Serap Mert
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Serap Mert has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Olcay Mert
Department of Chemistry, Kocaeli University, 41001 Kocaeli, Türkiye
4 shared publications - Tuğba Koldankaya
Department of Polymer Science and Technology, Kocaeli University, Kocaeli, Türkiye
3 shared publications - Ayşenur Vardar
Department of Chemistry, Kocaeli University, 41001 Kocaeli, Türkiye
2 shared publications - Fevzi Uçkan
Kocaeli University
2 shared publications - Yusufhan Yazir
Department of Stem Cell, Institute of Health Sciences, Kocaeli University, 41001, Kocaeli, Turkey
2 shared publications - Zülbiye Demirtürk
Kocaeli University
2 shared publications
Latest Publications
- Open Access
- 11 November 2026
- Published by American Chemical Society (ACS) in ACS Omega
Preparation and Characterization of PHBV/PLA/TPS Blends Containing Citric Acid-Modified Thermoplastic Starch
The aim of this study was to modify the structural, mechanical, thermal, rheological, and morphological properties of PHBV-based blends through the incorporation of PLA and citric acid-modified thermoplastic starch (TPS). Although PHBV is a biodegradable polymer with environmental advantages, its processing challenges and relatively low mechanical performance limit its practical applications, which can be addressed by blending it with PLA and TPS to tailor the properties of the resulting materials. TPS was prepared by plasticizing corn starch with glycerol and incorporating different concentrations of citric acid (0, 5, and 10 wt %). Subsequently, PHBV/PLA/TPS blends were obtained by extrusion and characterized by Fourier-transform infrared spectroscopy (FTIR), tensile testing, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), rheological measurements, and scanning electron microscopy (SEM). The results demonstrated that the addition of citric acid altered the morphology, mechanical properties, and thermal behavior of TPS, while its effects on the PHBV/PLA/TPS blends depended strongly on blend composition. Among the TPS formulations, T5 exhibited the highest tensile strength (9.6 MPa), whereas 40PH/30P/30T0 showed the highest tensile strength among the blends (18.7 MPa). The 40PH/40P/20T10 formulation exhibited the most homogeneous morphology and the highest thermal stability among the ternary blends, with a maximum degradation temperature of 295 °C. Overall, the incorporation of PLA and citric acid-modified TPS enabled the properties of PHBV-based blends to be tailored through changes in composition and TPS modification, demonstrating their potential for the development of biodegradable materials with improved and tunable performance.
- 11 November 2026
- Published by American Chemical Society (ACS) in ACS Omega
Open AccessPreparation and Characterization of PHBV/PLA/TPS Blends Containing Citric Acid-Modified Thermoplastic Starch
The aim of this study was to modify the structural, mechanical, thermal, rheological, and morphological properties of PHBV-based blends through the incorporation of PLA and citric acid-modified thermoplastic starch (TPS). Although PHBV is a biodegradable polymer with environmental advantages, its processing challenges and relatively low mechanical performance limit its practical applications, which can be addressed by blending it with PLA and TPS to tailor the properties of the resulting materials. TPS was prepared by plasticizing corn starch with glycerol and incorporating different concentrations of citric acid (0, 5, and 10 wt %). Subsequently, PHBV/PLA/TPS blends were obtained by extrusion and characterized by Fourier-transform infrared spectroscopy (FTIR), tensile testing, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), rheological measurements, and scanning electron microscopy (SEM). The results demonstrated that the addition of citric acid altered the morphology, mechanical properties, and thermal behavior of TPS, while its effects on the PHBV/PLA/TPS blends depended strongly on blend composition. Among the TPS formulations, T5 exhibited the highest tensile strength (9.6 MPa), whereas 40PH/30P/30T0 showed the highest tensile strength among the blends (18.7 MPa). The 40PH/40P/20T10 formulation exhibited the most homogeneous morphology and the highest thermal stability among the ternary blends, with a maximum degradation temperature of 295 °C. Overall, the incorporation of PLA and citric acid-modified TPS enabled the properties of PHBV-based blends to be tailored through changes in composition and TPS modification, demonstrating their potential for the development of biodegradable materials with improved and tunable performance.
