Sophie Rosenburg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sophie Rosenburg has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Manfred Wendisch
Leipzig Institute for Meteorology, Leipzig University, Leipzig, Germany
19 shared publications - André Ehrlich
Leipziger Institut für Meteorologie (LIM), Universität Leipzig, Leipzig, Germany
18 shared publications - Michael Schäfer
Leipziger Institut für Meteorologie (LIM), Universität Leipzig, Leipzig, Germany
17 shared publications - Anna Elizabeth Luebke
Leipziger Institut für Meteorologie (LIM), Universität Leipzig, Leipzig, Germany
11 shared publications - Marcus Klingebiel
Leipziger Institut für Meteorologie (LIM), Universität Leipzig, Leipzig, Germany
11 shared publications Evelyn Jäkel
Leipziger Institut für Meteorologie (LIM), Universität Leipzig, Leipzig, Germany
10 shared publications
Latest Publications
- Open Access
- 9 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-25
Comment on egusphere-2026-5857
Arctic marine cold air outbreaks (MCAOs) are important meridional air mass transformation events accompanied by spatially extensive cloud formation. Here, the top-of-atmosphere radiative effect of these MCAO clouds is analyzed using airborne thermal-infrared imaging observations conducted during the HALO-(AC)3 research campaign. Based on the capabilities of the high-resolution (∼ 10 m) imaging, a fine-scale cloud mask is derived. Furthermore, two cloud radiative effects (CREs), an all-sky CRE (including both cloudy and cloud-free areas) and a cloud-only CRE, are quantified. This way, the effects of cloud fraction and cloud properties are separated, and the drivers of the all-sky CRE are evaluated. It is found that the increase of the all-sky CRE downstream in an MCAO is primarily driven by cloud fraction, in particular for a strong MCAO event. In a next step, the approach applicability and its sensitivity to coarser spatial sampling is evaluated by scaling the airborne images down to lower resolutions of satellite observations provided by EarthCARE MSI (500 m) and Terra/Aqua MODIS (1000 m). This coarsening results in an underestimation of the CREs, with maximum values found in the strong MCAO case and at MODIS resolution with −1.9 W m−2 (all-sky CRE) and −2.9 W m−2 (cloud-only CRE). The relations between CREs and cloud fraction can still be identified for lower spatial resolutions but lack in robustness. This highlights the importance of high-resolution airborne thermal-infrared imaging in support of large-scale spaceborne cloud observations to determine CREs.
- 9 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-25
Open AccessComment on egusphere-2026-5857
Arctic marine cold air outbreaks (MCAOs) are important meridional air mass transformation events accompanied by spatially extensive cloud formation. Here, the top-of-atmosphere radiative effect of these MCAO clouds is analyzed using airborne thermal-infrared imaging observations conducted during the HALO-(AC)3 research campaign. Based on the capabilities of the high-resolution (∼ 10 m) imaging, a fine-scale cloud mask is derived. Furthermore, two cloud radiative effects (CREs), an all-sky CRE (including both cloudy and cloud-free areas) and a cloud-only CRE, are quantified. This way, the effects of cloud fraction and cloud properties are separated, and the drivers of the all-sky CRE are evaluated. It is found that the increase of the all-sky CRE downstream in an MCAO is primarily driven by cloud fraction, in particular for a strong MCAO event. In a next step, the approach applicability and its sensitivity to coarser spatial sampling is evaluated by scaling the airborne images down to lower resolutions of satellite observations provided by EarthCARE MSI (500 m) and Terra/Aqua MODIS (1000 m). This coarsening results in an underestimation of the CREs, with maximum values found in the strong MCAO case and at MODIS resolution with −1.9 W m−2 (all-sky CRE) and −2.9 W m−2 (cloud-only CRE). The relations between CREs and cloud fraction can still be identified for lower spatial resolutions but lack in robustness. This highlights the importance of high-resolution airborne thermal-infrared imaging in support of large-scale spaceborne cloud observations to determine CREs.
