Luna Bloin-Wibe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Luna Bloin-Wibe has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Erich Fischer
ETH Zurich
12 shared publications - Reto Knutti
ETH Zurich
12 shared publications - Urs Beyerle
Institute for Atmospheric and Climate Science, ETH Zurich, Zurich, Switzerland
9 shared publications - Vincent Humphrey
Federal Office of Meteorology and Climatology MeteoSwiss, Zurich, CH-8058, Switzerland
6 shared publications - Francesco De Marco
Reliability and Risk Engineering, ETH Zurich, Zurich, Switzerland
4 shared publications - Jan Wohland
Department of Technology Systems, University of Oslo, Kjeller, Norway
4 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by Wiley
Understanding future extreme renewable energy droughts with ensemble boosting
Renewable energy generation and electricity demand are highly weather-dependent, which means that decarbonizing and electrifying the energy system will increase its vulnerability to climate change and extremes. However, since extremes are rare, their effects on the energy system remain challenging to assess in currently available data sets. Here, we overcome this challenge by using ensemble boosting to efficiently sample physically consistent severe energy droughts. Energy droughts are identified by coupling climate simulations to an energy model based on net load, allowing us to directly investigate extremes with the highest system severity. We find that while climate change reduces energy drought severity in systems with high heating demand electrification, these systems are more vulnerable to very severe boosted energy droughts. Indeed, the severity of boosted energy droughts in such a system ranges from 37 to 230 TWh, even though their initial conditions are identical two weeks before event onset. Our results thus highlight the weather-induced unpredictability of net load in fully renewable systems and question the assumption of perfect foresight. In contrast, lower levels of heating electrification lead to shorter, more seasonally widespread extremes that are less affected by climate change, although the most severe energy droughts still occur in fall and winter. Regardless of electrification levels, wind speed deficits, seasonally low solar PV and the gradual depletion of hydropower storage over winter also contribute to the severity of the extreme renewable energy droughts studied. Our results demonstrate the power of ensemble boosting to inform future planning by uncovering system vulnerabilities.
- 12 November 2026
- Published by Wiley
Open AccessUnderstanding future extreme renewable energy droughts with ensemble boosting
Renewable energy generation and electricity demand are highly weather-dependent, which means that decarbonizing and electrifying the energy system will increase its vulnerability to climate change and extremes. However, since extremes are rare, their effects on the energy system remain challenging to assess in currently available data sets. Here, we overcome this challenge by using ensemble boosting to efficiently sample physically consistent severe energy droughts. Energy droughts are identified by coupling climate simulations to an energy model based on net load, allowing us to directly investigate extremes with the highest system severity. We find that while climate change reduces energy drought severity in systems with high heating demand electrification, these systems are more vulnerable to very severe boosted energy droughts. Indeed, the severity of boosted energy droughts in such a system ranges from 37 to 230 TWh, even though their initial conditions are identical two weeks before event onset. Our results thus highlight the weather-induced unpredictability of net load in fully renewable systems and question the assumption of perfect foresight. In contrast, lower levels of heating electrification lead to shorter, more seasonally widespread extremes that are less affected by climate change, although the most severe energy droughts still occur in fall and winter. Regardless of electrification levels, wind speed deficits, seasonally low solar PV and the gradual depletion of hydropower storage over winter also contribute to the severity of the extreme renewable energy droughts studied. Our results demonstrate the power of ensemble boosting to inform future planning by uncovering system vulnerabilities.