- Open Access
- 14 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (25) , 36813-36827
Electrosprayed Alginate–Fmoc Amino Acid Microcapsules for Quercetin Loading and Release
This study presents the development of hybrid microcapsules for the loading and release of quercetin, produced by incorporation of Fmoc-Tyrosine (Fmoc-Y) or Fmoc-Proline (Fmoc-Pro) into alginate, followed by Ca2+-ion-mediated cross-linking. The microcapsules produced using this method were characterized in terms of particle size, morphology, chemical structure (FTIR), release behavior, and swelling properties. An average diameter of microcapsules loaded with quercetin was measured at 187 ± 19 μm for Ca-Alginate, 154 ± 14 μm for Ca-Alginate/Fmoc-Y, and 131 ± 15 μm for Ca-Alginate/Fmoc-Pro. The inclusion of Fmoc-Pro or Fmoc-Y in the Ca-Alginate structure was shown by changes and shifts in the peak in FTIR. Rheological analyses revealed the flow behavior, viscoelastic properties, and shear-induced structural stability of alginate solutions used in microcapsule production. The incorporation of Fmoc-aa into alginate was intended to enhance the structural durability of the alginate matrix and thereby improve its drug release performance. Consistent with this expectation, examination of quercetin release at pH = 7.4 revealed that release from Ca-Alginate microcapsules was completed within 7 h, whereas release from the hybrid microcapsules extended to 24 h. Moreover, the zero-order model for Ca-Alginate microcapsules and the Korsmeyer–Peppas model for hybrid microcapsules were determined as the most appropriate mathematical models. The swelling behavior of the microcapsules was investigated at pH = 1.2 and 7.4. Although shrinkage occurred in the microcapsules at pH = 1.2, the spherical form was maintained in the first 7 h in hybrid and nonhybrid microcapsules. At pH = 7.4, it was observed that Ca-Alginate microcapsules were largely eroded approximately at the 6th hour, while hybrid Ca-Alginate/Fmoc-Y and Ca-Alginate/Fmoc-Pro microcapsules maintained their spherical form up to 16 h. These findings are supported by SEM analyses showing that hybrid microcapsules exhibit a more compact and less porous surface morphology compared to pure Ca-Alginate microcapsules.
- 14 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (25) , 36813-36827
Open AccessElectrosprayed Alginate–Fmoc Amino Acid Microcapsules for Quercetin Loading and Release
This study presents the development of hybrid microcapsules for the loading and release of quercetin, produced by incorporation of Fmoc-Tyrosine (Fmoc-Y) or Fmoc-Proline (Fmoc-Pro) into alginate, followed by Ca2+-ion-mediated cross-linking. The microcapsules produced using this method were characterized in terms of particle size, morphology, chemical structure (FTIR), release behavior, and swelling properties. An average diameter of microcapsules loaded with quercetin was measured at 187 ± 19 μm for Ca-Alginate, 154 ± 14 μm for Ca-Alginate/Fmoc-Y, and 131 ± 15 μm for Ca-Alginate/Fmoc-Pro. The inclusion of Fmoc-Pro or Fmoc-Y in the Ca-Alginate structure was shown by changes and shifts in the peak in FTIR. Rheological analyses revealed the flow behavior, viscoelastic properties, and shear-induced structural stability of alginate solutions used in microcapsule production. The incorporation of Fmoc-aa into alginate was intended to enhance the structural durability of the alginate matrix and thereby improve its drug release performance. Consistent with this expectation, examination of quercetin release at pH = 7.4 revealed that release from Ca-Alginate microcapsules was completed within 7 h, whereas release from the hybrid microcapsules extended to 24 h. Moreover, the zero-order model for Ca-Alginate microcapsules and the Korsmeyer–Peppas model for hybrid microcapsules were determined as the most appropriate mathematical models. The swelling behavior of the microcapsules was investigated at pH = 1.2 and 7.4. Although shrinkage occurred in the microcapsules at pH = 1.2, the spherical form was maintained in the first 7 h in hybrid and nonhybrid microcapsules. At pH = 7.4, it was observed that Ca-Alginate microcapsules were largely eroded approximately at the 6th hour, while hybrid Ca-Alginate/Fmoc-Y and Ca-Alginate/Fmoc-Pro microcapsules maintained their spherical form up to 16 h. These findings are supported by SEM analyses showing that hybrid microcapsules exhibit a more compact and less porous surface morphology compared to pure Ca-Alginate microcapsules.
- Open Access
- 5 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (24) , 35488-35502
Doxorubicin-Loaded Poly(Substituted Glycolide)-Based Nanoparticles for Long-Term Storage
Preventing agglomeration is crucial for polymeric nanoparticles (PNP) for drug-delivery applications. Suitable conditions for maintaining the size of doxorubicin (DOX)-loaded poly(diisobutyl glycolide) (PDIBG) and poly(diisopropyl glycolide) (PDIPG) nanoparticles (NP) during long-term storage were investigated in this study. After the synthesis of PDIBG and PDIPG homopolymers, DOX-loaded NPs were produced from these homopolymers by using a single-emulsion solvent evaporation method. The optimal formulations of DOX-loaded PDIBG and PDIPG-NPs were obtained with particle sizes of 253 ± 7 nm, PDIs of 0.06 ± 0.02, and an EE value of 58.3%, and particle sizes of 253 ± 7 nm, PDIs of 0.08 ± 0.04, and an EE value of 73.9%, respectively. To extend their shelf life, the developed NPs at three different concentrations (50, 70, and 90 mg/mL) were subjected to a comprehensive lyophilization process at two different freezing temperatures (−20 and −50 °C). As a result of the systematic lyophilization of sugar-containing and sugar-free formulations of DOX-loaded PDIBG and PDIPG-NPs under specific conditions, it was found that they could be stored at 4 and −20 °C for 2 months while maintaining their particle sizes and PDI values in the presence of glucose and sucrose (at 5 and 10% concentrations).