- Open Access
- 9 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-25
Comment on egusphere-2026-5857
Arctic marine cold air outbreaks (MCAOs) are important meridional air mass transformation events accompanied by spatially extensive cloud formation. Here, the top-of-atmosphere radiative effect of these MCAO clouds is analyzed using airborne thermal-infrared imaging observations conducted during the HALO-(AC)3 research campaign. Based on the capabilities of the high-resolution (∼ 10 m) imaging, a fine-scale cloud mask is derived. Furthermore, two cloud radiative effects (CREs), an all-sky CRE (including both cloudy and cloud-free areas) and a cloud-only CRE, are quantified. This way, the effects of cloud fraction and cloud properties are separated, and the drivers of the all-sky CRE are evaluated. It is found that the increase of the all-sky CRE downstream in an MCAO is primarily driven by cloud fraction, in particular for a strong MCAO event. In a next step, the approach applicability and its sensitivity to coarser spatial sampling is evaluated by scaling the airborne images down to lower resolutions of satellite observations provided by EarthCARE MSI (500 m) and Terra/Aqua MODIS (1000 m). This coarsening results in an underestimation of the CREs, with maximum values found in the strong MCAO case and at MODIS resolution with −1.9 W m−2 (all-sky CRE) and −2.9 W m−2 (cloud-only CRE). The relations between CREs and cloud fraction can still be identified for lower spatial resolutions but lack in robustness. This highlights the importance of high-resolution airborne thermal-infrared imaging in support of large-scale spaceborne cloud observations to determine CREs.
- 9 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-25
Open AccessComment on egusphere-2026-5857
Arctic marine cold air outbreaks (MCAOs) are important meridional air mass transformation events accompanied by spatially extensive cloud formation. Here, the top-of-atmosphere radiative effect of these MCAO clouds is analyzed using airborne thermal-infrared imaging observations conducted during the HALO-(AC)3 research campaign. Based on the capabilities of the high-resolution (∼ 10 m) imaging, a fine-scale cloud mask is derived. Furthermore, two cloud radiative effects (CREs), an all-sky CRE (including both cloudy and cloud-free areas) and a cloud-only CRE, are quantified. This way, the effects of cloud fraction and cloud properties are separated, and the drivers of the all-sky CRE are evaluated. It is found that the increase of the all-sky CRE downstream in an MCAO is primarily driven by cloud fraction, in particular for a strong MCAO event. In a next step, the approach applicability and its sensitivity to coarser spatial sampling is evaluated by scaling the airborne images down to lower resolutions of satellite observations provided by EarthCARE MSI (500 m) and Terra/Aqua MODIS (1000 m). This coarsening results in an underestimation of the CREs, with maximum values found in the strong MCAO case and at MODIS resolution with −1.9 W m−2 (all-sky CRE) and −2.9 W m−2 (cloud-only CRE). The relations between CREs and cloud fraction can still be identified for lower spatial resolutions but lack in robustness. This highlights the importance of high-resolution airborne thermal-infrared imaging in support of large-scale spaceborne cloud observations to determine CREs.
- Open Access
- 9 November 2026
- Published by Copernicus GmbH
Supplementary material to "Cloud fraction driven thermal-infrared radiative effects of Arctic low-level clouds in marine cold air outbreaks"
- 9 November 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Cloud fraction driven thermal-infrared radiative effects of Arctic low-level clouds in marine cold air outbreaks"
- Open Access
- 9 November 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-25
Cloud fraction driven thermal-infrared radiative effects of Arctic low-level clouds in marine cold air outbreaks
Arctic marine cold air outbreaks (MCAOs) are important meridional air mass transformation events accompanied by spatially extensive cloud formation. Here, the top-of-atmosphere radiative effect of these MCAO clouds is analyzed using airborne thermal-infrared imaging observations conducted during the HALO-(AC)3 research campaign. Based on the capabilities of the high-resolution (∼ 10 m) imaging, a fine-scale cloud mask is derived. Furthermore, two cloud radiative effects (CREs), an all-sky CRE (including both cloudy and cloud-free areas) and a cloud-only CRE, are quantified. This way, the effects of cloud fraction and cloud properties are separated, and the drivers of the all-sky CRE are evaluated. It is found that the increase of the all-sky CRE downstream in an MCAO is primarily driven by cloud fraction, in particular for a strong MCAO event. In a next step, the approach applicability and its sensitivity to coarser spatial sampling is evaluated by scaling the airborne images down to lower resolutions of satellite observations provided by EarthCARE MSI (500 m) and Terra/Aqua MODIS (1000 m). This coarsening results in an underestimation of the CREs, with maximum values found in the strong MCAO case and at MODIS resolution with −1.9 W m−2 (all-sky CRE) and −2.9 W m−2 (cloud-only CRE). The relations between CREs and cloud fraction can still be identified for lower spatial resolutions but lack in robustness. This highlights the importance of high-resolution airborne thermal-infrared imaging in support of large-scale spaceborne cloud observations to determine CREs.
