Diksha Haswani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Diksha Haswani has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Ramya Sunder Raman
Department of Earth and Environmental Sciences, Indian Institute of Science Education and Research Bhopal, Bhopal, India
7 shared publications - Abisheg Dhandapani
Department of Civil and Environmental Engineering Birla Institute of Technology Mesra Ranchi India
4 shared publications - Delwin Pullokaran
Department of Earth and Environmental Sciences Indian Institute of Science Education and Research Bhopal Bhopal Madhya Pradesh India
4 shared publications Ankur Bhardwaj
Department of Earth and Environmental Sciences Indian Institute of Science Education and Research Bhopal Bhopal Madhya Pradesh India
3 shared publications- Kajal Yadav
Department of Earth and Environmental Sciences Indian Institute of Science Education and Research Bhopal Bhopal India
3 shared publications Laxmi Prasad
3 shared publications
Latest Publications
- 25 January 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (2)
Hybrid Model Resolved Impacts of COVID‐19 Lockdowns on PM 2.5 Sources in Bhopal, India: Role of Meteorology, Secondary Inorganic Aerosols, and Crop Residue Burning
Air pollution in India is complex due to the multitude of sources and varying topography, rendering the interplay between meteorology and emission sources significant. To address this challenge, this work presents an integrated methodology for PM 2.5 source apportionment in Bhopal, central India, combining dispersion‐normalized positive matrix factorization (DN‐PMF) with a machine‐learning interpretability approach using Random Forest and SHAP (RF‐SHAP). DN‐PMF improves conventional source identification by incorporating air dilution effects, yielding refined source contributions for nine factors in Bhopal. Seasonal factor contributions peaked during periods with a lower boundary layer height, such as secondary sulfate during the winter season (21.3 μg m −3 , 31.7%). The COVID‐19 lockdowns, a quasi‐natural emissions reduction experiment, led to a decrease in aerosol contributions from industrial, residential and traffic‐related sources. However, during this period, crop residue burning was exposed as a major anthropogenic contributor, which together with unfavorable meteorology resulted in increased mean PM 2.5 (50.6 ± 24.3 μg m −3 ) during the lockdowns compared to the reference period (36.7 ± 9.7 μg m −3 ). Using RF‐SHAP the influence of meteorology and emission sources in driving secondary inorganic aerosol formation was examined. Secondary nitrate and residential fuel were identified as key contributors to exceedances of the Indian National Ambient Air Quality Standards (60 μg m −3 , 24‐hr average) at the study site. Integrating DN‐PMF with RF‐SHAP (driver analysis) enhanced source attribution by linking source contributions with their driving factors, establishing a framework for assessing pollution dynamics. This framework can help strengthen improved air quality initiatives in India, including the national Smart Cities Mission.
- 25 January 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (2)
Hybrid Model Resolved Impacts of COVID‐19 Lockdowns on PM 2.5 Sources in Bhopal, India: Role of Meteorology, Secondary Inorganic Aerosols, and Crop Residue Burning
Air pollution in India is complex due to the multitude of sources and varying topography, rendering the interplay between meteorology and emission sources significant. To address this challenge, this work presents an integrated methodology for PM 2.5 source apportionment in Bhopal, central India, combining dispersion‐normalized positive matrix factorization (DN‐PMF) with a machine‐learning interpretability approach using Random Forest and SHAP (RF‐SHAP). DN‐PMF improves conventional source identification by incorporating air dilution effects, yielding refined source contributions for nine factors in Bhopal. Seasonal factor contributions peaked during periods with a lower boundary layer height, such as secondary sulfate during the winter season (21.3 μg m −3 , 31.7%). The COVID‐19 lockdowns, a quasi‐natural emissions reduction experiment, led to a decrease in aerosol contributions from industrial, residential and traffic‐related sources. However, during this period, crop residue burning was exposed as a major anthropogenic contributor, which together with unfavorable meteorology resulted in increased mean PM 2.5 (50.6 ± 24.3 μg m −3 ) during the lockdowns compared to the reference period (36.7 ± 9.7 μg m −3 ). Using RF‐SHAP the influence of meteorology and emission sources in driving secondary inorganic aerosol formation was examined. Secondary nitrate and residential fuel were identified as key contributors to exceedances of the Indian National Ambient Air Quality Standards (60 μg m −3 , 24‐hr average) at the study site. Integrating DN‐PMF with RF‐SHAP (driver analysis) enhanced source attribution by linking source contributions with their driving factors, establishing a framework for assessing pollution dynamics. This framework can help strengthen improved air quality initiatives in India, including the national Smart Cities Mission.