- 5 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (24) , 35488-35502
Open AccessDoxorubicin-Loaded Poly(Substituted Glycolide)-Based Nanoparticles for Long-Term Storage
Preventing agglomeration is crucial for polymeric nanoparticles (PNP) for drug-delivery applications. Suitable conditions for maintaining the size of doxorubicin (DOX)-loaded poly(diisobutyl glycolide) (PDIBG) and poly(diisopropyl glycolide) (PDIPG) nanoparticles (NP) during long-term storage were investigated in this study. After the synthesis of PDIBG and PDIPG homopolymers, DOX-loaded NPs were produced from these homopolymers by using a single-emulsion solvent evaporation method. The optimal formulations of DOX-loaded PDIBG and PDIPG-NPs were obtained with particle sizes of 253 ± 7 nm, PDIs of 0.06 ± 0.02, and an EE value of 58.3%, and particle sizes of 253 ± 7 nm, PDIs of 0.08 ± 0.04, and an EE value of 73.9%, respectively. To extend their shelf life, the developed NPs at three different concentrations (50, 70, and 90 mg/mL) were subjected to a comprehensive lyophilization process at two different freezing temperatures (−20 and −50 °C). As a result of the systematic lyophilization of sugar-containing and sugar-free formulations of DOX-loaded PDIBG and PDIPG-NPs under specific conditions, it was found that they could be stored at 4 and −20 °C for 2 months while maintaining their particle sizes and PDI values in the presence of glucose and sucrose (at 5 and 10% concentrations).
- Open Access
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (13) , 20936-20944
Investigation of Chloride Binding Abilities of Symmetric Squaramides
In this work, three symmetric squaramide derivatives were synthesized, and their anion-binding properties were systematically investigated. The binding properties of squaramides I–III with anions were determined by spectroscopic titration in DMSO-d 6 using tetrabutyl ammonium salts. During titration with ammonium salts, the shift values of the protons of NH groups in the squaramide structure were recorded in 1H NMR. The variations in the chemical shifts of NH protons in the squaramides were analyzed with the DynaFit and BindFit programs to obtain the corresponding association constants. The greatest chemical shift was obtained from TBA-Cl with squaramide I titration, and it has the highest binding capacity with squaramide I and Cl– anion. Therefore, it was found that both the number of CF3 groups on the aromatic ring and the number of CH2 groups between the aromatic ring and the amide moiety in the structure of squaramide influence the strength of the anion binding ability. The stoichiometry of complexation between squaramides I–III and Cl– was also investigated using Job’s plots.
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (13) , 20936-20944
Open AccessInvestigation of Chloride Binding Abilities of Symmetric Squaramides
In this work, three symmetric squaramide derivatives were synthesized, and their anion-binding properties were systematically investigated. The binding properties of squaramides I–III with anions were determined by spectroscopic titration in DMSO-d 6 using tetrabutyl ammonium salts. During titration with ammonium salts, the shift values of the protons of NH groups in the squaramide structure were recorded in 1H NMR. The variations in the chemical shifts of NH protons in the squaramides were analyzed with the DynaFit and BindFit programs to obtain the corresponding association constants. The greatest chemical shift was obtained from TBA-Cl with squaramide I titration, and it has the highest binding capacity with squaramide I and Cl– anion. Therefore, it was found that both the number of CF3 groups on the aromatic ring and the number of CH2 groups between the aromatic ring and the amide moiety in the structure of squaramide influence the strength of the anion binding ability. The stoichiometry of complexation between squaramides I–III and Cl– was also investigated using Job’s plots.
