Floreana Miesen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Floreana Miesen has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Stuart Nicholas Lane
Institute of Earth Surface Dynamics University of Lausanne Lausanne Switzerland
11 shared publications - Davide Mancini
Institute of Earth Surface Dynamics (IDYST) Université de Lausanne Lausanne Switzerland
10 shared publications Brian De Grenus
Institute of Earth Surface Dynamics, University of Lausanne, Lausanne, Switzerland
9 shared publications- James Matthew Thornton
Mountain Research Initiative, c/o University of Bern, Switzerland
9 shared publications - Judith Eeckman
Institute of Geography and Sustainability, University of Lausanne, Lausanne, Switzerland
9 shared publications - Matt Jenkin
Institute of Earth Surface Dynamics (IDYST) Université de Lausanne Lausanne Switzerland
9 shared publications
Latest Publications
- Open Access
- 26 June 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (13)
Coarse Sediment Transport in a Near‐Terminus Subglacial Channel
We present the first large‐sample, spatially resolved measurements of coarse sediment transport within a subglacial meltwater channel. We released 324 radio‐tagged pebbles into a near‐terminus channel of Glacier d’Otemma, Switzerland, and monitored their positions through 10–50 m of ice during the mid to late melt season. Concurrently, proglacial discharge and bedload flux were monitored at the terminus. Particles moved infrequently: more than half never moved, most remained near their release location, and only 25% were exported to the proglacial river. Particle export was more consistently related to recent movement history than to proglacial discharge or bedload export, whereas virtual velocity showed no consistent relationship with these predictors. These observations indicate substantial coarse sediment retention within an active near‐terminus subglacial channel, potentially weakening short‐term correspondence between coarse subglacial transport and proglacial sediment export.
- 26 June 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (13)
Open AccessCoarse Sediment Transport in a Near‐Terminus Subglacial Channel
We present the first large‐sample, spatially resolved measurements of coarse sediment transport within a subglacial meltwater channel. We released 324 radio‐tagged pebbles into a near‐terminus channel of Glacier d’Otemma, Switzerland, and monitored their positions through 10–50 m of ice during the mid to late melt season. Concurrently, proglacial discharge and bedload flux were monitored at the terminus. Particles moved infrequently: more than half never moved, most remained near their release location, and only 25% were exported to the proglacial river. Particle export was more consistently related to recent movement history than to proglacial discharge or bedload export, whereas virtual velocity showed no consistent relationship with these predictors. These observations indicate substantial coarse sediment retention within an active near‐terminus subglacial channel, potentially weakening short‐term correspondence between coarse subglacial transport and proglacial sediment export.
- Open Access
- 4 September 2025
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 29 (17) , 4093-4107
Multi-instrumental monitoring of snowmelt infiltration in Vallon de Nant, Swiss Alps
To gain a deeper understanding of the dynamics of the contribution of snowmelt to mountainous water cycles, it is necessary to better understand the processes controlling the infiltration of snowmelt into mountainous soils. This research uniquely combines snowmelt rate data with soil moisture dynamics, providing a comprehensive 3-year dataset. The integration of multiple measurement techniques and the estimation of the snowmelt rate through the measurement of snow resistivity offer a new perspective on snowmelt infiltration processes. The study area is located in Vallon de Nant, Swiss Alps. Measurement points are distributed at mid- to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt infiltration dynamics in the study area. Results indicate that, although melt rates are considerably lower than soil saturated hydraulic conductivity values, the response times of shallow soil moisture and stream discharge to melt events are fast (from 2 to 5 h). At the point measurement locations, snowmelt hardly infiltrates below 30 cm. These findings highlight how the fast recession of soil moisture peaks to snowmelt may limit the capacity of mountain soils to retain water, potentially increasing their vulnerability to dry periods in the future.
