Giorgio Arriga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Giorgio Arriga has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Federico Rossetti
Department of Science Roma Tre University Rome Italy
5 shared publications - Domenico Cosentino
Dipartimento di Scienze Università degli Studi Roma Tre Rome Italy
4 shared publications - Philippe Claeys
Archaeology, Environmental Changes & Geo-Chemistry, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussel, Belgium
4 shared publications Mauro Brilli
3 shared publicationsSumiko Tsukamoto
3 shared publicationsChuan-Chou Shen
2 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 27 (10)
Fault‐Related Carbonates as Quaternary Seismotectonic and Paleoclimate Archives (Monte Marine Fault, Central Apennines)
Seismogenic faults shape continental landscapes, drive crustal deformation and influence fluid exchange between the lithosphere and atmosphere. Yet, quantitative links between fault activity, exhumation and near‐surface environmental evolution remain poorly understood. Here, structural (meso‐ and micro‐scale) investigations are integrated with carbonate geochemistry and geochronology to reconstruct the long‐term spatio‐temporal evolution of seismogenic faulting along the Monte Marine normal fault (MMNF) in the central Apennines, Italy. Field investigations and sampling of exhumed fault zones were complemented by analyses of faults exposed in paleoseismological trenches, together preserving carbonate mineralizations and cataclasites formed at different crustal depths and during successive stages of fault evolution. Carbon and oxygen stable isotope analyses (δ 13 C, δ 18 O), clumped isotope thermometry (Δ 47 ) and carbonate geochronology (U‐Th, 14 C dating) distinguish three structural and geochemical groups, spanning deeply exhumed fault zones, shallow fault‐related carbonates, and near‐surface carbonate concretions. Meteoric‐derived footwall mineralizations along the MMNF record structurally controlled fluid flow from at least ∼481 ka, up to the Holocene surface‐rupture record preserved in paleoseismological trenches (ca. 5.3–4.0 ka cal BC), pointing to long‐lived, spatially distributed seismogenic activity. These data also constrain a maximum average exhumation rate of ∼1.57 ± 0.30 mm/yr across the fault system since ∼0.5 Ma. By linking fault‐zone carbonate archives from exhumed structures with those exposed in paleoseismological trenches, this study provides a quantitative framework for reconstructing long‐term fluid circulation, seismogenic fault activity and paleoclimatic conditions, tracing the evolution of fault–fluid systems across structural levels, from deeply exhumed fault zones to active surface ruptures in extensional mountain belts.
- 7 October 2026
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 27 (10)
Open AccessFault‐Related Carbonates as Quaternary Seismotectonic and Paleoclimate Archives (Monte Marine Fault, Central Apennines)
Seismogenic faults shape continental landscapes, drive crustal deformation and influence fluid exchange between the lithosphere and atmosphere. Yet, quantitative links between fault activity, exhumation and near‐surface environmental evolution remain poorly understood. Here, structural (meso‐ and micro‐scale) investigations are integrated with carbonate geochemistry and geochronology to reconstruct the long‐term spatio‐temporal evolution of seismogenic faulting along the Monte Marine normal fault (MMNF) in the central Apennines, Italy. Field investigations and sampling of exhumed fault zones were complemented by analyses of faults exposed in paleoseismological trenches, together preserving carbonate mineralizations and cataclasites formed at different crustal depths and during successive stages of fault evolution. Carbon and oxygen stable isotope analyses (δ 13 C, δ 18 O), clumped isotope thermometry (Δ 47 ) and carbonate geochronology (U‐Th, 14 C dating) distinguish three structural and geochemical groups, spanning deeply exhumed fault zones, shallow fault‐related carbonates, and near‐surface carbonate concretions. Meteoric‐derived footwall mineralizations along the MMNF record structurally controlled fluid flow from at least ∼481 ka, up to the Holocene surface‐rupture record preserved in paleoseismological trenches (ca. 5.3–4.0 ka cal BC), pointing to long‐lived, spatially distributed seismogenic activity. These data also constrain a maximum average exhumation rate of ∼1.57 ± 0.30 mm/yr across the fault system since ∼0.5 Ma. By linking fault‐zone carbonate archives from exhumed structures with those exposed in paleoseismological trenches, this study provides a quantitative framework for reconstructing long‐term fluid circulation, seismogenic fault activity and paleoclimatic conditions, tracing the evolution of fault–fluid systems across structural levels, from deeply exhumed fault zones to active surface ruptures in extensional mountain belts.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Tectonic exhumation of the Corinth Rift (Greece): preliminary results from low-temperature carbonate luminescence thermochronology
