Guixin Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guixin Yang has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Haijun Pang
Harbin University of Science and Technology
12 shared publications - Xinming Wang
Harbin University of Science and Technology
11 shared publications - Huiyuan Ma
Harbin University of Science and Technology
6 shared publications Xiaojing Yu
Harbin University of Science and Technology
5 shared publicationsYongbin Song
Harbin University of Science and Technology
5 shared publications- Piaoping Yang
Harbin Engineering University
4 shared publications
Latest Publications
- 3 September 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (37) , 22006-22015
Three-Dimensional Hourglass-Type Polyoxometalate-Based Metal–Organic Frameworks for Electrocatalytic Nitrate Reduction to Ammonia
Electrocatalytic nitrate reduction reaction (e-NO3RR) provides a promising route for ambient NH3 production and nitrate valorization, but synchronizing multielectron transfer with stepwise hydrogenation remains challenging. Herein, two isostructural three-dimensional polyoxometalate-based metal–organic frameworks, [M(H2O)2HNCP]2(H4M2P4Mo6O33)[M0.5(H2O)3]·4H2O (M-P4Mo6-3D, M = Ni, Co), were hydrothermally synthesized from reduced hourglass {P4Mo6} clusters, Ni2+/Co2+ nodes, and HNCP linkers. Single-crystal X-ray diffraction confirms triclinic P1̅ structures with identical frameworks. The metal centers connect discrete {P4Mo6} units into hourglass M{P4Mo6}2 secondary building units that extend into three-dimensional coordination networks. Topological analysis using ToposPro identifies the framework as a uninodal six-connected pcu net with a point symbol of {412,63}. Ni–P4Mo6-3D exhibits superior e-NO3RR performance, achieving 98.6% NH3 Faradaic efficiency and an NH3 yield rate of 14.63 mg h–1 mgcat.–1 at −0.9 VRHE in neutral electrolyte. Electrochemical measurements indicate enhanced intrinsic activity and charge-transfer kinetics. Potential-dependent in situ FTIR and Raman spectroscopy reveal oxygenated and hydrogenated nitrogen intermediates, supporting a stepwise NO3– → *NO3 → *NO2 → *NO → *NOH → *NHOH → *NH2OH → *NH2 → NH3 reduction pathway.
- 3 September 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (37) , 22006-22015
Three-Dimensional Hourglass-Type Polyoxometalate-Based Metal–Organic Frameworks for Electrocatalytic Nitrate Reduction to Ammonia
Electrocatalytic nitrate reduction reaction (e-NO3RR) provides a promising route for ambient NH3 production and nitrate valorization, but synchronizing multielectron transfer with stepwise hydrogenation remains challenging. Herein, two isostructural three-dimensional polyoxometalate-based metal–organic frameworks, [M(H2O)2HNCP]2(H4M2P4Mo6O33)[M0.5(H2O)3]·4H2O (M-P4Mo6-3D, M = Ni, Co), were hydrothermally synthesized from reduced hourglass {P4Mo6} clusters, Ni2+/Co2+ nodes, and HNCP linkers. Single-crystal X-ray diffraction confirms triclinic P1̅ structures with identical frameworks. The metal centers connect discrete {P4Mo6} units into hourglass M{P4Mo6}2 secondary building units that extend into three-dimensional coordination networks. Topological analysis using ToposPro identifies the framework as a uninodal six-connected pcu net with a point symbol of {412,63}. Ni–P4Mo6-3D exhibits superior e-NO3RR performance, achieving 98.6% NH3 Faradaic efficiency and an NH3 yield rate of 14.63 mg h–1 mgcat.–1 at −0.9 VRHE in neutral electrolyte. Electrochemical measurements indicate enhanced intrinsic activity and charge-transfer kinetics. Potential-dependent in situ FTIR and Raman spectroscopy reveal oxygenated and hydrogenated nitrogen intermediates, supporting a stepwise NO3– → *NO3 → *NO2 → *NO → *NOH → *NHOH → *NH2OH → *NH2 → NH3 reduction pathway.