- 9 November 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-25
Open AccessCloud fraction driven thermal-infrared radiative effects of Arctic low-level clouds in marine cold air outbreaks
Arctic marine cold air outbreaks (MCAOs) are important meridional air mass transformation events accompanied by spatially extensive cloud formation. Here, the top-of-atmosphere radiative effect of these MCAO clouds is analyzed using airborne thermal-infrared imaging observations conducted during the HALO-(AC)3 research campaign. Based on the capabilities of the high-resolution (∼ 10 m) imaging, a fine-scale cloud mask is derived. Furthermore, two cloud radiative effects (CREs), an all-sky CRE (including both cloudy and cloud-free areas) and a cloud-only CRE, are quantified. This way, the effects of cloud fraction and cloud properties are separated, and the drivers of the all-sky CRE are evaluated. It is found that the increase of the all-sky CRE downstream in an MCAO is primarily driven by cloud fraction, in particular for a strong MCAO event. In a next step, the approach applicability and its sensitivity to coarser spatial sampling is evaluated by scaling the airborne images down to lower resolutions of satellite observations provided by EarthCARE MSI (500 m) and Terra/Aqua MODIS (1000 m). This coarsening results in an underestimation of the CREs, with maximum values found in the strong MCAO case and at MODIS resolution with −1.9 W m−2 (all-sky CRE) and −2.9 W m−2 (cloud-only CRE). The relations between CREs and cloud fraction can still be identified for lower spatial resolutions but lack in robustness. This highlights the importance of high-resolution airborne thermal-infrared imaging in support of large-scale spaceborne cloud observations to determine CREs.
- Open Access
- 16 June 2026
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 19 (11) , 3933-3959
Persistent EarthCARE underflight studies of the ITCZ and organized convection (PERCUSION): contribution to EarthCARE validation
In May 2024, the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite payload combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic and mid- to high-latitudes to validate the EarthCARE measurements and data products early in its commissioning phase. Here we aim to give a detailed overview of the PERCUSION (Persistent Earth CARE underflight studies of the ITCZ and organized convection) mission, and to advertise the use of its data in future more detailed validation studies. We give examples of how to use PERCUSION data to approach the validation of all four instruments of EarthCARE as well as of higher level (i.e. multi-sensor) products, and give first confidence in the quality of EarthCARE data.
- 16 June 2026
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 19 (11) , 3933-3959
Open AccessPersistent EarthCARE underflight studies of the ITCZ and organized convection (PERCUSION): contribution to EarthCARE validation
In May 2024, the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite payload combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic and mid- to high-latitudes to validate the EarthCARE measurements and data products early in its commissioning phase. Here we aim to give a detailed overview of the PERCUSION (Persistent Earth CARE underflight studies of the ITCZ and organized convection) mission, and to advertise the use of its data in future more detailed validation studies. We give examples of how to use PERCUSION data to approach the validation of all four instruments of EarthCARE as well as of higher level (i.e. multi-sensor) products, and give first confidence in the quality of EarthCARE data.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Quantifying drivers of the thermal-infrared radiative effect of Arctic low-level clouds in cold air outbreaks
Marine cold air outbreaks (CAOs) represent an important meridional transport mechanism out of the Arctic towards lower latitudes. The cloud field properties change with the air mass transformation, and the thermal-infrared all-sky cloud radiative effect (CRE) is increasing in the downstream direction during the initial stages of a CAO. These evolution processes are important to understand current and future CAOs in a warming Arctic, which will favor weaker events.Here, we aim to identify the driving factors of this downstream increase for different CAO events of varying intensity, which were observed during the HALO-(AC)3 campaign in spring 2022. The High Altitude and LOng range research aircraft (HALO) sampled CAOs in a quasi-Lagrangian way with a remote sensing payload. The thermal-infrared imager VELOX (Video airbornE Longwave Observations within siX channels) provided 2D broadband (7.7 µm to 12.0 µm) brightness temperature fields of cloud tops and the surface with a spatial resolution of 10 m for a 10 km target distance. First, a cloud mask is applied to those brightness temperature fields to determine cloud fractions. In a next step, two types of CRE are calculated. A cloud-only CRE is derived for all identified cloud pixels while an all-sky CRE is calculated for cloud-free as well as cloud pixels. The comparison of the cloud-only and all-sky VELOX CREs enables a determination of the all-sky CRE driver, i.e., cloud top temperature or cloud fraction. In addition, lidar cloud top heights and a large-scale all-sky CRE, based on measurements by a broadband radiometer and radiative transfer simulations, are analyzed to provide further context for the analyzed cases. The results imply that the strength of the all-sky CRE increase depends on the CAO intensity and is in general driven by increasing cloud fraction. Thus, this analysis provides a TOA-like perspective on the thermal-infrared radiative impact of a low-level cloud field, which is (trans-)forming during the initial stages of a CAO.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessQuantifying drivers of the thermal-infrared radiative effect of Arctic low-level clouds in cold air outbreaks
