MTMason B. Tomson

Mason B. Tomson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mason B. Tomson has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Novel Barite Crystallization and Inhibition Model Based on Surface Adsorption

    by Zhaoyi Dai, Yue Zhao, Xin Wang, Amy T. Kan, Mason Tomson

    Summary: Inorganic mineral crystallization is a critical process for numerous industrial and geoengineering processes, including oil and gas production and transportation, geothermal energy exploitation, membrane filtration, cooling tower, heat exchanger, to mention a few. Its unexpected formation can cause significant engineering, economic, and safety issues. Scale inhibitors have been widely used in various geoengineering projects as one of the most efficient and economic methods for mineral scale control. However, after decades of research, the inhibition mechanisms still remain unknown. This study applied a newly developed mechanistic mineral crystallization and inhibition model to barite, one of the most difficult mineral scales to be remediated. This new model assumes that inhibitors prolong the crystallization induction time by adsorbing onto the nucleus surface following a Langmuir-type adsorption isotherm and increasing the surface tension. The new model accurately predicts the barite crystallization induction time without or with 10 commonly used scale inhibitors. More importantly, the adsorption affinity constants (i.e., KL) fitted with the new model from the barite crystallization induction time matched well with those fitted from the direct inhibitor adsorption testing and from measuring barite crystal growth rate changes due to various inhibitors. A good correlation was also observed between the KL values of various inhibitors with barite from this study and those with other minerals (i.e., hydroxyapatite and calcite) from the literature. Such good agreements and correlations validated the adsorption mechanism adopted in the new mechanistic model. This study will deepen the understanding of mineral crystallization and inhibition mechanisms and improve scale management in various industrial and geoengineering processes.


  • Open Access

    High Return Performance of Calcium Phosphonate (Ca-DTPMP) Colloidal Inhibitors for Squeeze Treatment in Shale Formations

    by Shujun Gao, Chong Dai, Xin Wang, Yue Zhao, Yi-Tsung Lu, Guannan Deng, Saebom Ko, Samiridhdi Paudyal, Khadouja Harouaka, Amy T. Kan, et al.

    The objective of this work was to develop nanomaterial inhibitor with long squeeze life for oil and gas production. Different surfactants, such as trisodium citrate (Na3Cit), cetyltrimethyl ammonium bromide, benzethonium chloride (Hyamine), and bipyridinium dibromide (Gemini), were added to synthesize nanoparticle Ca-DTPMP inhibitor at pH 9.0. The inhibitors were characterized by scanning electron microscope and dynamic light scattering. All these surfactants significantly decreased the particle size, but Gemini was the most effective one to control the calcium phosphonate salt particle size to be about 500 nm. Long-term squeeze experiments (∼3000 PV) saturated with calcite at 70°C and 75 psi back pressure through a glass column packed with Fayetteville shale rock show that the return DTPMP concentration was as high as 3 ppm for the Gemini–Ca-DTPMP colloidal inhibitor. This is an unprecedented improvement in comparison with the squeeze return of DTPMP only inhibitor where the inhibitor return concentration dropped to below 1 ppm within 400 pore volumes. The Ca-DTPMP speciation, potential field application, and the SqueezeSoftPitzer model prediction are also discussed.


  • Open Access

    Critical Uncertainties and Gaps in the Environmental- and Social-Impact Assessment of the Proposed Interoceanic Canal through Nicaragua

    by Jorge A. Huete-Pérez, Manuel Ortega-Hegg, Gerald R. Urquhart, Alan P. Covich, Katherine Vammen, Bruce E. Rittmann, Julio C. Miranda, Sergio Espinoza-Corriols, Adolfo Acevedo, María L. Acosta, et al.

    The proposed interoceanic canal will connect the Caribbean Sea with the Pacific Ocean, traversing Lake Nicaragua, the major freshwater reservoir in Central America. If completed, the canal would be the largest infrastructure-related excavation project on Earth. In November 2015, the Nicaraguan government approved an environmental and social impact assessment (ESIA) for the canal. A group of international experts participated in a workshop organized by the Academy of Sciences of Nicaragua to review this ESIA. The group concluded that the ESIA does not meet international standards; essential information is lacking regarding the potential impacts on the lake, freshwater and marine environments, and biodiversity. The ESIA presents an inadequate assessment of natural hazards and socioeconomic disruptions. The panel recommends that work on the canal project be suspended until an appropriate ESIA is completed. The project should be resumed only if it is demonstrated to be economically feasible, environmentally acceptable, and socially beneficial.


  • Calcium Sulfate Scaling Risk and Inhibition for a Steamflood Project

    by Fangfu Zhang, Charles J. Hinrichsen, Amy T. Kan, Wei Wang, Wei Wei, Zhaoyi Dai, Fei Yan, Ya Liu, Narayan Bhandari, Zhang Zhang, et al.