- Open Access
- 25 March 2026
- Published by IOP Publishing in Environmental Research Letters
- Vol. 21 (8)
Climate change impacts on net load under technological uncertainty in European power systems
Renewable energy sources play a major role in future net-zero energy systems. However, achieving energy system resilience remains challenging, since renewables strongly depend on weather fluctuations, and future energy systems are subject to major design uncertainty. Existing literature mostly treats these types of uncertainty separately. Therefore, the assessment and comparison of uncertainties surrounding climate change and energy system design, and particularly their interactions, is insufficiently understood. To close this gap, we evaluate net load to assess energy system stress without relying on perfect foresight, while maintaining the temporal and spatial correlations of the climate system. Net load is calculated from hourly historical and future climate model data translated to energy variables. To scope the extent of plausible energy systems, we consider eight different design scenarios inspired by the European Ten-Year Network Development Plan (TYNDP) and different levels of transmission expansion. We find that climate change impacts on net load are highly sensitive to the energy system design, implying that energy systems can be designed so that they are either hindered or helped by climate change. Furthermore, within an energy system scenario, climate change can change the frequency and seasonality of high net load events and their technological and meteorological composition. Wind-dominated systems with currently electrified heating levels, for instance, feature a 30\% increase of high net load events under climate change, mostly in summer and fall, while fully electrified net zero systems are impacted by high net load events in winter and spring, which decrease by 50\% with climate change. Our work thus calls for a wider perspective on energy-climate stress that captures the non-linear interactions of climate change and energy system design uncertainty, thereby overcoming the current focus on cold "Dunkelflauten".
- 25 March 2026
- Published by IOP Publishing in Environmental Research Letters
- Vol. 21 (8)
Open AccessClimate change impacts on net load under technological uncertainty in European power systems
Renewable energy sources play a major role in future net-zero energy systems. However, achieving energy system resilience remains challenging, since renewables strongly depend on weather fluctuations, and future energy systems are subject to major design uncertainty. Existing literature mostly treats these types of uncertainty separately. Therefore, the assessment and comparison of uncertainties surrounding climate change and energy system design, and particularly their interactions, is insufficiently understood. To close this gap, we evaluate net load to assess energy system stress without relying on perfect foresight, while maintaining the temporal and spatial correlations of the climate system. Net load is calculated from hourly historical and future climate model data translated to energy variables. To scope the extent of plausible energy systems, we consider eight different design scenarios inspired by the European Ten-Year Network Development Plan (TYNDP) and different levels of transmission expansion. We find that climate change impacts on net load are highly sensitive to the energy system design, implying that energy systems can be designed so that they are either hindered or helped by climate change. Furthermore, within an energy system scenario, climate change can change the frequency and seasonality of high net load events and their technological and meteorological composition. Wind-dominated systems with currently electrified heating levels, for instance, feature a 30\% increase of high net load events under climate change, mostly in summer and fall, while fully electrified net zero systems are impacted by high net load events in winter and spring, which decrease by 50\% with climate change. Our work thus calls for a wider perspective on energy-climate stress that captures the non-linear interactions of climate change and energy system design uncertainty, thereby overcoming the current focus on cold "Dunkelflauten".
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Under the Magnifying Glass: multi-scale climate impacts on renewable energy supply and demand in Europe
The deployment of renewable energy technologies is accelerating globally as part of climate mitigation strategies, with capacities projected to triple by 2030 compared to 2023 levels. To be effective, this rapid expansion should be guided by long-term planning that accounts for a changing and varying climate. Such planning efforts are usually supported by energy system models, but these models often lack integration of future climate information. The SPEED2ZERO project addresses this gap by bridging energy and climate research to develop climate-resilient energy transition pathways for Switzerland. To achieve this, a Swiss electricity systems model with high spatial resolution is bounded by outputs of a coarser European model. This multi-scale approach requires coherent climate-informed inputs that align with both spatial resolutions.To generate these multi-scale inputs, we develop climate-driven projections for hydropower, solar, and wind power, as well as heating and cooling demand for Switzerland and Europe. This comprehensive dataset covers the Representative Concentration Pathways (RCPs) 2.6 and 8.5. We leverage high-resolution regional climate model simulations from the EURO-CORDEX archive that include transient aerosols and bias-correct the relevant variables using CERRA and CERRA-Land reanalysis data. We additionally perform dedicated hydrological simulations for Switzerland using the PREVAH model and route the climate model runoff for Europe using the mRM model. In total, this study considers 3 climate model chains for RCP2.6 and 9 for RCP8.5. These chains consist of global climate model-regional climate model pairs spanning 1991 to 2100. The modeling pipeline employs open-source tools, such as pvlib and windpowerlib, along with technical specifications