- Open Access
- 27 October 2025
- Published by Springer Nature in Journal of Ovarian Research
- Vol. 18 (1) , 1-16
Quercetin-loaded mesenchymal stem cell derived extracellular vesicles enhance ovarian function in a cyclophosphamide induced ovarian damage
Background: To investigate whether intraovarian administration of quercetin-loaded extracellular vesicles derived from Wharton’s jelly mesenchymal stem cells (EVs-QUE) improves ovarian function in a cyclophosphamide (CTX)-induced premature ovarian insufficiency (POI) rat model. Methods: Human Wharton’s jelly-derived mesenchymal stem cells (MSCs) were cultured, and extracellular vesicles (EVs) were isolated and characterized by flow cytometry and electron microscopy. Quercetin was loaded onto EVs using ultrasonic incubation to generate EVs-QUE. A rat model of CTX-induced POI was established, and the subjects received intraovarian injections of either EVs or EVs-QUE. Ovarian function was assessed through histological evaluation, immunofluorescence staining, and gene expression analysis. Results: Treatment with EVs-QUE significantly improved ovarian morphology and folliculogenesis, reduced the number of atretic follicles, and decreased Casp3 expression. Proliferation markers ( Ki67 , Pcna ) and antioxidant genes ( Nrf2 , Sod1 ) were upregulated. Additionally, steroidogenesis- and oocyte-related genes ( Star , Gdf9 , Bmp15 ) showed increased expression. Although systemic hormonal alterations were limited, local tissue analysis confirmed a regenerative effect in the EVs-QUE group. Conclusions: Quercetin-loaded EVs derived from Wharton’s jelly MSCs enhanced ovarian recovery in a CTX-induced POI model through anti-apoptotic, pro-proliferative, and antioxidant pathways. These findings suggest that intraovarian administration of EVs-QUE may represent a promising strategy for fertility preservation and warrant further investigation in long-term and translational studies.
- 27 October 2025
- Published by Springer Nature in Journal of Ovarian Research
- Vol. 18 (1) , 1-16
Open AccessQuercetin-loaded mesenchymal stem cell derived extracellular vesicles enhance ovarian function in a cyclophosphamide induced ovarian damage
Background: To investigate whether intraovarian administration of quercetin-loaded extracellular vesicles derived from Wharton’s jelly mesenchymal stem cells (EVs-QUE) improves ovarian function in a cyclophosphamide (CTX)-induced premature ovarian insufficiency (POI) rat model. Methods: Human Wharton’s jelly-derived mesenchymal stem cells (MSCs) were cultured, and extracellular vesicles (EVs) were isolated and characterized by flow cytometry and electron microscopy. Quercetin was loaded onto EVs using ultrasonic incubation to generate EVs-QUE. A rat model of CTX-induced POI was established, and the subjects received intraovarian injections of either EVs or EVs-QUE. Ovarian function was assessed through histological evaluation, immunofluorescence staining, and gene expression analysis. Results: Treatment with EVs-QUE significantly improved ovarian morphology and folliculogenesis, reduced the number of atretic follicles, and decreased Casp3 expression. Proliferation markers ( Ki67 , Pcna ) and antioxidant genes ( Nrf2 , Sod1 ) were upregulated. Additionally, steroidogenesis- and oocyte-related genes ( Star , Gdf9 , Bmp15 ) showed increased expression. Although systemic hormonal alterations were limited, local tissue analysis confirmed a regenerative effect in the EVs-QUE group. Conclusions: Quercetin-loaded EVs derived from Wharton’s jelly MSCs enhanced ovarian recovery in a CTX-induced POI model through anti-apoptotic, pro-proliferative, and antioxidant pathways. These findings suggest that intraovarian administration of EVs-QUE may represent a promising strategy for fertility preservation and warrant further investigation in long-term and translational studies.
- Open Access
- 4 September 2025
- Published by Wiley in CNS Neuroscience & Therapeutics
- Vol. 31 (9) , e70576
The Effects of PLGA Nanoparticles Containing Different Growth Factors on Neural Stem Cell Differentiation and Their Transition Efficiency After Targeting With TRF
Aims: Nanoparticle‐mediated drug delivery systems are being investigated for the controlled release of drugs to treat neurodegenerative diseases (ND). We aimed to investigate the effects of poly(lactic‐co‐glycolic acid) nanoparticles (PLGA‐NPs) containing different growth factors (GFs) on rat brain‐derived neural stem cells (NSCs) in vitro differentiation, providing insights that may contribute to future approaches for treating Parkinson's disease.Methods: Three different PLGA‐NPs loaded with Brain‐Derived Neurotrophic Factor (BDNF), Glial‐Derived Neurotrophic Factor (GDNF), and Transforming Growth Factor beta 3 (TGF‐β3) were developed and characterized in terms of size, zeta potential, encapsulation efficiency, and release profile. These NPs were used to differentiate NSCs into dopaminergic neurons in vitro. Additionally, the transition of transferrin (TRF)‐conjugated PLGA‐COOH‐NPs across an in vitro blood–brain barrier (BBB) model was investigated.Results: The average sizes of BDNF, GDNF, and TGF‐ß3 loaded PLGA‐NPs were measured to be 217.17 ± 1.37, 227.37 ± 5.39, and 220.57 ± 10.10 nm, respectively. Besides, SEM imaging revealed that the particles had a homogeneous size distribution and smooth surface morphology. Microtubule‐associated protein 2 (Map2) and tyrosine hydroxylase (TH), two dopaminergic neuronal markers, were found in cells with neuron‐like morphology that were produced through in vitro differentiation. The cellular uptake of PLGA‐NPs loaded with Coumarin‐6 was determined by using confocal imaging and flow cytometry. It was demonstrated that TRF‐conjugated NPs were specifically targeted and taken up into NSCs in the in vitro BBB model.Conclusion: It is concluded that BDNF‐PLGA‐NPs, GDNF‐PLGA‐NPs, and TGF‐ß3‐PLGA‐NPs are promising brain drug delivery carriers for NSC inducers, which could be useful in developing strategies for Parkinson's disease management, particularly when targeted with TRF.
