GLGuangyun Li

Guangyun Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guangyun Li has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Metrology-Driven Self-Calibration Framework for Terrestrial Laser Scanner Sensor Systems

    by Honglei Yuan, Guangyun Li, Li Wang, Xiangfei Li

    Terrestrial laser scanning (TLS), also referred to as terrestrial LiDAR, has become an essential close-range remote sensing technique for high-precision engineering surveying, deformation monitoring, industrial inspection, and cultural heritage documentation. The geometric reliability of TLS point clouds strongly depends on the effective compensation of instrumental systematic errors through in situ self-calibration. However, conventional target-based self-calibration often suffers from strong coupling between calibration parameters and exterior orientation parameters, whereas recently developed coplanarity-constrained formulations generally require highly redundant target networks, limiting their field efficiency. To address this limitation, this study proposes a variance inflation factor (VIF)-driven minimal network design strategy for efficient in situ geometric self-calibration of TLS systems. Unlike the commonly used geometric dilution of precision, VIF provides a dimensionless statistical alternative that effectively resolves the dimensional inconsistency inherent in traditional GDOP when handling mixed angular and distance parameters. A differential evolution algorithm is employed to search for hybrid calibration networks that minimize parameter coupling while preserving the physical interpretability of the National Institute of Standards and Technology (NIST) 10-parameter instrumental error model. Five digital twin simulation experiments and a physical validation experiment using a Faro Focus 350 scanner were conducted to evaluate the proposed method. The results show that the optimized network substantially reduces the number of required targets while maintaining high calibration accuracy. The final configuration, which combines VIF-optimized target placement with a dual-station height-difference constraint, reduces the condition number of the normal equations to below 60 and yields a mean system VIF close to 10. The maximum parameter correlation coefficient among the key calibration parameters is constrained to approximately 0.75, indicating near-optimal parameter decoupling under the limited field-of-view geometry of the instrument. These findings demonstrate that the proposed VIF-driven network design provides a highly effective strategy for field-efficient TLS self-calibration and improves the geometric reliability of terrestrial LiDAR point clouds in high-precision remote sensing applications.

  • Open Access

    RI-DVP: A Physics–Geometry Dual-Driven Framework for Static Map Construction in Sparse LiDAR Scenarios

    by Xiaokai Li, Li Wang, Haolong Luo, Guangyun Li

    High-fidelity static map construction is essential for reliable autonomous navigation, yet dynamic environments introduce severe artifacts caused by moving objects (also referred to as dynamic artifacts) in accumulated maps. While geometry-based methods perform well on dense point clouds, their performance notably degrades on sparse 16-beam LiDAR due to the “Sparsity Trap”: dynamic objects are frequently missed by ray-based geometry, and purely geometric cues fail in radiometrically ambiguous scenarios. To address this, we propose RI-DVP, a physics–geometry dual-driven framework. Unlike conventional approaches, RI-DVP first performs a physics-inspired radiometric normalization that compensates for range attenuation and incidence-angle effects to establish a consistent signal baseline. Subsequently, a Dual-Residual Aggressive Removal (DRAR) module jointly exploits geometric residuals—bounded by a range-dependent spatial uncertainty envelope—and calibrated intensity residuals to detect geometrically indistinguishable objects. To balance recall and precision, a Hierarchical Static Reversion strategy (HSR) employs two-stage recovery to retrieve large-scale structures and correct fine-grained artifacts via topology-based adhesion reasoning. Experiments on SemanticKITTI and custom sparse datasets demonstrate that RI-DVP outperforms state-of-the-art geometric baselines, improving Dynamic Accuracy by over 36 percentage points in sparse scanning scenarios using a VLP-16 LiDAR sensor (Velodyne Acoustics, Inc., Morgan Hill, CA, USA) compared to baselines that fail under the sparsity trap while achieving real-time performance at approximately 15.3 Hz.