provided by energy system modelers, to convert the processed climate data into energy quantities. Results from the modelling pipeline indicate a consistent increase in PV potential over time, a trend mainly attributable to declining aerosols concentrations over most of Europe. In contrast, wind power and water availability for hydropower exhibit substantial spatial variability and model disagreement, including opposing wetting and drying trends across different climate model chains. As these climate signals are spatially heterogeneous, high resolution climate simulations are essential to explore the nuances that coarser datasets might overlook. This granularity allows, for example, the analysis of climate impacts at individual hydropower plants or reservoirs. First results for Switzerland indicate a decline in hydropower generation in the second half of the century, with nationwide trends not always coinciding with trends at single sites. These findings highlight the need to consider energy system planning both from a big picture and local perspective lens to ensure the system's resilience.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessUnder the Magnifying Glass: multi-scale climate impacts on renewable energy supply and demand in Europe
The deployment of renewable energy technologies is accelerating globally as part of climate mitigation strategies, with capacities projected to triple by 2030 compared to 2023 levels. To be effective, this rapid expansion should be guided by long-term planning that accounts for a changing and varying climate. Such planning efforts are usually supported by energy system models, but these models often lack integration of future climate information. The SPEED2ZERO project addresses this gap by bridging energy and climate research to develop climate-resilient energy transition pathways for Switzerland. To achieve this, a Swiss electricity systems model with high spatial resolution is bounded by outputs of a coarser European model. This multi-scale approach requires coherent climate-informed inputs that align with both spatial resolutions.To generate these multi-scale inputs, we develop climate-driven projections for hydropower, solar, and wind power, as well as heating and cooling demand for Switzerland and Europe. This comprehensive dataset covers the Representative Concentration Pathways (RCPs) 2.6 and 8.5. We leverage high-resolution regional climate model simulations from the EURO-CORDEX archive that include transient aerosols and bias-correct the relevant variables using CERRA and CERRA-Land reanalysis data. We additionally perform dedicated hydrological simulations for Switzerland using the PREVAH model and route the climate model runoff for Europe using the mRM model. In total, this study considers 3 climate model chains for RCP2.6 and 9 for RCP8.5. These chains consist of global climate model-regional climate model pairs spanning 1991 to 2100. The modeling pipeline employs open-source tools, such as pvlib and windpowerlib, along with technical specifications provided by energy system modelers, to convert the processed climate data into energy quantities. Results from the modelling pipeline indicate a consistent increase in PV potential over time, a trend mainly attributable to declining aerosols concentrations over most of Europe. In contrast, wind power and water availability for hydropower exhibit substantial spatial variability and model disagreement, including opposing wetting and drying trends across different climate model chains. As these climate signals are spatially heterogeneous, high resolution climate simulations are essential to explore the nuances that coarser datasets might overlook. This granularity allows, for example, the analysis of climate impacts at individual hydropower plants or reservoirs. First results for Switzerland indicate a decline in hydropower generation in the second half of the century, with nationwide trends not always coinciding with trends at single sites. These findings highlight the need to consider energy system planning both from a big picture and local perspective lens to ensure the system's resilience.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Climate change impacts on net load under technological uncertainty in European power systems
Renewable energy sources play a major role in future net-zero energy systems. However, achieving energy system resilience remains challenging, since renewables strongly depend on weather fluctuations, and future energy systems are subject to major design uncertainty. Existing literature mostly treats these types of uncertainty separately. Therefore, the assessment and comparison of uncertainties surrounding climate change and energy system design, and particularly their interactions, is insufficiently understood.To close this gap, we evaluate net load to assess energy system stress without relying on perfect foresight, while maintaining the temporal and spatial correlations of the climate system. Net load is calculated from hourly historical and future climate model data translated to energy variables. To scope the extent of plausible energy systems, we consider eight different design scenarios inspired by the European Ten-Year Network Development Plan (TYNDP) and different levels of transmission expansion.We find that climate change impacts on net load are highly sensitive to the energy system design, implying that energy systems can be designed so that they are either hindered or helped by climate change. Furthermore, within an energy system scenario, climate change can change the frequency and seasonality of high net load events and their technological and meteorological composition. Wind-dominated systems with currently electrified heating levels, for instance, feature a 30% increase of high net load events under climate change, mostly in summer and fall, while fully electrified net zero systems are impacted by high net load events in winter and spring, which decrease by 50% with climate change. Our work thus calls for a wider perspective on energy-climate stress that captures the non-linear interactions of climate change and energy system design uncertainty, thereby overcoming the current focus on cold "Dunkelflauten".