Understanding how continental rifts propagate requires resolving the interactions between tectonic and geodynamic processes operating over different timescales. The Corinth Rift in southern Greece provides a natural laboratory in which active subduction, back-arc extension, and inherited crustal structures interact within a rapidly evolving continental rift system. The rift architecture is characterized by shallow-dipping low-angle normal faults (LANFs), such as the Chelmos Fault, in the south, and a series of high-angle normal faults (HANFs) that developed in the hanging walls of the LANFs toward the north. Stratigraphic and volcanic records suggest two main rifting phases: an early phase between ~5.0 and ~2.0 Ma and a younger phase from ~2.0 Ma to the present. However, the timing and propagation of fault development remain poorly constrained due to the lack of direct tectonic and exhumation data from carbonate rocks. Here, we apply low-temperature carbonate thermochronology to footwall samples from major faults to quantitatively constrain tectonic exhumation across the Corinth Rift. Our preliminary results suggest that rifting initiated during the Early Pliocene with activity along low-angle detachments and subsequently migrated northward to distributed high-angle normal faulting since the Early Pleistocene. Consistent with stratigraphic and volcanic constraints, our data support a two-stage rift evolution and provide independent constraints on the timing and spatial propagation of faulting. More broadly, this study demonstrates the potential of carbonate thermochronology as a quantitative tool for constraining tectonic exhumation in carbonate-dominated rift systems worldwide.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessTectonic exhumation of the Corinth Rift (Greece): preliminary results from low-temperature carbonate luminescence thermochronology
Understanding how continental rifts propagate requires resolving the interactions between tectonic and geodynamic processes operating over different timescales. The Corinth Rift in southern Greece provides a natural laboratory in which active subduction, back-arc extension, and inherited crustal structures interact within a rapidly evolving continental rift system. The rift architecture is characterized by shallow-dipping low-angle normal faults (LANFs), such as the Chelmos Fault, in the south, and a series of high-angle normal faults (HANFs) that developed in the hanging walls of the LANFs toward the north. Stratigraphic and volcanic records suggest two main rifting phases: an early phase between ~5.0 and ~2.0 Ma and a younger phase from ~2.0 Ma to the present. However, the timing and propagation of fault development remain poorly constrained due to the lack of direct tectonic and exhumation data from carbonate rocks. Here, we apply low-temperature carbonate thermochronology to footwall samples from major faults to quantitatively constrain tectonic exhumation across the Corinth Rift. Our preliminary results suggest that rifting initiated during the Early Pliocene with activity along low-angle detachments and subsequently migrated northward to distributed high-angle normal faulting since the Early Pleistocene. Consistent with stratigraphic and volcanic constraints, our data support a two-stage rift evolution and provide independent constraints on the timing and spatial propagation of faulting. More broadly, this study demonstrates the potential of carbonate thermochronology as a quantitative tool for constraining tectonic exhumation in carbonate-dominated rift systems worldwide.
- Open Access
- 2 April 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 6 (1) , 1-14
Dolomite luminescence thermochronometry reconstructs the low-temperature exhumation history of carbonate rocks in the central Apennines, Italy
The lack of available thermochronological methods has so far hampered reconstructions of the cooling and exhumation histories in carbonate rock regions. Here we develop a new trapped charge thermochronometry tool based on the thermoluminescence signal of dolomite. It has a closure temperature range of 45–75 °C and is applicable to carbonate domains with cooling rates of 2–200 °C per million years. This new thermochronometric technique is tested in the central Apennines, where seismogenic, carbonate-hosted normal faulting controls regional neotectonics. Thermoluminescence dating is applied along the northeastern shoulder of the Late Pliocene-Quaternary L’Aquila Intermontane Basin, at the footwall of the extensional Monte Marine Fault. Dolomite samples from the bedrock have a mean thermoluminescence age of 4.60 ± 0.35 millions of years, whereas dolomite clasts within the fault damage zone have a mean thermoluminescence age of 2.53 ± 0.13 millions of years. These new thermoluminescence ages, corroborated by the existing stratigraphic constraints, (i) provide the first direct, low-temperature exhumation ages of the carbonate bedrocks in the central Apennines; (ii) constrain the activity of the basin boundary faults along the northeastern shoulder of the L’Aquila Intermontane Basin. Our study demonstrates the potential of dolomite luminescence thermochronometry in reconstructing the low-temperature cooling/exhumation history of carbonate bedrocks.
