Inmaculada Ferri-Moreno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Inmaculada Ferri-Moreno has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Mari Luz García-Lorenzo
Departamento de Mineralogía y Petrología, Facultad de Ciencias Geológicas, Universidad Complutense de Madrid, 28040 Madrid, Spain
6 shared publications - Pablo Higueras
Instituto de Geología Aplicada, Universidad de Castilla-La Mancha, 13400 Ciudad Real, Spain
4 shared publications - Iker Martínez-Del-Pozo
Departamento de Mineralogía y Petrología, Facultad de Ciencias Geológicas, Universidad Complutense de Madrid, 28040, Madrid, Spain
3 shared publications José María Esbrí
3 shared publications- José Ignacio Barquero
Institute of Applied Geology, University of Castilla-La Mancha, Pl. Manuel Meca 1, 13400 Almadén, Ciudad Real, Spain
2 shared publications - José María Esbrí
Departamento de Mineralogía y Petrología, Facultad de Ciencias Geológicas, Universidad Complutense de Madrid, 28040 Madrid, Spain
2 shared publications
Latest Publications
- Open Access
- 4 February 2026
- Published by Elsevier in Environmental Research
- Vol. 295, 123954
Ecotoxicity assessment of primary producers in metal mining areas: biological indicators for ecosystem restoration
- 4 February 2026
- Published by Elsevier in Environmental Research
- Vol. 295, 123954
Open AccessEcotoxicity assessment of primary producers in metal mining areas: biological indicators for ecosystem restoration
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Application of pXRF technique to the determination of major and trace elements in large soil datasets, advantages and limitations
Soil plays a fundamental role for both ecosystems and humans, and its characterization is an essential tool for strategic planning in areas such as agriculture, natural resource exploration and detection of potential soil contamination. To achive an effective geochemical characterization, it is necessary to study the background geochemical levels, considering the local geology of the environment and anomalous levels derived from point mineralization and anthropogenic activities such as mining or industrial activities. These background and reference levels are often published by each country or region. Although many regions in Spain have determined these levels, Castilla-La Mancha present incomplete partial information due to its extensive (79461 km2), complex geology (Variscan (meta)sedimentary and granitic domain, Alpine domain, Undeformed Mesozoic domain and Post-Alpine domain) and diverse mining activities (Almadén Hg district, Pg-Ag-Zn-Cu districts, Sb district, Campos de Calatrava volcanic field, clay, granite, Ca salts, Na salts and Diatomites mining areas). Given this scenario, the main objective of this work is to evaluate the applicability of portable x-ray fluorescence (pXRF) techniques to the determination of generic reference levels from large datasets. The proposal involves the analysis of a shortened pretreatment method to get an aliquot for analysis, and an analytical data quality study using certified reference materials (Soil-1, Soil-2, NIST-R, STSP-2, STSP-3 and STSP-4). For this purpose, the fine fraction dried in the laboratory were analyzed with a pXRF spectrometer in different modes, with “mining mode” and “soil mode”. Optimization of analysis times was carried out, setting it in 45s as the optimum time, after testing 60 and 90 seconds. Recovery percentages of major elements using “Mining mode” ranged Al, Mgand Si and “Soil mode” Ca, Fe and K, and for trace elements using “Mining mode” ranged Nb and P and using “Soil mode” As, Ba, Cr, Cu, Mn, Ni, Pb, Rb, Sn, Sr, Ti, V, Zn, Zr. The following elements, Ag, Au, Cd, Co, Hg, Mo, Sn, Ta, Th and U have been discarded as being too different from the reference materials used. In conclusion, this rapid analysis technique offers an efficient solution for the characterization of large surface areas or the sampling of large number of samples. Of the analytical modes of pXRF, the “soil mode” is the most suitable in terms of quantification, providing results that are optimally adjusted to the analyzed patterns and on a larger number of analyzed elements.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessApplication of pXRF technique to the determination of major and trace elements in large soil datasets, advantages and limitations