- 13 March 2026
- Published by Copernicus GmbH
Open AccessClimate change impacts on net load under technological uncertainty in European power systems
Renewable energy sources play a major role in future net-zero energy systems. However, achieving energy system resilience remains challenging, since renewables strongly depend on weather fluctuations, and future energy systems are subject to major design uncertainty. Existing literature mostly treats these types of uncertainty separately. Therefore, the assessment and comparison of uncertainties surrounding climate change and energy system design, and particularly their interactions, is insufficiently understood.To close this gap, we evaluate net load to assess energy system stress without relying on perfect foresight, while maintaining the temporal and spatial correlations of the climate system. Net load is calculated from hourly historical and future climate model data translated to energy variables. To scope the extent of plausible energy systems, we consider eight different design scenarios inspired by the European Ten-Year Network Development Plan (TYNDP) and different levels of transmission expansion.We find that climate change impacts on net load are highly sensitive to the energy system design, implying that energy systems can be designed so that they are either hindered or helped by climate change. Furthermore, within an energy system scenario, climate change can change the frequency and seasonality of high net load events and their technological and meteorological composition. Wind-dominated systems with currently electrified heating levels, for instance, feature a 30% increase of high net load events under climate change, mostly in summer and fall, while fully electrified net zero systems are impacted by high net load events in winter and spring, which decrease by 50% with climate change. Our work thus calls for a wider perspective on energy-climate stress that captures the non-linear interactions of climate change and energy system design uncertainty, thereby overcoming the current focus on cold "Dunkelflauten".
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Climate2Energy: a framework to consistently include climate change into energy system modeling
Climate models become increasingly sophisticated over time, capitalizing on better modeling techniques, process understanding and computational power. Energy systems become more exposed to climatic changes owing to the increased deployment of weather-dependent renewables as well as heating and cooling systems. There is thus an urgent need for improved usage of climate model simulations in the energy sector.Here, we present dedicated hourly climate model simulations with CESM2 and a new pipeline to translate climate model output to renewable generation timeseries and heating/cooling demand. We showcase the Climate2Energy workflow that combines bias-correction with existing open-source tools for individual energy sector components (GSEE, windpowerlib, demandninja). We include all relevant types of renewable generation, namely onshore wind, offshore wind, PV, hydropower, and heating/cooling demand in a consistent and synchronized manner. In contrast to assessments drawing from published climate datasets such as CMIP and EURO-CORDEX, we can use non-standard climate model outputs, such as model level winds, air densities, and river discharge.Using the SSP370 scenario and sampling different phases of the North Atlantic Oscillation to account for climate variability, our results reveal strongly altered future heating (up to 50% reductions) and cooling demand (up to 20-fold increases). In line with previous studies, the impacts on renewable generation are substantially smaller in terms of mean capacity factors. For instance, onshore wind potentials drop by a few percent in many countries while PV potentials increase by similar amounts. More pronounced changes manifest, for example, in the seasonal cycle and in inter-technology complementarity. Furthermore, stochastic optimizations with AnyMOD reveal that a future cost optimal power system looks substantially different from a current one.Overall, our results underline the need for further analysis of the combined effects of climate change on energy systems. We provide the Climate2Energy pipeline and the data with an open license, aiming to contribute to better and more standardized climate change impact assessments in the energy sector. REFERENCEWohland, J. et al. Climate2Energy: a framework to consistently include climate change into energy system modeling. Environ. Res.: Energy 2, 041001 (2025) https://doi.org/10.1088/2753-3751/ae2870
- 13 March 2026
- Published by Copernicus GmbH
Open AccessClimate2Energy: a framework to consistently include climate change into energy system modeling