- 2 April 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 6 (1) , 1-14
Open AccessDolomite luminescence thermochronometry reconstructs the low-temperature exhumation history of carbonate rocks in the central Apennines, Italy
The lack of available thermochronological methods has so far hampered reconstructions of the cooling and exhumation histories in carbonate rock regions. Here we develop a new trapped charge thermochronometry tool based on the thermoluminescence signal of dolomite. It has a closure temperature range of 45–75 °C and is applicable to carbonate domains with cooling rates of 2–200 °C per million years. This new thermochronometric technique is tested in the central Apennines, where seismogenic, carbonate-hosted normal faulting controls regional neotectonics. Thermoluminescence dating is applied along the northeastern shoulder of the Late Pliocene-Quaternary L’Aquila Intermontane Basin, at the footwall of the extensional Monte Marine Fault. Dolomite samples from the bedrock have a mean thermoluminescence age of 4.60 ± 0.35 millions of years, whereas dolomite clasts within the fault damage zone have a mean thermoluminescence age of 2.53 ± 0.13 millions of years. These new thermoluminescence ages, corroborated by the existing stratigraphic constraints, (i) provide the first direct, low-temperature exhumation ages of the carbonate bedrocks in the central Apennines; (ii) constrain the activity of the basin boundary faults along the northeastern shoulder of the L’Aquila Intermontane Basin. Our study demonstrates the potential of dolomite luminescence thermochronometry in reconstructing the low-temperature cooling/exhumation history of carbonate bedrocks.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Tectono-Stratigraphic Evolution of a propagating extensional fault network: Insights from the L’Aquila Intermontane Basin, Central Apennines
Understanding the long-term tectono-stratigraphic evolution of active extensional faulting is key to deciphering how continental rifting propagates over time and space. The Pliocene-Quaternary L’Aquila Intermontane Basin (AIB) in the central Apennines serves as an ideal natural laboratory for investigating this process. Seismicity in the AIB is linked to NW-SE striking normal faults that have accommodated crustal stretching since the Late Pliocene. This study integrates fieldwork, mineralogical, geochemical (C-O stable and clumped isotopes), and geochronological (⁴⁰Ar/³⁹Ar, U-Th) analyses to explore the structural connection between the Mount Pettino Fault (MPF) and the Paganica Fault, two active, left-stepping basin boundary faults. The research proposes a two-stage tectono-stratigraphic evolution reflecting a shift from localized to distributed deformation and fault linkage. Stage-1 (pre-Middle Pleistocene) marks the nucleation and growth of the MPF, characterized by a ∼5 m thick fault core of isotopically closed cataclasite (T (∆47) ∼33–50°C). Stage-2 involves the development of a distributed fault zone linking the MPF and the Paganica Fault via a transfer zone. This zone facilitated meteoric fluid circulation, carbonate veining, and travertine formation (T (∆47) ∼8°C). U-Th dating of Stage-2 mineralizations constrains tectonic activity in the transfer zone to ∼182–331 ka. These findings provide insights into the tectono-stratigraphic evolution of the AIB and its seismotectonic behaviour, with implications on the regional geodynamic reconstructions.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessTectono-Stratigraphic Evolution of a propagating extensional fault network: Insights from the L’Aquila Intermontane Basin, Central Apennines
Understanding the long-term tectono-stratigraphic evolution of active extensional faulting is key to deciphering how continental rifting propagates over time and space. The Pliocene-Quaternary L’Aquila Intermontane Basin (AIB) in the central Apennines serves as an ideal natural laboratory for investigating this process. Seismicity in the AIB is linked to NW-SE striking normal faults that have accommodated crustal stretching since the Late Pliocene. This study integrates fieldwork, mineralogical, geochemical (C-O stable and clumped isotopes), and geochronological (⁴⁰Ar/³⁹Ar, U-Th) analyses to explore the structural connection between the Mount Pettino Fault (MPF) and the Paganica Fault, two active, left-stepping basin boundary faults. The research proposes a two-stage tectono-stratigraphic evolution reflecting a shift from localized to distributed deformation and fault linkage. Stage-1 (pre-Middle Pleistocene) marks the nucleation and growth of the MPF, characterized by a ∼5 m thick fault core of isotopically closed cataclasite (T (∆47) ∼33–50°C). Stage-2 involves the development of a distributed fault zone linking the MPF and the Paganica Fault via a transfer zone. This zone facilitated meteoric fluid circulation, carbonate veining, and travertine formation (T (∆47) ∼8°C). U-Th dating of Stage-2 mineralizations constrains tectonic activity in the transfer zone to ∼182–331 ka. These findings provide insights into the tectono-stratigraphic evolution of the AIB and its seismotectonic behaviour, with implications on the regional geodynamic reconstructions.