- 8 November 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 130 (21)
Carbonaceous Aerosol Emissions From Residential Heating in India: Field Measurements of Emission Factors and Optical Properties
Residential activities are major contributors to global carbonaceous aerosol emissions, particularly in densely populated and low‐middle‐income countries such as India. Assessing the climatic impacts of these aerosols requires a detailed understanding of their optical properties and atmospheric abundance. Despite a strong understanding of cooking activities, residential water and space heating emissions in India remain highly uncertain. Using the field measurements, this study quantifies emission factors (EFs) and optical properties of emissions from water and space heating in India. The measured PM 2.5 , elemental carbon (EC), and organic carbon (OC) EFs for heating range between 2.2–20.7, 0.4–2.2, and 0.8–5.5 g kg −1 , respectively, are ∼2 fold higher than those for cooking. PM 2.5 EFs from firewood (20.7 ± 8.5 g kg −1 ) are larger than those during the crop residue (7.1 ± 5.7 g kg −1 ) and dung cake (17.4 ± 9.8 g kg −1 ) burning for water heating. These emissions exhibit significant absorption, corroborated by low values of single‐scattering albedo at 532 nm ranging from 0.17 to 0.96. A large absorption Angström exponent of 1.34–2.57 suggests the presence of brown carbon. The study estimates emissions of 1,239 (±264), 309 (±88), and 88 (±30) Gg yr −1 for PM 2.5 , OC, and EC, respectively, from residential heating activities in India. Spatially, emission patterns from heating differ from those for cooking, with high emissions in northern hilly regions, the Indo‐Gangetic plains, and western and southern India. The derived EFs, optical properties, and high‐resolution emissions enhance the understanding of aerosol climate impacts, offering insights for regional mitigation strategies for air pollution.
- 8 November 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 130 (21)
Carbonaceous Aerosol Emissions From Residential Heating in India: Field Measurements of Emission Factors and Optical Properties
Residential activities are major contributors to global carbonaceous aerosol emissions, particularly in densely populated and low‐middle‐income countries such as India. Assessing the climatic impacts of these aerosols requires a detailed understanding of their optical properties and atmospheric abundance. Despite a strong understanding of cooking activities, residential water and space heating emissions in India remain highly uncertain. Using the field measurements, this study quantifies emission factors (EFs) and optical properties of emissions from water and space heating in India. The measured PM 2.5 , elemental carbon (EC), and organic carbon (OC) EFs for heating range between 2.2–20.7, 0.4–2.2, and 0.8–5.5 g kg −1 , respectively, are ∼2 fold higher than those for cooking. PM 2.5 EFs from firewood (20.7 ± 8.5 g kg −1 ) are larger than those during the crop residue (7.1 ± 5.7 g kg −1 ) and dung cake (17.4 ± 9.8 g kg −1 ) burning for water heating. These emissions exhibit significant absorption, corroborated by low values of single‐scattering albedo at 532 nm ranging from 0.17 to 0.96. A large absorption Angström exponent of 1.34–2.57 suggests the presence of brown carbon. The study estimates emissions of 1,239 (±264), 309 (±88), and 88 (±30) Gg yr −1 for PM 2.5 , OC, and EC, respectively, from residential heating activities in India. Spatially, emission patterns from heating differ from those for cooking, with high emissions in northern hilly regions, the Indo‐Gangetic plains, and western and southern India. The derived EFs, optical properties, and high‐resolution emissions enhance the understanding of aerosol climate impacts, offering insights for regional mitigation strategies for air pollution.