- 4 September 2025
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 29 (17) , 4093-4107
Open AccessMulti-instrumental monitoring of snowmelt infiltration in Vallon de Nant, Swiss Alps
To gain a deeper understanding of the dynamics of the contribution of snowmelt to mountainous water cycles, it is necessary to better understand the processes controlling the infiltration of snowmelt into mountainous soils. This research uniquely combines snowmelt rate data with soil moisture dynamics, providing a comprehensive 3-year dataset. The integration of multiple measurement techniques and the estimation of the snowmelt rate through the measurement of snow resistivity offer a new perspective on snowmelt infiltration processes. The study area is located in Vallon de Nant, Swiss Alps. Measurement points are distributed at mid- to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt infiltration dynamics in the study area. Results indicate that, although melt rates are considerably lower than soil saturated hydraulic conductivity values, the response times of shallow soil moisture and stream discharge to melt events are fast (from 2 to 5 h). At the point measurement locations, snowmelt hardly infiltrates below 30 cm. These findings highlight how the fast recession of soil moisture peaks to snowmelt may limit the capacity of mountain soils to retain water, potentially increasing their vulnerability to dry periods in the future.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Subglacial bedload export quantification and subglacial drainage network evolution inferred using environmental seismology techniques
Alpine glaciers have been retreating at increasing rates in recent decades due to climate warming. As a consequence, large amounts of suspended and bedload flux are exported from subglacial channels to proglacial environments, such as proglacial forefields. To date, our understanding of subglacial sediment export by subglacial streams has been predominantly shaped by suspended sediment dynamics recorded in front of shrinking glaciers, primarily due to difficulties in measuring bedload transport. Bedload transport is typically monitored far downstream from glacier termini at permanent monitoring stations (e.g. water intakes), leaving significant uncertainties regarding the absolute quantities and temporal patterns of transport in both glacial and proglacial environments, as well as its relative importance compared to suspended sediment in the context of proglacial morphodynamic filtering. Recent advancements in environmental seismology have addressed this knowledge gap. Given this, the aim of this project was to develop a novel technique for calibrating the Fluvial Model Inversion (FMI) model of Dietze et al. (2019) to quantify, for the first time, the total subglacial bedload export from an Alpine glacier and to investigate the physical mechanisms driving it.This work focuses on a large Alpine glacier, the Glacier d’Otemma, located in the Southwestern Swiss Alps (Canton Valais). Continuous seismic data were collected in close proximity to the glacier terminus using a DATA-CUBE type 2 datalogger connected to a three-component PE-6/B geophone, over two entire melt seasons (June to September 2020 and 2021) experiencing different climatic conditions: the first year was warm and relatively dry, while the second was cold and relatively wet.The seismic ground parameter values of the FMI model used to invert the raw seismic data into bedload transport were determined by adopting a Monte Carlo simulation based on a Generalized Likelihood Uncertainty Estimation (GLUE) approach. This involved iteratively running thousands of inversions within predefined ranges of possible ground seismic parameter values. The methodology was validated by comparing parameter values and model outputs to those obtained using a more conventional active seismic survey.Results indicate that the developed methodology for calibrating the inversion model is promising and comparable to those derived from the more demanding active seismic survey technique. Scientifically, findings reveal a strong agreement between subglacial bedload export rates and the snowline altitude during the melt season. Extremely warm summers are associated with the exhaustion of subglacial bedload sources as the progressive rise of the snowline altitude fully exposes the glacier's bare ice, while cooler summers show the opposite pattern. This highlights the existence of a link between atmospheric temperature, subglacial drainage network extension, and bedload output rates. These results are crucial for advancing our understanding of the relationship between subglacial sediment export and meteorological conditions in a warming climate.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessSubglacial bedload export quantification and subglacial drainage network evolution inferred using environmental seismology techniques
Alpine glaciers have been retreating at increasing rates in recent decades due to climate warming. As a consequence, large amounts of suspended and bedload flux are exported from subglacial channels to proglacial environments, such as proglacial forefields. To date, our understanding of subglacial sediment export by subglacial streams has been predominantly shaped by suspended sediment dynamics recorded in front of shrinking glaciers, primarily due to difficulties in measuring bedload transport. Bedload transport is typically monitored far downstream from glacier termini at permanent monitoring stations (e.g. water intakes), leaving significant uncertainties regarding the absolute quantities and temporal patterns of transport in both glacial and proglacial environments, as well as its relative importance compared to suspended sediment in the context of proglacial morphodynamic filtering. Recent advancements in environmental seismology have addressed this knowledge gap. Given this, the aim of this project was to