Sadashiva Murthy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sadashiva Murthy has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
- Kajal Yadav
Department of Earth and Environmental Sciences Indian Institute of Science Education and Research Bhopal Bhopal India
4 shared publications - Ramya Sunder Raman
Department of Earth and Environmental Sciences, Indian Institute of Science Education and Research Bhopal, Bhopal, India
4 shared publications Abhijit Chatterjee
3 shared publicationsAbisheg Dhandapani
3 shared publicationsAkila Muthalagu
3 shared publications- Arshid Jehangir
University of Kashmir, Hazratbal
3 shared publications
Latest Publications
- Open Access
- 16 June 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 358
A worldwide aerosol phenomenology: Elemental and organic carbon in PM2.5 and PM10
- 16 June 2025
- Published by Elsevier in Atmospheric Environment
- Vol. 358
Open AccessA worldwide aerosol phenomenology: Elemental and organic carbon in PM2.5 and PM10
- Open Access
- 15 May 2025
- Published by Copernicus GmbH
Advancing PM2.5 Source Apportionment through Dispersion Normalized PMF: A Comprehensive Study across India
The recent IPCC report highlights PM2.5 as one of the most important contributors to air pollution and its health impacts. Determining the sources of air pollution, quantifying their contributions to ambient pollutant levels, and characterizing their spatial and temporal patterns are all important steps in developing effective mitigation strategies (Hopke, 2016). Source apportionment studies, especially those using receptor models, are critical for this purpose. Of these, Positive Matrix Factorization (PMF) is a widely applied methodology. The current work evolves standard PMF (S-PMF) by Tapper and Paatero, 1994 based on the implementation of dispersion-normalized PMF (DN-PMF) suggested by Dai et al., 2020 that includes meteorologically-influenced enhancement towards increasing local source emissions resolution. DN-PMF preserves source information otherwise obscured by variable atmospheric conditions, yielding refined and distinct source profiles. This research investigates the spatial and seasonal variability of PM2.5 sources across three Indian cities—Bhopal (MSL: 486 m), Mesra (MSL: 517 m), and Mysuru (MSL: 759 m)—as part of the COALESCE network in 2019. A Multiple Seasonal-Trend Decomposition using LOESS (MSTL) was applied to mixed layer height time series to decompose into their daily, weekly, and trend components. Stationarity tests were performed using the Augmented Dickey-Fuller with a p-value
- 15 May 2025
- Published by Copernicus GmbH
Open AccessAdvancing PM2.5 Source Apportionment through Dispersion Normalized PMF: A Comprehensive Study across India
The recent IPCC report highlights PM2.5 as one of the most important contributors to air pollution and its health impacts. Determining the sources of air pollution, quantifying their contributions to ambient pollutant levels, and characterizing their spatial and temporal patterns are all important steps in developing effective mitigation strategies (Hopke, 2016). Source apportionment studies, especially those using receptor models, are critical for this purpose. Of these, Positive Matrix Factorization (PMF) is a widely applied methodology. The current work evolves standard PMF (S-PMF) by Tapper and Paatero, 1994 based on the implementation of dispersion-normalized PMF (DN-PMF) suggested by Dai et al., 2020 that includes meteorologically-influenced enhancement towards increasing local source emissions resolution. DN-PMF preserves source information otherwise obscured by variable atmospheric conditions, yielding refined and distinct source profiles. This research investigates the spatial and seasonal variability of PM2.5 sources across three Indian cities—Bhopal (MSL: 486 m), Mesra (MSL: 517 m), and Mysuru (MSL: 759 m)—as part of the COALESCE network in 2019. A Multiple Seasonal-Trend Decomposition using LOESS (MSTL) was applied to mixed layer height time series to decompose into their daily, weekly, and trend components. Stationarity tests were performed using the Augmented Dickey-Fuller with a p-value
- Open Access
- 19 September 2024
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 51 (18)
Spatial Distribution in Surface Aerosol Light Absorption Across India
Light‐absorbing carbonaceous aerosols that dominate atmospheric aerosol warming over India remain poorly characterized. Here, we delve into UV‐visible‐IR spectral aerosol absorption properties at nine PAN‐India COALESCE network sites (Venkataraman et al., 2020, https://doi.org/10.1175/bams‐d‐19‐0030.1). Absorption properties were estimated from aerosol‐laden polytetrafluoroethylene filters using a well‐constrained technique incorporating filter‐to‐particle correction factors. The measurements revealed spatiotemporal heterogeneity in spectral intrinsic and extrinsic absorption properties. Absorption analysis at near‐UV wavelengths from carbonaceous aerosols at these regional sites revealed large near‐ultraviolet brown carbon absorption contributions from 21% to 68%—emphasizing the need to include these particles in climate models. Further, satellite‐retrieved column‐integrated absorption was dominated by surface absorption, which opens possibilities of using satellite measurements to model surface‐layer optical properties (limited to specific sites) at a higher spatial resolution. Both the satellite‐modeled and direct in‐situ absorption measurements can aid in validating and constraining climate modeling efforts that suffer from absorption underestimations and high uncertainties in radiative forcing estimates.