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (29) , 13959-13976
Cu 2 O-Coated Upconversion Nanoparticles Loaded on Ti 3 C 2 MXene for Multimodal Co-Catalytic Cancer Therapy
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (29) , 13959-13976
Cu 2 O-Coated Upconversion Nanoparticles Loaded on Ti 3 C 2 MXene for Multimodal Co-Catalytic Cancer Therapy
- 2 July 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (14) , 5537-5547
Copper-Modified Three-Dimensional Polyoxometalate-Based Metal–Organic Framework for Efficient Photocatalytic Hydrogen Production
- 2 July 2026
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (14) , 5537-5547
Copper-Modified Three-Dimensional Polyoxometalate-Based Metal–Organic Framework for Efficient Photocatalytic Hydrogen Production
- 23 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (26) , 14796-14808
Metal-Dependent Formation of Heteropoly Blue Anions in Keggin Polyoxometalate Catalysts for Enhanced H 2 Evolution with Iron(II)- and Cobalt(II)-Containing Counterions
Although polyoxometalates (POMs) exhibit outstanding photoelectric properties, their wide bandgaps and rapid photogenerated charge carrier recombination restrict in photocatalytic hydrogen evolution. Here, a metal-node modulation strategy is developed by coordinating Fe2+ or Co2+ with 2,2'-bipyridine (bpy) to form discrete cationic metal-organic complexes, which are assembled with Keggin-type [GeW12O40]4- anions to yield two supramolecular photocatalysts: [FeII(bpy)3]2[GeW12O40] (Fe2-GeW12) and [CoII(bpy)3][H2GeW12O40] (Co-GeW12). Density functional theory (DFT) and Independent Gradient Model Hirshfeld (IGMH) analyses reveal that Co-GeW12 possesses a higher HOMO energy level and constructs continuous, low-resistance electron-transport channels via a dense C-H···O hydrogen-bonding network. This configuration significantly lowers the kinetic barrier for interfacial electron delocalization compared to the discrete and intermittent pathways in Fe2-GeW12. Photocatalytic experiments show that Co-GeW12 achieves a H2 evolution rate of 12.9 mmol g-1 h-1, a 91.9-fold enhancement over pristine GeW12, and outperform most reported noble-metal-based analogues. Both catalysts retain >95% activity after 30 h. This comparative study establishes structure-property relationships governing band energetics and photocatalytic function in POM hybrids, paving a viable route toward scalable, noble-metal-free photocatalyst development.
- 23 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (26) , 14796-14808
Metal-Dependent Formation of Heteropoly Blue Anions in Keggin Polyoxometalate Catalysts for Enhanced H 2 Evolution with Iron(II)- and Cobalt(II)-Containing Counterions
Although polyoxometalates (POMs) exhibit outstanding photoelectric properties, their wide bandgaps and rapid photogenerated charge carrier recombination restrict in photocatalytic hydrogen evolution. Here, a metal-node modulation strategy is developed by coordinating Fe2+ or Co2+ with 2,2'-bipyridine (bpy) to form discrete cationic metal-organic complexes, which are assembled with Keggin-type [GeW12O40]4- anions to yield two supramolecular photocatalysts: [FeII(bpy)3]2[GeW12O40] (Fe2-GeW12) and [CoII(bpy)3][H2GeW12O40] (Co-GeW12). Density functional theory (DFT) and Independent Gradient Model Hirshfeld (IGMH) analyses reveal that Co-GeW12 possesses a higher HOMO energy level and constructs continuous, low-resistance electron-transport channels via a dense C-H···O hydrogen-bonding network. This configuration significantly lowers the kinetic barrier for interfacial electron delocalization compared to the discrete and intermittent pathways in Fe2-GeW12. Photocatalytic experiments show that Co-GeW12 achieves a H2 evolution rate of 12.9 mmol g-1 h-1, a 91.9-fold enhancement over pristine GeW12, and outperform most reported noble-metal-based analogues. Both catalysts retain >95% activity after 30 h. This comparative study establishes structure-property relationships governing band energetics and photocatalytic function in POM hybrids, paving a viable route toward scalable, noble-metal-free photocatalyst development.