- 4 September 2025
- Published by Wiley in CNS Neuroscience & Therapeutics
- Vol. 31 (9) , e70576
Open AccessThe Effects of PLGA Nanoparticles Containing Different Growth Factors on Neural Stem Cell Differentiation and Their Transition Efficiency After Targeting With TRF
Aims: Nanoparticle‐mediated drug delivery systems are being investigated for the controlled release of drugs to treat neurodegenerative diseases (ND). We aimed to investigate the effects of poly(lactic‐co‐glycolic acid) nanoparticles (PLGA‐NPs) containing different growth factors (GFs) on rat brain‐derived neural stem cells (NSCs) in vitro differentiation, providing insights that may contribute to future approaches for treating Parkinson's disease.Methods: Three different PLGA‐NPs loaded with Brain‐Derived Neurotrophic Factor (BDNF), Glial‐Derived Neurotrophic Factor (GDNF), and Transforming Growth Factor beta 3 (TGF‐β3) were developed and characterized in terms of size, zeta potential, encapsulation efficiency, and release profile. These NPs were used to differentiate NSCs into dopaminergic neurons in vitro. Additionally, the transition of transferrin (TRF)‐conjugated PLGA‐COOH‐NPs across an in vitro blood–brain barrier (BBB) model was investigated.Results: The average sizes of BDNF, GDNF, and TGF‐ß3 loaded PLGA‐NPs were measured to be 217.17 ± 1.37, 227.37 ± 5.39, and 220.57 ± 10.10 nm, respectively. Besides, SEM imaging revealed that the particles had a homogeneous size distribution and smooth surface morphology. Microtubule‐associated protein 2 (Map2) and tyrosine hydroxylase (TH), two dopaminergic neuronal markers, were found in cells with neuron‐like morphology that were produced through in vitro differentiation. The cellular uptake of PLGA‐NPs loaded with Coumarin‐6 was determined by using confocal imaging and flow cytometry. It was demonstrated that TRF‐conjugated NPs were specifically targeted and taken up into NSCs in the in vitro BBB model.Conclusion: It is concluded that BDNF‐PLGA‐NPs, GDNF‐PLGA‐NPs, and TGF‐ß3‐PLGA‐NPs are promising brain drug delivery carriers for NSC inducers, which could be useful in developing strategies for Parkinson's disease management, particularly when targeted with TRF.
- 9 June 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (22)
Ring‐Opening Polymerization of D ‐Lactide with Trans ‐ and Cis ‐DACH‐Based Bifunctional Squaramide Organocatalysts at Ambient Temperature
D ‐Lactide ( D ‐LA) monomer was polymerized at 20 °C by ring‐opening polymerization (ROP) in the presence of twelve different trans ‐ and cis ‐diaminocyclohexane (DACH) bifunctional squaramide organocatalysts. Almost all poly( D ‐lactide) (PDLA) polymers were synthesized in very high conversions (>99%) and very narrow PDI values between 1.07 and 1.13 according to spectroscopic (NMR) and chromatographic (GPC) analyses. Among all trans / cis ‐DACH‐based squaramide catalysts tested, the PDLA with the highest M n was obtained in the presence of trans ‐ 3 catalyst containing 3,5‐bis(trifluoromethyl)phenyl)amine on one side of squaramide and a piperidine ring attached to DACH on the other side. Moreover, while the molarity of the benzyl alcohol (BnOH) initiator was kept constant in the presence of trans ‐ 3 , the M n values of PDLA increased in accordance with the theoretical values as a result of the increased D ‐LA feed ratio. Cis ‐ 9 , the isomer of trans ‐ 3 , catalyst was the most effective among cis catalysts in D ‐LA of ROP. The catalytic performance of both trans ‐ 3 and cis ‐ 9 catalysts in the ROP of D ‐LA is likely attributable to their pronounced acidity. When the methyl protons of PDLA‐ 3 and 9 were irradiated in the double resonance 1 H NMR, the neighboring methine proton peak was transformed from a quartet to a single peak, which ensures selective PDLA polymerization and no racemization or epimerization. Trans ‐ 3 and cis ‐ 9 catalysts resulted in a polymer with semi‐crystalline character with close T g (∼50 °C) and T cc (∼89 °C) values in DSC analyses, but PDLA‐ 9 obtained with cis ‐ 9 has higher Δ H m and Δ H cc values, indicating that this polymer has higher crystallinity, and two different T m values for PDLA‐ 3 show that it has two different crystal morphologies.