- 19 September 2024
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 51 (18)
Open AccessSpatial Distribution in Surface Aerosol Light Absorption Across India
Light‐absorbing carbonaceous aerosols that dominate atmospheric aerosol warming over India remain poorly characterized. Here, we delve into UV‐visible‐IR spectral aerosol absorption properties at nine PAN‐India COALESCE network sites (Venkataraman et al., 2020, https://doi.org/10.1175/bams‐d‐19‐0030.1). Absorption properties were estimated from aerosol‐laden polytetrafluoroethylene filters using a well‐constrained technique incorporating filter‐to‐particle correction factors. The measurements revealed spatiotemporal heterogeneity in spectral intrinsic and extrinsic absorption properties. Absorption analysis at near‐UV wavelengths from carbonaceous aerosols at these regional sites revealed large near‐ultraviolet brown carbon absorption contributions from 21% to 68%—emphasizing the need to include these particles in climate models. Further, satellite‐retrieved column‐integrated absorption was dominated by surface absorption, which opens possibilities of using satellite measurements to model surface‐layer optical properties (limited to specific sites) at a higher spatial resolution. Both the satellite‐modeled and direct in‐situ absorption measurements can aid in validating and constraining climate modeling efforts that suffer from absorption underestimations and high uncertainties in radiative forcing estimates.
- 20 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (14)
Drivers of PM2.5 Episodes and Exceedance in India: A Synthesis From the COALESCE Network
Emission sources influencing high particulate air pollution levels and related mortality in India have been studied earlier on country‐wide and sub‐national scales. Here, we use novel data sets of emissions (for 2019) and observations created under the Carbonaceous Aerosol Emissions, Source Apportionment, and Climate Impacts network in India (Venkataraman et al., 2020, https://doi.org/10.1175/bams‐d‐19‐0030.1) in WRF‐Chem simulations to evaluate drivers of high PM2.5 levels during episodes and in airsheds with different pollution levels. We identify airsheds in “extreme” (110–140 μg/m3), “severe” (80–110 μg/m3) and “significant” (40–80 μg/m3) exceedance of the Indian annual ambient air quality standard (National Ambient Air Quality Standards [NAAQS]) of 40 μg/m3 for PM2.5. We find that primary organic matter and anthropogenic mineral matter (largely coal fly‐ash) drive high PM2.5 levels, both annually and during high PM2.5 episodes. PM2.5 episodes are driven by organic aerosol in north India (Mohali) in wintertime but are additionally influenced by mineral matter and secondary inorganics in central (Bhopal), south India (Mysuru) and eastern India (Shyamnagar). Across airsheds in exceedance of the NAAQS and during high PM2.5 episodes, primary PM2.5 emissions arise largely from the residential sector (50%–75%). Formal sector emissions (industry, thermal power and transport; 40%–55%) drive airshed and episode scale PM2.5 exceedance in northern and eastern India. Agricultural residue burning emissions predominate (50%–75%) on episode scales, both in northern and central India, but not on annual scales. Interestingly, residential sector emissions strongly influence (60%–90%) airsheds in compliance with the NAAQS (annual mean PM2.5 < 40 μg/m3), implying the need for modern residential energy transitions for the reduction of ambient air pollution across India.