Climate models become increasingly sophisticated over time, capitalizing on better modeling techniques, process understanding and computational power. Energy systems become more exposed to climatic changes owing to the increased deployment of weather-dependent renewables as well as heating and cooling systems. There is thus an urgent need for improved usage of climate model simulations in the energy sector.Here, we present dedicated hourly climate model simulations with CESM2 and a new pipeline to translate climate model output to renewable generation timeseries and heating/cooling demand. We showcase the Climate2Energy workflow that combines bias-correction with existing open-source tools for individual energy sector components (GSEE, windpowerlib, demandninja). We include all relevant types of renewable generation, namely onshore wind, offshore wind, PV, hydropower, and heating/cooling demand in a consistent and synchronized manner. In contrast to assessments drawing from published climate datasets such as CMIP and EURO-CORDEX, we can use non-standard climate model outputs, such as model level winds, air densities, and river discharge.Using the SSP370 scenario and sampling different phases of the North Atlantic Oscillation to account for climate variability, our results reveal strongly altered future heating (up to 50% reductions) and cooling demand (up to 20-fold increases). In line with previous studies, the impacts on renewable generation are substantially smaller in terms of mean capacity factors. For instance, onshore wind potentials drop by a few percent in many countries while PV potentials increase by similar amounts. More pronounced changes manifest, for example, in the seasonal cycle and in inter-technology complementarity. Furthermore, stochastic optimizations with AnyMOD reveal that a future cost optimal power system looks substantially different from a current one.Overall, our results underline the need for further analysis of the combined effects of climate change on energy systems. We provide the Climate2Energy pipeline and the data with an open license, aiming to contribute to better and more standardized climate change impact assessments in the energy sector. REFERENCEWohland, J. et al. Climate2Energy: a framework to consistently include climate change into energy system modeling. Environ. Res.: Energy 2, 041001 (2025) https://doi.org/10.1088/2753-3751/ae2870
- Open Access
- 18 December 2025
- Published by IOP Publishing in Environmental Research: Energy
- Vol. 2 (4) , 041001
Climate2Energy: a framework to consistently include climate change into energy system modeling
Supply and demand in future energy systems depend on the weather. We therefore need to quantify how climate change and variability impact energy systems. Here, we present Climate2Energy (C2E), a framework to consistently convert climate model outputs into energy system model inputs, covering all relevant types of renewable generation and demand for heating and cooling. C2E performs bias correction, uses established open-source tools where possible, and provides outputs tailored to energy system models. Moreover, C2E introduces a new hydropower model based on river discharge. We analyze dedicated hourly CESM2 Climate Model Simulations under the SSP3-7.0 scenario in Europe, covering climate variability through multiple realizations. Isolating climate change impacts by ignoring technological change, we find large reductions in heating demand (−10% to −50%) and Southern European hydropower potentials (−10% to −40%) and increases in cooling demand ( > 100%). Based on stochastic optimizations with AnyMOD, we confirm that energy systems are highly sensitive to climate conditions, particularly on the demand side.
- 18 December 2025
- Published by IOP Publishing in Environmental Research: Energy
- Vol. 2 (4) , 041001
Open AccessClimate2Energy: a framework to consistently include climate change into energy system modeling
Supply and demand in future energy systems depend on the weather. We therefore need to quantify how climate change and variability impact energy systems. Here, we present Climate2Energy (C2E), a framework to consistently convert climate model outputs into energy system model inputs, covering all relevant types of renewable generation and demand for heating and cooling. C2E performs bias correction, uses established open-source tools where possible, and provides outputs tailored to energy system models. Moreover, C2E introduces a new hydropower model based on river discharge. We analyze dedicated hourly CESM2 Climate Model Simulations under the SSP3-7.0 scenario in Europe, covering climate variability through multiple realizations. Isolating climate change impacts by ignoring technological change, we find large reductions in heating demand (−10% to −50%) and Southern European hydropower potentials (−10% to −40%) and increases in cooling demand ( > 100%). Based on stochastic optimizations with AnyMOD, we confirm that energy systems are highly sensitive to climate conditions, particularly on the demand side.