- 15 July 2025
- Published by Elsevier in Environmental Pollution
- Vol. 383, 126823
Understanding PM-bound trace element solubilities: Controls, anthropogenic and natural sources
- 15 July 2025
- Published by Elsevier in Environmental Pollution
- Vol. 383, 126823
Understanding PM-bound trace element solubilities: Controls, anthropogenic and natural sources
- Open Access
- 15 May 2025
- Published by Copernicus GmbH
Advancing PM2.5 Source Apportionment through Dispersion Normalized PMF: A Comprehensive Study across India
The recent IPCC report highlights PM2.5 as one of the most important contributors to air pollution and its health impacts. Determining the sources of air pollution, quantifying their contributions to ambient pollutant levels, and characterizing their spatial and temporal patterns are all important steps in developing effective mitigation strategies (Hopke, 2016). Source apportionment studies, especially those using receptor models, are critical for this purpose. Of these, Positive Matrix Factorization (PMF) is a widely applied methodology. The current work evolves standard PMF (S-PMF) by Tapper and Paatero, 1994 based on the implementation of dispersion-normalized PMF (DN-PMF) suggested by Dai et al., 2020 that includes meteorologically-influenced enhancement towards increasing local source emissions resolution. DN-PMF preserves source information otherwise obscured by variable atmospheric conditions, yielding refined and distinct source profiles. This research investigates the spatial and seasonal variability of PM2.5 sources across three Indian cities—Bhopal (MSL: 486 m), Mesra (MSL: 517 m), and Mysuru (MSL: 759 m)—as part of the COALESCE network in 2019. A Multiple Seasonal-Trend Decomposition using LOESS (MSTL) was applied to mixed layer height time series to decompose into their daily, weekly, and trend components. Stationarity tests were performed using the Augmented Dickey-Fuller with a p-value
- 15 May 2025
- Published by Copernicus GmbH
Open AccessAdvancing PM2.5 Source Apportionment through Dispersion Normalized PMF: A Comprehensive Study across India
The recent IPCC report highlights PM2.5 as one of the most important contributors to air pollution and its health impacts. Determining the sources of air pollution, quantifying their contributions to ambient pollutant levels, and characterizing their spatial and temporal patterns are all important steps in developing effective mitigation strategies (Hopke, 2016). Source apportionment studies, especially those using receptor models, are critical for this purpose. Of these, Positive Matrix Factorization (PMF) is a widely applied methodology. The current work evolves standard PMF (S-PMF) by Tapper and Paatero, 1994 based on the implementation of dispersion-normalized PMF (DN-PMF) suggested by Dai et al., 2020 that includes meteorologically-influenced enhancement towards increasing local source emissions resolution. DN-PMF preserves source information otherwise obscured by variable atmospheric conditions, yielding refined and distinct source profiles. This research investigates the spatial and seasonal variability of PM2.5 sources across three Indian cities—Bhopal (MSL: 486 m), Mesra (MSL: 517 m), and Mysuru (MSL: 759 m)—as part of the COALESCE network in 2019. A Multiple Seasonal-Trend Decomposition using LOESS (MSTL) was applied to mixed layer height time series to decompose into their daily, weekly, and trend components. Stationarity tests were performed using the Augmented Dickey-Fuller with a p-value
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Chemical fractionation and potential health risks assessment of particulate matter bound heavy metals in Bhopal, Central India
Fine particulate matter, PM2.5 - bound toxic metals upon uptake by the human body, plants and animals by various mechanisms pose health risks. Additionally, they also play a role in altering the biogeochemical cycles of various species following dry/wet deposition onto soils, sediments and water bodies. Assessing the bioavailability of these metals using the total concentrations makes simplifying assumptions about the chemical states that these species are present in and the findings of risk assessments using such models/estimates are likely to have high uncertainties. Literature suggests that the sequential extraction procedure (SEP) is a versatile analytical method to examine the chemical fractionation of metals in particulate matter. Tessier’s SEP approach was used in this study to determine the extent of reactivity of metals in four fractions using specific solvents. Weekly composite of 24 hr integrated ambient PM2.5 samples (n=52+12 field blanks) collected onto Teflon filters, every other during 2019 were used. These samples were collected at a regionally representative location in Bhopal, central India, as part of the COALESCE ambient aerosol measurement campaign. Filter samples were utilized to quantify the metal fractions (K, V, Ti, Mn, Fe, Pb, Zn, and Cu) using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The internal check of the recovery of metals was determined by comparing the sum of metal fractions concentration with total metal concentration determined using a ED-XRF (Energy Dispersive X-Ray Fluorescence Spectrometer) on the same filters, prior to their leaching. The total sum of fractional concentrations were in good agreement with the bulk metal concentration (slope = 0.24-57.53, r2 = 0.92 -0.99) and the internal recovery ranged from 85%-110% for different analytes. Annual mean concentration of metal fractions of K, Ti, Pb and Zn were higher in the two bioavailable fractions including soluble, exchangeable fraction (F1) and carbonate, oxide and reducible fraction (F2) (43- 67 % of total concentration). Relatively higher proportions of Fe, Mn, and V were less bioavailable and were present in oxidizable fraction (F3) (40- 73 % of total concentration) indicating its high association with organic matter and inorganic sulfides. Cu was strongly bound to its silicate fraction and had its highest proportion present in the residual fraction (F4) (91 % of total concentration). As expected, application of the United States Environmental Protection Agency (USEPA) health risk assessment equations to the measured fractions revealed that the route of exposure for bioavailable metals was highest via the inhalation pathway, followed by dermal contact and ingestion. Total potential non-carcinogenic health risk indicator, the Hazard Quotients were below but close to the safe level of 1 for all bioavailable metal fractions. The cancer risk from bioavailable metal fractions were also within the USEPA acceptable limits for the three pathways. Overall, this work provides a database for bioavailable ambient PM2.5 heavy metals and evaluates potential health risks. In the future, this work will be extended to assess the impacts of these metals on perturbing the biochemical cycles of these species in this regional environment.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessChemical fractionation and potential health risks assessment of particulate matter bound heavy metals in Bhopal, Central India
Fine particulate matter, PM2.5 - bound toxic metals upon uptake by the human body, plants and animals by various mechanisms pose health risks. Additionally, they also play a role in altering the biogeochemical cycles of various species following dry/wet deposition onto soils, sediments and water bodies. Assessing the bioavailability of these metals using the total concentrations makes simplifying assumptions about the chemical states that these species are present in and the findings of risk assessments using such models/estimates are likely to have high uncertainties. Literature suggests that the sequential extraction procedure (SEP) is a versatile analytical method to examine the chemical fractionation of metals in particulate matter. Tessier’s SEP approach was used in this study to determine the extent of reactivity of metals in four fractions using specific solvents. Weekly composite of 24 hr integrated ambient PM2.5 samples (n=52+12 field blanks) collected onto Teflon filters, every other during 2019 were used. These samples were collected at a regionally representative location in Bhopal, central India, as part of the COALESCE ambient aerosol measurement campaign. Filter samples were utilized to quantify the metal fractions (K, V, Ti, Mn, Fe, Pb, Zn, and Cu) using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The internal check of the recovery of metals was determined by comparing the sum of metal fractions concentration with total metal concentration determined using a ED-XRF (Energy Dispersive X-Ray Fluorescence Spectrometer) on the same filters, prior to their leaching. The total sum of fractional concentrations were in good agreement with the bulk metal concentration (slope = 0.24-57.53, r2 = 0.92 -0.99) and the internal recovery ranged from 85%-110% for different analytes. Annual mean concentration of metal fractions of K, Ti, Pb and Zn were higher in the two bioavailable fractions including soluble, exchangeable fraction (F1) and carbonate, oxide and reducible fraction (F2) (43- 67 % of total concentration). Relatively higher proportions of Fe, Mn, and V were less bioavailable and were present in oxidizable fraction (F3) (40- 73 % of total concentration) indicating its high association with organic matter and inorganic sulfides. Cu was strongly bound to its silicate fraction and had its highest proportion present in the residual fraction (F4) (91 % of total concentration). As expected, application of the United States Environmental Protection Agency (USEPA) health risk assessment equations to the measured fractions revealed that the route of exposure for bioavailable metals was highest via the inhalation pathway, followed by dermal contact and ingestion. Total potential non-carcinogenic health risk indicator, the Hazard Quotients were below but close to the safe level of 1 for all bioavailable metal fractions. The cancer risk from bioavailable metal fractions were also within the USEPA acceptable limits for the three pathways. Overall, this work provides a database for bioavailable ambient PM2.5 heavy metals and evaluates potential health risks. In the future, this work will be extended to assess the impacts of these metals on perturbing the biochemical cycles of these species in this regional environment.
