PGPietro Giaretta

Pietro Giaretta

*This is an algorithmically generated author record based on publicly available information.

Pietro Giaretta has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Stony Debris Flows and Impact Forces on Bridge Piers: Insights from small-scale Laboratory Experiments

    by Andrea Cao, Pietro Giaretta, Paolo Salandin

    Debris flows are among the most devastating natural hazards in mountainous areas, posing a significant threat to infrastructure, particularly bridges that are crucial for regional connectivity. Climate change-induced increases in intense rainfall events have amplified both the frequency and magnitude of these sediment-laden flows. Consequently, bridge structures face growing exposure to extreme loading conditions. Bridge piers situated within active riverbeds are especially vulnerable, as debris flows generate highly impulsive forces that can surpass those accounted for in traditional design methodologies.A reliable estimation of debris-flow-induced thrust on bridge piers is essential to improve existing design methodologies and to ensure resilience of infrastructure in debris-flow-prone environments.To address this critical need, an innovative experimental apparatus has been developed to investigate the impact of stony debris flows under controlled laboratory conditions. This setup reproduces both the initiation and propagation phases of debris flows, enabling a more comprehensive analysis of their dynamics and impact forces.Experiments were conducted in a tilting flume measuring 3 m in length and 0.3 m in width. The flume features an erodible granular bed, allowing debris flows to initiate and evolve through bed erosion, closely mimicking the mechanisms observed in natural settings. This design significantly enhances the realism of the experimental simulations.Within this framework, particular attention is devoted to the investigation of debris flows propagating under subcritical flow conditions, a regime that has received comparatively limited attention in experimental studies but may be relevant for specific geomorphological and hydraulic contexts.Debris flows are initiated by the controlled release of a predetermined water discharge, which induces sediment mobilization and subsequent flow development along the channel. The experimental setup is instrumented with pressure transducers, sonar sensors, and load cells to measure flow depth, velocity, and impact forces exerted on model bridge piers of varying geometries and dimensions.A dimensionless analysis carried out to characterize the flow regime reproduced in the laboratory indicates that the experimental conditions successfully reproduce a stony debris flow in terms of flow composition and propagation dynamics.Following the preliminary comparison between measured impact forces and those predicted by classical hydrostatic and hydrodynamic theoretical models presented at EGU 2025, an integrated hydraulic model that combines the two approaches is proposed. This model is used to interpret a set of experimental results that has now more than doubled in size. Model parameters are calibrated using an Orthogonal Distance Regression (ODR) procedure, which allows for the joint consideration of uncertainties in both experimental observations and theoretical predictions.Overall, the findings provide novel experimental insights into debris-flow impact processes under subcritical conditions and demonstrate the capability of integrated modeling approaches in predicting debris-flow-induced forces on bridge piers. These results contribute to the validation and refinement of existing design models, while supporting the development of more reliable, physically based design criteria for bridges exposed to debris-flow hazards.

  • Open Access

    Modeling Local Scour Dynamics to Assess Existing Bridge Resilience in the Context of Climate Change

    by Pietro Giaretta, Paolo Salandin

    River crossings are vulnerable to extreme flood events, which pose significant risks to both linear infrastructure functioning and surrounding communities. The proper functioning of bridges is crucial for preventing cascading effects on populations, ensuring the mobility of emergency response teams, and facilitating the evacuation of residents during critical events. As vital links between communities on opposite banks of the river, bridge safety has significant implications for social and economic stability.Hydraulic phenomena account for over 50% of bridge failures (e.g. Xiong et al., 2023), and scouring around piers and abutments always causes serious damages if adequate foundation depth is not provided in the design. Lacks in scientific and technical knowledges have led in the past to inadequate piers and foundations, and this issue, combined with the increased frequency of hazardous events due to the climate change, amplifies the risk of failure.A robust prediction of scour evolution up to its maximum depth is fundamental for understanding and forecasting bridge failures, as well as for properly managing infrastructure in the context of climate change. Here, the physical processes governing scour evolution, specifically the temporal behavior of flow field and shear stress, have been thoroughly analyzed by combining physical modeling of sediment-flow-structures interaction with numerical simulations.The experiments have been developed in a rectangular flume 1 m wide and 15 m long, using quite uniform sands (median grain size d50=0.4 mm) to simulate the riverbed. Experiments of different duration were developed under steady state clear water conditions and adhering to Shields similitude to obtain the scour evolution over time around circular piers. Numerical simulations were developed using 3D CFD software to accurately reproduce the coherent turbulent structures around the pier at scour depths obtained from physical experiments.This approach, combining and interconnecting physical and numerical experiments, enhances our understanding of how climate change and the consequent increase in flood event frequency impact on the temporal evolution of flow field and shear stresses as the scour progresses. This improved comprehension of the phenomena is crucial for the management of existing bridges that may have been inadequately designed in the past, as well as for the design of new structures.