- Open Access
Climate change impacts on net load under technological uncertainty in European power systems
Renewable energy sources play a major role in future net-zero energy systems. However, achieving energy system resilience remains challenging, since renewables depend on weather fluctuations, and future energy systems are subject to major design uncertainty. Existing literature mostly treats these types of uncertainty separately. Therefore, the assessment of uncertainties surrounding climate change and energy system design, and particularly their interactions, is insufficiently understood. To close this gap, we evaluate net load to assess energy system stress without relying on perfect foresight, while maintaining temporal and spatial correlations of the climate system. Net load is calculated from hourly historical and future climate model data translated to energy variables. To scope the extent of plausible energy systems, we consider eight different design scenarios inspired by the European Ten-Year Network Development Plan (TYNDP) and different levels of transmission expansion. We find that climate change impacts on net load are highly sensitive to the energy system design, implying that energy systems can be designed so that they are either hindered or helped by climate change. Furthermore, within a system scenario, climate change can change the frequency and seasonality of high net load events and their technological and meteorological composition. Wind-dominated systems with currently electrified heating levels, for instance, feature a 30% increase of high net load events under climate change, mostly in summer and fall, while fully electrified net zero systems are impacted by high net load events in winter and spring, which decrease by 50% with climate change. Our work thus calls for a wider perspective on energy-climate stress that captures the non-linear interactions of climate change and system design uncertainty, thereby overcoming the current focus on cold Dunkelflauten.
Open AccessClimate change impacts on net load under technological uncertainty in European power systems
Renewable energy sources play a major role in future net-zero energy systems. However, achieving energy system resilience remains challenging, since renewables depend on weather fluctuations, and future energy systems are subject to major design uncertainty. Existing literature mostly treats these types of uncertainty separately. Therefore, the assessment of uncertainties surrounding climate change and energy system design, and particularly their interactions, is insufficiently understood. To close this gap, we evaluate net load to assess energy system stress without relying on perfect foresight, while maintaining temporal and spatial correlations of the climate system. Net load is calculated from hourly historical and future climate model data translated to energy variables. To scope the extent of plausible energy systems, we consider eight different design scenarios inspired by the European Ten-Year Network Development Plan (TYNDP) and different levels of transmission expansion. We find that climate change impacts on net load are highly sensitive to the energy system design, implying that energy systems can be designed so that they are either hindered or helped by climate change. Furthermore, within a system scenario, climate change can change the frequency and seasonality of high net load events and their technological and meteorological composition. Wind-dominated systems with currently electrified heating levels, for instance, feature a 30% increase of high net load events under climate change, mostly in summer and fall, while fully electrified net zero systems are impacted by high net load events in winter and spring, which decrease by 50% with climate change. Our work thus calls for a wider perspective on energy-climate stress that captures the non-linear interactions of climate change and system design uncertainty, thereby overcoming the current focus on cold Dunkelflauten.
- Open Access
- 21 October 2025
- Published by Copernicus GmbH in Weather and Climate Dynamics
- Vol. 6 (4) , 1147-1177
Estimating return periods for extreme events in climate models through Ensemble Boosting
With climate change, extremes such as heatwaves, heavy precipitation events, droughts and extreme fire weather have become more frequent in different regions of the world. It is therefore crucial to further their physical understanding, but due to their rarity in both observational and climate modeling samples, this remains challenging. For numerical simulations, one way to overcome this under-sampling problem is Ensemble Boosting, which uses perturbed initial conditions of extreme events in an existing reference climate model simulation to efficiently generate physically consistent trajectories of very rare extremes in climate models. However, it has not yet been possible to estimate the return periods of these simulations, since the conditional resampling alters the probabilistic link between the boosted simulations and the underlying original climate simulation they come from. Here, we introduce a statistical framework to estimate return periods for these simulations by using probabilities conditional on the shared antecedent conditions between the reference and perturbed simulations. We validate this framework with a simple red-noise process and find the typical time scale at which one could expect to sample stronger extremes. This is then applied to simulations of the fully-coupled climate model CESM2: first for a pre-industrial control simulation, and then in present-day conditions, where, as an example, we estimate the return period of the record-shattering 2021 Pacific Northwest heatwave to be 2500 [2000–4000] years. Our evaluation of the method shows that return periods estimated from Ensemble Boosting are consistent with those of a 4000-year control simulation, while using approximately 6 times less computational resources. We thus outline the usage of Ensemble Boosting as an efficient tool for gaining statistical information on rare extremes. This could be valuable as a complement to existing storyline approaches, but also as an additional method of estimating return periods for real-life extreme events within a climate model context.