- 9 June 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (22)
Ring‐Opening Polymerization of D ‐Lactide with Trans ‐ and Cis ‐DACH‐Based Bifunctional Squaramide Organocatalysts at Ambient Temperature
D ‐Lactide ( D ‐LA) monomer was polymerized at 20 °C by ring‐opening polymerization (ROP) in the presence of twelve different trans ‐ and cis ‐diaminocyclohexane (DACH) bifunctional squaramide organocatalysts. Almost all poly( D ‐lactide) (PDLA) polymers were synthesized in very high conversions (>99%) and very narrow PDI values between 1.07 and 1.13 according to spectroscopic (NMR) and chromatographic (GPC) analyses. Among all trans / cis ‐DACH‐based squaramide catalysts tested, the PDLA with the highest M n was obtained in the presence of trans ‐ 3 catalyst containing 3,5‐bis(trifluoromethyl)phenyl)amine on one side of squaramide and a piperidine ring attached to DACH on the other side. Moreover, while the molarity of the benzyl alcohol (BnOH) initiator was kept constant in the presence of trans ‐ 3 , the M n values of PDLA increased in accordance with the theoretical values as a result of the increased D ‐LA feed ratio. Cis ‐ 9 , the isomer of trans ‐ 3 , catalyst was the most effective among cis catalysts in D ‐LA of ROP. The catalytic performance of both trans ‐ 3 and cis ‐ 9 catalysts in the ROP of D ‐LA is likely attributable to their pronounced acidity. When the methyl protons of PDLA‐ 3 and 9 were irradiated in the double resonance 1 H NMR, the neighboring methine proton peak was transformed from a quartet to a single peak, which ensures selective PDLA polymerization and no racemization or epimerization. Trans ‐ 3 and cis ‐ 9 catalysts resulted in a polymer with semi‐crystalline character with close T g (∼50 °C) and T cc (∼89 °C) values in DSC analyses, but PDLA‐ 9 obtained with cis ‐ 9 has higher Δ H m and Δ H cc values, indicating that this polymer has higher crystallinity, and two different T m values for PDLA‐ 3 show that it has two different crystal morphologies.
- Open Access
- 20 February 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (8) , 8499-8511
Synthesis, Hydrolytic Degradation Behavior, and Surface Properties of Poly(alkyl glycolide)-Polyglycolide Copolymers
Given the environmental impact of polymers on our daily lives, the development of biodegradable polymers is becoming increasingly critical. Poly(diisobutyl glycolide)-polyglycolide (PDIBG-PGA) and poly(diisopropyl glycolide)-polyglycolide (PDIPG-PGA) copolymers, which are structurally similar to polylactic-co-glycolic acid (PLGA) polyesters frequently used in the field of biomaterials, were synthesized via ring-opening polymerization (ROP) of glycolide with l-diisobutyl glycolide (l-DIBG) or l-diisopropyl glycolide (l-DIPG), respectively, in various molecular weights (M w GPC: 15.5-40.0 kDa) and in high yields (up to 85.0%). The wettability characteristics of biodegradable polymers are important not only in air but also for their behavior in underwater environments. PDIBG-PGA silica composites, due to their amphiphilic nature, exhibited water contact angles between 72° and 85° in air, unaffected by the increasing addition of hydrophilic silica nanoparticles. However, underwater-oil contact angles increased from 75° to 165° as a result of the higher silica nanoparticle content and enhanced surface roughness. When the silica content reached 30%, the surface demonstrated self-cleaning and oil-repellent properties underwater, attributed to the Cassie state, which trapped air within the surface's hierarchical roughness. Furthermore, the surface free energy (SFE) values of PDIBG-PGA and PDIPG-PGA copolymer films were evaluated using the Owens-Wendt method, which revealed an increasing underwater hexadecane contact angle as the polar component interactions increased. Differential scanning calorimetry analysis revealed that all synthesized copolymers were amorphous, and the glass transition temperatures (T g) increased with the increase in the molecular weight of the copolymers (for instance, M n GPC: 9560 g/mol → T g: 25.1 °C vs M n GPC: 20,850 g/mol → T g: 32.3 °C for PDIBG-PGA; M n GPC: 10,670 g/mol → T g: 37.7 °C vs M n GPC: 23,360 g/mol → T g: 42.3 °C for PDIPG-PGA). The molecular weight decreases of 88.3% and 76.5% and mass losses of 36.7% and 12.3% were observed for PDIBG-PGA and PDIPG-PGA copolymers after 8 weeks of hydrolytic degradation, respectively. The faster degradation of PDIBG-PGA (T g: 25.1 °C) than PDIPG-PGA (T g: 37.7 °C) may be attributed to the T g below the hydrolytic degradation temperature (37 °C) because of an increase in the mobility of PDIBG-PGA polymer chains, allowing water molecules to transfer more easily through the matrix.