develop a novel technique for calibrating the Fluvial Model Inversion (FMI) model of Dietze et al. (2019) to quantify, for the first time, the total subglacial bedload export from an Alpine glacier and to investigate the physical mechanisms driving it.This work focuses on a large Alpine glacier, the Glacier d’Otemma, located in the Southwestern Swiss Alps (Canton Valais). Continuous seismic data were collected in close proximity to the glacier terminus using a DATA-CUBE type 2 datalogger connected to a three-component PE-6/B geophone, over two entire melt seasons (June to September 2020 and 2021) experiencing different climatic conditions: the first year was warm and relatively dry, while the second was cold and relatively wet.The seismic ground parameter values of the FMI model used to invert the raw seismic data into bedload transport were determined by adopting a Monte Carlo simulation based on a Generalized Likelihood Uncertainty Estimation (GLUE) approach. This involved iteratively running thousands of inversions within predefined ranges of possible ground seismic parameter values. The methodology was validated by comparing parameter values and model outputs to those obtained using a more conventional active seismic survey.Results indicate that the developed methodology for calibrating the inversion model is promising and comparable to those derived from the more demanding active seismic survey technique. Scientifically, findings reveal a strong agreement between subglacial bedload export rates and the snowline altitude during the melt season. Extremely warm summers are associated with the exhaustion of subglacial bedload sources as the progressive rise of the snowline altitude fully exposes the glacier's bare ice, while cooler summers show the opposite pattern. This highlights the existence of a link between atmospheric temperature, subglacial drainage network extension, and bedload output rates. These results are crucial for advancing our understanding of the relationship between subglacial sediment export and meteorological conditions in a warming climate.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Low bedload mobility in an Alpine subglacial channel
The rate at which Alpine glaciers erode their bedrock and evacuate eroded sediment to downstream environments is a fundamental control on landscape evolution, ecosystem dynamics and water quality. However, directly measuring subglacial erosion and sediment evacuation processes is extremely difficult since they occur under tens to hundreds of meters of ice. In general, Alpine glaciers are thought to be efficient at evacuating subglacially eroded sediment via meltwater flow in subglacial channels with very high transport capacities. However, recent field observations and hydrological modelling work suggests that coarse sediment transport may be inhibited near glacier termini in the presence of unpressurised subglacial channels. Accumulation of coarse sediment may substantially affect subglacial erosion and hydrology. Extended lags between coarse sediment production and eventual evacuation may also limit the timescales over which sediment export measurements in proglacial rivers can be used to estimate glacial erosion rates. Here, we apply a recently developed method for tracking radio-tagged particles as they are transported through subglacial channels to assess coarse sediment mobility. We deployed 324 pebbles and cobbles tagged with active RFID tags directly into an unpressurised, ice-marginal subglacial channel at the Otemma Glacier, southwestern Switzerland and tracked their motion from the glacier surface using a system of roving and stationary antennas (350 m channel reach). We report very low movement and prolonged storage of coarse subglacial sediment. Particle motion remained low despite exceptionally high meltwater discharge during the mid to late melt season. Only 16% of particles were transported out of the glacier, indicating significant inter-annual storage of coarse sediment. These results reveal that some glaciers do not efficiently evacuate coarse sediment, suggesting that sediment export records from proglacial rivers may be better suited for inferring erosion rates over extended timescales (decadal or longer) rather than shorter, typical observation periods.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessLow bedload mobility in an Alpine subglacial channel
The rate at which Alpine glaciers erode their bedrock and evacuate eroded sediment to downstream environments is a fundamental control on landscape evolution, ecosystem dynamics and water quality. However, directly measuring subglacial erosion and sediment evacuation processes is extremely difficult since they occur under tens to hundreds of meters of ice. In general, Alpine glaciers are thought to be efficient at evacuating subglacially eroded sediment via meltwater flow in subglacial channels with very high transport capacities. However, recent field observations and hydrological modelling work suggests that coarse sediment transport may be inhibited near glacier termini in the presence of unpressurised subglacial channels. Accumulation of coarse sediment may substantially affect subglacial erosion and hydrology. Extended lags between coarse sediment production and eventual evacuation may also limit the timescales over which sediment export measurements in proglacial rivers can be used to estimate glacial erosion rates. Here, we apply a recently developed method for tracking radio-tagged particles as they are transported through subglacial channels to assess coarse sediment mobility. We deployed 324 pebbles and cobbles tagged with active RFID tags directly into an unpressurised, ice-marginal subglacial channel at the Otemma Glacier, southwestern Switzerland and tracked their motion from the glacier surface using a system of roving and stationary antennas (350 m channel reach). We report very low movement and prolonged storage of coarse subglacial sediment. Particle motion remained low despite exceptionally high meltwater discharge during the mid to late melt season. Only 16% of particles were transported out of the glacier, indicating significant inter-annual storage of coarse sediment. These results reveal that some glaciers do not efficiently evacuate coarse sediment, suggesting that sediment export records from proglacial rivers may be better suited for inferring erosion rates over extended timescales (decadal or longer) rather than shorter, typical observation periods.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Comprehensive monitoring of the subglacial stream of Glacier d'Otemma using seismic nodes and distributed acoustic sensing data