Soil plays a fundamental role for both ecosystems and humans, and its characterization is an essential tool for strategic planning in areas such as agriculture, natural resource exploration and detection of potential soil contamination. To achive an effective geochemical characterization, it is necessary to study the background geochemical levels, considering the local geology of the environment and anomalous levels derived from point mineralization and anthropogenic activities such as mining or industrial activities. These background and reference levels are often published by each country or region. Although many regions in Spain have determined these levels, Castilla-La Mancha present incomplete partial information due to its extensive (79461 km2), complex geology (Variscan (meta)sedimentary and granitic domain, Alpine domain, Undeformed Mesozoic domain and Post-Alpine domain) and diverse mining activities (Almadén Hg district, Pg-Ag-Zn-Cu districts, Sb district, Campos de Calatrava volcanic field, clay, granite, Ca salts, Na salts and Diatomites mining areas). Given this scenario, the main objective of this work is to evaluate the applicability of portable x-ray fluorescence (pXRF) techniques to the determination of generic reference levels from large datasets. The proposal involves the analysis of a shortened pretreatment method to get an aliquot for analysis, and an analytical data quality study using certified reference materials (Soil-1, Soil-2, NIST-R, STSP-2, STSP-3 and STSP-4). For this purpose, the fine fraction dried in the laboratory were analyzed with a pXRF spectrometer in different modes, with “mining mode” and “soil mode”. Optimization of analysis times was carried out, setting it in 45s as the optimum time, after testing 60 and 90 seconds. Recovery percentages of major elements using “Mining mode” ranged Al, Mgand Si and “Soil mode” Ca, Fe and K, and for trace elements using “Mining mode” ranged Nb and P and using “Soil mode” As, Ba, Cr, Cu, Mn, Ni, Pb, Rb, Sn, Sr, Ti, V, Zn, Zr. The following elements, Ag, Au, Cd, Co, Hg, Mo, Sn, Ta, Th and U have been discarded as being too different from the reference materials used. In conclusion, this rapid analysis technique offers an efficient solution for the characterization of large surface areas or the sampling of large number of samples. Of the analytical modes of pXRF, the “soil mode” is the most suitable in terms of quantification, providing results that are optimally adjusted to the analyzed patterns and on a larger number of analyzed elements.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Dermal bioaccessibility and health risk of potential toxic elements (PTE) in mining environments (San Quintín Pb-Zn-Ag Mining Group and San Antonio Sb-W Mine, Spain).
Metallic mining was very relevant in Spain last century. Because of this, currently there are numerous abandoned mines that suppose an environmental and human health risk. San Quintín Mining District (Ciudad Real) and San Antonio (Badajoz) are two examples of ancient metallic mining in Spain. In both mines there are a large volume of wastes like tailings, dumps or contaminated soils enriched with Zn, Pb, As, Cd, and Sb. San Quintín is currently being part of a project restoration that involves movement of tons of contaminated material. Twelve soil samples were collected from San Quintín Mining District and twenty-one were collected from San Antonio mine.In these samples, the total trace element content was determined by X-Ray fluorescence spectrometry (XRF), in addition to other physicochemical parameters, such as pH and EC. To assess the human health risk, dermal bioaccessibility tests were carried out mixing wastes samples and two different synthetic sweats (EN1811 and NIHS96-10) during 2 and 8 hours.The obtained results suggested that extraction interval percentages were: 0.01-57.29% for Cd, 0.001-55.768% for Pb, 0.001-93.180% for Zn, for San Quintín samples, 0.002-2.825% for Sb, for San Antonio samples and 0.001-0.707% for As, for all samples considered. The highest values correspond to extraction carried out with the lowest pH synthetic sweat (NIHS96-10) and specially for Zn, Cd and Pb. Metalloids appear to be less available or bioaccessible than heavy metals. Direct dermal contact between mine wastes and human skin, could mean the absorption of elements extremely harmful to health, thus restoration workers and anyone who can have contact with wastes, can be in danger if there are no security measures.Contact with these mining residues poses a risk to human health, highlighting the necessity to assess not only dermal exposure but also inhalation and oral pathways for a comprehensive human risk assessment.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessDermal bioaccessibility and health risk of potential toxic elements (PTE) in mining environments (San Quintín Pb-Zn-Ag Mining Group and San Antonio Sb-W Mine, Spain).
