Jaime Chacana-Olivares
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jaime Chacana-Olivares has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Camila Mery-Araya
Chemical and Environmental Engineering Department, Universidad Técnica Federico Santa María, Avenida España 1680, Valparaíso 2340000, Chile
2 shared publications - Paula Guerra
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, San Joaquín, Santiago, Chile
2 shared publications - Rodrigo Poblete
Universidad Católica del Norte, Facultad de Ciencias del Mar, Escuela de Prevención de Riesgos y Medioambiente, Coquimbo, Chile
2 shared publications - Adrian Enrique Ortiz Rojas
Department of Chemical and Environmental Engineering, Universidad Técnica Federico Santa María, Valparaíso, 2340000, Chile
1 shared publication Begoña Peceño
Centro Lithium I + D + i, Universidad Católica del Norte, Antofagasta, Chile
1 shared publication- Christopher L. Colbert
Department of Chemistry and Biochemistry, North Dakota State University, Fargo, ND 58108, USA
1 shared publication
Latest Publications
- Open Access
- 15 May 2026
- Published by IWA Publishing in Water Science & Technology
- Vol. 93 (12) , 1784-1801
Effect of cooling and cover material on the performance of a solar humidification-dehumidification system used for brine concentration
As a response to the growing global demand for sustainable water recovery technologies, this study evaluates a solar-driven humidification-dehumidification system for brine concentration and water recovery. The system integrates two external cover materials – polycarbonate and acrylic – with different cooling configurations: copper tube heat exchangers, thermoelectric Peltier plates, and their combination. A real reverse osmosis brine with total dissolved solids of 73.6 g/L was used as the feed solution. The performance of the system was assessed through the gained output ratio (GOR) and condensation performance (CP). The highest GOR (5.55) and CP (1.16) were obtained using acrylic covers and a combined copper tube–Peltier configuration. The crystallized salts were rich in minerals of economic and industrial importance. In this work, the feasibility of recovering valuable minerals and water has been demonstrated at a pilot-plant scale, which is of particular interest in areas with severe water shortages. This offers potential for resource recovery in the context of zero liquid discharge, contributing thus to circular economy strategies in desalination, and offering an alternative that allows brine to be discharged into natural waters, thus avoiding its potential environmental impact.
- 15 May 2026
- Published by IWA Publishing in Water Science & Technology
- Vol. 93 (12) , 1784-1801
Open AccessEffect of cooling and cover material on the performance of a solar humidification-dehumidification system used for brine concentration
As a response to the growing global demand for sustainable water recovery technologies, this study evaluates a solar-driven humidification-dehumidification system for brine concentration and water recovery. The system integrates two external cover materials – polycarbonate and acrylic – with different cooling configurations: copper tube heat exchangers, thermoelectric Peltier plates, and their combination. A real reverse osmosis brine with total dissolved solids of 73.6 g/L was used as the feed solution. The performance of the system was assessed through the gained output ratio (GOR) and condensation performance (CP). The highest GOR (5.55) and CP (1.16) were obtained using acrylic covers and a combined copper tube–Peltier configuration. The crystallized salts were rich in minerals of economic and industrial importance. In this work, the feasibility of recovering valuable minerals and water has been demonstrated at a pilot-plant scale, which is of particular interest in areas with severe water shortages. This offers potential for resource recovery in the context of zero liquid discharge, contributing thus to circular economy strategies in desalination, and offering an alternative that allows brine to be discharged into natural waters, thus avoiding its potential environmental impact.
- Open Access
- 13 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 11178
Transboundary and National Environmental Impacts of Seawater Desalination in Central Chile: An LCA-Based Analysis Across Energy Transition Scenarios
The environmental impact of seawater reverse osmosis desalination in central Chile was assessed using Life Cycle Assessment (LCA) with the EcoInvent database to address the region’s high water stress. The study analyzed the operational phase using 1 m3 of product water as the functional unit, considering power demand, chemicals, and membranes across eight scenarios that varied energy matrix composition, membrane lifespan, water use, and seawater source. Eighteen environmental indicators were evaluated using the ReCiPe 2016 Midpoint (H) method. Results revealed that eight impact indicators were primarily national in origin, while ten exhibited transboundary characteristics. Power demand was the dominant contributor, exceeding 75% of impacts in 17 of 18 categories. A 25% power increase raised environmental impacts by an average of +21.5%, while the projected 2050 renewable energy scenario showed substantial reductions averaging −43.0%. This demonstrates that power consumption is the principal driver of environmental impacts, underscoring the importance of energy-efficiency measures and integration of Non-Conventional Renewable Energies (NCRE), particularly as fossil-based sources constitute the main contributors to environmental burdens at both national and transboundary scales.