Subglacial processes are difficult to monitor due to their inaccessibility with conventional hydrological probes. We know relatively little about when and at what rate the products of subglacial erosion are evacuated, especially for coarse sediment (bedload). Environmental seismology is contributing to close this knowledge gap, providing some of the first, seasonal-scale datasets on bedload evacuation by subglacial streams. The advantage of seismic monitoring of subglacial sediment transport is that it does not need to be installed directly into the water. The location of a static subglacial channel can be found using techniques such as GPR surveys, but rapid changes in the subglacial channel system require continuous data sets on channel location. Monitoring seismic amplitudes and applying beamforming methods to seismic array records, one can locate noise sources and thus identify variations in activity and location of subglacial streams and bedload transport. This may be done using arrays of seismic nodes and/or distributed acoustic sensing (DAS) along an optical fiber. To identify the best use of such methods for monitoring the subglacial stream, the present study compares conventional seismic sensors and fiber optic cables for beamforming source location. The field site of this study is Glacier d’Otemma in Valais, Switzerland. Given two data sets of seismic nodes and DAS, as well as ancillary observations, we can identify the location of the subglacial river and track changes in its discharge and bedload transport rate. These findings mainly relate to variations in seismic noise throughout the diurnal cycle of glacier melt. Depending on frequency band and daytime, the location of the most intense seismic noise, averaged over two hours, varies. These variations relate to processes such as surface melt, which stops during night, and subglacial flow, which continues but is less intense. Seismology proves to be a temporally and spacially rich tool to monitor this constantly changing activity of glaciers.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessComprehensive monitoring of the subglacial stream of Glacier d'Otemma using seismic nodes and distributed acoustic sensing data
Subglacial processes are difficult to monitor due to their inaccessibility with conventional hydrological probes. We know relatively little about when and at what rate the products of subglacial erosion are evacuated, especially for coarse sediment (bedload). Environmental seismology is contributing to close this knowledge gap, providing some of the first, seasonal-scale datasets on bedload evacuation by subglacial streams. The advantage of seismic monitoring of subglacial sediment transport is that it does not need to be installed directly into the water. The location of a static subglacial channel can be found using techniques such as GPR surveys, but rapid changes in the subglacial channel system require continuous data sets on channel location. Monitoring seismic amplitudes and applying beamforming methods to seismic array records, one can locate noise sources and thus identify variations in activity and location of subglacial streams and bedload transport. This may be done using arrays of seismic nodes and/or distributed acoustic sensing (DAS) along an optical fiber. To identify the best use of such methods for monitoring the subglacial stream, the present study compares conventional seismic sensors and fiber optic cables for beamforming source location. The field site of this study is Glacier d’Otemma in Valais, Switzerland. Given two data sets of seismic nodes and DAS, as well as ancillary observations, we can identify the location of the subglacial river and track changes in its discharge and bedload transport rate. These findings mainly relate to variations in seismic noise throughout the diurnal cycle of glacier melt. Depending on frequency band and daytime, the location of the most intense seismic noise, averaged over two hours, varies. These variations relate to processes such as surface melt, which stops during night, and subglacial flow, which continues but is less intense. Seismology proves to be a temporally and spacially rich tool to monitor this constantly changing activity of glaciers.
- Open Access
- 25 February 2025
- Published by Open Book Publishers
- p. 153-170
9. Inclusive practices in fieldwork
Fieldwork is essential in geosciences for data collection, model validation, as well as personal development. Yet, traditional fieldwork environments often perpetuate biases related to gender, identity, and societal roles while also exposing participants to physical and interpersonal hazards. This chapter reviews recent advances towards safer and more inclusive fieldwork practices. Key recommendations include transparent communication about physical requirements, providing suitable protective equipment, accommodating medical and privacy needs considering the diverse backgrounds and abilities of fieldworkers. Inclusive risk assessments, codes of conduct, and comprehensive training are key tools to emphasise team morale, clear communication, and conflict management, to ensure a supportive and equitable fieldwork experience for all.