- 27 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 9 (8) , 3957-3968
Fe-POM Anchored on mSiO 2 -Coated Upconversion Nanoparticles for Cascading Catalytic Nano-Synergistic Therapy
Traditional tumor treatments have limitations, such as poor targeting and systemic toxicity. Therefore, the development of intelligent nanotheranostic systems is necessary. In this work, we developed a multifunctional core-shell nanocomposite named upconversion nanoparticles (UCNPs) coated with mesoporous silica and anchored with Fe-substituted polyoxometalate (UCNPs@mSiO2/Fe-POM). This system uses UCNPs as the core for imaging. The core is encapsulated within a mesoporous silica (mSiO2) shell. This shell contains Fe-substituted polyoxometalate (POM, Fe-POM), in which Fe ions are incorporated into the POM framework to introduce redox-active catalytic sites, enabling efficient light-to-heat conversion. Consequently, this platform integrates computed tomography imaging with photothermal therapy (PTT) and chemodynamic therapy (CDT). Under 808 nm laser irradiation, Fe-POM acts as a photothermal agent for PTT. At the same time, it initiates Fenton-like reactions to generate cytotoxic hydroxyl radicals (·OH) for CDT. During this process, Fe2+ and Mo5+ oxidize to Fe3+ and Mo6+. Then, these ions react with intracellular glutathione (GSH). This converts GSH to glutathione disulfide (GSSG) while reducing the ions back to Fe2+ and Mo5+. This process maintains the reaction cycle. This continuous cycling occurs in the tumor microenvironment and consumes intracellular GSH. Due to this consumption, the tumor's antioxidant defense weakens. Thus, the therapeutic effect of CDT increases. This strategy, combined with the imaging capability of UCNPs, demonstrates excellent antitumor performance.
- 27 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 9 (8) , 3957-3968
Fe-POM Anchored on mSiO 2 -Coated Upconversion Nanoparticles for Cascading Catalytic Nano-Synergistic Therapy
Traditional tumor treatments have limitations, such as poor targeting and systemic toxicity. Therefore, the development of intelligent nanotheranostic systems is necessary. In this work, we developed a multifunctional core-shell nanocomposite named upconversion nanoparticles (UCNPs) coated with mesoporous silica and anchored with Fe-substituted polyoxometalate (UCNPs@mSiO2/Fe-POM). This system uses UCNPs as the core for imaging. The core is encapsulated within a mesoporous silica (mSiO2) shell. This shell contains Fe-substituted polyoxometalate (POM, Fe-POM), in which Fe ions are incorporated into the POM framework to introduce redox-active catalytic sites, enabling efficient light-to-heat conversion. Consequently, this platform integrates computed tomography imaging with photothermal therapy (PTT) and chemodynamic therapy (CDT). Under 808 nm laser irradiation, Fe-POM acts as a photothermal agent for PTT. At the same time, it initiates Fenton-like reactions to generate cytotoxic hydroxyl radicals (·OH) for CDT. During this process, Fe2+ and Mo5+ oxidize to Fe3+ and Mo6+. Then, these ions react with intracellular glutathione (GSH). This converts GSH to glutathione disulfide (GSSG) while reducing the ions back to Fe2+ and Mo5+. This process maintains the reaction cycle. This continuous cycling occurs in the tumor microenvironment and consumes intracellular GSH. Due to this consumption, the tumor's antioxidant defense weakens. Thus, the therapeutic effect of CDT increases. This strategy, combined with the imaging capability of UCNPs, demonstrates excellent antitumor performance.
- 25 November 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (48) , 23760-23772
Keplerate-Type Polyoxometalate Anchored on HKUST-1 Derivatives as a Robust Heterogeneous Catalyst for Synthesis of 2,3,6-Trimethyl-1,4-benzoquinone
Functionalized benzoquinones (p-BQs) are essential intermediates in biomedicine and fine chemical synthesis due to their structural diversity and broad chemical reactivity. The development of highly efficient heterogeneous catalysts for their selective production is therefore of considerable importance. In this work, we report a new heterogeneous catalyst, Mo72V30/CuOx/C, prepared by immobilizing a V-substituted Keplerate-type polyoxometalate (POM), Na8K16(VO)(H2O)5[K10⊂{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20]·150H2O (Mo72V30), onto a HKUST-1-derived CuOx/C support. The Mo72V30/CuOx/C catalyst exhibited exceptional activity in the oxidation of 2,3,6-trimethylphenol (TMP), achieving a conversion of over 99% and a yield of 95.3% within only 2 min, while maintaining high performance over five consecutive cycles. Until now, this represents the highest catalytic efficiency reported to date for this transformation. The exceptional catalytic performance stems from the catalyst's high surface area with porous structure, which is beneficial for TMP adsorption and activation, and the strong synergy among its multiple active centers that boosts reaction activity. DFT calculations further elucidated a cooperative dual-active-center mechanism at the atomic level.