- 20 February 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (8) , 8499-8511
Open AccessSynthesis, Hydrolytic Degradation Behavior, and Surface Properties of Poly(alkyl glycolide)-Polyglycolide Copolymers
Given the environmental impact of polymers on our daily lives, the development of biodegradable polymers is becoming increasingly critical. Poly(diisobutyl glycolide)-polyglycolide (PDIBG-PGA) and poly(diisopropyl glycolide)-polyglycolide (PDIPG-PGA) copolymers, which are structurally similar to polylactic-co-glycolic acid (PLGA) polyesters frequently used in the field of biomaterials, were synthesized via ring-opening polymerization (ROP) of glycolide with l-diisobutyl glycolide (l-DIBG) or l-diisopropyl glycolide (l-DIPG), respectively, in various molecular weights (M w GPC: 15.5-40.0 kDa) and in high yields (up to 85.0%). The wettability characteristics of biodegradable polymers are important not only in air but also for their behavior in underwater environments. PDIBG-PGA silica composites, due to their amphiphilic nature, exhibited water contact angles between 72° and 85° in air, unaffected by the increasing addition of hydrophilic silica nanoparticles. However, underwater-oil contact angles increased from 75° to 165° as a result of the higher silica nanoparticle content and enhanced surface roughness. When the silica content reached 30%, the surface demonstrated self-cleaning and oil-repellent properties underwater, attributed to the Cassie state, which trapped air within the surface's hierarchical roughness. Furthermore, the surface free energy (SFE) values of PDIBG-PGA and PDIPG-PGA copolymer films were evaluated using the Owens-Wendt method, which revealed an increasing underwater hexadecane contact angle as the polar component interactions increased. Differential scanning calorimetry analysis revealed that all synthesized copolymers were amorphous, and the glass transition temperatures (T g) increased with the increase in the molecular weight of the copolymers (for instance, M n GPC: 9560 g/mol → T g: 25.1 °C vs M n GPC: 20,850 g/mol → T g: 32.3 °C for PDIBG-PGA; M n GPC: 10,670 g/mol → T g: 37.7 °C vs M n GPC: 23,360 g/mol → T g: 42.3 °C for PDIPG-PGA). The molecular weight decreases of 88.3% and 76.5% and mass losses of 36.7% and 12.3% were observed for PDIBG-PGA and PDIPG-PGA copolymers after 8 weeks of hydrolytic degradation, respectively. The faster degradation of PDIBG-PGA (T g: 25.1 °C) than PDIPG-PGA (T g: 37.7 °C) may be attributed to the T g below the hydrolytic degradation temperature (37 °C) because of an increase in the mobility of PDIBG-PGA polymer chains, allowing water molecules to transfer more easily through the matrix.
- 14 January 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (14)
Ba‐Alginate Microspheres for Protein Encapsulation by Aerosolization
The encapsulation efficiency, release profiles, and kinetics of BSA from Ba‐alginate microcapsules with the size of 150–215 μm, prepared by aerosolization method starting from different BSA concentrations (w/v: 0.05%, 0.10%, 0.15%, and 0.30%), were investigated. The critical BSA w/v ratio was found to be 0.15%, and BSA release from both Ba‐ and Ca‐alginate microcapsules, prepared for comparison, was continued up to 25 and 3 h, respectively. Korsmeyer‐Peppas model was found to be valid for Ba‐alginate microcapsules according to release kinetics analysis. BSA‐loaded Ba‐alginate microcapsules were more durable and had a longer release profile than Ca‐alginate microcapsules. FTIR analysis of Ca‐alginate and Ba‐alginate microcapsules confirms the cross‐linking of Ca2+ and Ba2+ ions with alginate and supports the presence of BSA in BSA‐loaded Ba and Ca‐alginate microcapsules. Moreover, the developed BSA‐Ba‐alginate microcapsules did not show swelling behavior at pH = 1.2 and remained intact in sodium citrate solution until 24 h. These results demonstrate that Ba‐alginate microcapsules are resistant in the stomach environment and suitable for encapsulation of water‐soluble molecules such as BSA.