- 23 December 2024
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 43 (12)
Long‐Term Tectono‐Stratigraphic Evolution of a Propagating Rift System, L’Aquila Intermontane Basin (Central Apennines)
Understanding the long‐term tectono‐stratigraphic evolution of active extensional faulting is crucial for unraveling the mode through which continental rifting propagates in space and time. The Pliocene‐Quaternary L’Aquila Intermontane Basin (AIB) in central Apennines offers a natural laboratory for studying a propagating continental rift. Seismicity is related to NW‐SE‐striking normal faults that have been accommodating crustal stretching since the Late Pliocene. Through a multidisciplinary approach integrating field, mineralogical, geochemical (C‐O stable and clumped isotopes) and geochronological (40Ar/39Ar, U‐Th) analyses, this study focuses on the structural connection between the Mount Pettino Fault (MPF) and the Paganica Fault, two active, left‐stepped basin boundary faults of the AIB. A two‐stage tectono‐stratigraphic evolution is proposed during transition from localized to delocalized deformation and fault linkage. Stage‐1 (pre‐Middle Pleistocene) corresponds to nucleation and growth of the MPF, characterized by a ∼5 m thick exhumed fault core, consisting of an isotopically closed cataclasite (T (∆47) ∼33–50°C). Stage‐2 corresponds to the development of a distributed zone of NW‐SE and E‐W extensional faulting in the overlay zone with the Paganica Fault, which is interpreted as a transfer zone linking the basin boundary faults, with maximum long‐term slip rates comparable to those of the connected faults. Structurally controlled circulation of meteoric fluids promoted carbonate veining and travertine formation (T (∆47) ∼8°C). U‐Th carbonate dating of Stage‐2 mineralizations constrains the tectonic activity in the transfer zone at least at ∼182–331 ka. Implications on the tectono‐stratigraphic evolution and on the seismotectonic scenario of the AIB are discussed, providing geodynamic inference at regional scale.
- 23 December 2024
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 43 (12)
Long‐Term Tectono‐Stratigraphic Evolution of a Propagating Rift System, L’Aquila Intermontane Basin (Central Apennines)
Understanding the long‐term tectono‐stratigraphic evolution of active extensional faulting is crucial for unraveling the mode through which continental rifting propagates in space and time. The Pliocene‐Quaternary L’Aquila Intermontane Basin (AIB) in central Apennines offers a natural laboratory for studying a propagating continental rift. Seismicity is related to NW‐SE‐striking normal faults that have been accommodating crustal stretching since the Late Pliocene. Through a multidisciplinary approach integrating field, mineralogical, geochemical (C‐O stable and clumped isotopes) and geochronological (40Ar/39Ar, U‐Th) analyses, this study focuses on the structural connection between the Mount Pettino Fault (MPF) and the Paganica Fault, two active, left‐stepped basin boundary faults of the AIB. A two‐stage tectono‐stratigraphic evolution is proposed during transition from localized to delocalized deformation and fault linkage. Stage‐1 (pre‐Middle Pleistocene) corresponds to nucleation and growth of the MPF, characterized by a ∼5 m thick exhumed fault core, consisting of an isotopically closed cataclasite (T (∆47) ∼33–50°C). Stage‐2 corresponds to the development of a distributed zone of NW‐SE and E‐W extensional faulting in the overlay zone with the Paganica Fault, which is interpreted as a transfer zone linking the basin boundary faults, with maximum long‐term slip rates comparable to those of the connected faults. Structurally controlled circulation of meteoric fluids promoted carbonate veining and travertine formation (T (∆47) ∼8°C). U‐Th carbonate dating of Stage‐2 mineralizations constrains the tectonic activity in the transfer zone at least at ∼182–331 ka. Implications on the tectono‐stratigraphic evolution and on the seismotectonic scenario of the AIB are discussed, providing geodynamic inference at regional scale.