Marine cold air outbreaks (CAOs) represent an important meridional transport mechanism out of the Arctic towards lower latitudes. The cloud field properties change with the air mass transformation, and the thermal-infrared all-sky cloud radiative effect (CRE) is increasing in the downstream direction during the initial stages of a CAO. These evolution processes are important to understand current and future CAOs in a warming Arctic, which will favor weaker events.Here, we aim to identify the driving factors of this downstream increase for different CAO events of varying intensity, which were observed during the HALO-(AC)3 campaign in spring 2022. The High Altitude and LOng range research aircraft (HALO) sampled CAOs in a quasi-Lagrangian way with a remote sensing payload. The thermal-infrared imager VELOX (Video airbornE Longwave Observations within siX channels) provided 2D broadband (7.7 µm to 12.0 µm) brightness temperature fields of cloud tops and the surface with a spatial resolution of 10 m for a 10 km target distance. First, a cloud mask is applied to those brightness temperature fields to determine cloud fractions. In a next step, two types of CRE are calculated. A cloud-only CRE is derived for all identified cloud pixels while an all-sky CRE is calculated for cloud-free as well as cloud pixels. The comparison of the cloud-only and all-sky VELOX CREs enables a determination of the all-sky CRE driver, i.e., cloud top temperature or cloud fraction. In addition, lidar cloud top heights and a large-scale all-sky CRE, based on measurements by a broadband radiometer and radiative transfer simulations, are analyzed to provide further context for the analyzed cases. The results imply that the strength of the all-sky CRE increase depends on the CAO intensity and is in general driven by increasing cloud fraction. Thus, this analysis provides a TOA-like perspective on the thermal-infrared radiative impact of a low-level cloud field, which is (trans-)forming during the initial stages of a CAO.
- Open Access
- 16 January 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-41
Persistent EarthCARE underflight studies of the ITCZ and organized convection (PERCUSION): Contribution to EarthCARE Validation
In May 2024, the Earth Clouds, Aerosols and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date to for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic, sup-tropic and mid- to high-latitudes targeting to validate the EarthCARE measurements and data products early in its commissioning phase. With 33 passes under the EarthCARE satellite during 30 research flights we were able to address target scenes that have been identified by the EarthCARE algorithm developers to be of importance for the validation of the mission, and to assure the retrieval performance under different meteorological conditions and aerosol-cloud situations.
- 16 January 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-41
Open AccessPersistent EarthCARE underflight studies of the ITCZ and organized convection (PERCUSION): Contribution to EarthCARE Validation
In May 2024, the Earth Clouds, Aerosols and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date to for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic, sup-tropic and mid- to high-latitudes targeting to validate the EarthCARE measurements and data products early in its commissioning phase. With 33 passes under the EarthCARE satellite during 30 research flights we were able to address target scenes that have been identified by the EarthCARE algorithm developers to be of importance for the validation of the mission, and to assure the retrieval performance under different meteorological conditions and aerosol-cloud situations.
- Open Access
- 24 September 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (18) , 4695-4708
High-resolution maps of Arctic surface skin temperature and type retrieved from airborne thermal infrared imagery collected during the HALO–(𝒜 𝒞)3 campaign
Two retrieval methods for the determination of Arctic surface skin temperature and surface type based on radiance measurements from the thermal infrared (TIR) imager VELOX (Video airbornE Longwave Observations within siX channels) were developed. VELOX captured TIR radiances in terms of brightness temperatures for wavelengths from 7.7 to 12 µm in six spectral channels. The imager was deployed on the High Altitude and LOng Range research aircraft (HALO) during the HALO–(𝒜𝒞)3 aircraft field campaign conducted in the framework of the Arctic Amplification: Climate Relevant Atmospheric and SurfaCe Processes and Feedback Mechanisms (𝒜𝒞)3 research programme. The measurements were taken over the Fram Strait and the central Arctic in March and April 2022. Radiative transfer simulations assuming cloud-free atmospheric conditions were performed showing that the influence of water vapour on the measured brightness temperature can be neglected. Therefore it was possible to apply a single-channel retrieval technique to obtain the surface skin temperature from the VELOX data. The retrieval results were compared with data from the MODerate-resolution Imaging Spectroradiometer (MODIS) showing an agreement within 2.0 K. Secondly, a pixel-by-pixel surface classification retrieval was developed using a random forest algorithm. It classifies surfaces into types of open water, sea-ice–water mixture, thin sea ice, and snow-covered sea ice. The resulting sea-ice concentrations were compared with satellite data, yielding a mean absolute difference (MAD) of 5 %. In addition, the classified pixels were aggregated into segments of the same surface type, providing different segment size distributions for all surface types. When grouped by the distance to the sea-ice edge, the segment size distribution showed a shift to fewer but larger floes in the direction of the pack ice.