- 25 February 2025
- Published by Open Book Publishers
- p. 153-170
Open Access9. Inclusive practices in fieldwork
Fieldwork is essential in geosciences for data collection, model validation, as well as personal development. Yet, traditional fieldwork environments often perpetuate biases related to gender, identity, and societal roles while also exposing participants to physical and interpersonal hazards. This chapter reviews recent advances towards safer and more inclusive fieldwork practices. Key recommendations include transparent communication about physical requirements, providing suitable protective equipment, accommodating medical and privacy needs considering the diverse backgrounds and abilities of fieldworkers. Inclusive risk assessments, codes of conduct, and comprehensive training are key tools to emphasise team morale, clear communication, and conflict management, to ensure a supportive and equitable fieldwork experience for all.
- Open Access
- 25 February 2025
- Published by Open Book Publishers
- p. 171-180
10. Fieldwork safety planning and risk management
Fieldwork involves unique safety challenges including environmental, operational and social hazards. Unlike laboratory settings with established protocols, fieldwork safety requires adaptive and comprehensive strategies to assess and manage risks. This chapter introduces structured safety planning, emphasising proactive and reactive safety measures, and suggests adapting the industrial bow tie models to a fieldwork context. Key elements include thorough planning, specialised training, and appropriate equipment. By integrating these components, field teams can enhance their preparedness and ensure safer research activities.
- 25 February 2025
- Published by Open Book Publishers
- p. 171-180
Open Access10. Fieldwork safety planning and risk management
Fieldwork involves unique safety challenges including environmental, operational and social hazards. Unlike laboratory settings with established protocols, fieldwork safety requires adaptive and comprehensive strategies to assess and manage risks. This chapter introduces structured safety planning, emphasising proactive and reactive safety measures, and suggests adapting the industrial bow tie models to a fieldwork context. Key elements include thorough planning, specialised training, and appropriate equipment. By integrating these components, field teams can enhance their preparedness and ensure safer research activities.
- Open Access
- 29 January 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-23
Reply on RC2
To gain a deeper understanding of the dynamics of the contribution of snow melt to mountainous water cycles, it is necessary to better grasp the parameters controlling the infiltration of snow melt into mountainous soils. This research uniquely combines snow melt rate data with soil moisture dynamics, providing a comprehensive, three-year dataset. The integration of multiple measurement techniques and the estimation of the snow melt rate through the measurement of snow resistivity offer a new perspective on snow melt infiltration processes. The study area is located in the Nant Valley, Swiss Alps. Measurement points are distributed in mid to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt-infiltration dynamics in the study area. Results indicate that, even though melt rates are considerably lower than soil saturated hydraulic conductivity values (with a ratio of 3.1x10-3 on average), the response times of shallow soil moisture and stream discharge to melt events is fast (from 2 to 5 hours). At the point measurement, snowmelt hardly infiltrates below 30 cm. These findings emphasize the potential vulnerability of mountain areas to dry periods in the future, particularly in the context of the expected shortening of the melt period due to climate change.
- 29 January 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-23
Open AccessReply on RC2
To gain a deeper understanding of the dynamics of the contribution of snow melt to mountainous water cycles, it is necessary to better grasp the parameters controlling the infiltration of snow melt into mountainous soils. This research uniquely combines snow melt rate data with soil moisture dynamics, providing a comprehensive, three-year dataset. The integration of multiple measurement techniques and the estimation of the snow melt rate through the measurement of snow resistivity offer a new perspective on snow melt infiltration processes. The study area is located in the Nant Valley, Swiss Alps. Measurement points are distributed in mid to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt-infiltration dynamics in the study area. Results indicate that, even though melt rates are considerably lower than soil saturated hydraulic conductivity values (with a ratio of 3.1x10-3 on average), the response times of shallow soil moisture and stream discharge to melt events is fast (from 2 to 5 hours). At the point measurement, snowmelt hardly infiltrates below 30 cm. These findings emphasize the potential vulnerability of mountain areas to dry periods in the future, particularly in the context of the expected shortening of the melt period due to climate change.