  • Iridium NEXT/Orbcomm combined doppler positioning using semi-parametric regression method with additional system parameters

    by Wenlong Zhou, Guangyun Li, Mingjian Chen, Yang Xie, Jiashu Yu, Yangjun Gao, Ancheng Wang, Shuai Tong


  • MR 2 SLAM: Multi-Robot Monocular Resilient SLAM for Ill-Conditioned Problems

    by Zidi Yang, Jiansheng Li, Guangyun Li, Huakai Zhao, Ancheng Wang

    Monocular visual-inertial simultaneous localization and mapping (SLAM) estimates the 3D positions of landmarks through triangulation of inter-frame tracked features. However, due to limited parallax between frames and highly consistent camera motion, the triangulation process frequently becomes ill-conditioned. To address this, we propose MR2SLAM, a Multi-Robot Monocular Resilient SLAM for ill-conditioned problems. MR2SLAM leverages collective observations of feature points from multiple robots to perform joint triangulation, benefiting from diverse viewpoints, complex epipolar geometry, and improved robustness against ill-conditioning. Furthermore, to fully leverage multi-robot collaborative observations and mitigate the impact of visual data degradation in any single robot on the overall system, MR2SLAM resiliently adjusts the weights between map points generated through multi-robot collaboration and those from individual robots in back-end optimization. This is achieved by updating the information matrix using reprojection errors. We evaluate our method on a multi-vehicle dataset collected in underground environments. Results show that, compared to VINS-Mono, the proposed method reduces the average condition number by 92.56% and improves the average localization accuracy by 19.68%.


  • Helmert-VCE-aided weighted method for fusing GNSS data and IRI-2020 model virtual observations to model ionosphere TEC in the Arctic

    by Yang Shen, Guangyun Li, Mingjian Chen, Bingyue You, Li Wang, Yuxing Li, Wenlong Zhou, Jiashu Yu, Weifeng Hao

    Using the vertical total electronic content (VTEC) value of the empirical ionospheric model to compensate for the deficiency of ground-based Global Navigation Satellite System (GNSS) observation is an effective method to improve the accuracy and reliability of ionospheric modeling in the ocean and polar regions lacking ground-based GNSS observation stations. In the research of using empirical model virtual observations to enhance GNSS for ionospheric modeling, the empirical model error is usually taken as a fixed value for empirical weight determination when the empirical model and GNSS VTEC are weighted, and the variation of empirical model error with time and space is ignored. In this paper, a GNSS ionospheric modeling method enhanced by IRI-2020 virtual observations based on Helmert variance component estimation is proposed. The weights of GNSS and IRI model VTEC are dynamically determined by Helmert variance component estimation. The models obtained from the GNSS ionospheric modeling enhanced by IRI-2020 model virtual observations using empirical weighting and Helmert variance component weighting methods are defined as GIP and GIH respectively. Taking the Arctic region as an example, the FY-3 VTEC is used as reference value to verify the modeling results from the 79th to 90th days of 2023. The results show that the MAE, RMS and STD of the GIH model are all smaller than those of the GIP, decreasing by 0.20 TECU, 0.30 TECU and 0.24 TECU respectively, which indicates that after weighting with the Helmert variance component estimation, the accuracy of ionospheric modeling in the Arctic can be improved. The analysis of ionosphere TEC accuracy at different longitudes, latitudes and local times shows that GIH has a greater improvement in accuracy compared to GIP in the data blank areas of longitude 60°E-180°E, latitude greater than 84°, and local time 12 -18.

  • Open Access

    Research on the Improved ICP Algorithm for LiDAR Point Cloud Registration

    by Honglei Yuan, Guangyun Li, Li Wang, Xiangfei Li

    Over three decades of research has been undertaken on point cloud registration algorithms, resulting in mature theoretical frameworks and methodologies. However, among the numerous registration techniques used, the impact of point cloud scanning quality on registration outcomes has rarely been addressed. In most engineering and industrial measurement applications, the accuracy and density of LiDAR point clouds are highly dependent on laser scanners, leading to significant variability that critically affects registration quality. Key factors influencing point cloud accuracy include scanning distance, incidence angle, and the surface characteristics of the target. Notably, in short-range scanning scenarios, incidence angle emerges as the dominant error source. Building on this insight, this study systematically investigates the relationship between scanning incidence angles and point cloud quality. We propose an incident-angle-dependent weighting function for point cloud observations, and further develop an improved weighted Iterative Closest Point (ICP) registration algorithm. Experimental results demonstrate that the proposed method achieves approximately 30% higher registration accuracy compared to traditional ICP algorithms and a 10% improvement over Faro SCENE’s proprietary solution.