- 24 September 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (18) , 4695-4708
Open AccessHigh-resolution maps of Arctic surface skin temperature and type retrieved from airborne thermal infrared imagery collected during the HALO–(𝒜 𝒞)3 campaign
Two retrieval methods for the determination of Arctic surface skin temperature and surface type based on radiance measurements from the thermal infrared (TIR) imager VELOX (Video airbornE Longwave Observations within siX channels) were developed. VELOX captured TIR radiances in terms of brightness temperatures for wavelengths from 7.7 to 12 µm in six spectral channels. The imager was deployed on the High Altitude and LOng Range research aircraft (HALO) during the HALO–(𝒜𝒞)3 aircraft field campaign conducted in the framework of the Arctic Amplification: Climate Relevant Atmospheric and SurfaCe Processes and Feedback Mechanisms (𝒜𝒞)3 research programme. The measurements were taken over the Fram Strait and the central Arctic in March and April 2022. Radiative transfer simulations assuming cloud-free atmospheric conditions were performed showing that the influence of water vapour on the measured brightness temperature can be neglected. Therefore it was possible to apply a single-channel retrieval technique to obtain the surface skin temperature from the VELOX data. The retrieval results were compared with data from the MODerate-resolution Imaging Spectroradiometer (MODIS) showing an agreement within 2.0 K. Secondly, a pixel-by-pixel surface classification retrieval was developed using a random forest algorithm. It classifies surfaces into types of open water, sea-ice–water mixture, thin sea ice, and snow-covered sea ice. The resulting sea-ice concentrations were compared with satellite data, yielding a mean absolute difference (MAD) of 5 %. In addition, the classified pixels were aggregated into segments of the same surface type, providing different segment size distributions for all surface types. When grouped by the distance to the sea-ice edge, the segment size distribution showed a shift to fewer but larger floes in the direction of the pack ice.
- Open Access
- 4 September 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (17) , 9787-9801
Airborne observations of cloud properties during their evolution from organized streets to isotropic cloud structures along an Arctic cold-air outbreak
This case study explores the evolution of clouds during an Arctic cold-air outbreak in the Fram Strait region observed during the HALO–(𝒜𝒞)3 aircraft campaign. Our research provides information about the formation, structure, microphysical and macrophysical properties, and radiative effects and investigates the role of vertical wind shear and buoyancy forces in the transition from regular cloud streets to rather isotropic cloud patterns. Our findings show that lower horizontal boundary layer wind speeds (−1) disrupt the formation of cloud streets, leading to more isotropic cloud patterns, characterized by increasing cloud fraction (from 0.73 to 0.84) and cloud top height (from 330 to 390 m), and quantify the increase in liquid water path as well. In addition, we observe an increase in the number concentration of ice crystals in a size range between 100–1000 µm and notable riming processes within organized cloud streets. Concurrent radiation measurements in our case study reveal that isotropic cloud patterns can exhibit either low or high albedo as well as low or high Fnet,TIR, suggesting that these patterns represent different developing stages.
- 4 September 2025
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 25 (17) , 9787-9801
Open AccessAirborne observations of cloud properties during their evolution from organized streets to isotropic cloud structures along an Arctic cold-air outbreak
This case study explores the evolution of clouds during an Arctic cold-air outbreak in the Fram Strait region observed during the HALO–(𝒜𝒞)3 aircraft campaign. Our research provides information about the formation, structure, microphysical and macrophysical properties, and radiative effects and investigates the role of vertical wind shear and buoyancy forces in the transition from regular cloud streets to rather isotropic cloud patterns. Our findings show that lower horizontal boundary layer wind speeds (−1) disrupt the formation of cloud streets, leading to more isotropic cloud patterns, characterized by increasing cloud fraction (from 0.73 to 0.84) and cloud top height (from 330 to 390 m), and quantify the increase in liquid water path as well. In addition, we observe an increase in the number concentration of ice crystals in a size range between 100–1000 µm and notable riming processes within organized cloud streets. Concurrent radiation measurements in our case study reveal that isotropic cloud patterns can exhibit either low or high albedo as well as low or high Fnet,TIR, suggesting that these patterns represent different developing stages.