- 21 October 2025
- Published by Copernicus GmbH in Weather and Climate Dynamics
- Vol. 6 (4) , 1147-1177
Open AccessEstimating return periods for extreme events in climate models through Ensemble Boosting
With climate change, extremes such as heatwaves, heavy precipitation events, droughts and extreme fire weather have become more frequent in different regions of the world. It is therefore crucial to further their physical understanding, but due to their rarity in both observational and climate modeling samples, this remains challenging. For numerical simulations, one way to overcome this under-sampling problem is Ensemble Boosting, which uses perturbed initial conditions of extreme events in an existing reference climate model simulation to efficiently generate physically consistent trajectories of very rare extremes in climate models. However, it has not yet been possible to estimate the return periods of these simulations, since the conditional resampling alters the probabilistic link between the boosted simulations and the underlying original climate simulation they come from. Here, we introduce a statistical framework to estimate return periods for these simulations by using probabilities conditional on the shared antecedent conditions between the reference and perturbed simulations. We validate this framework with a simple red-noise process and find the typical time scale at which one could expect to sample stronger extremes. This is then applied to simulations of the fully-coupled climate model CESM2: first for a pre-industrial control simulation, and then in present-day conditions, where, as an example, we estimate the return period of the record-shattering 2021 Pacific Northwest heatwave to be 2500 [2000–4000] years. Our evaluation of the method shows that return periods estimated from Ensemble Boosting are consistent with those of a 4000-year control simulation, while using approximately 6 times less computational resources. We thus outline the usage of Ensemble Boosting as an efficient tool for gaining statistical information on rare extremes. This could be valuable as a complement to existing storyline approaches, but also as an additional method of estimating return periods for real-life extreme events within a climate model context.
- Open Access
- 13 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-40
Comment on egusphere-2025-525
With climate change, extremes such as heatwaves, heavy precipitation events, droughts and extreme fire weather have become more frequent in different regions of the world. It is therefore crucial to further their physical understanding, but due to their rarity in both observational and climate modeling samples, this remains challenging. For numerical simulations, one way to overcome this under-sampling problem is Ensemble Boosting, which uses perturbed initial conditions of extreme events in an existing reference climate model simulation to efficiently generate physically consistent trajectories of very rare extremes in climate models. However, it has not yet been possible to estimate the return periods of these simulations, since the conditional resampling alters the probabilistic link between the boosted simulations and the underlying original climate simulation they come from. Here, we introduce a statistical framework to estimate return periods for these simulations by using probabilities conditional on the shared antecedent conditions between the reference and perturbed simulations. This theoretical framework is applied to simulations of the fully-coupled climate model CESM2: first for a pre-industrial control simulation, and then in present-day conditions, where, as an example, we estimate the return period of the record-shattering 2021 Pacific Northwest heatwave to be 2500 years, with a 95 % confidence interval of about 2000 to 4000 years. Our evaluation of the method shows that return periods estimated from Ensemble Boosting are consistent with those of a 4000-year control simulation, while using approximately 6 times less computational resources. We thus outline the usage of Ensemble Boosting as an efficient tool for gaining statistical information on rare extremes. This could be valuable as a complement to existing storyline approaches, but also as an additional method of estimating return periods for real-life extreme events within a climate model context.