Metallic mining was very relevant in Spain last century. Because of this, currently there are numerous abandoned mines that suppose an environmental and human health risk. San Quintín Mining District (Ciudad Real) and San Antonio (Badajoz) are two examples of ancient metallic mining in Spain. In both mines there are a large volume of wastes like tailings, dumps or contaminated soils enriched with Zn, Pb, As, Cd, and Sb. San Quintín is currently being part of a project restoration that involves movement of tons of contaminated material. Twelve soil samples were collected from San Quintín Mining District and twenty-one were collected from San Antonio mine.In these samples, the total trace element content was determined by X-Ray fluorescence spectrometry (XRF), in addition to other physicochemical parameters, such as pH and EC. To assess the human health risk, dermal bioaccessibility tests were carried out mixing wastes samples and two different synthetic sweats (EN1811 and NIHS96-10) during 2 and 8 hours.The obtained results suggested that extraction interval percentages were: 0.01-57.29% for Cd, 0.001-55.768% for Pb, 0.001-93.180% for Zn, for San Quintín samples, 0.002-2.825% for Sb, for San Antonio samples and 0.001-0.707% for As, for all samples considered. The highest values correspond to extraction carried out with the lowest pH synthetic sweat (NIHS96-10) and specially for Zn, Cd and Pb. Metalloids appear to be less available or bioaccessible than heavy metals. Direct dermal contact between mine wastes and human skin, could mean the absorption of elements extremely harmful to health, thus restoration workers and anyone who can have contact with wastes, can be in danger if there are no security measures.Contact with these mining residues poses a risk to human health, highlighting the necessity to assess not only dermal exposure but also inhalation and oral pathways for a comprehensive human risk assessment.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
3D Characterization of potentially toxic elements dispersion in Portman Bay using mineralogical and geochemical indicators
The exploitation of mineral resources is a fundamental activity for the development of societies, but the importance of the alterations caused to the environment has not been considered when carrying out these exploitations. In the case of metallic mining, sulphide oxidation and leaching of potentially toxic elements (PTEs) lead to soil and water pollution.Sierra Minera of Cartagena-La Unión (SE, Spain) has historically been a major mining district. Technological development caused production to rise during the second half of the 20th century, leading to an increase in tailings dumps, producing one of the biggest ecological disaster on the Mediterranean coast.Sediments from Portman Bay were collected during the Pilot Project for its regeneration (2008). Samples have been analyzed in 12 cores of 10 meters deep, with one sample every meter. Two cores were selected and analyzed to a depth of 24 meters in order to reach the original bedding material and thus be able to make a 3D model of the extent of the contamination at depth.The total PTEs content was determined after an acid digestion. In addition, a characterization of the mineralogical composition has been carried out by XRD, both in powder samples and oriented aggregates for the determination of bulk and clay mineralogy respectively.The materials studied showed sandy texture, except collected close to the discharge point, as in the core located in the internal area of the Bay, where the texture is finer. The total PTEs content is high and follows the following order of concentration: Zn > Pb > As > Cu > Cd.The mineralogical results showed the presence of quartz, feldespars and phyllosilicates in most of the samples. The rest of the minerals present in the samples correspond to different phases of Fe as sulphides (pyrite), oxides (hematite and magnetite), oxyhydroxides (goethite), carbonates (siderite) and sulphates with different states of hydration, such as jarosite. Gypsum appears in most of the samples, regardless of their depth. The presence of jarosite is relevant in the surface samples of cores in the inner part of the bay, as well as in the first line of cores located near the dumping point. In the case of cores located further away from the coastline, the presence of this phase has been detected both at surface and at depth.Clay mineralogical data revealed that samples with mining residues contain greenalite, chlorite and mica-illite as main minerals, with minor amounts of minnesotaite, kaolinite and smectite. On the other hand, in the samples from the deeper zones corresponding to the bedding materials, the phyllosilicates found are mica-illite, kaolinite and chlorite in order of abundance.The statistical integration of the results has allowed the selection of quartz, pyrite, siderite and arsenic as representative variables for the 3D model. Taking into account that the current reclamation project in the bay includes mobilization of part of the waste to a mining cut, the use of these 3D models is very useful as a complement to the geochemical and mineralogical characterization.