- 20 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (14)
Drivers of PM2.5 Episodes and Exceedance in India: A Synthesis From the COALESCE Network
Emission sources influencing high particulate air pollution levels and related mortality in India have been studied earlier on country‐wide and sub‐national scales. Here, we use novel data sets of emissions (for 2019) and observations created under the Carbonaceous Aerosol Emissions, Source Apportionment, and Climate Impacts network in India (Venkataraman et al., 2020, https://doi.org/10.1175/bams‐d‐19‐0030.1) in WRF‐Chem simulations to evaluate drivers of high PM2.5 levels during episodes and in airsheds with different pollution levels. We identify airsheds in “extreme” (110–140 μg/m3), “severe” (80–110 μg/m3) and “significant” (40–80 μg/m3) exceedance of the Indian annual ambient air quality standard (National Ambient Air Quality Standards [NAAQS]) of 40 μg/m3 for PM2.5. We find that primary organic matter and anthropogenic mineral matter (largely coal fly‐ash) drive high PM2.5 levels, both annually and during high PM2.5 episodes. PM2.5 episodes are driven by organic aerosol in north India (Mohali) in wintertime but are additionally influenced by mineral matter and secondary inorganics in central (Bhopal), south India (Mysuru) and eastern India (Shyamnagar). Across airsheds in exceedance of the NAAQS and during high PM2.5 episodes, primary PM2.5 emissions arise largely from the residential sector (50%–75%). Formal sector emissions (industry, thermal power and transport; 40%–55%) drive airshed and episode scale PM2.5 exceedance in northern and eastern India. Agricultural residue burning emissions predominate (50%–75%) on episode scales, both in northern and central India, but not on annual scales. Interestingly, residential sector emissions strongly influence (60%–90%) airsheds in compliance with the NAAQS (annual mean PM2.5 < 40 μg/m3), implying the need for modern residential energy transitions for the reduction of ambient air pollution across India.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Study of aerosol trace elements over three COALESCE network locations in India: Spatio-temporal variability, dry deposition and health risks
A small fraction (5-10 %) of PM2.5 (fine particulate matter, with aerodynamic diameter ≤ 2.5 µm) mass constitutes trace elements (TEs) and plays an important role in controlling human health, ecological systems and air quality. TE/groups of TE are used as tracers to identify specific PM sources, predominantly due to their persistence and stability in the atmosphere. As a part of the COALESCE network ambient aerosol measurement campaign, 24-h integrated collocated PM2.5 filter sampling was carried out for 2019 in all the three distinctly different geographical locations in India, viz., Bhopal, Mesra and Mysuru, and 15 TE concentrations were analyzed using Energy Dispersive X-Ray Fluorescence. For all sites, annual mean sulfur contributed highest (~7 %) to PM2.5 mass among all analyzed elements followed by silicon (~3 %). Elements from multiple sources exhibited differentiable seasonal variations like crustal origin elements peaked during the pre-monsoon season, while other anthropogenic activities driven elements increased during the winter and post- monsoon seasons. Spatial heterogeneity of elements between the sites was examined using statistical tools like coefficient of divergence and spearman correlation coefficient (SCC), and revealed that they had different sources/source regions or were processed differently in the atmosphere. Further, SCC coupled with hierarchical clustering analysis categorized the data set into three common groups to yield likely sources of TEs that included crustal and mineral dust; biomass burning; non-exhaust traffic emissions and industrial sources, for all three locations. The computed dry deposition flux of both crustal (3377.41 ± 3224.65 µg m-2 d-1 to 27.83 ± 21.91 µg m-2 d-1) and non-crustal elements (53.47 ± 78.57 µg m-2 d-1 to 0.72 ± 0.59 µg m-2 d-1) was in compliance with modeled deposition flux for the entire Northern Indian Ocean and were similar to the fluxes over different regions across the globe. The United States Environment Protection Agency health risk assessment method in all sites revealed that the route of exposure of metals was highest via inhalation pathway for both adults and children, followed by dermal contact and ingestion. Total potential non-carcinogenic health risk for all pathways were below safe level (Hazard Quotient < 1) for Bhopal and Mysuru, and above safe level (Hazard Quotient > 1) for Mesra. These findings suggest that the non-carcinogenic adverse effects from multi-elemental exposure to PM2.5 was greater in Mesra, than other two sites and might be due to influence of elemental pollutants from more dominant sources of agricultural burning and industrial activities in this region (1). On the other hand, the carcinogenic risk of all metal exposure was within acceptable limits (1×10-6 – 1×10-4), through all three pathways in all the sites. Overall, the multiple site analysis presented in this study provides information on spatiotemporal patterns, dry deposition fluxes of elements in ambient PM, in addition to potential human health risks upon exposure to these species. 1.Maheshwarkar, Prem, et al. "Understanding the influence of meteorology and emission sources on PM2. 5 mass concentrations across India: first results from the COALESCE network." Journal of Geophysical Research: Atmospheres 127.4 (2022): e2021JD035663.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessStudy of aerosol trace elements over three COALESCE network locations in India: Spatio-temporal variability, dry deposition and health risks
