming to reduce the time required to reach catalyst light-off temperature and thus tailpipe emissions. Unregulated secondary emissions (NH3 and N2O) are also investigated, which are expected to become more pertinent in the future. This work demonstrates that operating under the studied strategy for a short period of time increased TWC temperature by up to 300 °C and reduced mass-based emissions of CO, NO, HCs, N2O and NH3. These findings are significant to inform the optimization of energy efficient catalyst heating strategies for HEVs in order to reduce both primary and secondary emissions.
- 10 April 2025
- Published by Springer Nature in Automotive Innovation
- Vol. 8 (2) , 508-518
Open AccessPrimary and Secondary Emissions Reduction Using Cylinder Deactivation Strategies for Gasoline Direct Injection Engines in Hybrid Vehicles
Stricter CO2 and local air quality targets are increasing the demand for electrified powertrains including hybrid electric vehicles (HEVs). The impact of an electrified vehicle powertrain on the catalytic performance of the emissions control system presents the challenge of multiple cold/warm starts during vehicle operation. This work investigates advanced energy efficient technologies to understand and enhance the catalytic reduction of primary and secondary emissions under challenging HEV operation conditions. A novel strategy based on the concept of engine cylinder deactivation is experimentally studied at various starting catalyst temperatures aiming to reduce the time required to reach catalyst light-off temperature and thus tailpipe emissions. Unregulated secondary emissions (NH3 and N2O) are also investigated, which are expected to become more pertinent in the future. This work demonstrates that operating under the studied strategy for a short period of time increased TWC temperature by up to 300 °C and reduced mass-based emissions of CO, NO, HCs, N2O and NH3. These findings are significant to inform the optimization of energy efficient catalyst heating strategies for HEVs in order to reduce both primary and secondary emissions.
- Open Access
- 15 November 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 94, 848-861
Addressing the challenge of ammonia slip and nitrous oxide emissions from zero-carbon fuelled engines through catalytic aftertreatment solutions
- 15 November 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 94, 848-861
Open AccessAddressing the challenge of ammonia slip and nitrous oxide emissions from zero-carbon fuelled engines through catalytic aftertreatment solutions
- Open Access
- 23 February 2023
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (11) , 12521-12532
Non-carbon greenhouse gas emissions for hybrid electric vehicles: three-way catalyst nitrous oxide and ammonia trade-off
Transport sector decarbonisation is leading to increased demand for electrified powertrains including hybrid vehicles. The presence of an internal combustion engine and electric motor offer multiple performance and efficiency advantages. However, changes in the conditions that catalytic aftertreatment systems are subjected to can present challenges in meeting forthcoming emissions standards. This work investigated the three-way catalyst performance to abate regulated and unregulated emissions from a gasoline direct injection engine working under conditions related to hybrid vehicle operation. The focus on unregulated emissions of NH3 and N2O is of interest due to limited literature on their formation in conventional, and particularly hybrid, vehicle aftertreatment systems. Furthermore, the likelihood of their regulation when the EURO 7 emissions standards are introduced increases the pertinence of this work. For this particular engine and aftertreatment setup, it was found that starting the engine whilst the three-way catalyst temperature was below 150 ℃ led to an increase in tailpipe regulated emissions and N2O. Whilst, starting the engine when three-way catalyst temperatures were above 350 ℃ lead to tailpipe NH3 emissions. This was due to the selectivity of NO to form N2O at lower temperatures and NH3 at higher temperatures. For the case of the studied catalyst, a vehicle energy management strategy opting to start the engine with the three-way catalyst within a targeted temperature range allowed for a trade-off between regulated emissions, N2O and NH3. These findings are significant since it can be used to optimise hybrid vehicle control strategies minimising both regulated and unregulated emissions.
- 23 February 2023
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (11) , 12521-12532
Open AccessNon-carbon greenhouse gas emissions for hybrid electric vehicles: three-way catalyst nitrous oxide and ammonia trade-off
Transport sector decarbonisation is leading to increased demand for electrified powertrains including hybrid vehicles. The presence of an internal combustion engine and electric motor offer multiple performance and efficiency advantages. However, changes in the conditions that catalytic aftertreatment systems are subjected to can present challenges in meeting forthcoming emissions standards. This work investigated the three-way catalyst performance to abate regulated and unregulated emissions from a gasoline direct injection engine working under conditions related to hybrid vehicle operation. The focus on unregulated emissions of NH3 and N2O is of interest due to limited literature on their formation in conventional, and particularly hybrid, vehicle aftertreatment systems. Furthermore, the likelihood of their regulation when the EURO 7 emissions standards are introduced increases the pertinence of this work. For this particular engine and aftertreatment setup, it was found that starting the engine whilst the three-way catalyst temperature was below 150 ℃ led to an increase in tailpipe regulated emissions and N2O. Whilst, starting the engine when three-way catalyst temperatures were above 350 ℃ lead to tailpipe NH3 emissions. This was due to the selectivity of NO to form N2O at lower temperatures and NH3 at higher temperatures. For the case of the studied catalyst, a vehicle energy management strategy opting to start the engine with the three-way catalyst within a targeted temperature range allowed for a trade-off between regulated emissions, N2O and NH3. These findings are significant since it can be used to optimise hybrid vehicle control strategies minimising both regulated and unregulated emissions.