- 15 May 2023
- Published by Copernicus GmbH
Open Access3D Characterization of potentially toxic elements dispersion in Portman Bay using mineralogical and geochemical indicators
The exploitation of mineral resources is a fundamental activity for the development of societies, but the importance of the alterations caused to the environment has not been considered when carrying out these exploitations. In the case of metallic mining, sulphide oxidation and leaching of potentially toxic elements (PTEs) lead to soil and water pollution.Sierra Minera of Cartagena-La Unión (SE, Spain) has historically been a major mining district. Technological development caused production to rise during the second half of the 20th century, leading to an increase in tailings dumps, producing one of the biggest ecological disaster on the Mediterranean coast.Sediments from Portman Bay were collected during the Pilot Project for its regeneration (2008). Samples have been analyzed in 12 cores of 10 meters deep, with one sample every meter. Two cores were selected and analyzed to a depth of 24 meters in order to reach the original bedding material and thus be able to make a 3D model of the extent of the contamination at depth.The total PTEs content was determined after an acid digestion. In addition, a characterization of the mineralogical composition has been carried out by XRD, both in powder samples and oriented aggregates for the determination of bulk and clay mineralogy respectively.The materials studied showed sandy texture, except collected close to the discharge point, as in the core located in the internal area of the Bay, where the texture is finer. The total PTEs content is high and follows the following order of concentration: Zn > Pb > As > Cu > Cd.The mineralogical results showed the presence of quartz, feldespars and phyllosilicates in most of the samples. The rest of the minerals present in the samples correspond to different phases of Fe as sulphides (pyrite), oxides (hematite and magnetite), oxyhydroxides (goethite), carbonates (siderite) and sulphates with different states of hydration, such as jarosite. Gypsum appears in most of the samples, regardless of their depth. The presence of jarosite is relevant in the surface samples of cores in the inner part of the bay, as well as in the first line of cores located near the dumping point. In the case of cores located further away from the coastline, the presence of this phase has been detected both at surface and at depth.Clay mineralogical data revealed that samples with mining residues contain greenalite, chlorite and mica-illite as main minerals, with minor amounts of minnesotaite, kaolinite and smectite. On the other hand, in the samples from the deeper zones corresponding to the bedding materials, the phyllosilicates found are mica-illite, kaolinite and chlorite in order of abundance.The statistical integration of the results has allowed the selection of quartz, pyrite, siderite and arsenic as representative variables for the 3D model. Taking into account that the current reclamation project in the bay includes mobilization of part of the waste to a mining cut, the use of these 3D models is very useful as a complement to the geochemical and mineralogical characterization.
- Open Access
Categorization of Mining Materials for Restoration Projects by Means of Pollution Indices and Bioassays
Sulfide mining wastes may lead to severe environmental and human health risks. This study aims to use geochemical and ecotoxicological indicators for the assessment of the ecological risks of potentially toxic elements (PTEs) in the San Quintín mining group to categorize wastes prior to mining restoration. Ecotoxicity was evaluated using crustacean (Dahpnia magna, Thamnocephalus platyurus) and algae (Raphidocelis subcapitata) bioassays. The geochemical and mineralogical results suggested that the mining residues underwent intense weathering processes, with active processes of acidity generation and metal mobility. Total PTEs concentrations indicated that the mining materials were extremely polluted, with Pb, Zn and Cd geoaccumulation index (Igeo) values higher than 5 in more than 90% of the samples. The pollution load index (PLI) showed average values of 18.1, which classifies them as very highly polluted. The toxicity tests showed a higher toxicity for plants than crustaceans, being the highest values of toxicity related to toxic elements (Pb, Cd and Zn), electrical conductivity and to pH. This paper presents for the first time the combination of indices in the categorization of mining waste prior to its restoration. The combination of them has made it possible to categorize the waste and adapt the restoration and remediation procedures.