    Steamflooding has been used as one of the emerging techniques to enhance heavy oil production. Scale control during steamflooding, on the other hand, can be challenging since the high temperature of the steamflood can decompose thermally unstable inhibitors and/or lead to the precipitation of metal-inhibitor pseudo-scale. In this paper, we present the analysis of the scaling risk and scale inhibition for a pilot steamflood project in a Middle Eastern oilfield. The formation of this field is a dolomite formation interbedded with anhydrite (CaSO4) streaks. Anhydrite has been observed to be the predominant scale form, which is presumably formed due to increased production system temperature as a result of steamflooding and/or mixing of steam condensate with incompatible connate water. Anhydrite is inherently difficult to control due to its high solubility and the high temperature conditions under which it forms. Compared to barite and carbonate, only limited knowledge has been acquired for anhydrite control. To predict the scaling tendency and inhibitor need in different wells of this field with different supersaturation level and temperature, a scaling risk model has been developed. To build such a model, detailed and revised laboratory procedures have been developed to study nucleation and precipitation kinetics of anhydrite at 125-175 ºC, different supersaturation, water composition, and long reaction time. Predictions of this scaling risk model suggest a saturation index (SI) of 0.8 as a critical SI for anhydrite control at >125 ºC. For example, when the SI is above 0.8, anhydrite will be difficult to control in the presence of threshold inhibitor. Model predictions were found to be consistent with scale occurrence observations in different wells of this field. With the recommended inhibitor concentrations, anhydrite scale has been controlled in this field, which provides validation that the proposed scaling risk model is a powerful tool to optimize scale treatment plan.


  • Scale Formation and Control Under Turbulent Conditions

    by Fei Yan, Narayan Bhandari, Fangfu Zhang, Gedeng Ruan, Zhaoyi Dai, Ya Liu, Zhang Zhang, Hamad Alsaiari, Amy Kan, Mason Tomson

    Static jar test and dynamic loop are two major test methods used for study of mineral scale formation and evaluation of scale inhibitors. In both methods, the flow is generally in the regime of laminar condition, which may not be representative of turbulent flow under field conditions. Turbulent flow in oilfield pipes is very common, especially around chokes, tubing joints, and safety values. The objective of this study is to investigate mineral scale formation and control under turbulent conditions. A novel testing method of rotating cylinder apparatus has been developed for turbulent conditions. In rotating cylinder experiments, highly turbulent flow (up to a Reynolds number of 11,000) was created by a rotating cylinder under field temperature of 70 °C. Barite scale formation and inhibition by several typical inhibitors were investigated under different flow conditions. During the experiments, barium concentration was measured periodically to determine scale kinetics. Barite precipitate was collected at the end of the experiment and examined by scanning electron microscope (SEM). Experimental results show no significant difference in precipitation kinetics between laminar and turbulent flow without scale inhibitors. However in the presence of scale inhibitors, precipitation kinetics was slower under high turbulence. SEM images also display major difference in barite size and morphology between different flow conditions. Highly crystalline barite with an average size of 10 µm was found in laminar flow, whereas amorphous or poorly crystalline barite of only sub micrometers was formed in turbulent flow. These results indicate that scale inhibitors may be more effective under some turbulent conditions, as opposed to previous observations. The insights presented in this work will help to understand scale control in oilfield pipes especially under turbulent conditions, and develop optimal doses of scale inhibitors with regard to flow regimes.


  • The Use of Inhibition Kinetics and NMR Spectroscopy in Thermal Stability Study of Scale Inhibitors

    by Wei Wang, Amy T. Kan, Chao Yan, Mason B. Tomson

    As the oil and gas industry is making firm stride in deepwater exploration and development, possible thermal degradation of scale inhibitor molecules poses a great challenge for scaling control and flow assurance for high temperature reservoirs. Although extensive research has been conducted to test thermal stability of scale inhibitors, little work has been devoted to study the thermodynamics/kinetics of thermal degradation of scale inhibitors. In this work a novel and efficient testing approach based on inhibition kinetics has been developed and successfully applied to determine the fraction of the initial inhibitor molecules in preheated samples of scale inhibitors with various generic chemistries. Moreover, for the first time, we have modeled the kinetics of inhibitor thermal degradation based on the integrated first-order rate equation and Arrhenius equation, with good agreements between the model predictions and experimental data. The preheated scale inhibitors have been analyzed by nuclear magnetic resonance (NMR) spectroscopy for organic compound characterization. Our results and predictions based on inhibition testing assay are consistent with the 31P/1H NMR analyses. This work has enabled an in-depth understanding of the time and temperature dependence of thermal degradation of scale inhibitors, and facilitates the rational selection and deployment of scale inhibitors for high temperature oil and gas production.