- 14 January 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (14)
Ba‐Alginate Microspheres for Protein Encapsulation by Aerosolization
The encapsulation efficiency, release profiles, and kinetics of BSA from Ba‐alginate microcapsules with the size of 150–215 μm, prepared by aerosolization method starting from different BSA concentrations (w/v: 0.05%, 0.10%, 0.15%, and 0.30%), were investigated. The critical BSA w/v ratio was found to be 0.15%, and BSA release from both Ba‐ and Ca‐alginate microcapsules, prepared for comparison, was continued up to 25 and 3 h, respectively. Korsmeyer‐Peppas model was found to be valid for Ba‐alginate microcapsules according to release kinetics analysis. BSA‐loaded Ba‐alginate microcapsules were more durable and had a longer release profile than Ca‐alginate microcapsules. FTIR analysis of Ca‐alginate and Ba‐alginate microcapsules confirms the cross‐linking of Ca2+ and Ba2+ ions with alginate and supports the presence of BSA in BSA‐loaded Ba and Ca‐alginate microcapsules. Moreover, the developed BSA‐Ba‐alginate microcapsules did not show swelling behavior at pH = 1.2 and remained intact in sodium citrate solution until 24 h. These results demonstrate that Ba‐alginate microcapsules are resistant in the stomach environment and suitable for encapsulation of water‐soluble molecules such as BSA.
- Open Access
- 1 January 2025
- Published by Commagene Journal of Biology in Commagene Journal of Biology
- Vol. 9 (1) , 49-58
Alterations Induced by Nano-Polystyrene Administration in Biological Parameters of Host-Endoparasitoids (Galleria mellonella and Pimpla turionellae) and Host Hemocyte Counts
Plastic pollution is one of the biggest threats to the environment and human health. Micro and nanoplastics are encountered in many areas of our daily lives and may accumulate in organisms, causing reduced life span, genotoxicity, and altered metabolism. Plastic pollution around the environment may lead to reductions in insect biodiversity and populations. It may also lead to the collapse of food webs and ecosystems of organisms that feed on them in the food chain. Therefore, the effects of nano-polystyrene (PSs) on the life cycle, biological characteristics, total hemocyte count (THCs) of the host, and hemocyte types of the model organism Galleria mellonella and its endoparasitoid Pimpla turionellae were investigated. Nano-PSs were produced according to the single emulsion solvent evaporation method and larval feeds were prepared with solutions of different concentrations. These diets were given to the larvae until they developed. The developmental time of the host-larvae fed with nano-PS-containing diets and the parasitoids that emerged using the pupae of these larvae as hosts were shortened. While the host adult weight and size increased, the weight of the parasitoid decreased. Dose-dependent decreases in THCs were observed. Prohemocyte, plasmatocyte, oenocytoid, and spherulocyte counts decreased, while granulocyte counts increased. Furthermore, the changes in the biology of the host exposed to nano-PSs indirectly affected the endoparasitoids. In addition, this study emphasizes that nanoplastic toxicity in honey-bees is generally ignored and that the consumption of bee products may pose potential hazards to human health. This reveals the crucial role of taking necessary precautions in beekeeping.
- 1 January 2025
- Published by Commagene Journal of Biology in Commagene Journal of Biology
- Vol. 9 (1) , 49-58
Open AccessAlterations Induced by Nano-Polystyrene Administration in Biological Parameters of Host-Endoparasitoids (Galleria mellonella and Pimpla turionellae) and Host Hemocyte Counts
Plastic pollution is one of the biggest threats to the environment and human health. Micro and nanoplastics are encountered in many areas of our daily lives and may accumulate in organisms, causing reduced life span, genotoxicity, and altered metabolism. Plastic pollution around the environment may lead to reductions in insect biodiversity and populations. It may also lead to the collapse of food webs and ecosystems of organisms that feed on them in the food chain. Therefore, the effects of nano-polystyrene (PSs) on the life cycle, biological characteristics, total hemocyte count (THCs) of the host, and hemocyte types of the model organism Galleria mellonella and its endoparasitoid Pimpla turionellae were investigated. Nano-PSs were produced according to the single emulsion solvent evaporation method and larval feeds were prepared with solutions of different concentrations. These diets were given to the larvae until they developed. The developmental time of the host-larvae fed with nano-PS-containing diets and the parasitoids that emerged using the pupae of these larvae as hosts were shortened. While the host adult weight and size increased, the weight of the parasitoid decreased. Dose-dependent decreases in THCs were observed. Prohemocyte, plasmatocyte, oenocytoid, and spherulocyte counts decreased, while granulocyte counts increased. Furthermore, the changes in the biology of the host exposed to nano-PSs indirectly affected the endoparasitoids. In addition, this study emphasizes that nanoplastic toxicity in honey-bees is generally ignored and that the consumption of bee products may pose potential hazards to human health. This reveals the crucial role of taking necessary precautions in beekeeping.