Open AccessCategorization of Mining Materials for Restoration Projects by Means of Pollution Indices and Bioassays
Sulfide mining wastes may lead to severe environmental and human health risks. This study aims to use geochemical and ecotoxicological indicators for the assessment of the ecological risks of potentially toxic elements (PTEs) in the San Quintín mining group to categorize wastes prior to mining restoration. Ecotoxicity was evaluated using crustacean (Dahpnia magna, Thamnocephalus platyurus) and algae (Raphidocelis subcapitata) bioassays. The geochemical and mineralogical results suggested that the mining residues underwent intense weathering processes, with active processes of acidity generation and metal mobility. Total PTEs concentrations indicated that the mining materials were extremely polluted, with Pb, Zn and Cd geoaccumulation index (Igeo) values higher than 5 in more than 90% of the samples. The pollution load index (PLI) showed average values of 18.1, which classifies them as very highly polluted. The toxicity tests showed a higher toxicity for plants than crustaceans, being the highest values of toxicity related to toxic elements (Pb, Cd and Zn), electrical conductivity and to pH. This paper presents for the first time the combination of indices in the categorization of mining waste prior to its restoration. The combination of them has made it possible to categorize the waste and adapt the restoration and remediation procedures.
- Open Access
- 22 February 2023
- Published by Copernicus GmbH
Categorization of mining waste based on geochemical and toxicological characterization data in restoration/remediation projects. Case study of the San Quintín Pb-Zn mine (Ciudad Real, Spain)
San Quintín is one of the derelict mines in Alcudia Valley Mining District, where large amounts of mining wastes have been disseminated during the last two centuries. These dumps and tailings materials are an important source of contamination of heavy metals and metalloids in the area. Nowadays, the restoration project for the abandoned mining area is beginning to be drafted, including a risk assessment of the wastes before restoration works. In this work, we carried out toxicity studies of these polluted materials, including data about total and soluble contain of As, Cd, Pb, Zn and Fe, mineralogical composition, and some bioassays to determine the toxicity effect of the samples to crustaceans (D. magna and T. platyurus) and algae (R. subcapitata). The pollution load index (PLI) has been calculated for each sample based on the pollution index (PI). Multielemental data and the indices calculated show that most of the samples present extremely high values of potentially toxic elements, and high values of contamination respect the background levels: 444 mg kg-1 Cd, 144,900 mg kg-1 Pb, 47,700 mg kg-1 Zn, 202,600 mg kg-1 Fe and 549 mg kg-1 As. The bioassays suggest a relationship with pH, conductivity and grainsize. The EC50 values were 458.7 to <2 of toxic units (TU) for D. Magna whereas for T. Platyurus the results oscillated between 2500 to <2. On the other hand, for algae organisms were 2083.3 to <2 TU. The studies carried out reveal the large accumulation of potentially toxic elements in mining waste and the risk they may pose to the associated ecosystems that develop in the area, as well as to human health.
- 22 February 2023
- Published by Copernicus GmbH
Open AccessCategorization of mining waste based on geochemical and toxicological characterization data in restoration/remediation projects. Case study of the San Quintín Pb-Zn mine (Ciudad Real, Spain)
San Quintín is one of the derelict mines in Alcudia Valley Mining District, where large amounts of mining wastes have been disseminated during the last two centuries. These dumps and tailings materials are an important source of contamination of heavy metals and metalloids in the area. Nowadays, the restoration project for the abandoned mining area is beginning to be drafted, including a risk assessment of the wastes before restoration works. In this work, we carried out toxicity studies of these polluted materials, including data about total and soluble contain of As, Cd, Pb, Zn and Fe, mineralogical composition, and some bioassays to determine the toxicity effect of the samples to crustaceans (D. magna and T. platyurus) and algae (R. subcapitata). The pollution load index (PLI) has been calculated for each sample based on the pollution index (PI). Multielemental data and the indices calculated show that most of the samples present extremely high values of potentially toxic elements, and high values of contamination respect the background levels: 444 mg kg-1 Cd, 144,900 mg kg-1 Pb, 47,700 mg kg-1 Zn, 202,600 mg kg-1 Fe and 549 mg kg-1 As. The bioassays suggest a relationship with pH, conductivity and grainsize. The EC50 values were 458.7 to <2 of toxic units (TU) for D. Magna whereas for T. Platyurus the results oscillated between 2500 to <2. On the other hand, for algae organisms were 2083.3 to <2 TU. The studies carried out reveal the large accumulation of potentially toxic elements in mining waste and the risk they may pose to the associated ecosystems that develop in the area, as well as to human health.