- 25 November 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (48) , 23760-23772
Keplerate-Type Polyoxometalate Anchored on HKUST-1 Derivatives as a Robust Heterogeneous Catalyst for Synthesis of 2,3,6-Trimethyl-1,4-benzoquinone
Functionalized benzoquinones (p-BQs) are essential intermediates in biomedicine and fine chemical synthesis due to their structural diversity and broad chemical reactivity. The development of highly efficient heterogeneous catalysts for their selective production is therefore of considerable importance. In this work, we report a new heterogeneous catalyst, Mo72V30/CuOx/C, prepared by immobilizing a V-substituted Keplerate-type polyoxometalate (POM), Na8K16(VO)(H2O)5[K10⊂{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20]·150H2O (Mo72V30), onto a HKUST-1-derived CuOx/C support. The Mo72V30/CuOx/C catalyst exhibited exceptional activity in the oxidation of 2,3,6-trimethylphenol (TMP), achieving a conversion of over 99% and a yield of 95.3% within only 2 min, while maintaining high performance over five consecutive cycles. Until now, this represents the highest catalytic efficiency reported to date for this transformation. The exceptional catalytic performance stems from the catalyst's high surface area with porous structure, which is beneficial for TMP adsorption and activation, and the strong synergy among its multiple active centers that boosts reaction activity. DFT calculations further elucidated a cooperative dual-active-center mechanism at the atomic level.
- 8 August 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (16) , 6972-6981
Incorporating Pt into Hierarchical Sulfides Showing Ultrahigh H2 Evolution Electrocatalytic Activity Comparable to Commercial Pt/C
- 8 August 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (16) , 6972-6981
Incorporating Pt into Hierarchical Sulfides Showing Ultrahigh H2 Evolution Electrocatalytic Activity Comparable to Commercial Pt/C
- 23 April 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (9) , 7601-7612
Constructing Molecular Junctions with High-Spin Metal Sites in POMOFs to Trigger Heteropoly Blue States for Photocatalytic H2 Production
- 23 April 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (9) , 7601-7612
Constructing Molecular Junctions with High-Spin Metal Sites in POMOFs to Trigger Heteropoly Blue States for Photocatalytic H2 Production
- 30 March 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 64
Defect-rich heterometallic MoS2Co9S8CdS sulfides as peroxidase-like activators for efficient detection of hydroquinone
- 30 March 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 64
Defect-rich heterometallic MoS2Co9S8CdS sulfides as peroxidase-like activators for efficient detection of hydroquinone
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (17) , 6840-6846
Controllable distribution of surface-modified MIL-53 with ruthenium nanoparticles on nickel foam and its high efficiency electrocatalytic hydrogen evolution
Central to the development of electrocatalysts that are cost-effective and highly functional are the synthesis of materials and the meticulous delineation of their morphology. This article introduces a solvent-thermal method for constructing ruthenium-based electrocatalysts (Ru/MIL-53@NF), distinguished by the in situ generation of ruthenium nanoparticles (NPs) on MIL-53 with notable dispersion. The procedure requires precise control over ruthenium integration and results in electrocatalysts with exceptional dispersion properties. Furthermore, the optimally engineered Ru/MIL-53@NF exhibited outstanding electrocatalytic hydrogen evolution performance, registering an overpotential of merely 17 mV at 10 mA cm−2 and a Tafel slope of 53.7 mV dec−1, thus outstripping the standard 20 wt% Pt/C benchmark. This research highlights the careful calibration of synthetic parameters to forge ruthenium-based electrocatalysts with both high efficacy and stability.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (17) , 6840-6846
Controllable distribution of surface-modified MIL-53 with ruthenium nanoparticles on nickel foam and its high efficiency electrocatalytic hydrogen evolution
Central to the development of electrocatalysts that are cost-effective and highly functional are the synthesis of materials and the meticulous delineation of their morphology. This article introduces a solvent-thermal method for constructing ruthenium-based electrocatalysts (Ru/MIL-53@NF), distinguished by the in situ generation of ruthenium nanoparticles (NPs) on MIL-53 with notable dispersion. The procedure requires precise control over ruthenium integration and results in electrocatalysts with exceptional dispersion properties. Furthermore, the optimally engineered Ru/MIL-53@NF exhibited outstanding electrocatalytic hydrogen evolution performance, registering an overpotential of merely 17 mV at 10 mA cm−2 and a Tafel slope of 53.7 mV dec−1, thus outstripping the standard 20 wt% Pt/C benchmark. This research highlights the careful calibration of synthetic parameters to forge ruthenium-based electrocatalysts with both high efficacy and stability.