- 20 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (14)
Drivers of PM2.5 Episodes and Exceedance in India: A Synthesis From the COALESCE Network
Emission sources influencing high particulate air pollution levels and related mortality in India have been studied earlier on country‐wide and sub‐national scales. Here, we use novel data sets of emissions (for 2019) and observations created under the Carbonaceous Aerosol Emissions, Source Apportionment, and Climate Impacts network in India (Venkataraman et al., 2020, https://doi.org/10.1175/bams‐d‐19‐0030.1) in WRF‐Chem simulations to evaluate drivers of high PM2.5 levels during episodes and in airsheds with different pollution levels. We identify airsheds in “extreme” (110–140 μg/m3), “severe” (80–110 μg/m3) and “significant” (40–80 μg/m3) exceedance of the Indian annual ambient air quality standard (National Ambient Air Quality Standards [NAAQS]) of 40 μg/m3 for PM2.5. We find that primary organic matter and anthropogenic mineral matter (largely coal fly‐ash) drive high PM2.5 levels, both annually and during high PM2.5 episodes. PM2.5 episodes are driven by organic aerosol in north India (Mohali) in wintertime but are additionally influenced by mineral matter and secondary inorganics in central (Bhopal), south India (Mysuru) and eastern India (Shyamnagar). Across airsheds in exceedance of the NAAQS and during high PM2.5 episodes, primary PM2.5 emissions arise largely from the residential sector (50%–75%). Formal sector emissions (industry, thermal power and transport; 40%–55%) drive airshed and episode scale PM2.5 exceedance in northern and eastern India. Agricultural residue burning emissions predominate (50%–75%) on episode scales, both in northern and central India, but not on annual scales. Interestingly, residential sector emissions strongly influence (60%–90%) airsheds in compliance with the NAAQS (annual mean PM2.5 < 40 μg/m3), implying the need for modern residential energy transitions for the reduction of ambient air pollution across India.
- 20 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (14)
Drivers of PM2.5 Episodes and Exceedance in India: A Synthesis From the COALESCE Network
Emission sources influencing high particulate air pollution levels and related mortality in India have been studied earlier on country‐wide and sub‐national scales. Here, we use novel data sets of emissions (for 2019) and observations created under the Carbonaceous Aerosol Emissions, Source Apportionment, and Climate Impacts network in India (Venkataraman et al., 2020, https://doi.org/10.1175/bams‐d‐19‐0030.1) in WRF‐Chem simulations to evaluate drivers of high PM2.5 levels during episodes and in airsheds with different pollution levels. We identify airsheds in “extreme” (110–140 μg/m3), “severe” (80–110 μg/m3) and “significant” (40–80 μg/m3) exceedance of the Indian annual ambient air quality standard (National Ambient Air Quality Standards [NAAQS]) of 40 μg/m3 for PM2.5. We find that primary organic matter and anthropogenic mineral matter (largely coal fly‐ash) drive high PM2.5 levels, both annually and during high PM2.5 episodes. PM2.5 episodes are driven by organic aerosol in north India (Mohali) in wintertime but are additionally influenced by mineral matter and secondary inorganics in central (Bhopal), south India (Mysuru) and eastern India (Shyamnagar). Across airsheds in exceedance of the NAAQS and during high PM2.5 episodes, primary PM2.5 emissions arise largely from the residential sector (50%–75%). Formal sector emissions (industry, thermal power and transport; 40%–55%) drive airshed and episode scale PM2.5 exceedance in northern and eastern India. Agricultural residue burning emissions predominate (50%–75%) on episode scales, both in northern and central India, but not on annual scales. Interestingly, residential sector emissions strongly influence (60%–90%) airsheds in compliance with the NAAQS (annual mean PM2.5 < 40 μg/m3), implying the need for modern residential energy transitions for the reduction of ambient air pollution across India.