- Open Access
- 27 January 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-23
Reply on RC1
To gain a deeper understanding of the dynamics of the contribution of snow melt to mountainous water cycles, it is necessary to better grasp the parameters controlling the infiltration of snow melt into mountainous soils. This research uniquely combines snow melt rate data with soil moisture dynamics, providing a comprehensive, three-year dataset. The integration of multiple measurement techniques and the estimation of the snow melt rate through the measurement of snow resistivity offer a new perspective on snow melt infiltration processes. The study area is located in the Nant Valley, Swiss Alps. Measurement points are distributed in mid to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt-infiltration dynamics in the study area. Results indicate that, even though melt rates are considerably lower than soil saturated hydraulic conductivity values (with a ratio of 3.1x10-3 on average), the response times of shallow soil moisture and stream discharge to melt events is fast (from 2 to 5 hours). At the point measurement, snowmelt hardly infiltrates below 30 cm. These findings emphasize the potential vulnerability of mountain areas to dry periods in the future, particularly in the context of the expected shortening of the melt period due to climate change.
- 27 January 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-23
Open AccessReply on RC1
To gain a deeper understanding of the dynamics of the contribution of snow melt to mountainous water cycles, it is necessary to better grasp the parameters controlling the infiltration of snow melt into mountainous soils. This research uniquely combines snow melt rate data with soil moisture dynamics, providing a comprehensive, three-year dataset. The integration of multiple measurement techniques and the estimation of the snow melt rate through the measurement of snow resistivity offer a new perspective on snow melt infiltration processes. The study area is located in the Nant Valley, Swiss Alps. Measurement points are distributed in mid to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt-infiltration dynamics in the study area. Results indicate that, even though melt rates are considerably lower than soil saturated hydraulic conductivity values (with a ratio of 3.1x10-3 on average), the response times of shallow soil moisture and stream discharge to melt events is fast (from 2 to 5 hours). At the point measurement, snowmelt hardly infiltrates below 30 cm. These findings emphasize the potential vulnerability of mountain areas to dry periods in the future, particularly in the context of the expected shortening of the melt period due to climate change.
- Open Access
- 27 January 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-23
Reply on RC3
To gain a deeper understanding of the dynamics of the contribution of snow melt to mountainous water cycles, it is necessary to better grasp the parameters controlling the infiltration of snow melt into mountainous soils. This research uniquely combines snow melt rate data with soil moisture dynamics, providing a comprehensive, three-year dataset. The integration of multiple measurement techniques and the estimation of the snow melt rate through the measurement of snow resistivity offer a new perspective on snow melt infiltration processes. The study area is located in the Nant Valley, Swiss Alps. Measurement points are distributed in mid to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt-infiltration dynamics in the study area. Results indicate that, even though melt rates are considerably lower than soil saturated hydraulic conductivity values (with a ratio of 3.1x10-3 on average), the response times of shallow soil moisture and stream discharge to melt events is fast (from 2 to 5 hours). At the point measurement, snowmelt hardly infiltrates below 30 cm. These findings emphasize the potential vulnerability of mountain areas to dry periods in the future, particularly in the context of the expected shortening of the melt period due to climate change.
- 27 January 2025
- Published by Copernicus GmbH
- Vol. 2024, 1-23
Open AccessReply on RC3
To gain a deeper understanding of the dynamics of the contribution of snow melt to mountainous water cycles, it is necessary to better grasp the parameters controlling the infiltration of snow melt into mountainous soils. This research uniquely combines snow melt rate data with soil moisture dynamics, providing a comprehensive, three-year dataset. The integration of multiple measurement techniques and the estimation of the snow melt rate through the measurement of snow resistivity offer a new perspective on snow melt infiltration processes. The study area is located in the Nant Valley, Swiss Alps. Measurement points are distributed in mid to high elevations in various alpine environments. Besides demonstrating the instrumental setup, we also investigated the snowmelt-infiltration dynamics in the study area. Results indicate that, even though melt rates are considerably lower than soil saturated hydraulic conductivity values (with a ratio of 3.1x10-3 on average), the response times of shallow soil moisture and stream discharge to melt events is fast (from 2 to 5 hours). At the point measurement, snowmelt hardly infiltrates below 30 cm. These findings emphasize the potential vulnerability of mountain areas to dry periods in the future, particularly in the context of the expected shortening of the melt period due to climate change.