  • Differential Carrier Phase Positioning With System Error Corrections Based on Orbcomm Signals of Opportunity

    by Yang Xie, Guangyun Li, Wenlong Zhou, Mingjian Chen, Jiashu Yu

    Multiple epoch stationary positioning can be achieved using signals of opportunity (SOPs) from low-earth-orbit (LEO) satellites when GNSS is unavailable. Concurrently, the two-line element (TLE) and the simplified general perturbation 4 (SGP4) model can provide satellite positions with km-level errors for non-navigational LEO constellations. Although differential positioning can mitigate some system errors, long baselines reduce their temporal and spatial correlation, resulting in large residual system errors in differential measurements, which leads to inaccurate positioning results. First, based on SOPs of Orbcomm, we conduct a comprehensive analysis of the effect of major system errors on the differential range residual. Second, we introduce a polynomial fitting algorithm to obtain ionospheric delay corrections (IDC) using dual-frequency carrier phase measurements. Third, an adaptive regularized least squares (ARLS) algorithm is proposed to estimate the satellite state and provide satellite position corrections (SPC). Finally, differential carrier phase positioning utilizing IDC and SPC is implemented in real time. Experimental results demonstrate that the proposed algorithms can effectively smooth the variation of ionospheric delay over epochs and estimate position errors of Orbcomm satellites. Using two Orbcomm satellites, a final three-dimensional (3D) positioning error of less than 5 m and a 3D positioning root mean squared error (RMSE) of 10.8 m are achieved for the long-baseline scenario. Furthermore, the proposed differential positioning algorithm shows good robustness to the age of TLE files and does not require external ionospheric correction, enhancing its practicality and real-time performance.


  • Open Access

    Visual-inertial navigation assisted by a single UWB anchor with an unknown position

    by Haolong Luo, Danping Zou, Jiansheng Li, Ancheng Wang, Li Wang, Zidi Yang, Guangyun Li

    Navigation technology, which integrates vision, Inertial Measurement Unit (IMU), and Ultra-Wideband (UWB) sensors in GNSS-denied environments has gained a significant attention. However, inaccurate estimation of UWB anchor positions and improper sensor weighting among heterogeneous sensors significantly impairs the positioning accuracy and robustness of Visual-Inertial-UWB (VIU) systems. To accurately and rapidly estimate the UWB anchor positions, we employed the robust ridge nonlinear least-squares method to improve the accuracy and reliability of the estimated UWB anchor position. Additionally, we proposed a simple and effective method to assess the accuracy of the UWB anchor position using the geometric dilution precision principle, which facilitates rapid and accurate estimation of the UWB anchor position. Furthermore, we designed a method to calculate the estimated UWB anchor position error in real-world settings. Finally, we proposed a nonlinear optimization method with dynamically adaptive weighting based on the HELMERT variance component estimation principle, which assigns appropriate weights to heterogeneous sensors. To validate the feasibility and effectiveness of the proposed method, comprehensive simulations and real-world experiments were conducted. First, using Monte Carlo simulation and real-world experiments, we validated the effectiveness of the proposed methods for UWB anchor position and its accuracy estimation. Then, we conducted ablation experiments utilizing the open-source VIRAL and real-world datasets. The experimental results demonstrate that the proposed method exhibits superior positioning accuracy and robustness in contrast to the open-source VINS-MONO and VIR-SLAM methods.


  • Carrier phase tracking and positioning algorithm with additional system parameters based on Orbcomm signals

    by Yang Xie, Guangyun Li, Honglei Qin, Chao Zhao, Mingjian Chen, Wenlong Zhou


  • Top Cited Papers

    Detection of Spoofing Attacks on Global Navigation Satellite Systems Using Kolmogorov–Smirnov Test-Based Signal Quality Monitoring Method

    by Wenlong Zhou, Zhiwei Lv, Guangyun Li, Bo Jiao, Wenbo Wu

    Signal Quality Monitoring (SQM) has been widely used as a simple and effective means to detect spoofing attacks on Global Navigation Satellite Systems (GNSS). However, the inherent disadvantages of SQM techniques such as low detection accuracy and poor robustness necessitate the study of new methods. We propose an innovative enhanced SQM method based on the application of a statistical test, known as the Kolmogorov–Smirnov (KS) test, applied to monitor the correlator output of the GNSS receiver to identify the subtle distortions of the correlation function. The simulation results show that the KS test-based method is suitable for detecting spoofing attacks with different power advantages. Compared with seven existing typical spoofing detection methods in applied cases 2, 3, and 7 from the Texas Spoofing Test Battery datasets, the proposed method achieved a higher than 95% detection rate at a false alarm rate of 10%, which is 27.69%, 10.36%, and 6.43% higher than that of the detection method based on weighted second-order central moments, respectively, and the spoofed alarm time delay and computation time are shortened. The proposed method overcomes the performance loss of existing SQM methods and provides excellent detection accuracy and effectiveness, thus, can be used as a potential reliable application solution against spoofing attacks with differing frequency lock modes and power superiorities.