  • Open Access

    Predicting Mountain Bridge Damage from Increasing Frequency of Debris Flow Dynamic Impacts

    by Andrea Cao, Pietro Giaretta, Paolo Salandin

    Mountainous regions, due to their topographical characteristics, require a high density of bridges to connect road and railway infrastructures that support human activities. Climate change exacerbates the intensity and frequency of extreme events, seriously threatening bridge safety and infrastructure availability.Among various hazards, debris flows are one of the most destructive phenomena in Alpine regions. Their destructive nature is due to the high velocities they achieve, the large volumes of sediment they mobilize, and the significant impact forces they exert on any obstacles in their path. When debris flows impact bridges, they often result in destruction. The unpredictability of these events, coupled with inadequate early warning systems and the huge amount of materials involved, frequently leads to loss of human life and significant economic damage.Bridge piers, due to their location in stream beds, are extremely vulnerable to the impulsive nature of sediment flows and are subjected to the most severe impact forces. Understanding the thrust generated by debris flows on bridge structures is essential for designing works capable of withstanding their impact. This knowledge is crucial for defining appropriate design methodologies for bridges, accurately accounting for the dynamic forces exerted on piers.This study presents a new experimental apparatus designed to provide accurate information on the dynamic thrust of stony debris flows on bridge piers. The debris flow is simulated in a tilted canal measuring 3 m in length and 0.3 m in width. A model bridge pier and associated impulsive force measuring equipment are installed at the channel's end section. Strategically placed sonar sensors along the canal, combined with pressure sensors and load cells, enable a comprehensive characterization of the debris flows that is triggered by suddenly releasing a pre-set water discharge onto a layer of previously saturated erodible material.The results from the physical model experiments enabled a systematic study of the magnitude of dynamic forces acting on piers of various shapes and how these forces are influenced by the different physical parameters characteristic of debris flows. Analysis of the collected data provided insights that allow for an assessment of the predictive formulas proposed in the literature. This leads to a deeper understanding of the risk of mountain bridge damage, which is increasingly affected by debris flows in the present context of climate change.

  • Open Access

    Bridge Failure and Consequences: the Existing Infrastructures Need of Mitigation Techniques

    by Pietro Giaretta, Paolo Salandin

    Bridges represent a critical issue in case of hazardous events, like extreme floods and debris flows, being their proper operation of fundamental relevance to avoid cascading effects on population.The reduction of the risk of failure of river crossings is fundamental to ensure the service given by the infrastructural network for the safety of the populations. The serviceability of the road and railway network must be guaranteed during hazardous events, when the efficiency of the infrastructure becomes fundamental to ensure the mobility of the rescue and a possible evacuation of the inhabitants during critical situations. Moreover, the safety of the bridge affects the surrounding environment with impacts on social and economic activities, representing a connection between different populations living along the sides of the river.Hydraulic phenomena are responsible of more than 50% of bridge failure (e.g. Montalvo et al., 2020; Wardhana & Hadipriono, 2003), and scouring around piers and abutments always causes serious damages if proper deepening of foundation is not provided in the design. These aspects are exacerbated due to the climate change that in the last decades increases the frequency of extreme events, occurring flood events more often than in the past (e.g. Seneviratne et al., 2021). Lacks in scientific and technical knowledges have led in the past to the realization of inadequate foundations, and this fact joined with the occurrence of hazardous events in the climate change context, amplifies the risk of failure of bridges. However, many bridges realized in the past are actually still working probably thanks to the ancient custom of filling the riverbed around bridge piers and abutments with stones and boulders after relevant flood events as an empirical maintenance technique.Therefore, the effectiveness of the described technique to reduce the risk of failure needs to be investigated to establish its effectiveness. Here this is done by physical modelling of the sediment-flow-structures interaction, technique that leads the possibility to check the performances of countermeasures like riprap mattresses, investigating the size of the boulders, the lined area, and their durability over time.The experiments have been developed in a rectangular flume 1 m wide and 15 m long, using quite uniform sands (median grain size d50=0.4mm) to simulate the riverbed. Different pier geometries and water depths are considered in the experiments developed in steady state clear water conditions. According to the Froude and Shields similitudes, different arrangements and boulders size have been tested, evaluating the scour evolution in long time experiments.The effectiveness of the aforementioned maintenance techniques is analysed to understand the reduction of the risk of failure of bridges to limit the resulting cascading effects.

  • Open Access

    Mitigation strategies against seawater intrusion in the context of climate change

    by Paolo Salandin, Enrica Belluco, Matteo Camporese, Elena Crestani, Giovanna Darvini, Pietro Giaretta, Giulia Mazzarotto