A small fraction (5-10 %) of PM2.5 (fine particulate matter, with aerodynamic diameter ≤ 2.5 µm) mass constitutes trace elements (TEs) and plays an important role in controlling human health, ecological systems and air quality. TE/groups of TE are used as tracers to identify specific PM sources, predominantly due to their persistence and stability in the atmosphere. As a part of the COALESCE network ambient aerosol measurement campaign, 24-h integrated collocated PM2.5 filter sampling was carried out for 2019 in all the three distinctly different geographical locations in India, viz., Bhopal, Mesra and Mysuru, and 15 TE concentrations were analyzed using Energy Dispersive X-Ray Fluorescence. For all sites, annual mean sulfur contributed highest (~7 %) to PM2.5 mass among all analyzed elements followed by silicon (~3 %). Elements from multiple sources exhibited differentiable seasonal variations like crustal origin elements peaked during the pre-monsoon season, while other anthropogenic activities driven elements increased during the winter and post- monsoon seasons. Spatial heterogeneity of elements between the sites was examined using statistical tools like coefficient of divergence and spearman correlation coefficient (SCC), and revealed that they had different sources/source regions or were processed differently in the atmosphere. Further, SCC coupled with hierarchical clustering analysis categorized the data set into three common groups to yield likely sources of TEs that included crustal and mineral dust; biomass burning; non-exhaust traffic emissions and industrial sources, for all three locations. The computed dry deposition flux of both crustal (3377.41 ± 3224.65 µg m-2 d-1 to 27.83 ± 21.91 µg m-2 d-1) and non-crustal elements (53.47 ± 78.57 µg m-2 d-1 to 0.72 ± 0.59 µg m-2 d-1) was in compliance with modeled deposition flux for the entire Northern Indian Ocean and were similar to the fluxes over different regions across the globe. The United States Environment Protection Agency health risk assessment method in all sites revealed that the route of exposure of metals was highest via inhalation pathway for both adults and children, followed by dermal contact and ingestion. Total potential non-carcinogenic health risk for all pathways were below safe level (Hazard Quotient < 1) for Bhopal and Mysuru, and above safe level (Hazard Quotient > 1) for Mesra. These findings suggest that the non-carcinogenic adverse effects from multi-elemental exposure to PM2.5 was greater in Mesra, than other two sites and might be due to influence of elemental pollutants from more dominant sources of agricultural burning and industrial activities in this region (1). On the other hand, the carcinogenic risk of all metal exposure was within acceptable limits (1×10-6 – 1×10-4), through all three pathways in all the sites. Overall, the multiple site analysis presented in this study provides information on spatiotemporal patterns, dry deposition fluxes of elements in ambient PM, in addition to potential human health risks upon exposure to these species. 1.Maheshwarkar, Prem, et al. "Understanding the influence of meteorology and emission sources on PM2. 5 mass concentrations across India: first results from the COALESCE network." Journal of Geophysical Research: Atmospheres 127.4 (2022): e2021JD035663.
- 24 February 2023
- Published by Elsevier in Chemosphere
- Vol. 324, 138203
Pollution characteristics and ecological risks of trace elements in PM2.5 over three COALESCE network sites - Bhopal, Mesra, and Mysuru, India
- 24 February 2023
- Published by Elsevier in Chemosphere
- Vol. 324, 138203
Pollution characteristics and ecological risks of trace elements in PM2.5 over three COALESCE network sites - Bhopal, Mesra, and Mysuru, India
- 19 May 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Development of Analytical Mass Transport Model for the Pollutant Migration in the Subsurface Environment
To facilitate the predictions of movement and behavior of chemicals, a one-dimensional analytical model has been developed to predict the solute transport through the unsaturated soil zone. The characteristics feature of this model is that it takes into account the influence of various processes like adsorption, leaching, volatilization, degradation, and plant uptake simultaneously. This could be achieved by introducing a common rate constant term called as total elimination rate, which is the summation of rate constants derived from the degradation, leaching, volatilization and plant uptake processes. It is this feature of the model that sets it apart and excels from that of conventional model or process specific models or site-specific models, which tends to be expensive, time consuming, and data exhaustive. The application of the developed model has been illustrated by considering the agricultural sub soil environment. The breakthrough curves for concentration versus time and depth were generated for nitrates and phosphates and used to determine the input parameters for the developed analytical transport model.
- 19 May 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Development of Analytical Mass Transport Model for the Pollutant Migration in the Subsurface Environment
To facilitate the predictions of movement and behavior of chemicals, a one-dimensional analytical model has been developed to predict the solute transport through the unsaturated soil zone. The characteristics feature of this model is that it takes into account the influence of various processes like adsorption, leaching, volatilization, degradation, and plant uptake simultaneously. This could be achieved by introducing a common rate constant term called as total elimination rate, which is the summation of rate constants derived from the degradation, leaching, volatilization and plant uptake processes. It is this feature of the model that sets it apart and excels from that of conventional model or process specific models or site-specific models, which tends to be expensive, time consuming, and data exhaustive. The application of the developed model has been illustrated by considering the agricultural sub soil environment. The breakthrough curves for concentration versus time and depth were generated for nitrates and phosphates and used to determine the input parameters for the developed analytical transport model.