- Open Access
- 11 November 2024
- Published by Springer Nature in Research Square
Dolomite thermochronometry applied in central Apennines: a novel tool for tectonic reconstruction in carbonate rocks
The lack of appropriate thermochronological methods has so far hampered reconstructions of the exhumation/cooling history in carbonate rock regions. In this study, we propose a novel thermochronological tool based on the dolomite thermoluminescence (TL) dating. The closure temperature of the TL peak of dolomite at 360°C is estimated to be 50–70°C. The high saturation characteristics of this signal indicate that the dolomite TL is effective in regions with cooling rates as low as 5°C/Ma. This novel thermochronometry is tested in the central Apennines, where seismogenic, carbonate-hosted normal faults control the neotectonics of the region. Samples collected at the footwall of the Monte Marine Fault show that the dolomite clasts in the fault zone and dolomitized bedrocks forming the northeastern shoulder of the L’Aquila Intermontane Basin have TL ages spanning from 3.57 ± 0.34 to 2.41 ± 0.17 Ma. These new TL ages: (i) provide the first direct age of the onset of the post-orogenic extension in the region, allowing to constrain the long-term evolution of seismogenic faulting in central Apennines, and (ii) demonstrate the potential of dolomite luminescence thermochronometry to reconstruct the exhumation/cooling history of carbonate bedrocks.
- 11 November 2024
- Published by Springer Nature in Research Square
Open AccessDolomite thermochronometry applied in central Apennines: a novel tool for tectonic reconstruction in carbonate rocks
The lack of appropriate thermochronological methods has so far hampered reconstructions of the exhumation/cooling history in carbonate rock regions. In this study, we propose a novel thermochronological tool based on the dolomite thermoluminescence (TL) dating. The closure temperature of the TL peak of dolomite at 360°C is estimated to be 50–70°C. The high saturation characteristics of this signal indicate that the dolomite TL is effective in regions with cooling rates as low as 5°C/Ma. This novel thermochronometry is tested in the central Apennines, where seismogenic, carbonate-hosted normal faults control the neotectonics of the region. Samples collected at the footwall of the Monte Marine Fault show that the dolomite clasts in the fault zone and dolomitized bedrocks forming the northeastern shoulder of the L’Aquila Intermontane Basin have TL ages spanning from 3.57 ± 0.34 to 2.41 ± 0.17 Ma. These new TL ages: (i) provide the first direct age of the onset of the post-orogenic extension in the region, allowing to constrain the long-term evolution of seismogenic faulting in central Apennines, and (ii) demonstrate the potential of dolomite luminescence thermochronometry to reconstruct the exhumation/cooling history of carbonate bedrocks.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
The long-term evolution of Monte Marine and Monte Pettino seismogenic faults: tectono-stratigraphic, isotopic, and chronological constraints
The central Apennines are a Cenozoic fold-and-thrust belt that has been affected by post-orogenic extension in its axial region since the end of the early Pliocene (ca. 4 Ma). Post-orogenic extension generated several intermontane basins bounded by high-angle normal faults, striking NW-SE, subparallel to the backbone of the chain. The Monte Pettino and the Monte Marine seismogenic faults (MPF, MMF) are the boundary faults of the western portion of the late Pliocene-Quaternary L’Aquila intermontane basin. Their long-term activity is typified by exhumed fault cores that coexist with active fault strands localised at the fault hanging walls, providing evidence of a polyphase tectonic activity. The fault cores are decorated by diffuse dolomitization, which indicates structurally controlled fluid-flow and metasomatism. To constrain the long-term (space-time) evolution of the MPF-MMF faults, we integrated fieldwork, stable isotope systematics (δ18O, δ13C and Δ47), carbonate thermoluminescence and U-Th dating. Our results highlight two main tectonic phases, with different structural evolution and fluid-rock interaction. The first phase corresponds to the development of a major cataclastic zone, defined by meter-thick, SW-dipping (65-70°), fault cores exposed at the piedmont of the MPF-MMF ridges. The C-O systematics of the cataclasite and of the associated calcite slickenfibers, which are in the range of the carbonate bedrock, indicate a "closed" system behaviour during fault nucleation and development. Preliminary results from Δ47 thermometry of syn-kinematic carbonate structures indicate temperatures of 34 ± 2 °C. Thermoluminescence dating of dolomite clasts in the fault zone indicates age in the range of 3.0 – 3.4 Ma, whilst the cataclastic fault core is younger (< 800 ka). The second phase is mainly recorded in upper Pleistocene sedimentary Breccias (ca. 350 ka) which unconformably cover the bedrock and the exhumed fault cores at the SE termination of the MPF. It consists of