    In coastal regions, where about 40% of world population is settled, freshwater aquifers are affected by a saltwater intrusion. The presence of elevate salt concentrations, among the most common pollutants in groundwater aquifers, represents a world-wide spread problem for coastal areas, such as Mediterranean coasts, both East and West coasts in the U. S., Gulf of Mexico and Middle East coasts. The seriousness of the situation is enhanced by the high demand of water supply, especially in the drier periods, and by the mean sea-level rise due to climate change. So that seawater will encroach farther inland and will threaten the available fresh groundwater supply, affecting not only human livelihood, but also coastal ecosystems. The form and transformation of the seaward hydraulic gradient of the aquifer and a constant freshwater discharge into the sea are fundamental in order to control the rate of intrusion.To maintain the seaward gradient in the system the aquifer may be artificially recharged by freshwater by increasing the inland piezometric heads. The purpose of this solution is to create a hydraulic barrier against the inland flow of saline water by injecting freshwater in the vicinity of the shoreline. For phreatic aquifers both injection wells and surface spreading of water, such as irrigation, may be applied. Surface reservoirs, lakes and canals can be used as recharge systems for unconfined aquifers through freshwater infiltration (Hussain et al., 2019).To assess the effectiveness of this mitigation approach and the amount of volumes of freshwater required, physical experiments are developed in a laboratory canal developed to reproduce a controlled heterogeneous porous media.The sandbox measures 500 cm long by 30 cm wide by 60 cm high, with 3 cm thick plexiglass walls. Two tanks are located upstream and downstream from the sandbox, with volumes of about 0.5 m3 and 2.0 m3, respectively. The upstream tank is filled with fresh-water and is continuously supplied by a small pump, providing fresh-water recharge. The downstream tank is filled with salt-water, previously prepared by adding salt to fresh-water till a proper density is reached, and it represents the sea. This canal has been used in previous works (Bouzaglou et al., 2018, Crestani et al., 2022), but in the present the homogeneous porous media has been substituted by three different nominal size ranges of glass beads, equal to 0.3-0.4, 0.4-0.8 and 1.0-1.3 mm respectively, organized in 250 cells, each of size 20x30x5 cm3 to reproduce a prescribed statistical anisotropic structure.The evidences deduced from the physical experiments developed simulating the seawater intrusion-retreat phenomenon due to drought periods are discussed in comparison with the results of a numerical model.


  • Open Access

    A large-scale laboratory experiment of seawater intrusion in heterogeneous aquifers affected by drought periods

    by Paolo Salandin, Enrica Belluco, Luigi Bottegal, Matteo Camporese, Elena Crestani, Giovanna Darvini, Pietro Giaretta, Tommaso Trentin

    Most density-dependent flow and transport models assume homogeneity of natural aquifers, a strong simplification with respect to reality, while subsurface formations are known to have spatially variable properties (e.g. Freeze, 1975). Previous studies of saltwater intrusion in heterogeneous aquifers have considered mainly macro-scale geological structures, but the effects of local heterogeneities on density-dependent flow and transport are known to be highly affected by spatially correlated distributions of hydraulic conductivities (e.g., Dagan and Zeitoun, 1998, Prasad and Simmons, 2003, Li et al., 2022). Moreover, investigations have been performed mainly via numerical modeling and, to the best of our knowledge, only in one case numerical results have been compared with physical evidence from laboratory reproduction of a heterogeneous media (Koch and Starke, 2001).The present work describes the design and the realization activities developed to reproduce a controlled heterogeneous porous media in a laboratory flume, aimed at defining the influence of the hydraulic conductivity spatial variability on the density-dependent transport in coastal phreatic aquifers.The sandbox measures 500 cm long by 30 cm wide by 60 cm high, with 3 cm thick plexiglass walls. Two tanks are located upstream and downstream of the sandbox, with volumes of approximately 0.5 m3 and 2.0 m3, respectively. The upstream tank is filled with fresh-water and is continuously supplied by a small pump, providing fresh-water recharge. The downstream tank is filled with salt-water, previously prepared by adding salt to fresh-water till a proper density is reached, and it represents the sea. In both tanks the level is maintained constant via two spillways, whose height can be adjusted. The discharge through the downstream spillway can be measured.The flume has been used in previous works (Bouzaglou et al., 2018, Crestani et al., 2022), but here the homogeneous porous media has been substituted by three different nominal size ranges of glass beads, equal to 0.3-0.4, 0.4-0.8 and 1.0-1.3 mm respectively, organized in 250 cells, each of size 20x30x5 cm3 to reproduce a prescribed statistical anisotropic structure (Figure 1).Figure 1- Sandbox 3D view from upstream (left side) to downstream (right side)After a preliminary analysis carried out by constant head permeameter tests on each glass beads nominal size range, the hydraulic characterization of the whole heterogeneous formation has been developed considering the filtration process that affects different thicknesses of the aquifer (10, 20, 30, 40 cm) forced by three upstream-downstream head differences (2, 4 and 6 cm).During the saltwater intrusion experiment a water level difference upstream - downstream of 2 cm has been maintained for 8 days, introducing two separate drought periods (about 8 and 10 hours) at the end of the second and of the third days respectively.The findings from the heterogeneous media characterization and the seawater advance-retreat phenomenon are discussed in comparison with the results of a numerical model.This study has been co-funded by the Interreg Italy–Croatia CBC Programme 2014–2020 (Priority Axes: Safety and Resilience) through the ERDF as a part of the projects MoST (AID: 10047742) and SeCure (AID: 10419304).