- 13 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-40
Open AccessComment on egusphere-2025-525
With climate change, extremes such as heatwaves, heavy precipitation events, droughts and extreme fire weather have become more frequent in different regions of the world. It is therefore crucial to further their physical understanding, but due to their rarity in both observational and climate modeling samples, this remains challenging. For numerical simulations, one way to overcome this under-sampling problem is Ensemble Boosting, which uses perturbed initial conditions of extreme events in an existing reference climate model simulation to efficiently generate physically consistent trajectories of very rare extremes in climate models. However, it has not yet been possible to estimate the return periods of these simulations, since the conditional resampling alters the probabilistic link between the boosted simulations and the underlying original climate simulation they come from. Here, we introduce a statistical framework to estimate return periods for these simulations by using probabilities conditional on the shared antecedent conditions between the reference and perturbed simulations. This theoretical framework is applied to simulations of the fully-coupled climate model CESM2: first for a pre-industrial control simulation, and then in present-day conditions, where, as an example, we estimate the return period of the record-shattering 2021 Pacific Northwest heatwave to be 2500 years, with a 95 % confidence interval of about 2000 to 4000 years. Our evaluation of the method shows that return periods estimated from Ensemble Boosting are consistent with those of a 4000-year control simulation, while using approximately 6 times less computational resources. We thus outline the usage of Ensemble Boosting as an efficient tool for gaining statistical information on rare extremes. This could be valuable as a complement to existing storyline approaches, but also as an additional method of estimating return periods for real-life extreme events within a climate model context.
- Open Access
- 31 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-40
Comment on egusphere-2025-525
With climate change, extremes such as heatwaves, heavy precipitation events, droughts and extreme fire weather have become more frequent in different regions of the world. It is therefore crucial to further their physical understanding, but due to their rarity in both observational and climate modeling samples, this remains challenging. For numerical simulations, one way to overcome this under-sampling problem is Ensemble Boosting, which uses perturbed initial conditions of extreme events in an existing reference climate model simulation to efficiently generate physically consistent trajectories of very rare extremes in climate models. However, it has not yet been possible to estimate the return periods of these simulations, since the conditional resampling alters the probabilistic link between the boosted simulations and the underlying original climate simulation they come from. Here, we introduce a statistical framework to estimate return periods for these simulations by using probabilities conditional on the shared antecedent conditions between the reference and perturbed simulations. This theoretical framework is applied to simulations of the fully-coupled climate model CESM2: first for a pre-industrial control simulation, and then in present-day conditions, where, as an example, we estimate the return period of the record-shattering 2021 Pacific Northwest heatwave to be 2500 years, with a 95 % confidence interval of about 2000 to 4000 years. Our evaluation of the method shows that return periods estimated from Ensemble Boosting are consistent with those of a 4000-year control simulation, while using approximately 6 times less computational resources. We thus outline the usage of Ensemble Boosting as an efficient tool for gaining statistical information on rare extremes. This could be valuable as a complement to existing storyline approaches, but also as an additional method of estimating return periods for real-life extreme events within a climate model context.
- 31 March 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-40
Open AccessComment on egusphere-2025-525
With climate change, extremes such as heatwaves, heavy precipitation events, droughts and extreme fire weather have become more frequent in different regions of the world. It is therefore crucial to further their physical understanding, but due to their rarity in both observational and climate modeling samples, this remains challenging. For numerical simulations, one way to overcome this under-sampling problem is Ensemble Boosting, which uses perturbed initial conditions of extreme events in an existing reference climate model simulation to efficiently generate physically consistent trajectories of very rare extremes in climate models. However, it has not yet been possible to estimate the return periods of these simulations, since the conditional resampling alters the probabilistic link between the boosted simulations and the underlying original climate simulation they come from. Here, we introduce a statistical framework to estimate return periods for these simulations by using probabilities conditional on the shared antecedent conditions between the reference and perturbed simulations. This theoretical framework is applied to simulations of the fully-coupled climate model CESM2: first for a pre-industrial control simulation, and then in present-day conditions, where, as an example, we estimate the return period of the record-shattering 2021 Pacific Northwest heatwave to be 2500 years, with a 95 % confidence interval of about 2000 to 4000 years. Our evaluation of the method shows that return periods estimated from Ensemble Boosting are consistent with those of a 4000-year control simulation, while using approximately 6 times less computational resources. We thus outline the usage of Ensemble Boosting as an efficient tool for gaining statistical information on rare extremes. This could be valuable as a complement to existing storyline approaches, but also as an additional method of estimating return periods for real-life extreme events within a climate model context.