anastomosed, high-angle WNW-ESE striking fault strands, spaced meters apart and with cm-m displacements, associated with carbonate veining and travertines. Stable isotopes measured from the fault slickenfibers, carbonate veins and travertines show negative δ13C and δ18O values, suggesting a depositional system dominated by meteoric fluid ("open" system) with an important contribution of organic carbon. Travertines and veins precipitated at colder temperatures (12 ± 4 °C), in the range of the average local air temperatures, thus excluding precipitation from a hydrothermal circuit. Moreover, their U-Th ages range between 182 and 331 ka, compatible with the temporal constraints from stratigraphic data. Structural and isotopic results do not support tectonic reactivation of the cataclastic core of the MPF during the middle-late Pleistocene, confirming the stratigraphic evidence. Our results provide the first absolute age constraint on the post-orogenic extensional faulting in the L’Aquila basin, demonstrating a two-stage fault activity, characterised by a change from localised (from ca. 3 to ca. 0.8 Ma) to delocalised faulting (200-300 ka to present). We infer that this change in the style of extensional faulting was consequence of the evolving rheological structure of the fault zones, primarily regulated by the feedback and interactions involving structurally-controlled fluid flow, rock metasomatism and cataclastic processes in space and time.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessThe long-term evolution of Monte Marine and Monte Pettino seismogenic faults: tectono-stratigraphic, isotopic, and chronological constraints
The central Apennines are a Cenozoic fold-and-thrust belt that has been affected by post-orogenic extension in its axial region since the end of the early Pliocene (ca. 4 Ma). Post-orogenic extension generated several intermontane basins bounded by high-angle normal faults, striking NW-SE, subparallel to the backbone of the chain. The Monte Pettino and the Monte Marine seismogenic faults (MPF, MMF) are the boundary faults of the western portion of the late Pliocene-Quaternary L’Aquila intermontane basin. Their long-term activity is typified by exhumed fault cores that coexist with active fault strands localised at the fault hanging walls, providing evidence of a polyphase tectonic activity. The fault cores are decorated by diffuse dolomitization, which indicates structurally controlled fluid-flow and metasomatism. To constrain the long-term (space-time) evolution of the MPF-MMF faults, we integrated fieldwork, stable isotope systematics (δ18O, δ13C and Δ47), carbonate thermoluminescence and U-Th dating. Our results highlight two main tectonic phases, with different structural evolution and fluid-rock interaction. The first phase corresponds to the development of a major cataclastic zone, defined by meter-thick, SW-dipping (65-70°), fault cores exposed at the piedmont of the MPF-MMF ridges. The C-O systematics of the cataclasite and of the associated calcite slickenfibers, which are in the range of the carbonate bedrock, indicate a "closed" system behaviour during fault nucleation and development. Preliminary results from Δ47 thermometry of syn-kinematic carbonate structures indicate temperatures of 34 ± 2 °C. Thermoluminescence dating of dolomite clasts in the fault zone indicates age in the range of 3.0 – 3.4 Ma, whilst the cataclastic fault core is younger (< 800 ka). The second phase is mainly recorded in upper Pleistocene sedimentary Breccias (ca. 350 ka) which unconformably cover the bedrock and the exhumed fault cores at the SE termination of the MPF. It consists of anastomosed, high-angle WNW-ESE striking fault strands, spaced meters apart and with cm-m displacements, associated with carbonate veining and travertines. Stable isotopes measured from the fault slickenfibers, carbonate veins and travertines show negative δ13C and δ18O values, suggesting a depositional system dominated by meteoric fluid ("open" system) with an important contribution of organic carbon. Travertines and veins precipitated at colder temperatures (12 ± 4 °C), in the range of the average local air temperatures, thus excluding precipitation from a hydrothermal circuit. Moreover, their U-Th ages range between 182 and 331 ka, compatible with the temporal constraints from stratigraphic data. Structural and isotopic results do not support tectonic reactivation of the cataclastic core of the MPF during the middle-late Pleistocene, confirming the stratigraphic evidence. Our results provide the first absolute age constraint on the post-orogenic extensional faulting in the L’Aquila basin, demonstrating a two-stage fault activity, characterised by a change from localised (from ca. 3 to ca. 0.8 Ma) to delocalised faulting (200-300 ka to present). We infer that this change in the style of extensional faulting was consequence of the evolving rheological structure of the fault zones, primarily regulated by the feedback and interactions involving structurally-controlled fluid flow, rock metasomatism and cataclastic processes in space and time.