- 24 April 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (8)
Spatio‐Temporal Trends of the Relationships Between Surface PM2.5 and Its Chemical Constituents Across Three COALESCE Network Locations in India: A Mass Closure Investigation
COALESCE, a collaborative network studying the impacts of carbonaceous aerosols, measured PM2.5 mass and its constituents at several regionally representative sites in India. This study reconciles the reconstructed mass (RCM) from PM2.5 chemical constituents with gravimetric PM2.5 mass measured during 2019 at three COALESCE sites (Bhopal, Mesra, and Mysuru). To evaluate the extent of mass closure, the spatiotemporal variability of organic matter/organic carbon (OM/OC), filter sampling artifacts of OC, nitrate, and aerosol liquid water (ALW) were assessed. The annual loss of total particulate OC from Teflon filters varied across Bhopal (0.46–1.35 μg m−3), Mesra (0.30–0.92 μg m−3), and Mysuru (0.16–0.68 μg m−3). Likewise, the range of nitrate volatilization was 0.7–2.7 μg m−3 at Bhopal, 0.5–2 μg m−3 at Mesra, and 1.3–2.2 μg m−3 at Mysuru. Also, the range of ALW mass was 2.6–6.8 μg m−3 at Bhopal, 3.2–9.5 μg m−3 at Mesra, and 0.8–3.8 μg m−3 at Mysuru. Seasonality was observed in the value of OM/OC with an increase during the pre‐monsoon season at all sites viz., Bhopal (2.20), Mesra (1.61), and Mysuru (2.02) compared to their annual averages, suggesting enhanced contribution of secondary organics to OC. The method developed for estimating RCM in this study resulted in better mass closure compared to using conventional RCM algorithms. Overall, this study provides a robust data validation strategy and India‐specific species coefficients for use in the RCM algorithm. The outcomes of this study can guide regional aerosol sampling, chemical analyses, and model–measurement reconciliation efforts.
- 24 April 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 129 (8)
Spatio‐Temporal Trends of the Relationships Between Surface PM2.5 and Its Chemical Constituents Across Three COALESCE Network Locations in India: A Mass Closure Investigation
COALESCE, a collaborative network studying the impacts of carbonaceous aerosols, measured PM2.5 mass and its constituents at several regionally representative sites in India. This study reconciles the reconstructed mass (RCM) from PM2.5 chemical constituents with gravimetric PM2.5 mass measured during 2019 at three COALESCE sites (Bhopal, Mesra, and Mysuru). To evaluate the extent of mass closure, the spatiotemporal variability of organic matter/organic carbon (OM/OC), filter sampling artifacts of OC, nitrate, and aerosol liquid water (ALW) were assessed. The annual loss of total particulate OC from Teflon filters varied across Bhopal (0.46–1.35 μg m−3), Mesra (0.30–0.92 μg m−3), and Mysuru (0.16–0.68 μg m−3). Likewise, the range of nitrate volatilization was 0.7–2.7 μg m−3 at Bhopal, 0.5–2 μg m−3 at Mesra, and 1.3–2.2 μg m−3 at Mysuru. Also, the range of ALW mass was 2.6–6.8 μg m−3 at Bhopal, 3.2–9.5 μg m−3 at Mesra, and 0.8–3.8 μg m−3 at Mysuru. Seasonality was observed in the value of OM/OC with an increase during the pre‐monsoon season at all sites viz., Bhopal (2.20), Mesra (1.61), and Mysuru (2.02) compared to their annual averages, suggesting enhanced contribution of secondary organics to OC. The method developed for estimating RCM in this study resulted in better mass closure compared to using conventional RCM algorithms. Overall, this study provides a robust data validation strategy and India‐specific species coefficients for use in the RCM algorithm. The outcomes of this study can guide regional aerosol sampling, chemical analyses, and model–measurement reconciliation efforts.
- 2 May 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 341, 118055
Reassessing the availability of crop residue as a bioenergy resource in India: A field-survey based study
- 2 May 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 341, 118055
Reassessing the availability of crop residue as a bioenergy resource in India: A field-survey based study
- 24 February 2023
- Published by Elsevier in Chemosphere
- Vol. 324, 138203
Pollution characteristics and ecological risks of trace elements in PM2.5 over three COALESCE network sites - Bhopal, Mesra, and Mysuru, India
- 24 February 2023
- Published by Elsevier in Chemosphere
- Vol. 324, 138203
Pollution characteristics and ecological risks of trace elements in PM2.5 over three COALESCE network sites - Bhopal, Mesra, and Mysuru, India