- 13 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 11178
Open AccessTransboundary and National Environmental Impacts of Seawater Desalination in Central Chile: An LCA-Based Analysis Across Energy Transition Scenarios
The environmental impact of seawater reverse osmosis desalination in central Chile was assessed using Life Cycle Assessment (LCA) with the EcoInvent database to address the region’s high water stress. The study analyzed the operational phase using 1 m3 of product water as the functional unit, considering power demand, chemicals, and membranes across eight scenarios that varied energy matrix composition, membrane lifespan, water use, and seawater source. Eighteen environmental indicators were evaluated using the ReCiPe 2016 Midpoint (H) method. Results revealed that eight impact indicators were primarily national in origin, while ten exhibited transboundary characteristics. Power demand was the dominant contributor, exceeding 75% of impacts in 17 of 18 categories. A 25% power increase raised environmental impacts by an average of +21.5%, while the projected 2050 renewable energy scenario showed substantial reductions averaging −43.0%. This demonstrates that power consumption is the principal driver of environmental impacts, underscoring the importance of energy-efficiency measures and integration of Non-Conventional Renewable Energies (NCRE), particularly as fossil-based sources constitute the main contributors to environmental burdens at both national and transboundary scales.
- Top Cited PapersOpen Access
- 7 November 2025
- Published by Springer Nature in npj Materials Sustainability
- Vol. 3 (1) , 1-10
Lithium-ion battery recycling: a perspective on key challenges and opportunities
- 7 November 2025
- Published by Springer Nature in npj Materials Sustainability
- Vol. 3 (1) , 1-10
Top Cited PapersOpen AccessLithium-ion battery recycling: a perspective on key challenges and opportunities
- 25 December 2024
- Published by Springer Nature
- p. 429-441
Water, Cities, and Industries in an Arid Zone: The Case Study of Antofagasta, Chile
- 25 December 2024
- Published by Springer Nature
- p. 429-441
Water, Cities, and Industries in an Arid Zone: The Case Study of Antofagasta, Chile
- Open Access
Mitigation of Membrane Fouling in Membrane Bioreactors Using Granular and Powdered Activated Carbon: An Experimental Study
This experimental study explores the mitigation of membrane fouling in membrane bioreactors (MBRs) through the combined use of granular activated carbon (GAC) and powdered activated carbon (PAC). The research assesses the impact of these materials on the fouling resistance, critical flux, and permeate quality using various mixed liquor suspended solids concentrations and carbon dosages. The results indicate that the GAC-PAC combination significantly reduces the total filtration resistance, particularly the cake layer resistance, by 11.7% to 13.6% compared to setups without activated carbon or with the individual carbon types. The study also reveals that this combination decreased the fouling rate by 15% to 24% at critical flux steps, demonstrating substantial improvements in fouling mitigation and operational efficiency. Furthermore, the GAC-PAC combination, which produces an adsorption process, enhances the permeate quality, achieving the near-complete removal of organic matter, total nitrogen, and turbidity, with total phosphorus removal reaching 99%. These findings demonstrate that the combined use of GAC and PAC not only reduces membrane fouling but also improves the overall MBR performance, making it a viable strategy for enhancing the efficiency of wastewater treatment processes.
Open AccessMitigation of Membrane Fouling in Membrane Bioreactors Using Granular and Powdered Activated Carbon: An Experimental Study
This experimental study explores the mitigation of membrane fouling in membrane bioreactors (MBRs) through the combined use of granular activated carbon (GAC) and powdered activated carbon (PAC). The research assesses the impact of these materials on the fouling resistance, critical flux, and permeate quality using various mixed liquor suspended solids concentrations and carbon dosages. The results indicate that the GAC-PAC combination significantly reduces the total filtration resistance, particularly the cake layer resistance, by 11.7% to 13.6% compared to setups without activated carbon or with the individual carbon types. The study also reveals that this combination decreased the fouling rate by 15% to 24% at critical flux steps, demonstrating substantial improvements in fouling mitigation and operational efficiency. Furthermore, the GAC-PAC combination, which produces an adsorption process, enhances the permeate quality, achieving the near-complete removal of organic matter, total nitrogen, and turbidity, with total phosphorus removal reaching 99%. These findings demonstrate that the combined use of GAC and PAC not only reduces membrane fouling but also improves the overall MBR performance, making it a viable strategy for enhancing the efficiency of wastewater treatment processes.
- 24 February 2023
- Published by Elsevier in Chemosphere
- Vol. 323, 138246
Blocking bacterial appendage attachment to wastewater treatment membranes using anti-adhesins
- 24 February 2023
- Published by Elsevier in Chemosphere
- Vol. 323, 138246
Blocking bacterial appendage attachment to wastewater treatment membranes using anti-adhesins