- Top Cited PapersOpen Access
- 1 April 2025
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 17 (3) , 1295-1328
A comprehensive in situ and remote sensing data set collected during the HALO–(𝒜 𝒞) 3 aircraft campaign
The HALO–(𝒜𝒞) 3 aircraft campaign was carried out in March and April 2022 over the Norwegian and Greenland seas, the Fram Strait, and the central Arctic Ocean. Three research aircraft – the High Altitude and Long Range Research Aircraft ( HALO ), Polar 5 , and Polar 6 – performed 54 partly coordinated research flights on 23 flight days over areas of open ocean, the marginal sea ice zone (MIZ), and the central Arctic sea ice. The general objective of the research flights was to quantify the evolution of air mass properties during moist and warm-air intrusions (WAIs) and cold-air outbreaks (CAOs). To obtain a comprehensive data set, the three aircraft operated following different strategies. HALO was equipped with active and passive remote sensing instruments and dropsondes to cover the regional evolution of cloud and thermodynamic processes. Polar 5 carried a similar remote sensing payload to HALO , and Polar 6 was instrumented with in situ cloud, aerosol, and trace gas instruments focusing on the initial air mass transformation close to the MIZ. The processed, calibrated, and validated data are published in the World Data Center PANGAEA as instrument-separated data subsets and listed in aircraft-separated collections for HALO (Ehrlich et al., 2024a, https://doi.org/10.1594/PANGAEA.968885), Polar 5 (Mech et al., 2024a, https://doi.org/10.1594/PANGAEA.968883), and Polar 6 (Herber et al., 2024, https://doi.org/10.1594/PANGAEA.968884). A detailed overview of the available data sets is provided here. Furthermore, the campaign-specific instrument setup, the data processing, and quality are summarized. Based on measurements conducted during a specific CAO, it is shown that the scientific analysis of the HALO–(𝒜𝒞) 3 data benefits from the coordinated operation of the three aircraft.
- 1 April 2025
- Published by Copernicus GmbH in Earth System Science Data
- Vol. 17 (3) , 1295-1328
Top Cited PapersOpen AccessA comprehensive in situ and remote sensing data set collected during the HALO–(𝒜 𝒞) 3 aircraft campaign
The HALO–(𝒜𝒞) 3 aircraft campaign was carried out in March and April 2022 over the Norwegian and Greenland seas, the Fram Strait, and the central Arctic Ocean. Three research aircraft – the High Altitude and Long Range Research Aircraft ( HALO ), Polar 5 , and Polar 6 – performed 54 partly coordinated research flights on 23 flight days over areas of open ocean, the marginal sea ice zone (MIZ), and the central Arctic sea ice. The general objective of the research flights was to quantify the evolution of air mass properties during moist and warm-air intrusions (WAIs) and cold-air outbreaks (CAOs). To obtain a comprehensive data set, the three aircraft operated following different strategies. HALO was equipped with active and passive remote sensing instruments and dropsondes to cover the regional evolution of cloud and thermodynamic processes. Polar 5 carried a similar remote sensing payload to HALO , and Polar 6 was instrumented with in situ cloud, aerosol, and trace gas instruments focusing on the initial air mass transformation close to the MIZ. The processed, calibrated, and validated data are published in the World Data Center PANGAEA as instrument-separated data subsets and listed in aircraft-separated collections for HALO (Ehrlich et al., 2024a, https://doi.org/10.1594/PANGAEA.968885), Polar 5 (Mech et al., 2024a, https://doi.org/10.1594/PANGAEA.968883), and Polar 6 (Herber et al., 2024, https://doi.org/10.1594/PANGAEA.968884). A detailed overview of the available data sets is provided here. Furthermore, the campaign-specific instrument setup, the data processing, and quality are summarized. Based on measurements conducted during a specific CAO, it is shown that the scientific analysis of the HALO–(𝒜𝒞) 3 data benefits from the coordinated operation of the three aircraft.